Columns repeating in excel sheet
Hi guys,
I am trying to download context data into excel file using WD binary cache. I am using Office 2003 suite for this case. The text data is getting downloaded properly but all numeric data (though there actual data type is string) is getting repeated in adjacent column with "agg" getting concatenated in the column heading. can somebody help me out.
Thanks,
Hi
Are you sure that the contents of the cell in Excel are actually in the expoential format? Look in the formula bar at the top - does this display the 12 digit number or does it display the expoential text?
Excel will display any number with more than 11 digits as and exponent when the cell format is General. To force it to display the full number do the following:
1. Select the cell or range of cells this applies to
2. From the menubar select Format | Cells
3. Change the category from General to Number
4. Select the other fomratting options such as decimal places, seperators etc and click OK.
Please note that your columns will need to be wide enough to display the 12 digits otherwise Excel will just display a series of '#' characters.
As a general rule of thumb in Excel, what you see in a cell is the formatted version of the cell contents and not necessarily what the cell actually holds.
Hope this helps
Andy
Similar Messages
-
Problem while exporting ALV column header to excel sheet.
Hi,
I am able to export an ALV grid details to an excel sheet. But the ALV column headers when exported to excel sheet are getting truncated.
For eg: if my column header in ALV grid is displayed as 'Material' then the column header in excel sheet is 'Mater' only. Remaining portion is getting truncated.
How can I view the entire column header text?
Kindly assist.
Thanks.I have the same problem with you, when user export to excel. I fixed it by using
w_layo-colwidth_optimize = 'X'. <<<<<<<<<<<<This
perform generate_fcat_reftab
using 'PRUEFLOS' 'T_INPUT' '' '' 'Inspection Lot' 0.
form generate_fcat_reftab using p_fieldname
p_tabname
p_ref_tabname
p_ref_fieldname
p_output_text
p_output_lenght.
clear w_fcat.
w_fcat-fieldname = p_fieldname.
w_fcat-tabname = p_tabname.
w_fcat-ref_fieldname = p_ref_fieldname.
w_fcat-ref_tabname = p_ref_tabname.
w_fcat-seltext_s = p_output_text.
w_fcat-seltext_m = p_output_text.
w_fcat-seltext_l = p_output_text.
w_fcat-outputlen = p_output_lenght.
w_fcat-ddictxt = 'L'. <<<<<<<<<<<<<<<<<<This
append w_fcat to t_fcat.
endform. -
How do I get the last COLUMN in an Excel Sheet using Report Generation toolkit in LV7.1?
I am trying to get the last column in an Excel sheet using the Report Generation toolkit. The function "Excel Get Last Row" does not give last column info. Is there a function that will do this?
ThanksHello –
I think the following example program might be helpful to get you started programming your application.
Get Excel Data from Specified Field.
Hope this helps!
SVences
Applications Engineer
National Instruments -
Increase the column lengths of excel sheet through abap
I developed a abap program and it was displayed the output.
So i need to display this out put in excel sheet.
for that I read the out put and placed in the excel,
the only problem is the column lengths are small
after download i am dragging the each column,
But i need to increase the each column by the program
How can I ?
I am using the following code
lastline = new_line_c + 13.
DO .
READ LINE sy-index LINE VALUE INTO it_read-excel.
APPEND it_read.
IF sy-index > lastline.
EXIT.
ENDIF.
ENDDO.
lastline = new_line_c - 38.
colm = ( length - 37 ) / 18.
colm = colm + 4.
FOR THE EXCEL CONVERTION
INCLUDE ole2incl.
DATA: w_cell1 TYPE ole2_object,
w_cell2 TYPE ole2_object.
*--- Ole data Declarations
DATA: h_excel TYPE ole2_object, " Excel object
h_mapl TYPE ole2_object, " list of workbooks
h_map TYPE ole2_object, " workbook
h_zl TYPE ole2_object, " cell
h_f TYPE ole2_object, " font
gs_interior TYPE ole2_object, " Pattern
worksheet TYPE ole2_object,
h_cell TYPE ole2_object,
h_merge TYPE ole2_object,
h_cell1 TYPE ole2_object,
range TYPE ole2_object,
h_sheet2 TYPE ole2_object,
h_sheet3 TYPE ole2_object,
gs_font TYPE ole2_object,
flg_stop(1) TYPE c.
*DATA: t_excel_bckord LIKE t_excel OCCURS 0 WITH HEADER LINE,
*t_excel_bcklog LIKE t_excel OCCURS 0 WITH HEADER LINE,
*t_excel_blkord LIKE t_excel OCCURS 0 WITH HEADER LINE.
TYPES: data1(1500) TYPE c,
ty TYPE TABLE OF data1.
DATA: it TYPE ty WITH HEADER LINE,
it_2 TYPE ty WITH HEADER LINE,
it_3 TYPE ty WITH HEADER LINE,
rec TYPE sy-tfill,
deli(1) TYPE c,
l_amt(18) TYPE c.
DATA: BEGIN OF hex,
tab TYPE x,
END OF hex.
FIELD-SYMBOLS: <fs> .
CONSTANTS cns_09(2) TYPE n VALUE 09.
ASSIGN deli TO <fs> TYPE 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
DATA gv_sheet_name(20) TYPE c .
M A C R O Declaration
DEFINE ole_check_error.
if &1 ne 0.
message e001(zz) with &1.
exit.
endif.
END-OF-DEFINITION.
DATA: xy TYPE i,
xz TYPE i,
yz TYPE i,
ab TYPE i,
pterm TYPE i.
IF h_excel-header = space OR h_excel-handle = -1.
start Excel
CREATE OBJECT h_excel 'EXCEL.APPLICATION'.
ENDIF.
PERFORM err_hdl.
*--- get list of workbooks, initially empty
CALL METHOD OF h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
SET PROPERTY OF h_excel 'Visible' = 1.
add a new workbook
CALL METHOD OF h_mapl 'Add' = h_map.
PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Price Comparison List'.
GET PROPERTY OF h_excel 'ACTIVESHEET' = worksheet.
SET PROPERTY OF worksheet 'Name' = gv_sheet_name .
index1 = 3.
LOOP AT it_read.
heading
IF sy-tabix < 4.
it_item = it_read.
IF it_item CS '-----'.
CLEAR it_item.
APPEND it_item.
ELSE.
IF sy-tabix = 1.
it_item+0(1) = deli.
ENDIF.
APPEND it_item.
ENDIF.
ENDIF.
headear data and item
IF sy-tabix > 4 AND sy-tabix < descline1.
it_item = it_read.
IF it_item CS '----'.
ELSE.
REPLACE ALL OCCURRENCES OF sy-vline IN it_item WITH deli.
APPEND it_item.
ENDIF.
ENDIF.
xy = 2.
xz = 38.
discount etc
IF sy-tabix >= descline1 AND sy-tabix < descline.
it_item = it_read.
it_item+12(1) = deli.
it_item+22(1) = deli.
it_item+43(1) = deli.
WHILE xy < colm.
xz = xz + 18.
it_item+xz(1) = deli.
xy = xy + 1.
ENDWHILE.
APPEND it_item.
ENDIF.
payment terms
xy = 2.
xz = 37.
pterm = descline + 6.
IF sy-tabix > descline AND sy-tabix < pterm.
it_item = it_read.
IF it_item CS '-----'.
CLEAR it_item.
APPEND it_item.
ELSE.
it_item+12(1) = deli.
it_item+15(1) = deli.
it_item+36(1) = deli.
WHILE xy < colm.
xz = xz + 17.
it_item+xz(1) = deli.
xy = xy + 1.
ENDWHILE.
APPEND it_item.
ENDIF.
ENDIF.
prepared by
lastline = pterm + 3.
IF sy-tabix >= pterm AND sy-tabix <= lastline.
it_item = it_read.
IF it_item CS '-----'.
ELSE.
it_item+0(1) = deli.
it_item+54(1) = ' '.
it_item+16(1) = deli.
APPEND it_item.
ENDIF.
ENDIF.
remaarks
yz = lastline + 10.
IF sy-tabix > lastline AND sy-tabix <= yz.
it_item = it_read.
it_item+0(1) = deli.
it_item+54(1) = ' '.
APPEND it_item.
ENDIF.
approved by
ab = yz + 5.
IF sy-tabix > yz AND sy-tabix < ab.
it_item = it_read.
IF it_item CS '-----'.
ELSE.
it_item+0(1) = deli.
it_item+54(1) = ' '.
it_item+14(1) = deli.
APPEND it_item.
ENDIF.
ENDIF.
ENDLOOP.
*--Formatting the area of additional data 1 and doing the BOLD
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the second row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 2
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the fourth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 4
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the fifth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 5
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the sixth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 6
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
DATA l_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>clipboard_export
IMPORTING
data = it_item[]
CHANGING
rc = l_rc
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
OTHERS = 4.
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = 1.
PERFORM err_hdl.
CALL METHOD OF h_excel 'Range' = range
EXPORTING
#1 = w_cell1
#2 = w_cell2.
CALL METHOD OF range 'Select'.
PERFORM err_hdl.
CALL METHOD OF worksheet 'Paste'.
PERFORM err_hdl.
CALL METHOD OF h_excel 'QUIT'.
FREE OBJECT h_zl.
FREE OBJECT h_mapl.
FREE OBJECT h_map.
FREE OBJECT h_excel.Hello Ravi,
Thank you very much for your suggestions.. but still have some more doubts:
What i want to do is :
-->call report in background job with a selection criteria.
-->the output of the report should be trasnsfered to excel sheet
-->then the excel sheet should be sent to XI..
My doubts are:
-> is it possible with every report or we need some extra code to achieve this
-> If yes, then how exactly it should be done. can you please explain in more detail.
Thank you very much for your help.
Best Regards,
Jasmeet -
Unknown column in the excel sheet created using Export to Excel
Hi,
I created an excelsheet for the table data using the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/exporting%20context%20data%20into%20excel%20using%20the%20web%20dynpro%
20Binary%20Cache.pdf
but problem here is when i open the excel sheet it is having some unknown columns apart from the expected like amount/#agg next to the actual column amount and it is happening only for the cloumns which have some numbers.
I dont know where these columns are coming from.
Send me the solution and points will be rewarded for the helpful answers.
I want to put some name to the excel file instead of using system created file name.for this requirement where do i need to change the codeHi,
You can export to excel even not relating with any libraries
Follow this way..
Take one singleDimensional array, arrColNames[], and one Two dimensional array, arrValues[][].
File f=new File("Sample.xls);
FileOutputStream fos=new FileOutputStream(f);
for(int i=0;i<arrColNames.length;i++)
fos.write(arrLabels<i>.getBytes());
fos.write("\t".getBytes());
fos.write("\n".getBytes());
for(int j=0;j<noOfRows;j++)
String arr[]=arrValues[j];
for(int a=0;a<arr.length;a++)
if(arr[a]!=null)
fos.write(arr[a].getBytes());
fos.write("\t".getBytes());
fos.write("\n".getBytes());
fos.flush();
fos.close();
The exported excelFile will be stored in your server. If you want to open it using FileDownLoad UI Element,
Create value attributes resource of type Resource, behaviour of type FileDownLoadBehaviour, reso of type String, fileName of type String , Then then append this code
FileInputStream fis=new FileInputStream(f);
FileChannel fc=fis.getChannel();
byte data[]=new byte[(int)fc.size()];
ByteBuffer bb=ByteBuffer.wrap(data);
fc.read(bb);
fis.close();
IWDCachedWebResource objCachedWebresource=null;
if(data!=null)
objCachedWebresource=WDWebResource.getWebResource
(data,WDWebResourceType.XLS);
objCachedWebresource.setResourceName(f.getName());
wdContext.currentContextElement().setFileName(f.getName());
wdContext.currentContextElement().setResource(objCachedWebresource);
wdContext.currentContextElement().setReso(objCachedWebresource.getAbsoluteURL());
wdContext.currentContextElement().setBehaviour(WDFileDownloadBehaviour.ALLOW_SAVE);
Regards
LN -
Need help in writing NVARCHAR2 column to an excel sheet
Hi All,
I have a NVARCHAR2 column in my table. I want to store the data present in the column into an excel file. When i write the data to an excel file the data is getting converted to some other form. It's not in human readable form.
Language is not fixed for the column.
I need help in storing the NVARCHAR2 data into an excel file without any implicit conversion done by the oracle.
Please help.
Thanks,
Girish G
Edited by: Girish G on Jul 14, 2011 2:02 AMExport data to BLOB (csv)
-
Fixed column length in excel sheet thru abap program
HI Experts ,
I am sending 2 excel attachments from abap program to external email Id's .
Excel attachments are successfully sending but the columns in the excel attachmet are compressed .
I want to fix some width for excel columns .
Please provide your help and suggest .
Thanks,
NusratHi All ,
Thanks for the reply ,..
I am using below function module to send a mail with excel attachment , I would like to use the same code instead of OLE .. Could you please let me know how to modify the column lenght using this module .
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = gd_doc_data
put_in_outbox = 'X'
sender_address = 'Traking System'
sender_address_type = 'INT'
commit_work = 'X'
IMPORTING
sent_to_all = gd_sent_all
TABLES
packing_list = it_packing_list
contents_bin = it_attachment
contents_txt = it_message
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Thanks ,
Nusrat -
Unable to download the data perfectly into excel sheet
Hi Frnds,
when i am trying to download the data from the output of a report into excel, some of the records(line items/rows) are getting stored in one of column of the excel sheet. Fog eg: my report outputs 500 line items. In excel after 100 rows the next 5-10 records/rows are storing in one column. so at the end of excel sheet i may not find total 500 records/line items.
Plz suggest me how to handle this.
Thnks,
Pavan*& Report ZETA_EXCEL_DOWNLOAD_CLIPBOARD *
report zeta_excel_download_clipboard .
include ole2incl.
data: w_cell1 type ole2_object,
w_cell2 type ole2_object.
*--- Ole data Declarations
data: h_excel type ole2_object, " Excel object
h_mapl type ole2_object, " list of workbooks
h_map type ole2_object, " workbook
h_zl type ole2_object, " cell
h_f type ole2_object, " font
gs_interior type ole2_object, " Pattern
worksheet type ole2_object,
h_cell type ole2_object,
h_cell1 type ole2_object,
range type ole2_object,
h_sheet2 type ole2_object,
h_sheet3 type ole2_object,
gs_font type ole2_object,
flg_stop(1) type c.
Internal table Declaration
data: begin of t_excel occurs 0,
vkorg(20) type c, "Sales Org
vbtyp(20) type c, "Document Category
auart(20) type c, "Document Type
ernam(20) type c, "Created By
vbeln(20) type c, "Document Number
posnr(20) type c, "Item Number
erdat(20) type c, "Created Date
vdatu(20) type c, "Header Requested Delivery Date
reqdat(20) type c, "Request date
condat(20) type c, "Confirm date
lifsk(20) type c, "Header Block
txt30(30) type c, "Order User Status Description
lifsp(20) type c, "Line Block
dispo(20) type c, "MRP Controller
dsnam(20) type c, "MRP Controller Description
vmsta(20) type c, "Material Sales Status
kunnr(20) type c, "Sold To
cname(35) type c, "Sold To Name
regio(20) type c, "State
cufd(10) type c, "CUD
bstnk(20) type c, "PO#
bsark(20) type c, "Ordering Method
matnr(20) type c, "Material
maktx(35) type c, "Material Description
t200(20) type c, "T200
vtext(20) type c, "T200 Description
matkl(20) type c, "Material Group
zzbomind(7) type c, "BOM Indicator
ostat(20) type c, "Order Status
cmgst(20) type c, "CRD
inco1(20) type c, "Incoterms
oqty(20) type c, "Order Quantity
pqty(20) type c, "Open Quantity
unit(20) type c, "UOM
onet(20) type c, "Order Value
pnet(20) type c, "Open Value
curr(20) type c, "Currency key
so_bezei like tvkbt-bezei,"Sales Office
sg_bezei like tvgrt-bezei,"Sales Group
bname(20) type c, "Ordering Party
contact(20) type c, "Contact Name
telf1(20) type c, "Contact telf1
reqqty(20) type c, "Item Request qty
reqval(20) type c, "Item Request value
conqty(20) type c, "Item Confirm qty
conval(20) type c, "Item Confirm value
zzrev(02) type c, "Revenue recognition acceptance
bezei(20) type c, "Revenue recognition text
vgbel(20) type c, "Reference Order for RETURNS
0008text(255) type c, "Internal Order Comment Text
end of t_excel.
data: t_excel_bckord like t_excel occurs 0 with header line,
t_excel_bcklog like t_excel occurs 0 with header line,
t_excel_blkord like t_excel occurs 0 with header line.
types: data1(1500) type c,
ty type table of data1.
data: it type ty with header line,
it_2 type ty with header line,
it_3 type ty with header line,
rec type sy-tfill,
deli(1) type c,
l_amt(18) type c.
data: begin of hex,
tab type x,
end of hex.
field-symbols: <fs> .
constants cns_09(2) type n value 09.
assign deli to <fs> type 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
data gv_sheet_name(20) type c .
M A C R O Declaration
define ole_check_error.
if &1 ne 0.
message e001(zz) with &1.
exit.
endif.
end-of-definition.
t_excel_bckord-vkorg = 'ABC'.
t_excel_bckord-vbtyp = 'DEF'.
t_excel_bckord-auart = 'GHI'.
t_excel_bckord-ernam = 'JKL'.
t_excel_bckord-vbeln = 'MNO'.
t_excel_bckord-0008text = 'XYZ'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC1'.
t_excel_bckord-vbtyp = 'DEF1'.
t_excel_bckord-auart = 'GHI1'.
t_excel_bckord-ernam = 'JKL1'.
t_excel_bckord-vbeln = 'MNO1'.
t_excel_bckord-0008text = 'XYZ1'.
append t_excel_bckord.
t_excel_bckord-vkorg = 'ABC2'.
t_excel_bckord-vbtyp = 'DEF2'.
t_excel_bckord-auart = 'GHI2'.
t_excel_bckord-ernam = 'JKL2'.
t_excel_bckord-vbeln = 'MNO2'.
t_excel_bckord-0008text = 'XYZ2'.
append t_excel_bckord.
t_excel_bcklog-vkorg = 'ABC'.
t_excel_bcklog-vbtyp = 'DEF'.
t_excel_bcklog-auart = 'GHI'.
t_excel_bcklog-ernam = 'JKL'.
t_excel_bcklog-vbeln = 'MNO'.
t_excel_bcklog-0008text = 'XYZ'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC1'.
t_excel_bcklog-vbtyp = 'DEF1'.
t_excel_bcklog-auart = 'GHI1'.
t_excel_bcklog-ernam = 'JKL1'.
t_excel_bcklog-vbeln = 'MNO1'.
t_excel_bcklog-0008text = 'XYZ1'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC2'.
t_excel_bcklog-vbtyp = 'DEF2'.
t_excel_bcklog-auart = 'GHI2'.
t_excel_bcklog-ernam = 'JKL2'.
t_excel_bcklog-vbeln = 'MNO2'.
t_excel_bcklog-0008text = 'XYZ2'.
append t_excel_bcklog.
t_excel_bcklog-vkorg = 'ABC3'.
t_excel_bcklog-vbtyp = 'DEF3'..
t_excel_bcklog-auart = 'GHI3'.
t_excel_bcklog-ernam = 'JKL3'.
t_excel_bcklog-vbeln = 'MNO3'.
t_excel_bcklog-0008text = 'XYZ3'.
append t_excel_bcklog.
t_excel_blkord-vkorg = 'ABC'.
t_excel_blkord-vbtyp = 'DEF'.
t_excel_blkord-auart = 'GHI'.
t_excel_blkord-ernam = 'JKL'.
t_excel_blkord-vbeln = 'MNO'.
t_excel_blkord-0008text = 'XYZ'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC1'.
t_excel_blkord-vbtyp = 'DEF1'.
t_excel_blkord-auart = 'GHI1'.
t_excel_blkord-ernam = 'JKL1'.
t_excel_blkord-vbeln = 'MNO1'.
t_excel_blkord-0008text = 'XYZ1'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC2'.
t_excel_blkord-vbtyp = 'DEF2'.
t_excel_blkord-auart = 'GHI2'.
t_excel_blkord-ernam = 'JKL2'.
t_excel_blkord-vbeln = 'MNO2'.
t_excel_blkord-0008text = 'XYZ2'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC3'.
t_excel_blkord-vbtyp = 'DEF3'..
t_excel_blkord-auart = 'GHI3'.
t_excel_blkord-ernam = 'JKL3'.
t_excel_blkord-vbeln = 'MNO3'.
t_excel_blkord-0008text = 'XYZ3'.
append t_excel_blkord.
t_excel_blkord-vkorg = 'ABC4'.
t_excel_blkord-vbtyp = 'DEF4'..
t_excel_blkord-auart = 'GHI4'.
t_excel_blkord-ernam = 'JKL4'.
t_excel_blkord-vbeln = 'MNO4'.
t_excel_blkord-0008text = 'XYZ4'.
append t_excel_blkord.
loop at t_excel_bckord.
concatenate
t_excel_bckord-vkorg
t_excel_bckord-vbtyp
t_excel_bckord-auart
t_excel_bckord-ernam
t_excel_bckord-vbeln
t_excel_bckord-posnr
t_excel_bckord-erdat
t_excel_bckord-vdatu
t_excel_bckord-reqdat
t_excel_bckord-condat
t_excel_bckord-lifsk
t_excel_bckord-txt30
t_excel_bckord-lifsp
t_excel_bckord-dispo
t_excel_bckord-dsnam
t_excel_bckord-vmsta
t_excel_bckord-kunnr
t_excel_bckord-cname
t_excel_bckord-regio
t_excel_bckord-cufd
t_excel_bckord-bstnk
t_excel_bckord-bsark
t_excel_bckord-matnr
t_excel_bckord-maktx
t_excel_bckord-t200
t_excel_bckord-vtext
t_excel_bckord-matkl
t_excel_bckord-zzbomind
t_excel_bckord-ostat
t_excel_bckord-cmgst
t_excel_bckord-inco1
t_excel_bckord-oqty
t_excel_bckord-pqty
t_excel_bckord-unit
t_excel_bckord-onet
t_excel_bckord-pnet
t_excel_bckord-curr
t_excel_bckord-so_bezei
t_excel_bckord-sg_bezei
t_excel_bckord-bname
t_excel_bckord-contact
t_excel_bckord-telf1
t_excel_bckord-reqqty
t_excel_bckord-reqval
t_excel_bckord-conqty
t_excel_bckord-conval
t_excel_bckord-zzrev
t_excel_bckord-bezei
t_excel_bckord-vgbel
t_excel_bckord-0008text
into it
separated by deli.
append it.
clear it.
endloop.
loop at t_excel_bcklog.
concatenate
t_excel_bcklog-vkorg
t_excel_bcklog-vbtyp
t_excel_bcklog-auart
t_excel_bcklog-ernam
t_excel_bcklog-vbeln
t_excel_bcklog-posnr
t_excel_bcklog-erdat
t_excel_bcklog-vdatu
t_excel_bcklog-reqdat
t_excel_bcklog-condat
t_excel_bcklog-lifsk
t_excel_bcklog-txt30
t_excel_bcklog-lifsp
t_excel_bcklog-dispo
t_excel_bcklog-dsnam
t_excel_bcklog-vmsta
t_excel_bcklog-kunnr
t_excel_bcklog-cname
t_excel_bcklog-regio
t_excel_bcklog-cufd
t_excel_bcklog-bstnk
t_excel_bcklog-bsark
t_excel_bcklog-matnr
t_excel_bcklog-maktx
t_excel_bcklog-t200
t_excel_bcklog-vtext
t_excel_bcklog-matkl
t_excel_bcklog-zzbomind
t_excel_bcklog-ostat
t_excel_bcklog-cmgst
t_excel_bcklog-inco1
t_excel_bcklog-oqty
t_excel_bcklog-pqty
t_excel_bcklog-unit
t_excel_bcklog-onet
t_excel_bcklog-pnet
t_excel_bcklog-curr
t_excel_bcklog-so_bezei
t_excel_bcklog-sg_bezei
t_excel_bcklog-bname
t_excel_bcklog-contact
t_excel_bcklog-telf1
t_excel_bcklog-reqqty
t_excel_bcklog-reqval
t_excel_bcklog-conqty
t_excel_bcklog-conval
t_excel_bcklog-zzrev
t_excel_bcklog-bezei
t_excel_bcklog-vgbel
t_excel_bcklog-0008text
into it_2
separated by deli.
append it_2.
clear it_2.
endloop.
loop at t_excel_blkord.
concatenate
t_excel_blkord-vkorg
t_excel_blkord-vbtyp
t_excel_blkord-auart
t_excel_blkord-ernam
t_excel_blkord-vbeln
t_excel_blkord-posnr
t_excel_blkord-erdat
t_excel_blkord-vdatu
t_excel_blkord-reqdat
t_excel_blkord-condat
t_excel_blkord-lifsk
t_excel_blkord-txt30
t_excel_blkord-lifsp
t_excel_blkord-dispo
t_excel_blkord-dsnam
t_excel_blkord-vmsta
t_excel_blkord-kunnr
t_excel_blkord-cname
t_excel_blkord-regio
t_excel_blkord-cufd
t_excel_blkord-bstnk
t_excel_blkord-bsark
t_excel_blkord-matnr
t_excel_blkord-maktx
t_excel_blkord-t200
t_excel_blkord-vtext
t_excel_blkord-matkl
t_excel_blkord-zzbomind
t_excel_blkord-ostat
t_excel_blkord-cmgst
t_excel_blkord-inco1
t_excel_blkord-oqty
t_excel_blkord-pqty
t_excel_blkord-unit
t_excel_blkord-onet
t_excel_blkord-pnet
t_excel_blkord-curr
t_excel_blkord-so_bezei
t_excel_blkord-sg_bezei
t_excel_blkord-bname
t_excel_blkord-contact
t_excel_blkord-telf1
t_excel_blkord-reqqty
t_excel_blkord-reqval
t_excel_blkord-conqty
t_excel_blkord-conval
t_excel_blkord-zzrev
t_excel_blkord-bezei
t_excel_blkord-vgbel
t_excel_blkord-0008text
into it_3
separated by deli.
append it_3.
clear it_3.
endloop.
if h_excel-header = space or h_excel-handle = -1.
start Excel
create object h_excel 'EXCEL.APPLICATION'.
endif.
PERFORM err_hdl.
*--- get list of workbooks, initially empty
call method of h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
set property of h_excel 'Visible' = 1.
add a new workbook
call method of h_mapl 'Add' = h_map.
PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Back Orders'.
get property of h_excel 'ACTIVESHEET' = worksheet.
set property of worksheet 'Name' = gv_sheet_name .
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
data l_rc type i.
call method cl_gui_frontend_services=>clipboard_export
importing
data = it[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
PERFORM err_hdl.
CALL METHOD OF h_excel 'QUIT'.
*GV_SHEET_NAME = '2ND SHEET'.
gv_sheet_name = 'Backlog'.
get property of h_excel 'Sheets' = h_sheet2 .
call method of h_sheet2 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_2[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*GV_SHEET_NAME = '3rd SHEET'.
gv_sheet_name = 'Blocked Orders'.
get property of h_excel 'Sheets' = h_sheet3 .
call method of h_sheet3 'Add' = h_map.
set property of h_map 'Name' = gv_sheet_name .
get property of h_excel 'ACTIVESHEET' = worksheet.
*--Formatting the area of additional data 1 and doing the BOLD
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 50.
call method of h_excel 'Range' = h_cell
exporting
#1 = w_cell1
#2 = w_cell2.
get property of h_cell 'Font' = gs_font .
set property of gs_font 'Bold' = 1 .
call method cl_gui_frontend_services=>clipboard_export
importing
data = it_3[]
changing
rc = l_rc
exceptions
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
others = 4.
call method of h_excel 'Cells' = w_cell1
exporting
#1 = 1
#2 = 1.
call method of h_excel 'Cells' = w_cell2
exporting
#1 = 1
#2 = 1.
PERFORM err_hdl.
call method of h_excel 'Range' = range
exporting
#1 = w_cell1
#2 = w_cell2.
call method of range 'Select'.
PERFORM err_hdl.
call method of worksheet 'Paste'.
*--- disconnect from Excel
free object h_zl.
free object h_mapl.
free object h_map.
free object h_excel. -
BDC table control using Excel sheet upload
Hi All,
I am working BDC table control.I want to upload the From excel sheet.I am using the FM ALSM_EXCEL_TO_INTERNAL_TABLE to upload the the data into my internal table.The data is populating in the internal table.
Now i have problem tat how to populate this excel sheet data to the Bdc table control.
Can nybody help me out.\[removed by moderator\]
Thanks,
Swapna.
Edited by: Jan Stallkamp on Jul 25, 2008 10:57 AMafter fetching data from EXCEL sheet, each column data (in excel sheet) will be uploaded to individual record into your internal table along with row number and column number, loop through that internal table and collect all your excel data into record format.pls refer the below code.
data:
i_excel type alsmex_tabline occurs 0 with header line,
l_row type i value 1.
data:
begin of x_data occurs 0,
kunnr like RF02L-KUNNR,
klimk(17) type c,
CTLPC like knkk-CTLPC,
end of x_data,
begin of x_data1 occurs 0,
data(106),
end of x_data1.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = p_fname
i_begin_col = 1
i_begin_row = 1
i_end_col = no.of columns in your excel file
i_end_row = no.of rows in your file
tables
intern = i_excel.
if sy-subrc = 0.
loop at i_excel.
if l_row <> i_excel-row.
append x_data.
clear x_data.
endif.
case i_excel-col.
when 1.
x_data-kunnr = i_excel-value.
when 2.
x_data-klimk = i_excel-value.
when 3.
x_data-CTLPC = i_excel-value.
endcase.
l_row = i_excel-row.
clear i_excel.
at last.
append x_data.
endat.
endloop.
endif.
then loop through the internal table X_DATA, pass the data to your table control like.
tbl_control-field1(1) = x_data-field1.
tbl_control-field2(1) = x_data-field2.
tbl_control-fieldn(1) = x_data-fieldn.
Regards,
Sreeram. -
Issue with downloaing from ALV to Excel sheet
Hi All,
When we download the ALV Report to excel sheet, the first line/first column (A11) of excel sheet will have today's date.
Since my customer uses the excel sheet for further processing into a non-SAP system, we need to provide the excel sheet with the cell A11 (First line's firls column) as blank.
How can we deliver this requirement?
Your help will be sincerely appreciated....
Regards
PavanOne option is there
Give him 1 push button on toolbar other wise you can write below function module in
start of selection code also.
1 ) modify u r internal table according to requirement.
2) after that call WS_DOWNLOAD function module.
Check below code for u r reff.
*Modify itab according to u r requirement.
Loop at IST_DWN.
IST_DWN-KUNNR2_DESC = SPACE.
IST_DWN-KUNNR3_DESC = W_ZPPCSR-KUNNR3_DESC .
APPEND IST_DWN.
CLEAR DATE.
ENDLOOP.
*F4 Help for file menu
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = PATH.
RLGRAP-FILETYPE = 'DAT'.
Download fm
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = PATH
FILETYPE = RLGRAP-FILETYPE
MODE = XMODE
IMPORTING
FILELENGTH = L_FILELENGTH
TABLES
DATA_TAB = IST_DWN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
OTHERS = 3.
Salil ... -
Download internal table to Excel sheet
Hi,
I am trying a sampole program to download an internal table to excel and am
uisng the Fm GUI_DOWNLOAD for the same. But how do I ensure that each column
of internal will be aligned as columns in the excel sheet to. I a trying to do
that with a separator but I am not able to figure out.
Below is my code.
REPORT z_excel_download.
DATA : it_mara TYPE STANDARD TABLE OF mara WITH HEADER LINE.
DATA : BEGIN OF it_file OCCURS 0,
data(2000),
END OF it_file.
SELECT * FROM mara INTO TABLE it_mara UP TO 100 ROWS.
LOOP AT it_mara.
CONCATENATE it_mara-matnr
it_mara-ersda
it_mara-ernam
it_mara-pstat
it_mara-mtart
it_mara-mbrsh INTO it_file-data SEPARATED BY '/t'.
APPEND it_file.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = 'C:\Documents and Settings\XXXXXX\Desktop\test.xls'
TABLES
data_tab = it_file
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks.Hi Varun,
On SDN are plenty of post where you can find the answer to your problem.
Please try the following code that I found here several years ago to resolve your problem.
Regards,
Eric
REPORT Excel.
TABLES:
sflight.
* header data................................
DATA :
header1 LIKE gxxlt_p-text VALUE 'Suresh',
header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
* Internal table for holding the SFLIGHT data
DATA BEGIN OF t_sflight OCCURS 0.
INCLUDE STRUCTURE sflight.
DATA END OF t_sflight.
* Internal table for holding the horizontal key.
DATA BEGIN OF t_hkey OCCURS 0.
INCLUDE STRUCTURE gxxlt_h.
DATA END OF t_hkey .
* Internal table for holding the vertical key.
DATA BEGIN OF t_vkey OCCURS 0.
INCLUDE STRUCTURE gxxlt_v.
DATA END OF t_vkey .
* Internal table for holding the online text....
DATA BEGIN OF t_online OCCURS 0.
INCLUDE STRUCTURE gxxlt_o.
DATA END OF t_online.
* Internal table to hold print text.............
DATA BEGIN OF t_print OCCURS 0.
INCLUDE STRUCTURE gxxlt_p.
DATA END OF t_print.
* Internal table to hold SEMA data..............
DATA BEGIN OF t_sema OCCURS 0.
INCLUDE STRUCTURE gxxlt_s.
DATA END OF t_sema.
* Retreiving data from sflight.
SELECT * FROM sflight
INTO TABLE t_sflight.
* Text which will be displayed online is declared here....
t_online-line_no = '1'.
t_online-info_name = 'Created by'.
t_online-info_value = 'SURESH KUMAR PARVATHANENI'.
APPEND t_online.
* Text which will be printed out..........................
t_print-hf = 'H'.
t_print-lcr = 'L'.
t_print-line_no = '1'.
t_print-text = 'This is the header'.
APPEND t_print.
t_print-hf = 'F'.
t_print-lcr = 'C'.
t_print-line_no = '1'.
t_print-text = 'This is the footer'.
APPEND t_print.
* Defining the vertical key columns.......
t_vkey-col_no = '1'.
t_vkey-col_name = 'MANDT'.
APPEND t_vkey.
t_vkey-col_no = '2'.
t_vkey-col_name = 'CARRID'.
APPEND t_vkey.
t_vkey-col_no = '3'.
t_vkey-col_name = 'CONNID'.
APPEND t_vkey.
t_vkey-col_no = '4'.
t_vkey-col_name = 'FLDATE'.
APPEND t_vkey.
* Header text for the data columns................
t_hkey-row_no = '1'.
t_hkey-col_no = 1.
t_hkey-col_name = 'PRICE'.
APPEND t_hkey.
t_hkey-col_no = 2.
t_hkey-col_name = 'CURRENCY'.
APPEND t_hkey.
t_hkey-col_no = 3.
t_hkey-col_name = 'PLANETYPE'.
APPEND t_hkey.
t_hkey-col_no = 4.
t_hkey-col_name = 'SEATSMAX'.
APPEND t_hkey.
t_hkey-col_no = 5.
t_hkey-col_name = 'SEATSOCC'.
APPEND t_hkey.
t_hkey-col_no = 6.
t_hkey-col_name = 'PAYMENTSUM'.
APPEND t_hkey.
* populating the SEMA data..........................
t_sema-col_no = 1.
t_sema-col_typ = 'STR'.
t_sema-col_ops = 'DFT'.
APPEND t_sema.
t_sema-col_no = 2.
APPEND t_sema.
t_sema-col_no = 3.
APPEND t_sema.
t_sema-col_no = 4.
APPEND t_sema.
t_sema-col_no = 5.
APPEND t_sema.
t_sema-col_no = 6.
APPEND t_sema.
t_sema-col_no = 7.
APPEND t_sema.
t_sema-col_no = 8.
APPEND t_sema.
t_sema-col_no = 9.
APPEND t_sema.
t_sema-col_no = 10.
t_sema-col_typ = 'NUM'.
t_sema-col_ops = 'ADD'.
APPEND t_sema.
CALL FUNCTION 'XXL_FULL_API'
EXPORTING
* DATA_ENDING_AT = 54
* DATA_STARTING_AT = 5
filename = 'TESTFILE'
header_1 = header1
header_2 = header2
no_dialog = 'X'
no_start = ' '
n_att_cols = 6
n_hrz_keys = 1
n_vrt_keys = 4
sema_type = 'X'
* SO_TITLE = ' '
TABLES
data = t_sflight
hkey = t_hkey
online_text = t_online
print_text = t_print
sema = t_sema
vkey = t_vkey
EXCEPTIONS
cancelled_by_user = 1
data_too_big = 2
dim_mismatch_data = 3
dim_mismatch_sema = 4
dim_mismatch_vkey = 5
error_in_hkey = 6
error_in_sema = 7
file_open_error = 8
file_write_error = 9
inv_data_range = 10
inv_winsys = 11
inv_xxl = 12
OTHERS = 13
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Hello all,
I am transferring the ALV output from SAP to Excel sheet using the standard button i.e. To Local FIle.... but i am not getting the text of the last column in the excel sheet. the last column is being displayed empty where as its heading is being displayed....
Regards.
Sabah...Go through the code and Execute it on your system, I think this will do for you.
In this code I used 3 radio buttons in my selection screen:
If u selects the first radio button your out put shows into to the Excel sheet.
If u selects the second radio button your out put shows the in the Editor screen.
If u clicks the third radio button your output shows into the Excel as well as in the Editor.
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT, "MATERIAL DESCRIPTION
EKKO, "PURCHASING DOCUMENT HEADER
EKPO, "PURCHASING DOCUMENT ITEM
VBAK, "SALES DOCUMENT HEADER DATA
VBAP. "SALES DOCUMENT ITEM DATA
TYPE-POOLS : SLIS.
DATA: VT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
V_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
V_LAYOUT TYPE SLIS_LAYOUT_ALV,
BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, "MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH, "INDUSTRY SECTOR
MEINS LIKE MARA-MEINS, "BASE UNIT OF MEASURE
MATKL LIKE MARA-MATKL, "MATERIAL GROUP
END OF I_MARA,
BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR, "MATERIAL NUMBER
WERKS LIKE MARC-WERKS, "PLANT
LVORM LIKE MARC-LVORM, "FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
DISPO LIKE MARC-DISPO, "MRP CONTROLLER
END OF I_MARC,
BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR, "MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX, "MATERIAL DESCRIPTION
SPRAS LIKE MAKT-SPRAS, "LANGUAGE KEY
END OF I_MAKT,
BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR, "MATERIAL NUMBER
VKORG LIKE MVKE-VKORG, "SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG, "DISTRIBUTION CHANNEL
END OF I_MVKE,
BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR, "MATERIAL NUMBER
LGORT LIKE MARD-LGORT, "STORAGE LOCATION
LABST LIKE MARD-LABST, "VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD,
BEGIN OF I_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN, "PURCHASING DOCUMENT NUMBER
EBELP LIKE EKPO-EBELP, "ITEM NUMBER OF PURCHASING DOCUMENT
MATNR LIKE EKPO-MATNR, "MATERIAL NUMBER
END OF I_EKPO,
BEGIN OF I_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF I_VBAP,
BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
SPRAS LIKE MAKT-SPRAS,
MAKTX LIKE MAKT-MAKTX,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
END OF I_OUT,
BEGIN OF I_HEADING OCCURS 0,
TEXT1(20),
TEXT2(20),
TEXT3(20),
TEXT4(20),
TEXT5(20),
TEXT6(20),
TEXT7(20),
TEXT8(20),
TEXT9(20),
TEXT10(20),
TEXT11(40),
TEXT12(20),
TEXT13(20),
TEXT14(20),
TEXT15(20),
TEXT16(20),
TEXT17(20),
END OF I_HEADING.
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR. "OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS. "OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO,
S_EBELN FOR EKPO-EBELN .
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS : RB1 RADIOBUTTON GROUP G1,
RB2 RADIOBUTTON GROUP G1,
RB3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
PERFORM PURCHASEDATA_VALIDATION.
PERFORM SALESDATA_VALIDATION.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS MATKL FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS,
MARA-MATKL TO I_OUT-MATKL.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX SPRAS FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX,
MAKT-SPRAS TO I_OUT-SPRAS.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_EKPO WHERE MATNR = I_MARC-MATNR.
MOVE: I_EKPO-EBELN TO I_OUT-EBELN,
I_EKPO-EBELP TO I_OUT-EBELP.
ENDLOOP.
LOOP AT I_VBAP WHERE MATNR = I_MARC-MATNR.
MOVE: I_VBAP-VBELN TO I_OUT-VBELN,
I_VBAP-POSNR TO I_OUT-POSNR.
ENDLOOP.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
PERFORM OPTIONS.
FORM OPTIONS *
FORM OPTIONS.
IF RB2 = 'X'.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ELSE.
IF RB1 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
ELSE.
IF RB3 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "OPTIONS
FORM HEADINGS *
FORM HEADINGS.
I_HEADING-TEXT1 = 'MATNR'.
I_HEADING-TEXT2 = 'WERKS'.
I_HEADING-TEXT3 = 'LVORM'.
I_HEADING-TEXT4 = 'DISPO'.
I_HEADING-TEXT5 = 'MBRSH'.
I_HEADING-TEXT6 = 'MEINS'.
I_HEADING-TEXT7 = 'MATKL'.
I_HEADING-TEXT8 = 'VKORG'.
I_HEADING-TEXT9 = 'VTWEG'.
I_HEADING-TEXT10 = 'SPRAS'.
I_HEADING-TEXT11 = 'MAKTX'.
I_HEADING-TEXT12 = 'LGORT'.
I_HEADING-TEXT13 = 'LABST'.
I_HEADING-TEXT14 = 'EBELN'.
I_HEADING-TEXT15 = 'EBELP'.
I_HEADING-TEXT16 = 'VBELN'.
I_HEADING-TEXT17 = 'POSNR'.
APPEND I_HEADING.
ENDFORM. "HEADINGS
FORM DLOAD *
FORM DLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_HEADING
EXCEPTIONS
FILE_WRITE_ERROR = 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_OUT.
ENDFORM. "DLOAD
FORM FIELDCAT *
FORM FIELDCAT.
V_FIELDCAT-COL_POS = '1'.
V_FIELDCAT-FIELDNAME = 'MATNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'MATNR'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '2'.
V_FIELDCAT-FIELDNAME = 'WERKS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'WERKS'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '3'.
V_FIELDCAT-FIELDNAME = 'LVORM'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LVORM'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '4'.
V_FIELDCAT-FIELDNAME = 'DISPO'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'DISPO'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '5'.
V_FIELDCAT-FIELDNAME = 'MBRSH'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MBRSH'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '6'.
V_FIELDCAT-FIELDNAME = 'MEINS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MEINS'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '7'.
V_FIELDCAT-FIELDNAME = 'MATKL'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MATKL'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '8'.
V_FIELDCAT-FIELDNAME = 'VKORG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VKORG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '9'.
V_FIELDCAT-FIELDNAME = 'VTWEG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VTWEG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '10'.
V_FIELDCAT-FIELDNAME = 'SPRAS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'SPRAS'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '11'.
V_FIELDCAT-FIELDNAME = 'MAKTX'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MAKTX'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '12'.
V_FIELDCAT-FIELDNAME = 'LGORT'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LGORT'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-SELTEXT_L = 'STRG LOCT'.
V_FIELDCAT-OUTPUTLEN = 10.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '13'.
V_FIELDCAT-FIELDNAME = 'LABST'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-SELTEXT_M = 'STOCK'.
V_FIELDCAT-OUTPUTLEN = 15.
V_FIELDCAT-REF_FIELDNAME = 'LABST'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-DO_SUM = 'X'.
V_LAYOUT-TOTALS_TEXT = 'TOTAL STOCK:'.
V_FIELDCAT-HOTSPOT = 'X'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '14'.
V_FIELDCAT-FIELDNAME = 'EBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'EBELN'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '15'.
V_FIELDCAT-FIELDNAME = 'EBELP'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'EBELP'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '16'.
V_FIELDCAT-FIELDNAME = 'VBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'VBELN'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '17'.
V_FIELDCAT-FIELDNAME = 'POSNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'POSNR'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
ENDFORM. "FIELDCAT
FORM OUTPUT *
FORM OUTPUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = 'CLICK ON MATERIAL/PURDOC/SALESDOC FOR DETAILS'
I_CALLBACK_USER_COMMAND = 'DISPLAYDETAILS'
IS_LAYOUT = V_LAYOUT
IT_FIELDCAT = VT_FIELDCAT1
TABLES
T_OUTTAB = I_OUT.
IF SY-SUBRC 0.
ENDIF.
ENDFORM. "OUTPUT
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'REPORT FOR : '.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'MATERIAL DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'PURCHASE ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'SALES ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'GEAR'
IT_LIST_COMMENTARY = T_HEADER.
ENDFORM. "TOP-OF-PAGE
*& FORM PURCHASEDATA_VALIDATION *
FORM PURCHASEDATA_VALIDATION.
SELECT EBELN EBELP MATNR
FROM EKPO
INTO TABLE I_EKPO
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND EBELN IN S_EBELN
AND WERKS EQ P_WERKS.
IF I_EKPO[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA IS SELECTED FROM TABLE EKPO'.
EXIT.
ENDIF.
DATA: T_EKPO LIKE I_EKPO OCCURS 0 WITH HEADER LINE.
T_EKPO] = I_EKPO[.
REFRESH I_EKPO.
FREE I_EKPO.
LOOP AT T_EKPO.
SELECT SINGLE EBELN FROM EKKO INTO EKPO-EBELN
WHERE EBELN = T_EKPO-EBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_EKPO TO I_EKPO.
APPEND I_EKPO.
CLEAR I_EKPO.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_EKPO.
ENDFORM. "PURCHASEDATA_VALIDATION
*& FORM SALESDATA_VALIDATION *
FORM SALESDATA_VALIDATION.
SELECT VBELN POSNR MATNR
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE
I_VBAP FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
DATA: T_VBAP LIKE I_VBAP OCCURS 0 WITH HEADER LINE.
T_VBAP] = I_VBAP[.
REFRESH I_VBAP.
FREE I_VBAP.
LOOP AT T_VBAP.
SELECT SINGLE VBELN FROM VBAK INTO VBAK-VBELN
WHERE VBELN = T_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_VBAP TO I_VBAP.
APPEND I_VBAP.
CLEAR I_VBAP.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_VBAP.
ENDFORM. "SALESDATA_VALIDATION -
Link labview data with excel sheets
I would like to save the output of a cluster(containing strings and numeric data) in a specific format(each data in respective columns)
in an excel sheet.
how do I do it in labview??
I tried mathscript, is there any other way? If there isnt can u suggest how can I use it to solve the above mentioned issue.
similarly, can I recieve data in real time from excel sheets??
pls suggest.
Solved!
Go to Solution.I think you should use the ActiveX to fullfill your requirements.
You can refer to this example
<LabVIEW Folder>\examples\comm\ExcelExamples.llb\Excel Macro Example.vi
Use activeX to write and read data.
Best Regards
Hu Yu -
Problem with Changing Data while Import through Excel Sheet
Hi Experts,
I am new to SAP LUMIRA and I am facing an issue with it. Actually, I am importing the data for analysis from an Excel sheet into SAP LUMIRA. I am able to prepare the visualization in the first go. But If I am changing the number of columns in the excel sheet afterwards (that may occur in normal circumstances where data is dynamic) and then refreshing the LUMIRA dashboard, it fails. Please can you tell me about a possible mistake or is it really feasible when we change data afterwards and then refresh the dashboards once again.
Looking forward to your answers.
Regards,
AmanWhat is the error message?
Can you confirm you are using 1.15.1? -
Formatting / Post Processing of Exported Excel Sheet
Hi ,
Issue:
The Columns in the Excel Sheet are not fully visible when we export Report from CR viewer to Excel Sheet. So we had planned for Post processing of the Excel Sheet using VBA or .NET etc to format the Excel Sheet, which would be on the server side, meaning the End user will never see the formatting process, but only the End Report. Is it possible to achieve this ??
NOTE:
1) VBA or .NET could not be run on the Linux Server but we could take advantage of the windows server in the presentation layer.
Architecture:
Presentation Layer
Linux Server <--> Windows .Net Server <--
> End User
{Crystal RAS Server} <-->{GUI CR Viewer Application}<--
>
Our Proposed Solution:
1) Create an GUI Application that has CR viewer in it .
2) Create a Separate Excel Export button on the webpage.
3) when the user wants to export the report , he clicks the button.
4) The GUI/ application saves the Exported Excel Sheet from the Ras server to the windows server.
5) Then the .Net or the Vba code is applied to process/Format the Excel Sheet.
6) When complete the End user is prompted for saving the report to a local disk.
My questions:
1) Can this be achieved ?
2) what would be the best way to handle this ?
3) what should be the process flow ?
4) what are the things to be considered while planning for such a design ?
Regards,
Ramkumar GovindasamySo you're looking at using RAS .NET SDK on the Application Layer to export a Crystal Report to Excel, save to temp file on the Application Layer machine, process that temp file, and stream that back out to the client web browser.
Considerations:
1. You need to create your own custom UI button to trigger the process, since the .NET Web Forms Crystal Reports viewer won't have the hooks to customize the Excel export.
2. Running Excel VBA from your Web App may be problematic - you'd have to be particularly careful if the system is under load, since the Excel VBA - COM-Interop isn't necessarily designed for high throughput. Under high load, you may get file locking or COM-Interop layer just refuse to process. It's pretty common to try and catch exceptions and retry if you encounter this.
You'd likely not find anyone here familiar with 2 above, but 1 is fairly common.
Sincerely,
Ted Ueda
Maybe you are looking for
-
How to display current navigation on "Body only" page layout
I create a new page and applied "Body only" page layout which is basically PageFromDocLayout.aspx But it doesn't show current navigation. How do I show current navigation on left side of the page? I have the code which will display current navigation
-
ID CS6 crash on book export pdf
ID6 crashes on exporting PDF of a book no matter what preset, get stucked in random places, in different books, but always the same place in the same doc, this happen to me with every book i've tried to export (selecting all the files in the book pal
-
Import FT Wizard - where's the imported site?
I downloaded the Import Front Page Site Wizard for Dreamweaver MX 2004 and then walked through the wizard to import my FP site. When I restart DW8, I get a message that the FP site has been added, but I don't see it anywhere. What gives?
-
Hi, I'm using english as the main system language, but I'd like to create iWeb pages in german. There is some text I can't change or at least have them changed overtime I create a new site. Those are e.g. "subscribe", "Play Slideshow" etc. How can I
-
I'm debugging a mapping and I have problem : parent constraint not found, it's strange because I defined other tables the same and it's ok. but this table have a Date format, so I think this is the problem. I know that Oracle format is dd-mon-yy, and