Combine and simplify SELECT and UPDATE sql query

foreach (BidList t in bidList)
query = "SELECT operator_id, plot_id, status FROM booking " +
"WHERE status='open' AND postcode='" + _plot + "' AND operator_id='0'" +
"ORDER BY datetime ASC;" +
"UPDATE booking SET operator_id='" + t.OperatorId + "', status='allocated' " +
"WHERE (plot_id=" + t.PlotId + " AND operator_id='0' AND status='open') LIMIT 1;";
dbObject.InsertBooking(query);
I am cleaning up my code, and came across the above SQL query. Before I make use of SQL parameters, I wanted to ask if it is possible to combine them, and if so, how?

Consider making a single long query using ‘;’ as a separator:
    query = "";
    foreach (BidList t in bidList)
        query += "UPDATE . . . ; ";
    dbObject.InsertBooking(query);
Use StringBuilder for more improvements.

Similar Messages

ERROR: Updatable SQL Query already exists on page 20.

Hello,
I created a tabular form, then added a where clause and started getting the following error:
Error in mru internal routine: ORA-20001: no data found in tabular form
So I deleted all components of the tabular form (region, buttons, branches and process) and started building it again from scratch. This is a strategy that has worked for me a number of times in HTML DB. Unfortunately now I get the following error when trying to build a new tabular form:
Updatable SQL Query already exists on page 20.You can only add one updatable SQL query per page. Select a different page.
What is the logic that throws this error. I'm 99% convinced I've cleared the page of any updatable SQL, is there something on the application level I should also clear out?
Thanks!

Ignore this, problem solved. It seems I do have SQL reports that are marked as updatable even though they are just plain reports.
Sorry.

UPDATE SQL query using WHERE and a date/time data type... Multiple changes...

I'm using the LabView Database Connectivity Toolset and am using the following query...
UPDATE IndexStation
SET Signal_Size=200
WHERE 'StartTime=12:05:23'
Now the problem is that this command seems to update all rows in the table IndexStation... Not just specifically the row where StartTime=12:05:23
I have tries all sorts of {} [] / ' " around certain characters and column names but it always seems to update all rows...
I've begun to use the SQL query tab in Access to try and narrow down as to why this happens, but no luck!
Any ideas!?
Thanks,
Chris.

Chris Walter wrote:
I completely agree about the Microsoft issue.
But it seems no SQL based manual states that { } will provide a Date/Time constant.
Is this an NI only implementation? Because I can't seem to get it to function correctly within LabView or in any SQL query.
Chris.
There is nothing about the database toolkit in terms of SQL syntax that would be NI specific. The database Toolkit simply interfaces to MS ADO/DAO and the actual SQL syntax is usually implemented in the database driver or database itself although I wouldn't be surprised if ADO/DAO does at times munch a bit with that too.
The Database Toolkit definitely does not. So this might be a documentation error indeed. My understanding of SQL syntax is in fact rather limited so not sure which databases might use what delimiters to format date/time values. I know that SQL Server is rather tricky thanks to MS catering for the local date/time format in all their tools and the so called universal date/time format has borked on me on several occasions.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Lookup creation and using this lookup in SQL query

I Have two tables one table called T_KEY_VALUES (KEY_ID , VALUE) and other is my transition table T_TRANSACTIONS (VERSION_ID , COL_VENDOR , COL_PREFIX, COL_RECIPTID , COL_STATE , COL_COUNTRY ..)
The data looks like below:
T_KEY_VALUES:
KEY_ID , VALUE,
10, CA
11, NY
13, NJ
20, USA
21, CANADA
101 , AMC
102, REGAL
1001, MOVIES
1002, MALLS
T_TRANSACTIONS:
VERSION_ID , COL_VENDOR , COL_PREFIX , COL_RECIPTID , COL_SATE , COL_COUNTRY
1, 101 , 1001 , 100001 , 10 , 20
2, 102 , 1002 , 100002 , 11 ,20
Generally, COL_VENDOR, COL_PREFIX , COL_STATE , COL_COUTRY field values exist in the T_KEY_VALUES table.
So How can I use T_KEY_VALUES as Lookup and write the one SQL query to get the data like below:
1, AMC , MOVIES , 100001 , CA ,USA
2, REGAL , MALLS , 100002 , NY , USA

Hi,
One way is to join t_transactions to 4 copies of t_key_values:
SELECT t.version_id
,       v.value           AS vendor
,       p.value           AS prefix
,       t.col_reciptid
,       s.value           AS state
,       c.value           AS country
FROM    t_transactions t
JOIN    t_key_values    v ON v.key_id = t.col_vendor
JOIN    t_key_values    p ON p.key_id = t.col_prefix
JOIN    t_key_values    s ON s.key_id = t.col_state     -- or col_sate
JOIN    t_key_values    c ON c.key_id = t.col_country
If you'd care to post CREATE TABLE and INSERT statements for the sample data, then I could test this.
The query above assumes all 4 coded columns in t_transactions have matching values in t_key_values, as they do in the sample data. If that assumption is wrong, then use outer joins in some (or all) of the places where I used inner joins above.
Another approach is to UNPIVOT t_transactions into 4 times as many rows, do a single join to t_key_values, and then PIVOT those results back to the original number of rows.

XSU and CURSOR expression in the sql query

Platform: oracle 8.X on ibm aix and java client code from
windows NT.
JDBC DRIVER: JDBC Oracle thin driver version 1.2.
when i execute a Sql satement with Cursor expression from the
java client code with XSU it returns an XML DOM But if the
CURSOR EXPRESSION IN THE SQL QUERY RETURNS EMPTY ROWS i get
back an error node with "ORA-01001 Invalid Cursor" error
message.i had aslo set the setNullAttributes(true) property
on oraclexmlquery.
Interestingly, if i exceute the same query in the SQL plus
it returns the column names with no rows.
is there any way where i can get xml document with table
structure, when there are no rows instead of ORA error message.

Ok.
I assume that you have for one activity several asset PNR and for one asset several activity.
The factPNR is on this way a real bridge table. It's a way to be able to design a many-to-many relationship.
Have a look here for more detail on how to build a many-to-many relationship :
http://gerardnico.com/wiki/dw/data_quality/relationships#many-to-many
Therefore I assume that you want this design :
DimActivity -< FactActivity >- < FactPNR >- DimPNR and you will have :
DimActivity -< FactActivity >- < BridgeTable >- DimPNR How to build your bridge table ?
In the physical layer, :
* create a new table BridgeActivityPNR, open it and select "statement"
* enter your sql statement
SELECT DISTINCT A.ROW_WID ACTIVIDAD_WID, B.ROW_WID ASSET_WID
FROM W_ACTIVITY_F A,
W_ASSET_D B,
W_SRVREQ_D C,
X_S_CMPT_MTRC_F D,
X_S_ASSET_FEA_D E
WHERE A.X_SRA_SR_ID=C.INTEGRATION_ID AND
C.X_VLG_FLIGHT_ID=D.X_ROW_ID AND
D.X_ROW_ID=E.X_CM_ID AND
E.X_ASSET_ID=B.X_ROW_ID* add two columns in the column tab : ACTIVIDAD_WID and ASSET_WID
* create the physical join with the table FactActivity and DimPNR
* drag and drop in the business model your table BridgeActivityPNR
* in the BMM, create the complex join like this :
DimActivity -< FactActivity >- < BridgeTable >- DimPNR * open your logical bridge table and check the bridge table option.
And you are done if I didn't forget anything.
A complete example here :
http://gerardnico.com/wiki/dat/obiee/obiee_bridge_table

How to pull Roles and Policies from backend using SQL query in OIA

Hello,
I have Roles and Policies defined in OIA with mapping each other and there is no direct extract report from OIA Web console.
Is there any oracle SQL query by which we can get the data and filter the Policies based on the role ?
Note: We have one Role having more than one Polcies defined in OIA.
Appreciate your help.
Thanks

I am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta

Photoshop Elements select tool, when targeting layer or multiple layers the layer properties box pops up. Having to very carefully and repeatedly select and highlight layers to move, or merge when using Move Tool. Win 8, Adobe 12, Intuos 4 w/ updated dr

This issue has been going on for several weeks.
The Move Tool is not functioning properly when selecting and TARGETING a layer or multiple layers, as the Layer Properties box pops up requiring me to close it and try again.
How to reset or is there an update and fix for this issue.
Using Win 8, Elements 12, and Intuos 4 Pen and Tablet.

To reset the tool I suggest click on it once and then look for something like this in the bottom half of your window:
In the above picture I have marked one section in red box. You need to click on it to get the option to either reset the only tool you have clicked or to reset all the tools in the editor window. Of course you have to be in Expert Mode to get this to work.
Good luck.

SEQUENCE Select within an SQL Query with an ORDER BY statement

Does anyone know why you cannot use an ORDER BY statement within an SQL query when also selecting from a SEQUENCE? My query was selecting production data as a result of a filtered search. I want to take the results of the filtered search and create a transaction. I have a sequence for generating transaction numbers where I select NEXTVAL. Since I could possibly obtain multiple, yet distinct, rows based upon my search criteria, I wanted to use an ORDER BY statement to simplify and order the resulting row(s).
I was able to get the SQL select with SEQUENCE.NEXTVAL to work without the ORDER BY, so I know that my SQL is correct. Thanks in-advance.

Okay,
I understand. You want the sequence assigned first and the you want to ORDER BY. You
can do this using pipelined functions. See here:
CREATE OR REPLACE TYPE emp_rec_seq AS OBJECT (
   seq     NUMBER,
   ename   VARCHAR2 (20),
   job     VARCHAR2 (20),
   sal     NUMBER
CREATE OR REPLACE TYPE emp_tab_seq AS TABLE OF emp_rec_seq;
CREATE OR REPLACE FUNCTION get_emp_with_sequence
   RETURN emp_tab_seq PIPELINED
IS
   my_record   emp_rec_seq := emp_rec_seq (NULL, NULL, NULL, NULL);
BEGIN
   FOR c IN (SELECT dummy.NEXTVAL seq, ename, job, sal
               FROM emp)
   LOOP
      my_record.seq := c.seq;
      my_record.ename := c.ename;
      my_record.job := c.job;
      my_record.sal := c.sal;
      PIPE ROW (my_record);
   END LOOP;
   RETURN;
END get_emp_with_sequence;after that, you can do a select like this:
SELECT seq, ename, job, sal
FROM TABLE (get_emp_with_sequence)
order by enamewhich will get you this:
       SEQ ENAME                JOB                         SAL
      1053 BLAKE                MANAGER                    2850
      1054 CLARK                MANAGER                    2450
      1057 FORD                 ANALYST                    3000
      1062 JAMES                CLERK                       950
      1055 JONES                MANAGER                    2975
      1052 KING                 MANAGER                   20000
      1060 MARTIN               SALESMAN                   1250
      1063 MILLER               CLERK                      1300
      1064 DKUBICEK             MANAGER                   12000
      1056 SCOTT                ANALYST                    3000
      1058 SMITH                CLERK                       800
      1061 TURNER               SALESMAN                   1500
      1059 WARD                 SALESMAN                   1250Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Setting current values in Multiple Select List in SQL Query based Report

Hi,
I have a report based on a sql query that contains a multiple select list. Unfortunately I cannot get the multiple select list to display the current values (p_value) correctly. I have created a page item, :p311_current_versions, that is set using a pre-header process and it returns a value with a colon delimited format e.g. '10.1.2.1.0:10.1.2.2.0'. Then this item is used in the sql query to set the current value (p_value) of the apex_item.select_list_from_query function. However when the table is displayed, instead of having two entries, 10.1.2.1.0 and 10.1.2.2.0 selected, it has an extra entry '10.1.2.1.0:10.1.2.2.0' selected.
Here is my code:
select distinct a.product, a.version from (
select distinct
apex_item.display_and_save(2,product)||apex_item.hidden(1,env_product_id) PRODUCT,
APEX_ITEM.SELECT_LIST_FROM_QUERY(3,decode(product, 'HTTP Server' , :p311_current_versions, version), 'SELECT distinct version d, version r FROM ebs_tech_stack where
product ='''||PRODUCT||'''',
decode(PRODUCT, 'HTTP Server' ,'multiple="multiple" style="width:170px"','style="width:170px"'),
'NO') as version
from ebs_environment_tech_stack
where environment_id = :p311_umgebung_id) a order by a.product
If anyone can help me figure out how to set the current values correctly I'd be really grateful!!
Thanks in advance,
Jean

Jean,
I don't think this is possible using the apex_item package. The select_list_from_query function accepts only a single value for the second parameter.
Scott

Using Multi Select List in SQL Query

Hi all,
I am trying to using a Multi Select list for filtering of a report. I have :P2_RISK_SEVERITY which has has the possibility of values Very Low:Low:Medium:High:Very High. How do I use this Multi Select in the where section of a SQL query?
I need to say something along the lines of:
Select RISK_SEVERITY from TBL_RMD_RISKS where RISK_SEVERITY = (one of the options selected in the multi select)
Thanks for the help.

Hi there,
The above suggestion will work perfectly as long as the table you're querying is relatively small, but keep in mind that applying the INSTR to the left side of the WHERE clause will always result in a full table scan. This means that if your table is large and RISK_SEVERITY is indexed, the index will never be used. Here is another approach (credit to AskTom) that converts your colon-delimited string of selected values to a list that can be used in an "IN(...)" clause, which will use an index on RISK_SEVERITY as long as the optimizer otherwise deems it appropriate:
-- creates a type to hold a list of varchars
CREATE OR REPLACE TYPE vc2_list_type as table of varchar2(4000);
-- converts a colon-delimited string of values to a list of varchars
CREATE OR REPLACE FUNCTION vc2_list(p_string in varchar2)
   return vc2_list_type is
   l_string       long default p_string || ':';
   l_data         vc2_list_type := vc2_list_type();
   n              pls_integer;
begin
   loop
      exit when l_string is null;
      n := instr(l_string, ':');
      l_data.extend;
      l_data(l_data.count) := ltrim(rtrim(substr(l_string, 1, n - 1)));
      l_string := substr(l_string, n + 1);
   end loop;
   return l_data;
end vc2_list;
-- your WHERE clause
where risk_severity in(
         select *
           from the(select cast(vc2_list(:P2_RISK_SEVERITY) as vc2_list_type)
                      from dual))
...Hope this helps,
John

How to processing the results from the select statement in SQL query?

Hi
This might be too simple, but my knowledge of the SQL is very limited...
I have table where I do have details from calls (Lync QoE).
I can take all calls from the table, but I would like to count the concurrent calls on the table. This is how I got it work on the Excel to work (but I would like to do that on the SQL statement to get it more dynamic use):
Table have these line and this is what I get out from the Select):
[callid],[start],[end]
1ABC,1.1.2014 01:00:15, 1.1.2014 01:01:00
5DEF,1.1.2014 01:00:45, 1.1.2014 01:05:00
FDE2,1.1.2014 01:03:15, 1.1.2014 01:04:00
KDJ8,1.1.2014 01:04:15, 1.1.2014 01:06:00
FDJ8,2.1.2014 01:04:15, 2.1.2014 01:06:00
KDSE,3.1.2014 01:04:15, 3.1.2014 01:06:00
The information I would like to get, is what is the maximum amount of the concurrent calls per day.
On the excel I basically count line by line how many concurrent calls each line have had, and then pickup the highest one. On above example the calls 5DEF, FDE2 and FDE2 have been active at the same time which gives 3 for the first day.
The table is ordered by the start. So let say the code is on the third line (FDE2). I need to count calls from before which end time is after the start time (of FDE2), but also I need to count calls after (FDE2) which are started before the current
call has ended.
Petri

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Urgent= How to Group selected columns in sql query

Hi,
I need some urgent help on the following sql query. I 'm sure there is an easy way to do this but I'm stacked!Any help will be much appreciated!!
I have a query to retrieve the following columns:
I want the first 9 columns to be grouped together (not to be repeated) for any occurence of the last 3 columns (abs.ABSENCE_START_DATE,abs.ABSENCE_END_DATE, abs.DAYS_TAKEN DAYS_TAKEN_analysis)
SELECT DISTINCT
sum.employee_number ,
sum.EMPLOYEE_NAME,
sum.EMAIL_ADDRESS,
sum.ORGANIZATION ,
sum.BCEBF ,
sum.ALDE ,
sum.CURYRREMDAYS ,
sum.DAYS_TAKEN ,
sum.REMBCE ,
abs.ABSENCE_START_DATE
abs.ABSENCE_END_DATE,
abs.DAYS_TAKEN DAYS_TAKEN_analysis
--TO_CHAR(TO_CHAR(abs.ABSENCE_START_DATE)||' '||TO_CHAR(abs.ABSENCE_END_DATE)||' '||TO_CHAR(abs.DAYS_TAKEN)) DAYS_TAKEN_ANAL
FROM
HB_V_ANNUAL_LEAVE_SUMMARY_REP SUM,
HB_V_AN_LEAV_DAYS_TAKEN_REP ABS
WHERE
sum.employee_number = abs.EMPLOYEE_NUMBER
ORDER BY
sum.employee_number ,
sum.EMPLOYEE_NAME,
sum.EMAIL_ADDRESS,
sum.ORGANIZATION ,
sum.BCEBF ,
sum.ALDE ,
sum.CURYRREMDAYS ,
sum.DAYS_TAKEN ,
sum.REMBCE
Any feedback/help on how to do this will be highly appreciated.
Thanks a lot
Elena

Please help!!
I used the break command to group columns that I do not want to repeat in my query output. When I run the query without formatting is working. But when I put all formatting to produce the required output I dont get the result I want.
Below is the exact sql query I use:
<<
SET TERMOUT OFF
SET ECHO OFF
SET ARRAY 35
SET HEA OFF
SET FEEDBACK OFF
SET PAGES 2000
col beginLINE format A100
col winsecidLINE format A100
col placeLINE format A100
COL LINEempty1 format A100
COL LINEempty2 format A100
COL LINEempty3 format A100
COL LINEempty4 format A100
COL LINEempty5 format A100
COL LINEempty6 format A100
COL LINEempty7 format A100
COL LINEempty8 format A100
COL LINEempty9 format A100
COL LINEempty10 format A100
col LINECOLempty format A100
col receiverLINE FORMAT A100
COL EMP_EMAIL_ADDRESS FORMAT A100
COL LINEHEADER FORMAT A100
COL unitsLINE FORMAT A100
COL lmLINE FORMAT A100
COL INTITLE FORMAT A100
COL LINECOL1 FORMAT A100
COL CIF FORMAT A100
COL EMPLOYEE_NAME FORMAT A100
COL ORGANIZATION FORMAT A100
COL LINECOL2 FORMAT A100
COL ALHEADER FORMAT A100
col LINECOL3 FORMAT A100
col BCEBF FORMAT A100
col ALDE FORMAT A100
COL CURYRREMDAYS FORMAT A100
COL DAYS_TAKEN FORMAT A100
col LINECOL4 FORMAT A100
COL REMBCE FORMAT A100
col LINECOL5 FORMAT A100
col LINECOL6 FORMAT A100
col ALHEADER2 FORMAT A100
col LINECOL7 FORMAT A100
col endLINE FORMAT A100
break on beginLINE on winsecidLINE on placeLINE on LINEempty1 ON LINEempty2 ON LINEempty3 ON LINEempty4 ON LINEempty5 ON LINEempty6 ON LINEempty7 ON LINEempty8 ON LINEempty9 ON LINEempty10 on receiverLINE on EMP_EMAIL_ADDRESS on LINEHEADER on unitsLINE on lmLINE on INTITLE on LINECOL1 on CIF on EMPLOYEE_NAME on ORGANIZATION on LINECOL2 on ALHEADER on LINECOL3 on BCEBF on ALDE on CURYRREMDAYS on DAYS_TAKEN on LINECOL4 on REMBCE on LINECOL5 on LINECOL6 on ALHEADER2 on LINECOL7 ON LINEempty11 ON endREPORT on endLINE
SPOOL C:\FORMATout.txt
SELECT
'{{begin}} '||chr(10) beginLINE,
'{{winsecid 999999}} '||chr(10) winsecidLINE,
'{{place rbsemail.tif 0 0}} '||chr(10) placeLINE,
' '||chr(10) LINEempty1,
' '||chr(10) LINEempty2,
' '||chr(10) LINEempty3,
' '||chr(10) LINEempty4,
' '||chr(10) LINEempty5,
' '||chr(10) LINEempty6,
' '||chr(10) LINEempty7,
' '||chr(10) LINEempty8,
' '||chr(10) LINEempty9,
' '||chr(10) LINEempty10,
'{{from [email protected]}} '||chr(10) receiverLINE,
'{{fax '|| EMAIL_ADDRESS||' }} '||chr(10) EMP_EMAIL_ADDRESS,
'{{Subject Annual Leave Summary Report as at '||sysdate||' }} '||chr(10) LINEHEADER,
'{{units cm}} '||chr(10) unitsLINE,
'{{lm 2.0}} '||chr(10) lmLINE,
'ANNUAL LEAVE SUMMARY REPORT AS AT '||sysdate INTITLE,
'---------------------------------------------------------------------' LINECOL1,
'CIF: '||CIF CIF,
'EMPLOYEE NAME: '||EMPLOYEE_NAME EMPLOYEE_NAME,
'DEPARTMENT DETAILS: '||ORGANIZATION ORGANIZATION,
'---------------------------------------------------------------------' LINECOL2,
'ANNUAL LEAVE DETAILS:' ALHEADER,
'---------------------------------------------------------------------' LINECOL3,
'BALANCE B/F FROM PREVIOUS YEAR: '||BCEBF BCEBF,
'DAYS ENTITLED FOR THE CURRENT YEAR: '||ALDE ALDE,
'CURRENT YEAR REMAINING DAYS: '||CURYRREMDAYS CURYRREMDAYS,
'DAYS TAKEN FOR THE CURRENT YEAR: '||DAYS_TAKEN DAYS_TAKEN,
'---------------------------------------------------------------------' LINECOL4,
'REMAINING BALANCE: '||REMBCE REMBCE,
'---------------------------------------------------------------------' LINECOL5,
'---------------------------------------------------------------------' LINECOL6,
'ANNUAL LEAVE DAYS TAKEN ANALYSIS FOR THE CURRENT YEAR:' ALHEADER2,
'---------------------------------------------------------------------' LINECOL7,
TO_CHAR('START DATE: '||ABSENCE_START_DATE||' '||'END DATE: '||ABSENCE_END_DATE||' '||'DAYS TAKEN : '||DAYS_TAKEN_ANAL) AL_DAYS_ANAL,
' '||chr(10) LINEempty11,
'-- End of Report -- '||chr(10) endREPORT,
'{{end}} '||chr(10) endLINE
FROM HB_V_AN_LEAV_SUM_DAYSTAKEN_REP
WHERE CIF IN ('098033','098024')
ORDER BY
beginLINE ,
winsecidLINE,
placeLINE ,
LINEempty1,
LINEempty2,
LINEempty3,
LINEempty4,
LINEempty5,
LINEempty6,
LINEempty7,
LINEempty8,
LINEempty9,
LINEempty10,
receiverLINE,
EMP_EMAIL_ADDRESS,
LINEHEADER ,
unitsLINE ,
lmLINE ,
INTITLE ,
LINECOL1,
CIF ,
EMPLOYEE_NAME ,
ORGANIZATION ,
LINECOL2 ,
ALHEADER ,
LINECOL3,
BCEBF ,
ALDE ,
CURYRREMDAYS ,
DAYS_TAKEN ,
LINECOL4 ,
REMBCE ,
LINECOL5 ,
LINECOL6 ,
ALHEADER2 ,
LINECOL7 ,
LINEempty11,
endREPORT,
endLINE
spool off
>>
The required output I want to get is:
<<
{{begin}}
{{winsecid 750612}}
{{place rbsemail.tif 0 0}}
{{from [email protected]}}
{{fax [email protected] }}
{{Subject Annual Leave Summary Report as at 04-APR-08 }}
{{units cm}}
{{lm 2.0}}
ANNUAL LEAVE SUMMARY REPORT AS AT 04-APR-08
CIF: 098024
EMPLOYEE NAME: Christou Christos Panteli
DEPARTMENT DETAILS: 003-031-010-314-03140-Special Projects
ANNUAL LEAVE DETAILS:
BALANCE B/F FROM PREVIOUS YEAR: 9
DAYS ENTITLED FOR THE CURRENT YEAR: 27
CURRENT YEAR REMAINING DAYS: 24
DAYS TAKEN FOR THE CURRENT YEAR: -3
REMAINING BALANCE: 33
ANNUAL LEAVE DAYS TAKEN ANALYSIS FOR THE CURRENT YEAR:
START DATE: 04-JAN-08 END DATE: 04-JAN-08 DAYS TAKEN : 1
START DATE: 24-JAN-08 END DATE: 24-JAN-08 DAYS TAKEN : 1
START DATE: 20-FEB-08 END DATE: 20-FEB-08 DAYS TAKEN : 1
-- End of Report --
{{end}}
{{begin}}
{{winsecid 750612}}
{{place rbsemail.tif 0 0}}
{{from [email protected]}}
{{fax [email protected]}}
{{Subject Annual Leave Summary Report as at 04-APR-08 }}
{{units cm}}
{{lm 2.0}}
ANNUAL LEAVE SUMMARY REPORT AS AT 04-APR-08
CIF: 098033
EMPLOYEE NAME: Demetriou Elena Steliou
DEPARTMENT DETAILS: 003-031-010-314-03140-Special Projects
ANNUAL LEAVE DETAILS:
BALANCE B/F FROM PREVIOUS YEAR: 15
DAYS ENTITLED FOR THE CURRENT YEAR: 27
CURRENT YEAR REMAINING DAYS: 25
DAYS TAKEN FOR THE CURRENT YEAR: -2
REMAINING BALANCE: 40
ANNUAL LEAVE DAYS TAKEN ANALYSIS FOR THE CURRENT YEAR:
START DATE: 15-JAN-08 END DATE: 15-JAN-08 DAYS TAKEN : 1
START DATE: 24-MAR-08 END DATE: 24-MAR-08 DAYS TAKEN : 1
-- End of Report --
{{end}}
>>
However the actual output we get from the above query is as follows:
<<
{{begin}}
{{winsecid 750612}}
{{place rbsemail.tif 0 0}}
{{from [email protected]}}
{{fax [email protected] }}
{{Subject Annual Leave Summary Report as at 04-APR-08 }}
{{units cm}}
{{lm 2.0}}
ANNUAL LEAVE SUMMARY REPORT AS AT 04-APR-08
CIF: 098024
EMPLOYEE NAME: Christou Christos Panteli
DEPARTMENT DETAILS: 003-031-010-314-03140-Special Projects
ANNUAL LEAVE DETAILS:
BALANCE B/F FROM PREVIOUS YEAR: 9
DAYS ENTITLED FOR THE CURRENT YEAR: 27
CURRENT YEAR REMAINING DAYS: 24
DAYS TAKEN FOR THE CURRENT YEAR: -3
REMAINING BALANCE: 33
ANNUAL LEAVE DAYS TAKEN ANALYSIS FOR THE CURRENT YEAR:
START DATE: 04-JAN-08 END DATE: 04-JAN-08 DAYS TAKEN : 1
-- End of Report --
{{end}}
START DATE: 24-JAN-08 END DATE: 24-JAN-08 DAYS TAKEN : 1
START DATE: 20-FEB-08 END DATE: 20-FEB-08 DAYS TAKEN : 1
{{fax [email protected] }}
{{Subject Annual Leave Summary Report as at 04-APR-08 }}
{{units cm}}
{{lm 2.0}}
ANNUAL LEAVE SUMMARY REPORT AS AT 04-APR-08
CIF: 098033
EMPLOYEE NAME: Demetriou Elena Steliou
DEPARTMENT DETAILS: 003-031-010-314-03140-Special Projects
ANNUAL LEAVE DETAILS:
BALANCE B/F FROM PREVIOUS YEAR: 15
DAYS ENTITLED FOR THE CURRENT YEAR: 27
CURRENT YEAR REMAINING DAYS: 25
DAYS TAKEN FOR THE CURRENT YEAR: -2
REMAINING BALANCE: 40
ANNUAL LEAVE DAYS TAKEN ANALYSIS FOR THE CURRENT YEAR:
START DATE: 15-JAN-08 END DATE: 15-JAN-08 DAYS TAKEN : 1
-- End of Report --
{{end}}
START DATE: 24-MAR-08 END DATE: 24-MAR-08 DAYS TAKEN : 1
>>
IF ANYONE CAN HELP ON THIS I WOULD REALLY APPRECIATE IT!
THANKS A LOT!
Best regards,
Elena

Not able to save / update SQL Query in Query manager

Hi,
I am using SBO 2005 B PL 25, facing unique problem in Query Manager.
There are various queries saved in Query manager, tried updating & creating / saving new query but not able to do so.
System displays messaged as operation completed successfully, but the query is not updated.
Kindly let me know is there any setting which blocks the updation.
Regards,
Yogesh Jadav
Edited by: YOGESH JADAV on Aug 11, 2008 3:07 PM

Hi
You cannot Modify or Update query in the 'System' Category.
If you are trying to create/ modify/ update query in some other category, check for the authorizations in
'Administration -> System Initialization -> Authorizations Window' -> Reports ->Query Generator'.
Check if you have authorizations for the following
New Queries
Create/Edit Categories
Saved Queries - Group No. 1
Saved Queries - Group No. 20

Help with update SQL query

Hi,I want to update the city_code with city_new_code but want to update the data before the first hyphen of city_code.
create table #city (city_code char(10), city_code char(2), city_new_code char(10))
insert into #city values ('1989_DEL_J1_200','2','2000')
insert into #city values ('1789_DEL_K1_300','2','3000')
insert into #city values ('1999_DEL_J1_400','2','5000')
update #city set city_code........
/* Need Required Output*/
city_code         city_code city_new_code
2000_DEL_J1_200 2              2000
3000_DEL_K1_300 2               3000
5000_DEL_J1_400 2              5000

create table #city (city_code varchar(15), city_code2 char(2), city_new_code varchar(4))
insert into #city values ('1989_DEL_J1_200','2','2000')
insert into #city values ('1789_DEL_K1_300','2','3000')
insert into #city values ('1999_DEL_J1_400','2','5000')
--update #city set city_code........
update #city
Set city_code=stuff(city_code,1,4,city_new_code)
Select city_code,city_code2,city_new_code from #city
drop table #city

JDBC SELECT FOR UPDATE

I'm trying to issue a SELECT ... FROM ... FOR UPDATE, and under specific verified conditions runs an UPDATE (where the current is positioned!).
The error code I get is:
ORA-01002: Fetch out of sequence.
Here you are my code:
/////////////////////START
import java.sql.*;
import oracle.jdbc.*;
import oracle.sql.*;
public class SelForUpdDin{
static{
     try{
          Class.forName("oracle.jdbc.driver.OracleDriver");
     catch(Exception e){e.printStackTrace();}
// Queries and cursor name
public static void main (java.lang.String[] args){
String cursorName = null;
int codice = 0;
String cognome = null;
String job = null;
int manager = 0;
java.sql.Date dataAss = null;
int salario = 0;
int commissioni = 0;
int reparto = 0;
String rowid = null;
String sqlSelect = "SELECT empno, ename, "+
"job, mgr, hiredate, sal, comm, deptno, ROWID "+
"FROM scott.emp FOR UPDATE";
String sqlUpdate = "UPDATE scott.emp SET comm = ? WHERE ROWID = ? ";
try {
Connection con = DriverManager.getConnection("jdbc:Oracle:oci8:@","system","manager");
// Esecuzione della SELECT e produzione del RESULT SET
Statement stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(sqlSelect);
PreparedStatement ps = con.prepareStatement(sqlUpdate);
while (rs.next()) {
codice = rs.getInt(1);
cognome = rs.getString(2);
job = rs.getString(3);
manager = rs.getInt(4);
dataAss = rs.getDate(5);
salario = rs.getInt(6);
commissioni = rs.getInt(7);
reparto = rs.getInt(8);
rowid = rs.getString(9);
// Applicazione della business logic
if (reparto == 30)
{ System.out.println (cognome + " in dept= "+ reparto +
" with salary=" + salario + " has a commission= " +
commissioni);
int newcomm = 5555;
ps.setInt(1,newcomm);
ps.setString(2,rowid);
ps.executeUpdate();
else
{ System.out.println (cognome + " in dept= "+ reparto +
" with salary=" + salario + " has a commission= " + commissioni);
} // if - else
} // end while
rs.close();
ps.close();
stmt.close();
catch(Exception e)
e.printStackTrace();
} // end main()
} // end class
//PS.
//Many thanks to Bachar and Elangovan that ansewerd me to my previous posting and addressed me towards the right solution

Hi
The documentation gives following explanation for the error :
ORA-01002 fetch out of sequence
Cause: In a host language program, a FETCH call was issued out of sequence. A successful parse-and-execute call must be issued before a fetch. This can occur if an attempt was made to FETCH from an active set after all records have been fetched. This may be caused by fetching from a SELECT FOR UPDATE cursor after a commit. A PL/SQL cursor loop implicitly does fetches and may also cause this error.
Action: Parse and execute a SQL statement before attempting to fetch the data.
In your program you should set auto commit to false as follows :
con.setAutoCommit(false);
Do this before executing the SELECT FOR UPDATE sql query.
At the end of program you can commit to save the updations as follows:
con.commit();
This should solve the problem.
Chandar

Combine and simplify SELECT and UPDATE sql query

Similar Messages

Maybe you are looking for