Combining LV Application and NIDAQ Installer on One CD

I have a commercial application that uses a DAQ card. For convenience, I am
including both the LabVIEW application installation program with NIDAQ on
the same CD (note that I have OK'd this with NI Legal and they do both fit
on the same CD). I have my application installer setup to autorun when the
CD is inserted but NIDAQ is in a sub-folder that the user has to manually
run to install NIDAQ.
Does anyone no how I can automatically start the NIDAQ installation after
the LV built application is done installing? If so, please explain details
and post example build file (.bld) if applicable.
Misc. notes: I am using NIDAQ 7.1 but only the traditional DAQ is used in
my application.

when in application builder if you create an installer and select the advanced button, you can run another installer using the run executable after installation option. All you need to do is put in the command line and command line arguments. This will install any installer after the executable has been installed. There are also options that can be used to run a silent install, etc. YOu can find these options for items such as a silent install you can go into the command prompt and go to a dir that has a setup.exe file. type in setup /h and this will show you the switches for that installer. Hope this helps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Similar Messages

What's the proper workflow to combine multiple video types and turn them into one high quality DVD?

I'm trying to combine 1080i (29.97fps), 1080p (29.97fps), and 720p (24fps) video files into a single Premiere Pro project, and end up with a high quality DVD.
There are a few problems I can't solve:
1. There seems to be interlacing and clarity issues any time I export it to DVD dimensions (720x480), and on some TVs I'll get a bouncing motion on the 720p footage (slideshow). Yet everything seems to look perfect when I export it something like an HD MOV file.
2. If I use Final Cut X to make the DVD, I'll get audio popping and decent image quality. Yet if I use Encore, I'll get horrible interlacing, but good audio.
I don't have any training in video workflow let alone how to properly diagnose and solve problems that arise. So I need someone to lay out the proper workflow and settings from start to finish to get these three different types of footage to look great on a DVD using Premiere/Encore.
I've attached sample images showing the types of footage I'm using and the kind of problems I'm running into for reference.

By far the best way to get the quality of encoding is to use Compressor and not DVDSP. You can set Compressor up to do the AC3 (which DVDSP can't do). Alternatively, use a better encoder than Compressor, such as BitVice or MegaPEG.X... but remember that these do not do AC3 encoding.
Keep the encoded assets all in a single folder on your mac, then drag that folder into the DVDSP 'Assets' tab. This will import them all and keep them in the folder, which is a neater way of doing things. Select all of the clips within the folder (or simply select the folder itself) and drag them on to the track - they will go on in alphabetic or numeric order (whichever you have used as your names). If using numbers, remember to use '01', '02', etc otherwise clip ten, eleven, twelve and so on will follow clip one... clip two will come after clip 19.
Drop them all on a single track. You can then point a menu button at the track and all of the clips will play one after the other. If you want black in between then you will be better adding this in a NLE such as Final Cut, then exporting the entire sequence of clips as a single file. Alternatively, create a black .pict file the correct dimensions for the video format you are using and manually add it in between each clip on the timeline. Or, create a series of black .pict files and name them 011, 021, 031 and so on. Place them in your folder of clips with the MPEGs named 01, 02 and so on. When you select all and drop it onto your timeline within DVDSP a black clip will go in between each piece of footage (sequence will be 01, 011, 02, 021, 03, 031 ). This is probably the quickest way to do it. You can reuse the same black .pict files for every project like this and as long as you follow the same naming convention it will always work.
Like anything you want to automate, the first couple of times take longer to set up. After that it is a lot easier.

How can i combine pages in potrait and layout orientations in one document in Pages '09?

Hi all,
I am a new user to iwork '09. Previously I had been using Microsoft office for Mac, but I recently downloaded iWork as i believe Apple designs hardware and software which has better performance.
So far i am happy with using pages'09, but recently I have gotten frustrated. I do many project documents which have narrative sections which are usually done in portrait orientaion, but these documents also have rather wide tables which are best presented in landscape orientation. I could switch page orientation in word, but in pages, I have not been able to do so. This alone makes working with pages rather difficult and not appropriate for quite a few of my proposals.
Would anyone be able to advise me on how I can make documents in pages which have some pages in portrait orientation and other in landscape orientations within the same document?
Please help!
Ayaz

Thank you so much for your response. I appreciate the time you have taken out to attend to my query.
The document I am working on is to be shared with a team for further inputs. Its frustrating how they can all mix page orientations as they use word and I cannot because i use pages. In essence I will also have the final input on some of these documents and then forward them to coleagues internationally, hence they must look presentable and easy to read.
Do you have any tips I could use? I could use word, but I love the look of my documents when done in pages, its a fantastic word processor, albeit this limitation.

Home Environment - How to set up Update Retriever (UR) and Thin Installer (TI) in a home environment

Serenityvalley wrote:
You need to go to This Page and download just about everything on it -espeically the System Update Deployment Guide and start reading. It'll take you a few hours to learn what you need to do and implement it if you are familar with editing system registeries and you have some luck and everything goes well.
You do NOT need to edit registry, just use Thin Installer instead of System Update on the clients. And there is no need to wade thru the deployment guide if you are setting this up in a home environment for just one or two clients.
Edit: Note that Thin Installer does not run on Vista SP2 (neither does System Update.)
Here are the few simple things you have to do:
1. Download Update Retriever (UR) and Thin Installer (TI) from here.
2. Install UR on one pc and TI on all clients you want to keep updated. UR installs into the Start -- All Programs -- Thinkvantage folder, TI installs into c:\program files\thininstaller.
3. To initialize Update Retriever:
a) specify the download folder, pick a place all clients can access. Create a new folder, TI will be confused if there is other stuff in it.
b) change the settings to Severity -- Optional (assuming you want to see critical, recommended and optional downloads in the list), License -- Do not display and Status -- Active. After clicking next you enter the machine type, the op system and its language for each client you need to keep updated. Note that unless you change status to active everything will download as "test" and thus not be installed by the Thin Installer.
4. Run the download, about 1 - 1.5GB for the first type, opsys and language combination and an additional 0.5 - 1GB for each additional type depending on amount of overlap. You can be selective what you download but if you are an average home user -- just download all the items for your type/opsys/language combination(s) -- Thin Installer is a stripped down version of System Update and will decide what to install on the individual client. This is a one-time download, next time you run Update Retriever it will just download new drivers.
5. To initialize TI on each client, copy the program from the Program Files directory and paste a shortcut to the desktop. Then rightclick on the shortcut and choose Properties, and in the target field of the shortcut tab after "C:\Program Files\ThinInstaller\ThinInstaller.exe" add the following: -repository your_UR_download_directory.
6. Run the Thin installer on each client, it will perform exactly as System Update did, down to making the same mistakes that System Update did.
7. As the date is getting close when Windows Update will start distributing Vista SP2 you may want to consider using Microsoft's SPBlockerTools preventing SP2 installation for up to 12 months.
8. Debugging Tips
TI ending with message An error occurred while gathering user information is reported when running under Vista SP2 -- TI will not run in SP2.
Getting TI to "see" the database downloaded by UR is the main problem. If TI ends with a message saying corrupt or not found database you probably made a spelling mistake in the directory specified in the -repository parameter. If TI ends with a message saying no applicable packages to install it can mean a number of things:
a) If you are unused to modifying the parameters in a shortcut you may have added -repository to the second field in the shortcut tab instead of the top field labeled Target, the two fields look very similar or you just made a typo in "-repository".
b) Open UR again and first choose Modify settings on the left and double check that the directory there is the same directory you specified in -repository. Then choose Manage repository -- Update view and double check that all packages have status Active. If they don't it's not necessary to download again, just select all and hit the modify button to change status from Test to Active.
c) In C:\Program Files\ThinInstaller\logs there are update logs from TI. Open one using Notepad and in edit menu search for the string
Message: 'Share name' to use:
This will tell you in which directory TI is searching for the updates. If it can't find a -repository parameter it uses an empty default databse
d) If you used System Update regularly up to when it stopped working on April 1 and if you have an older model with not so many new driver updates it may actually happen that there are no new updates for your machine (even though you downloaded a lot.) Go to here and enter all fields except model to see what Lenovo shipped after April 1. (Don't click on driver matrices, staying on the downloads and drivers pages will give you a list in chronological order with the ones after April 1 at the top.) Also be aware that the database UR downloads from is at least 2 weeks behind when the drivers first become available on the web. Right now, the only new download in the database applicable to most notebooks after April 1 is the Access Connections 5.22 driver. To check what release you have installed open Access Connections and go to help.
I just did a clean install of a Vista64 system on my T500 and after installing the first few drivers manually (including drivers for harddisk and ethernet) let Thin Installer install the remaining 36 items for me. The only item left to fix was the known bug in the Ricoh 4 in 1 card driver SU installation. (For a clean install you need to run TI or SU more than once, it doesn't find all drivers the first time.)
Message Edited by JaneL on 05-08-2009 10:30 PM
Message Edited by zilla on 2009-05-28 12:48 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

Satellite P300D-13N and XP Installation Issues (Sata-Driver)

Hi,
I have some issues with my XP-Downgrade.
I already tried integrating the Intel Storage Manager drivers into my XP-CD but unfortunately it didn't work.
Probably because i've been integrating ALL drivers, that were available and not just the one that should work for my chipset.
Anyway, in one of the threads in this forum there is a link to [THIS How To|http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...
[Here|http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my device manager (sorry for it being in german) of the pre-installed Vista.
As you can see, there is no information about the controller-Version.
So my question is, WHAT chipset is built into my laptop, because due to the fact that the Intel drivers do not work AND there is no information about any Intel Drive-Controller, I have no idea, which drivers i have to integrate into the XP-CD to get my XP-Installation to work. :(
Help :(
Thank you
Laptop: Satellite P300D-13N PSPDCE

Of course... I didn't want to bore you with the details... but I can do that ;)
I couldn't find any Chipset drivers on amd.com OR the toshiba website so I googled for the chipset and found [This Driver|http://eu.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=883&CategoryID=1&Deta ilName=Driver&MenuID=123&LanID=4] on the ECS-Elitegroup website.
I don't know why AMD doesn't upload this driver on their website, because I don't think I am the only one, who needed this SATA-Driver... ;)
Anyway, with the chipset-driver on my HDD, I created an XP-BootCD. I didn't know which driver (there are 3 or so in the package you can download on the ECS-Website), so I put *all* of them in the CD, which worked just fine. I think the *ahcix86.inf* in *\1_chipset_XP3264\XP3264\RAID7xx\x86\ i* is the important file for WinXP to load, but I'm not sure...
PS: The original catalyst drivers from ati.com do NOT work but the ones you can find [here|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] work fine ;) Just telling you so you don't try 3 different versions from ati.com before you try the toshiba-drivers... like i did :D

Want to see combination of Purchase Order and A/P report at material level

Hello,
Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
I'm specifically looking for a source that includes the PO information at the Vendor / Material level with order value and quantity at the time the PO was created AND accounts payable data at the Vendor / Material level with the invoiced amount and quantity (which may vary for the PO amounts).
Thank you,
Jim

Hi
Have you seen all of the follwoing datasources......
http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
Hope this helps
Regards
N Ganesh

After I have combined some files together to make them into one pdf, can I add and take out files?

After I have combined some files together to make them into one pdf, can I add and take out files?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

How do you combine mutable iphoto libraries and clean up duplicates

how do you combine multiple iphoto libraries and clean up duplicates

If not the only answer is the paid version of iPhoto Library Manager -http://www.fatcatsoftware.com/iplm/ - and maybe duplicate annihaliator -http://www.macupdate.com/app/mac/18748/duplicate-annihilator
You must have IPLM as stated - you may also need DA depending on how thing go with the merge
LN

ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies

Hi ,
My environment is
AIX 6.1
oracle 10.2.0.2
ECC 6.0 SR3
i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
instance is not coming up and all the process are starting and and then again die one by one.
In trace of all wor processess , i can see the error trace as follows:
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
Full trace for work process is
trc file: "dev_w16", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DMB
M systemid 324 (IBM RS/6000 with AIX)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 790666
M
M
M Tue Jan 6 15:41:58 2009
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c 1281]
M ThInit: running on host MBDEVECC
M calling db_connect ...
C Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090106 154158 MBDEVECC
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 6 15:42:00 2009
I MtxInit: 16 0 0
M SHM_PRES_BUF (addr: 0x7000000057a0000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x700000140000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x700000150000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x700000005bd4000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000160000000, size: 656416)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000170002000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 11776 bytes (50 server) at 0x700000180000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 16 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B db_con_shm_ini: WP_ID = 16, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
B dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
B dbexpbuf: Buffer ESM (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
B dbexpbuf: Buffer CUA (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
B dbexpbuf: Buffer OTR (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 6 15:42:01 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x113a30700
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 0x7000001e0000000, size 300000K)
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x113afcb80
=> Stack address = 0xfffffffffffdd60
=> Stack low = 0xfffffffffffb470
=> Stack high = 0xffffffffffff7c0
=> Stack Trace:
 pthread_kill() at 0x9000000005b9450
 praise() at 0x9000000005b8cac
 raise() at 0x90000000002b0f0
 abort() at 0x900000000094528
 ab_init() at 0x1002038d0
 ThrInitRunTime() at 0x1003d1864
 ThStartUp2() at 0x101a9caf0
 ThInit() at 0x1000e9678
 ThStart() at 0x1000fe1b0
 DpMain() at 0x10156c770
 nlsui_main() at 0x101a99998
=> CPU Registers:
 msr = 0xa00000000000d032 iar = 0x09000000005b9450
 ctr = 0xffffffff000000bc lr = 0xffffffffffffffff
 xer = 0x00000000ffffffff cr = 0x0000000000585000
 r00 = 0xffffffffffffffff r01 = 0x0fffffffffffdd60
 r02 = 0xffffffffffffffff r03 = 0x0000000000000000
 r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
 r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
 r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
 r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
 r12 = 0xffffffffffffffff r13 = 0x0000000112d77bd8
 r14 = 0x0000000110cf5dd8 r15 = 0x0000000110028718
 r16 = 0x0000000110001ee8 r17 = 0x0000000000000000
 r18 = 0x0000000000000000 r19 = 0x0000000110027538
 r20 = 0x0000000110572f50 r21 = 0x0000000110572fb0
 r22 = 0x0000000110572f98 r23 = 0x0000000110572f80
 r24 = 0x0000000110573610 r25 = 0x0000000110000e40
 r26 = 0x00000001105737c0 r27 = 0x0000000101baa950
 r28 = 0x0000000112d6fe50 r29 = 0x0000000000000006
 r30 = 0x0000000000000006 r31 = 0x0000000000000001
M ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c 935]
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 16
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_VB2WP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = 16
M mode = 0
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 3
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 2
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c 260]
Can some one please help me.
Regards
Saurabh

This looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
Hope that is helpful.
J. Haynes

HT201628 can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave

can someone please help .. my ipod is not recognized by itunes in windows XP .. i've uninstalled and re-installe i tunes about 10 times now to no avail ?? thank you .. dave

Start here:
iOS: Device not recognized in iTunes for Windows

HT5037 I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I still get the message to download the app, but I did, and the installation was allegedly successful. This even happens after a reboot

I guess that was a bit cryptic. I'm trying to update iPhoto from system 10.5.6, a PowerPC system, to 10.8. The app I downloaded is iPhotoLibraryUpgrader.dmg. I open that and I see Iphoto Library Upgrader.pkg. Igo through the install, which says it completes successfully. However, when I double-click on the iPhoto icon on the dock, I get the oroginal message that the upgrade must be installed. I hope this gives enough information to diagnose the problem. I apologize for the first message's laack of detail.

Unable to install Adobe Digital Reader 3.0. Keep receiving error message "migration has stopped working" and then installation fails.

Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?

Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648)

Something happened and your installation of Windows 8.1 couldn't be completed

I have a brand new Acer with Win 8 installed. I've removed McAfee. Other than that the machine is as delivered.
Trying to download 8.1 and install it from the store. It sits there for a couple of minutes then says:
Your Windows 8.1 installation couldn't be completed
Something happened and the installation of Windows 8.1 can't be completed.
Now apart from this being really annoying could anyone have come up with a less useful message?
I have tried it several times. I've run the compatibility util and it passes. I've tried the store without logging in, then tried the store with logging in.
I've tried it in Firefox, tried it in IE.
Same result every time.

OK, so I posted 2 days ago about this issue, and I resolved it yesterday. I essentially performed a "refresh" under Windows 8, which removed a lot of the updates and applications that could be potential issues.
I then had to go to the Sony website to re-install the latest drivers, SW and driver patches related to my Vaio Duo (I had already updated the firmware and Bios -- necessary to install Windows 8.1--). I then had to re-install all Windows 8 updates,
and magically, the Windows 8.1 update started to download when I clicked on it in the Windows Marketplace. I do not know what was the source of the problem, but the refresh definitely got rid of it. It is a long process however as a lot has to
be reinstalled to bring the refreshed system to its full functionality with the latest manufacturer and Microsoft updates for Windows 8.
I can't see how a non-technical user could perform all these steps to upgrade a recent tablet to Windows 8.1!
Good luck!
Olivier

I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Combining LV Applicatio​n and NIDAQ Installer on One CD

Similar Messages

Maybe you are looking for

Combining LV Application and NIDAQ Installer on One CD