Combining multiple report into one tabbed Excel

If we have a 28 separate Excel reports in BO, is there a way to create one report that will pull in each of these as a separate tab in one single Excel workbook?
They are all using the same universe and similar queries.
Thanks.

If these are WEBI or Crstal Reports you can insert these Reports in Excel Workbook in seperate TABs through Live Office Connections, If you have Live Office installed on your desktop.
OR
With multiple QUERIES in WEBI document you can have a single Report with MERGE DIMENSION option provided you have common dimension for all 28 QUERIES.
Regards
Satya

Similar Messages

Trying to combine multiple reports into one

We have several reports that are targeted to a certain group, for example, one version for the employee to pull their own sales info, one version for supervisors to pull their information for all subordinates, and one version for management and accounting
to pull information for all employees. I have a solution to combine the employee and supervisor reports by using the login ID of the user and showing them "my" and "my subordinates" information. But, I can't figure out a way
to combine the management "all" option. When an employee logs in, they will have a drop down to choose themself and one or more subordinates (if applicable). But they will only see the employee names that are under them. My CFO
needs a report to show all employees but he is not the supervisor. When he logs in, he needs to see a drop down with all employee names.
Does anyone have any ideas for combining all of these options into one report?
Milissa Hartwell

Hi Milissa,
Based on your description, you have three report: employee, supervisors, management and accounting. When an employee use their Login ID login the report, they will have permission to access their own information and their supervisors’ information. You have
meet issue how to configure CFO access permission.
In your case, we can use subreport to work around the issue. We can use three subreport to contain these three report. Then, pass the Login ID to filter these data in corresponding report. According to your description, you have a report which is contains
full information for all employees. Then, we can use Visibilities property to control this subreport’s visibility. For example: =IIF(Fields!LoginID.Value=”CFO”, False, True)
Alternatively, we can use drillthrough to open the corresponding report. The Following document is for your references.
Subreports: http://technet.microsoft.com/en-us/library/dd239314.aspx
Drillthrough Reports:
http://msdn.microsoft.com/en-us/library/ff519554.aspx
If you want to achieve the same effect use SQL query, I recommend you post a thread in the
Transact-SQL forum. It is appropriate and more experts will assist you.
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

HT4059 I'm trying to organize my PDFs in iBooks on my ipad2 and I can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

I'm trying to organize my PDFs in iBooks on my ipad2 and can't figure out how to combine multiple PDFs into one. Any thoughts?

What product do I need to just combine multiple pdfs into one pdf

What product do I need to just combine multiple pdfs into one pdf. Thanks

Are these files fillable forms?
Could you need to combine more than 100 MB of files?

How do I turn off automatic bookmark creation when combining multiple PDFs into one?

When I combine multiple PDFs into one, I need Adobe to use the CUSTOM bookmarks I created in the original PDFs. I do NOT want the additional PDF name as a bookmark in this instance. Is there a way to turn this option OFF in Acrobat Professional? I have version 9.

You can not automatically turn off this action nor can you remove the 'file_name.pdf' heading, but you could add a button or menuitem to remove the 'file_name.pdf' from the bookamarks. Yes, it is one more step to perform when combining PDFs, but is you want until you have all of the PDFs combined you only need do it once.
Removing filename bookmarks created by Acrobat by Sean Stewart
From the above article:
"With the release of Acrobat 6 came the ability to create a composite (binder) document from multiple files, (i.e. File > Create PDF > From Multiple Files.) When this is done, Acrobat automatically inserts a new top level bookmark at the start of each new file. The bookmark title will correspond to the source filename of the source file. While this level of separation can be helpful, it is counterproductive when the user wants the bookmark tree in the merged document to be continuous.
"Here's a sample JavaScript to remove the top level bookmarks from the bookmark tree. This script will look for a ".pdf" extension to decide whether to remove the bookmark."
With some additional coding you can add menu item or toolbar button.

Combine multiple drawings into ONE SHEET

Hello, this is a question on Acrobat Pro, ver 8, using Windows XP. I guess I understand how to combine multiple files into a single PDF-file. However, this morning I happened to see the option mentioned in the subject line. When you go to "Combine files" > "Getting started with combined files" and select "CAD drawings" the description reads: "Combine multiple drawings into one sheet that's easy to navigate and print". How can this be done? I need to combine 8 ea CAD drawings (already converted to PDF) into ONE SHEET for printing without having the need taping 8 pieces of paper together. Arranging the drawing within the CAD application is not an option because the files were delivered by a 3rd party company and they only deliver PDFs

Hi Priya,
You can do this by merging the requets.
   1. goto Se10 and right click on the request and seelct merge requests.
   2. It will ask you from request and to request. Give the request names.
   3. After merging first request contents will be added to second request and
       first request will be deleted.
Like that you can merge 3 requests to one request.
Let me know if you want more info.
Thanks & Regards,
Siri.

How can I combine multiple pdfs into one document?

I need to consolidate multiple docs into one. How do I do that?

It's pretty easy. Open multiple PDF documents in Apple Preview that came with your Mac. Choose View/Thumbnails so you can see the page thumbnail icons. Select any number (or all) of the page thumbnail icons of one document and drag them to any point in the thumbnails of another document.
For example you can drag page 6 of one PDF between pages 40 and 41 of another PDF doc. But it sounds like you want to select all pages of one PDF and drag them to the end of another PDF doc.
If you need more powerful document combining you can use PDFpen or Adobe Acrobat Professional, but they cost money.

When combine multiple PDFs into one, some letters are missing and display wrong letter

Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

Combine multiple jars into one product jar

Hi everybody,
I use multiple third party jar APIs in my applet project. When I built the project, I get one product jar and the other jars in LIB folder. I am wanna produce only one jar including other jars inside. I use netbeans.
Shortly How can I combine all jars into one jar ?
Thanks...

woaw, Got it: http://www.oracle.com/technetwork/articles/javase/single-jar-141905.html
Other jars were signed jars in project. Now, I got only only one jar and unsigned.
If I sign this unique jar, will I see a problem ?

How to combine multiple webservices into one WSDL file

Gurus,
I have 4 four webservices(ws1,ws2,ws3 & ws4) defined in XI. Normally in XI when we define webservice ,WSDL file will be generated for each interface. Now I have 4 related interfaces, so 4 WSDL files will generated. Suppose if I have 100 webservices then 100 WSDL files need to be generated & need to send to other party to consume our services, which is very tedious task & to track also. So is it possible to combine related webservices into one WSDL file? Your inputs will be highly appreciated.
Regards,
Santhosh

Hi,
Instead of trying to combine the interfaces, you can try to define your interface mapping with 4 sender interfaces with in one interface mapping . I think this may give you the result you are expecting.
If you want entire content to be in one interface , then, define single interface which can accomadate, all message ocntent of all 4 interfaces.Means your sender message to contain the 4 datatypes internally.
Regards,
Reyaz

Combining multiple spreadsheets into one workbook with excel

Im working on a project that requires a workbook with all the raw and calculated data merged into one excel workbook. Currently I have all the sheets saved separately but for the life of me can't figure anything out from the examples i've seen so far. How would I Initially go about doing this?

Why save the spreadsheets separately? Can you combine them from the gitgo using the Report Generation toolkit. How are you collecting the data? Is the data entry done manually or is it automated? From your post, it seems you collect the data by some other means other than with LV, but you want to merge the data with LV, correct?
Take a look at the example finder if you haven't done so.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

Combining Multiple Datasets into one tablix

I have a report in Report Builder that has 5 seperate DataSets. Employee, Loan, Deposits, Membership & Credit Card. In each dataset there are different data elements for each depending on the dataset. I am trying to combine all
the data from these datasets into one tablix with the Employee Table as the lead. Ideally i would like to do a lookup function and say match employee number to the employee number in all the datasets and give me a sum/count of the items in that dataset
for each employee number, but the lookup function does not allow me to look up aggregates. I need help!!!
If this was excel i would do a sum if function but i cannot seem to get that to work in Report Builder. I could accomplish displaying the data by encorporating subreports into my table but then i would not be able to add up percentages from each catagory
to try to determine an employee ranking percentage.
Any assistance provided would be greatly appreciated.
Thanks
Robert

You probably will do best by asking this in the InDesign forum that relates to your operating system.

Combine Multiple Worksheets into one table

Hello Everyone!
I have 2 Excel worksheets within the same workbook. Both have identical tables with almost the same fields except for 2 or 3 different columns in one of the sheets. Currently I have a macro assigned to a button on one of the sheets and I have to click on
it to combine the 2 sheets. I also have a Pivot Table on one of the sheets which pulls data from the table on that sheet and displays it on the existing sheet.
I wish to :
1. Combine (merge) these two sheets into one table on a new worksheet when Excel file is opened rather than clicking on the button.
2. Once the Excel file is opened, i would like to have the Pivot Table to pull data off the combined sheet and display it next to the combined table. Essentially I would like the Pivot Table to be refreshed with the new data from the Combined table rather
than from one table.
Is this possible ?
I use the following code to combine the two sheets, but I don't know how to proceed further. Can someone please help me with the rest ?? Thanks in advance.
Here's the code:
Option Explicit
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined Results"
Sheets(2).Activate
Range("A1").EntireRow.Select
Selection.Copy Destination:=Sheets(1).Range("A1")
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Offset(1, 0).Resize(Selection.Rows.Count - 1).Select
Selection.Copy Destination:=Sheets(1).Range("A65536").End(xlUp)(2)
Next
End Sub
The problem with being punctual is, there's nobody there to appreciate it !!!

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, the issue is more related to Excel DEV. I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Combining multiple projects into one larger project?

If I have multiple separate projects and now want to combine them, edits, titles and all into a larger project, is it possible? I expected that it might be possible to drag one project into another and place it intact onto the timeline for the new project. Since every combination of dragging a project around has evidently failed to accomplish what I'm expecting... is there a way to do this?

welcome phiphika to the  board…
in terms of convenience, I would indeed export/share all 6 movies.
to tape, or as Quicktime/FullQuality…
both methods create a lossless copy of your final movie(s).
in step II, import all 6 project into a new iM project, as said above, you don't loose ay quality with that back'n forth copying... only some time ;-)… you can set then chapter markers etc....
besides, your workflow is as mine on larger projects: not 678 clips into one monstrous project of some dozends Gigabytes, just segments…

Combining multiple SWFs into one then optimize file size

I am new to Flash and have been asked to combine six
different SWF files into one. What is the best way to do this? This
seems like the file size would blow up. Can anyone share some
thoughts on how to optimize the final file size so that it is
managable?
Thanks

Ok I will take the last question first, since that is probably the easiest.end
A merged file or a flattened file is the same thing as a composite.
A merged file still has its transparency and data that is outside the canvas area.
A flattened file is a merged file that is converted to a background layer that does not support transparency or data outside the canvas.
A composite can be a merged copy of the existing layers if you use the multiple key strokes I mentioned above. Whereas a merged file is a composite of the original layers. So I personally use the term composite to mean a copy as merged and flatten already explain that process, no need to give them an additional term to mean the same thing.
Generally blend modes work by selecting individual layers before changing the blend mode. However you can group the layers or convert them to a smart object and apply a blend to that group or object.
Normally you set the blend mode as you work on each layer. But you could set all of them to overlay or reduce the opacity to 30 or 50 percent to see through all the layers, then adjust them later on.
I am not sure how it works on the mac, but on windows you can select the blend text box then use the up and down arrow keys to change the blend mode to see how it looks.
I recommend that you go through the free videos on layers, masks, opacity, and layer styles. This will help you dramatically. Also a few books on the subject will help has well.
(free)
http://creativesuitepodcast.com/
http://kelbytv.com/
http://tv.adobe.com/
http://www.youtube.com/
(pay)
http://kelbyone.com/
http://Lynda.com

Combining multiple report into one tabbed Excel

Similar Messages

Maybe you are looking for