Combo Box Clearing

The combo box on my form has a list of valid values. When the form loads the combo is in a state where no value is selected.
Once I have selected a value in the combo and added a record I want to clear the combo box for the next item to be added.
The combo box retains the previous entry and there doesn't seem to be a way to put it in a null or non-selected state.
Is there a way to set a combo box to a state where none of the valid values are selected, once one has been selected.
Thanks for any help.

thanks Dilip and Vishnu,
I added the following to handle the case where the "" value already existed and to remove it if it was added just to clear the combo.
try
ddlStatus.Select("", SAPbouiCOM.BoSearchKey.psk_ByDescription)
catch
ddlStatus.ValidValues.Add("", "")
ddlStatus.Select(ddlStatus.ValidValues.Count - 1, SAPbouiCOM.BoSearchKey.psk_Index)
ddlStatus.ValidValues.Remove(ddlStatus.ValidValues.Count - 1, SAPbouiCOM.BoSearchKey.psk_Index)
end try
Mel

Similar Messages

Clearing the Combo Box

Guys,
I have two combo boxes in my model. Which the User can type in and then select the particular <b>Employee ID</b> and <b>Employee Name</b>.
The issue is, once something is selected, lets say for example I select Employee ID "345" and run it. It brings everything for Employee ID "345".
After I do that, I want to check on Employee Name "HORRIBLE", when I do that it <i>does get me</i> the details for Employee Name "HORRIBLE", but <b><i>does not clear the other box</i></b> "Employee ID" which is still showing "345".
Is there a way to clear the other combo box when I select something from one box?
waiting for a response,
Thanks a lot guys,
Naseer

Hi Nasser ,
Just check whether you can make use of event to fullfil your requirement.
Thanx
Pankaj

How to populate data in the data table on combo box change event

hi
i am deepak .
i am very new to JSF.
my problem is i want to populate data in the datatable on the combo box change event.
for example ---
combo box has name of the city. when i will select a city
the details of the city should populate in the datatable. and if i will select another city then the datatable should change accordingly..
its urgent
reply as soon as possible
thanks in advance

i am using Rational Application Developer to develop my application.
i am using a combo box and i am assigning cityName from the SDO.
and i am declaring a variable in the pageCode eg.
private String cityName;
public void setCityName(String cityName){
this.cityName = cityName;
public String getCityName(){
return cityName;
<h:selectOneMenu id="menu1" styleClass="selectOneMenu" value="#{pc_Test1.loginID}" valueChangeListener="#{pc_Test1.handleMenu1ValueChange}">
                    <f:selectItems
                         value="#{selectitems.pc_Test1.usercombo.LOGINID.LOGINID.toArray}" />
               </h:selectOneMenu>
               <hx:behavior event="onchange" target="menu1" behaviorAction="get"
                    targetAction="box1"></hx:behavior>
and also i am declaring a requestParam type variable named city;
and at the onChangeEvent i am writing the code
public void handleMenu1ValueChange(ValueChangeEvent valueChangedEvent) {
FacesContext context = FacesContext.getCurrentInstance();
Map requestScope = ext.getApplication().createValueBinding("#{requestScope}").getValue(context);
requestScope.put("login",(String)valueChangedEvent.getNewValue());
and also i am creating another SDO which is used to populate data in datatable and in this SDO in the where clause i am using that requestParam .
it is assigning value in the pageCode variable and in the requestParam but it is not populating the dataTable. i don't no why??
it is possible that i may not clear at this point.
please send me the way how my problem can be solved.
thanks in advance

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

Adding an event listener to combo box

I am working on a mortgage calculator and I cannot figure out how to add an event listener to a combo box.
I want to get the mortgage term and interest rate to calucate the mortgage using the combo cox. Here is my program.
Modify the mortgage program to allow the user to input the amount of a mortgage
and then select from a menu of mortgage loans: 7 year at 5.35%, 15 year at 5.50%, and
30 year at 5.75%. Use an array for the different loans. Display the mortgage payment
amount. Then, list the loan balance and interest paid for each payment over the term
of the loan. Allow the user to loop back and enter a new amount and make a new
selection, with resulting new values. Allow user to exit if running as an application
(can't do that for an applet though).
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.text.NumberFormat;
import java.util.Locale;
//creates class MortgageCalculator
public class MortgageCalculator extends JFrame implements ActionListener {
//creates title for calculator
     JPanel row = new JPanel();
     JLabel mortgageCalculator = new JLabel("MORTGAGE CALCULATOR", JLabel.CENTER);
//creates labels and text fields for amount entered
     JPanel firstRow = new JPanel(new GridLayout(3,1,1,1));
     JLabel mortgageLabel = new JLabel("Mortgage Payment $", JLabel.LEFT);
     JTextField mortgageAmount = new JTextField(10);
     JPanel secondRow = new JPanel();
     JLabel termLabel = new JLabel("Mortgage Term/Interest Rate", JLabel.LEFT);
     String[] term = {"7", "15", "30"};
     JComboBox mortgageTerm = new JComboBox(term);
     JPanel thirdRow = new JPanel();
     JLabel interestLabel = new JLabel("Interest Rate (%)", JLabel.LEFT);
     String[] interest = {"5.35", "5.50", "5.75"};
     JComboBox interestRate = new JComboBox(interest);
     JPanel fourthRow = new JPanel(new GridLayout(3, 2, 10, 10));
     JLabel paymentLabel = new JLabel("Monthly Payment $", JLabel.LEFT);
     JTextField monthlyPayment = new JTextField(10);
//create buttons to calculate payment and clear fields
     JPanel fifthRow = new JPanel(new GridLayout(3, 2, 1, 1));
     JButton calculateButton = new JButton("CALCULATE PAYMENT");
     JButton clearButton = new JButton("CLEAR");
     JButton exitButton = new JButton("EXIT");
//Display area
     JPanel sixthRow = new JPanel(new GridLayout(2, 2, 10, 10));
     JLabel displayArea = new JLabel(" ", JLabel.LEFT);
     JTextArea textarea = new JTextArea(" ", 8, 50);
public MortgageCalculator() {
     super("Mortgage Calculator");                     //title of frame
     setSize(550, 350);                                             //size of frame
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     Container pane = getContentPane();
     GridLayout grid = new GridLayout(7, 3, 10, 10);
     pane.setLayout(grid);
     pane.add(row);
     pane.add(mortgageCalculator);
     pane.add(firstRow);
     pane.add(mortgageLabel);
     pane.add(mortgageAmount);
     pane.add(secondRow);
     pane.add(termLabel);
     pane.add(mortgageTerm);
     pane.add(thirdRow);
     pane.add(interestLabel);
     pane.add(interestRate);
     pane.add(fourthRow);
     pane.add(paymentLabel);
     pane.add(monthlyPayment);
     monthlyPayment.setEnabled(false);
     pane.add(fifthRow);
     pane.add(calculateButton);
     pane.add(clearButton);
     pane.add(exitButton);
     pane.add(sixthRow);
     pane.add(textarea); //adds texaarea to frame
     pane.add(displayArea);
     setContentPane(pane);
     setVisible(true);
     //Adds Listener to buttons
     calculateButton.addActionListener(this);
     clearButton.addActionListener(this);
     exitButton.addActionListener(this);
     mortgageTerm.addActionListener(this);
     interestRate.addActionListener(this);
public void actionPerformed(ActionEvent event) {
     Object command = event.getSource();
     JComboBox mortgageTerm = (JComboBox)event.getSource();
     String termYear = (String)mortgageTerm.getSelectedItem();
if (command == calculateButton) //calculates mortgage payment
     int year = Integer.parseInt(mortgageTerm.getText());
     double rate = new Double(interestRate.getText()).doubleValue();
     double mortgage = new Double(mortgageAmount.getText()).doubleValue();
     double interest = rate /100.0 / 12.0;
     double monthly = mortgage *(interest/(1-Math.pow(interest+1,-12.0 * year)));
               NumberFormat myCurrencyFormatter;
               myCurrencyFormatter = NumberFormat.getCurrencyInstance(Locale.US);
               monthlyPayment.setText(myCurrencyFormatter.format(monthly));
     if(command == clearButton) //clears all text fields
               mortgageAmount.setText(null);
               //mortgageTerm.setText(null);
               //interestRate.setText(null);
               monthlyPayment.setText(null);
          if(command == exitButton) //sets exit button
                    System.exit(0);
     public static void main(String[] arguments) {
          MortgageCalculator mor = new MortgageCalculator();

The OP already did this to both JComboBoxes.
mochatay, here is a new actionPerformed method for you to use.
I've improved a few things here and there...
1) You can't just cast the ActionEvent's source into a JComboBox!
What if it was a JButton that fired the event? Then you would get ClassCastExceptions (I'm sure you did)
So check for all options, what the source of the ActionEvent actually was...
2) You can't assume the user will always type in valid data.
So enclose the Integer and Double parse methods in try-catch brakcets.
Then you can do something when you know that the user has entered invalid input
(like tell him/her what a clumsy idiot they are !)
3) As soon as user presses an item in any JComboBox, just re-calculate.
I did this here by programmatically clicking the 'Calculate' button.
Alternatively, you could have a 'calculate' method, which does everything inside the
if(command==calculateButton) if-block.
This will be called when:
a)calculateButton is pressed
b)when either of the JComboBoxes are pressed.
public void actionPerformed (ActionEvent event)
        Object command = event.getSource ();
        if (command == calculateButton) //calculates mortgage payment
            int year = 0;
            double rate = 0;
            double mortgage = 0;
            double interest = 0;
            /* If user has input invalid data, tell him so
            and return (Exit from this method back to where we were before */
            try
                year = Integer.parseInt (mortgageTerm.getSelectedItem ().toString ());
                rate = new Double (interestRate.getSelectedItem ().toString ()).doubleValue ();
                mortgage = new Double (mortgageAmount.getText ()).doubleValue ();
                interest = rate / 100.0 / 12.0;
            catch (NumberFormatException nfe)
                /* Display a message Dialogue box with a message */
                JOptionPane.showMessageDialog (this, "Error! Invalid input!");
                return;
            double monthly = mortgage * (interest / (1 - Math.pow (interest + 1, -12.0 * year)));
            NumberFormat myCurrencyFormatter;
            myCurrencyFormatter = NumberFormat.getCurrencyInstance (Locale.US);
            monthlyPayment.setText (myCurrencyFormatter.format (monthly));
        else if (command == clearButton) //clears all text fields
            /* Better than setting it to null (I think) */
            mortgageAmount.setText ("");
            //mortgageTerm.setText(null);
            //interestRate.setText(null);
            monthlyPayment.setText ("");
        else if (command == exitButton) //sets exit button
            System.exit (0);
        else if (command == mortgageTerm)
            /* Programmatically 'clicks' the button,
            As is user had clicked it */
            calculateButton.doClick ();
        else if (command == interestRate)
            calculateButton.doClick ();
        //JComboBox mortgageTerm = (JComboBox) event.getSource ();
        //String termYear = (String) mortgageTerm.getSelectedItem ();
    }Hope this solves your problems.
I also hope you'll be able to learn from what I've indicated, so you can use similar things yourself
in future!
Regards,
lutha

COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

VBA Userforms – Getting errors when item from combo box is not selected

Hi there
Thank you in advance for taking the time to check this out.
Objective:
I have 2 combo boxes, one is dependent on what has been selected in the first combo box (dynamic named range), they work fine except for an irritating error when the user accidentally clicks in the empty
Cmbox_IncCategory and it won’t allow the user to go back to the
cmbx_Category_Type box if the user forgot he had to make a selection from that first before selecting the
Cmbox_IncCategory.
The error that pops up is “Invalid property value”.
I tried having text in there to say “please select from Cmbox_IncCategory first, but that didn’t fix it.
I tried to ‘If error resume next’ but that didn’t like it either. Now I am stumped.
Main combo box= cmbx_Category_Type
2nd combo box (displaying a list dependent on what was selected in Main combo box)= Cmbox_IncCategory
I know there must be a way to fix it so that if a user clicks on the combo box, but doesn’t make a selection it won’t lock up the form.
Yes, it is a mandatory field, and I was considering using a message box to advise the user that this must be completed, but I am not sure how to do it (and avoid the errors
Here’s the current code I have for the combo boxes.
Me.Cmbox_IncCategory = "" 'Clears the contents of the 2nd combobox when another category is chosen
On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I’d be really grateful if someone could help me out, or perhaps direct me to where I might find some coding that will achieve the result I am seeking.
This links to
My Sample form
With much gratitude,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi Peter,
Thank you for your quick response :) Brave man! :)
Both combo boxes are blank to start with (because nothing has been selected). If I click on the first combo box (cmbx_Category_Type) which lists the main events/category types, but I don't select any thing, and I click in the secondary box
(Cmbox_IncCategory) and then click on any other control, I get an “Invalid property value” error. When I click OK on the error (a few times) and I return to the code window, it gives no indication where/what is breaking
the code/causing the error. I have no choice but to exit the form by stopping in the code window.
If I click on the first textbox, (cmbx_Category_Type), and then do the right thing and make a selection, then I have no problems with the secondary textbox (Cmbox_IncCategory).
As I am not that up on VBA I am trying to follow your instructions... I have changed the code as follows, removed and replaced the rowsource name, but I encounter the very same problem.
When I changed my code from Me.Cmbox_IncCategory="" to yours myCombo.ListIndex = -1 (changing the combo box name to reflect my combo box name) and adding the second line of code ...
Me.Cmbox_IncCategory.ListIndex = 0 I still got the same behaviour and error.
I even tried moving each row of the named rows down one row (so that there would be a 'blank' row which could be selected to get out of trouble, but it wasn't very successful either.
Have you opened my form to see what happens, I included the link so whoever was looking at my problem (and yes, I have many I know), could see for themselves what it is doing/not doing.
The code now reads as below (is this what you meant?) - the results were as I mentioned above.
Me.Cmbox_IncCategory.ListIndex = -1 'Clears the contents of the 2nd combobox when another category is chosen
Me.Cmbox_IncCategory.ListIndex = 0
' On Error Resume Next
'I can't seem to have the Incident Category combobox to be empty when the form is open _
I have tried Cmbox_IncCategory.Value = "", but I get an error. I then tried Cmbox_IncCategory.text = "" _
but also get the error. I don't know how else to get it to work .. I tried both codes in the _
form_initialize, but get an error ... I'm stumped !
Select Case Me.cmbx_Category_Type
Case "Crime"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_CRIME"
Case "Property Damage - Minor - NS"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_PROPRTY_NS"
Case "Property Damage - Significant - S"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_Proprty_S"
Case "Safety"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SAFETY"
Case "Security Breach"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_BREACH_S"
Case "Support"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_SUPPORT"
Case "Vehicle"
Me.Cmbox_IncCategory.RowSource = "Inc_Cat_VEHICLE_S"
End Select
End Sub
I appreciate your patience :) I am growing in knowledge, but its a slow process. Please let me know if there is anything else I can help clarify for you :)
This links to
My Sample form
Thanking you again
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Newb deserving assistance with Adobe Javascript (check boxes and combo boxes)

Hi, I'm a newb when it comes to javascript (using adobe acrobat pro 6.0).
I am working on a form that will allow me to autofill checkboxes based off of information chosen. Ideally, I would like to have a selection from a combo box autofill/auto checkmark check boxes. Alternatively, I would be willing to just have different selections presented with check boxes that when filled, would auto checkmark other check boxes (I know how to do this one, but I am not sure how to clear the check boxes if the initial one is unchecked).
I have the action button tied to the mouse up function. This just errors out.
var Citrix = this.getField("Citrix")
var Appro = this.getField("Appro")
var SAS = this.getField("SAS")
if (event.target.value=="Yes") {
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
else {
Citrix.checkThisBox = false
Appro.checkThisBox = false
SAS.checkThisBox = false
I have this that works, but I don't know how to clear the buttons when "Associate" is unchecked.
if(this.getField("Associate").isBoxChecked(0));
this.getField("Citrix").checkThisBox(0, true);
this.getField("Appro").checkThisBox(0, true);
this.getField("SAS").checkThisBox(0, true);
The other way I was working on it, was to use a combo box to autofill/checkmark check boxes. But this code doesn't work either.
function calculateTextField()
// get the value of the combo box
var comboValue = this.getField("Select").value;
// get the state of the checkbox
var isChecked = (this.getField("Citrix").value == "Yes");
var textFieldValue = "";
console.println(comboValue);
if (isChecked)
if (comboValue == 0)
textFieldValue = "";
if (comboValue == "Associate")
(this.getField("Citrix").value == "Yes");
else if (comboValue == "Specialist")
(this.getField("Citrix").value == "Yes");
else if (comboValue == "Team Leader")
(this.getField("Citrix").value == "No");
else
(this.getField("Citrix").value == "No");
else
textFieldValue = "";
this.getField("Select").value = textFieldValue;
Can anyone please assist me with this?
Thanks,
Chris

Hi Gene,
Thank you for the response. Are you saying that my initial formula should look more like this; ?
var Citrix = this.getField("Citrix")
var Appro = this.getField("Appro")
var SAS = this.getField("SAS")
if (event.target.value=="Yes") {
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
else {
if (event.target.value=="Off")
Citrix.checkThisBox = true
Appro.checkThisBox = true
SAS.checkThisBox = true
Thanks,
Chris

Populate 2nd combo box based on value selected in 1st combo box

I am still using Acrobat 6 though I may be upgrading soon to Acrobat 8. I have a form with two combo boxes, the first "state" has values of MN and WI. Based on which value the user picks I would like to populate a "county" combo box with lists of counties that we deal with.
Thanks,
Gene

One can set the option and export value using an arry:<br /><br />// document level script<br />// Master List of Lists <br />// Each entry in this object listeral is the name of a State <br />//Manually enter the State Names into the state field combo box <br />// The associated value is the item list, where each item is a name value pair, [<County> and [county code, zip code]] <br /><br />// state: ["county name", ["county code", "zip code"]]<br />var oStateNames = {MN: [["-", ["", ""] ], <br /> ["St. Louis", ["MNStl", "55001"] ], <br /> ["Carlton", ["MNSCrl", "55002"] ], <br /> ["Pine", ["MNPin", "55003"] ],<br /> ["Cook", ["MNCok", "55004"] ] <br /> ], <br /> WI: [["-", [" ", " "] ],<br /> ["Douglas", ["WIDou", "55005"] ] ,<br /> ["Bayfield", ["WIBay", "55006"] ],<br /> ["Burnette", ["WIBur", "55007"] ],<br /> ["Ashland", ["WIAsh", "55008"] ]<br /> ]<br /> }; <br /><br />//SetCountyEntries() on keystroke entry in state field <br />function SetCountyEntries() <br />{ <br /> if(event.willCommit) <br /> { <br /> // Get the new counties list from the Master List <br /> // Since the selection is being committed, <br /> // event.value contains the State name <br /> var lst = oStateNames[event.value]; <br /> // Clear the county list if there are no counties for the selected state <br /> this.getField("ee.address.county").clearItems();<br /> this.resetForm(["ee.address.code", "ee.address.zip"]);<br /> if( (lst != null) && (lst.length > 0) )<br /> this.getField("ee.address.county").setItems(lst); // set opiton and export value<br /> } <br />} <br />// end document level script<br /><br />For the combo box "ee.address.county" one can create an array from the export value to populate the county code and zip code<br /><br />// custom keystroke for county combo box<br />if(event.willCommit & event.value != "") {<br />// split county and zip codes<br />var aCodes = this.getField(event.target.name).value.split(",");<br />this.getField("ee.address.code").value = aCodes[0];<br />this.getField("ee.address.zip").value = aCodes[1];<br />}<br />// end custom key stroke code

Editable Combo box in a JTable

Hi,
Is it possible to have an editable combo Box in a JTable with an item Listener attached to the combo Box?
Based on whatever value the user enters in that column that is rendered as a combo Box(editable) i should be able to do some validation. Is this possible?
Thanks in advance for your time and patience.
Archana

Here's a start:
public class FileModel5 extends AbstractTableModel
public boolean isEditable = false;
protected static int NUM_COLUMNS = 3;
// initialize number of rows to start out with ...
protected static int START_NUM_ROWS = 0;
protected int nextEmptyRow = 0;
protected int numRows = 0;
static final public String file = "File";
static final public String mailName = "Mail Id";
static final public String postName = "Post Office Id";
static final public String columnNames[] = {"File", "Mail Id", "Post Office Id"};
// List of data
protected Vector data = null;
public FileModel5()
data = new Vector();
public boolean isCellEditable(int rowIndex, int columnIndex)
// The 2nd & 3rd column or Value field is editable
if(isEditable)
if(columnIndex > 0)
return true;
return false;
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c)
return getValueAt(0, c).getClass();
* Retrieves number of columns
public synchronized int getColumnCount()
return NUM_COLUMNS;
* Get a column name
public String getColumnName(int col)
return columnNames[col];
* Retrieves number of records
public synchronized int getRowCount()
if (numRows < START_NUM_ROWS)
return START_NUM_ROWS;
else
return numRows;
* Returns cell information of a record at location row,column
public synchronized Object getValueAt(int row, int column)
try
FileRecord5 p = (FileRecord5)data.elementAt(row);
switch (column)
case 0:
return (String)p.file;
case 1:
return (String)p.mailName;
case 2:
return (String)p.postName;
catch (Exception e)
return "";
public void setValueAt(Object aValue, int row, int column)
FileRecord5 arow = (FileRecord5)data.elementAt(row);
arow.setElementAt((String)aValue, column);
fireTableCellUpdated(row, column);
* Returns information of an entire record at location row
public synchronized FileRecord5 getRecordAt(int row) throws Exception
try
return (FileRecord5)data.elementAt(row);
catch (Exception e)
throw new Exception("Record not found");
* Used to add or update a record
* @param tableRecord
public synchronized void updateRecord(FileRecord5 tableRecord)
String file = tableRecord.file;
FileRecord5 p = null;
int index = -1;
boolean found = false;
boolean addedRow = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
{ //update
data.setElementAt(tableRecord, index);
else
if (numRows <= nextEmptyRow)
//add a row
numRows++;
addedRow = true;
index = nextEmptyRow;
data.addElement(tableRecord);
//Notify listeners that the data changed.
if (addedRow)
nextEmptyRow++;
fireTableRowsInserted(index, index);
else
fireTableRowsUpdated(index, index);
* Used to delete a record
public synchronized void deleteRecord(String file)
FileRecord5 p = null;
int index = -1;
boolean found = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
data.removeElementAt(i);
nextEmptyRow--;
numRows--;
fireTableRowsDeleted(START_NUM_ROWS, numRows);
* Clears all records
public synchronized void clear()
int oldNumRows = numRows;
numRows = START_NUM_ROWS;
data.removeAllElements();
nextEmptyRow = 0;
if (oldNumRows > START_NUM_ROWS)
fireTableRowsDeleted(START_NUM_ROWS, oldNumRows - 1);
fireTableRowsUpdated(0, START_NUM_ROWS - 1);
* Loads the values into the combo box within the table for mail id
public void setUpMailColumn(JTable mapTable, ArrayList mailList)
TableColumn col = mapTable.getColumnModel().getColumn(1);
javax.swing.JComboBox comboMail = new javax.swing.JComboBox();
int s = mailList.size();
for(int i=0; i<s; i++)
comboMail.addItem(mailList.get(i));
col.setCellEditor(new DefaultCellEditor(comboMail));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for mail Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Mail Id to see a list of choices");
* Loads the values into the combo box within the table for post office id
public void setUpPostColumn(JTable mapTable, ArrayList postList)
TableColumn col = mapTable.getColumnModel().getColumn(2);
javax.swing.JComboBox combo = new javax.swing.JComboBox();
int s = postList.size();
for(int i=0; i<s; i++)
combo.addItem(postList.get(i));
col.setCellEditor(new DefaultCellEditor(combo));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for post office Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Post Office Id to see a list of choices");
}

Combo box in JavaScript and store the combo box values into database

i am a developer, i have a task ie.. i have combo box in JavaScript and i have to store the combo box values into database through JavaServerPage..
i please every one to have a look on this and please reply soon....

dear sir,
your suggestions are really greater the god.............
i have applied as you said , now i am the page as updated and also i nform you that its multi select ....
i will show the codings , then u will get a clear identification
<script language= "JavaScript">

</script>
<form method="POST" name="theForm" action="update.jsp">
<table bgcolor="white" border="1" cellpadding="5" cellspacing="2" align="center">
<tr><td align="center">
<select id=menu1 size=10 multiple>
<option>javascript</option>
<option>php</option>
<option>Zeo</option>
<option>asp</option>
<option>jsp</option>
<option>ajax</option>
<option>struts</option>
</select>
<p align="center"><input type="button" onClick="one2two()" value=" >> "></p>
</td><td align="center">
Languages you know:<BR>
<SELECT NAME="language" multiple>
<OPTION VALUE="c">C
<OPTION VALUE="c++">C++
</SELECT>
<p align="center"><input type="button" onClick="two2one()" value=" << " ></p>
</td></tr></table>
<center><input type="submit" value="update"></center>
</form>
<h4><u>Back<h4>
<script language= "JavaScript">
var m1 = document.theForm.menu1;
var m2 = document.theForm.language;
</script>
</body>
</html>

Problems with a combo box in dynpro

Hi guys, im creating a combo box in a dynpro, but is not showing anything.
the code is the following:
AT the screen painter..
MODULE USER_COMMAND_0100.
   PROCESS ON VALUE-REQUEST.
FIELD TI_COMBO MODULE create_dropdown_box.
*then the module in the main program.....
module create_dropdown_box input.
TYPES: BEGIN OF type_carrid,
         op1(20),
         ID TYPE N,
       END OF type_carrid.
DATA ti_combo TYPE STANDARD TABLE OF type_carrid WITH HEADER LINE.
ti_combo-op1 = 'Not processed'.
TI_COMBO-ID = 1.
append ti_combo.
ti_combo-op1 = 'Duplicated.
append ti_combo.
ti_combo-op1 = 'For Payroll'.
append ti_combo.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
        RETFIELD = 'ID'
        DYNPPROG = SY-REPID
        DYNPNR = '100'
        DYNPROFIELD = 'TI_COMBO'
        VALUE_ORG = 'S'
       TABLES
            value_tab       = ti_combo
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
endmodule.
Edited by: javier santana on May 7, 2008 5:47 PM

Hi,
Check the below code.
TYPE-POOLS: VRM.
DATA:V_NUM TYPE I.
DATA:NAME TYPE VRM_ID,
     LIST TYPE VRM_VALUES,
     VALUE LIKE LINE OF LIST.
DATA:I_WORKPATTERN LIKE ZWORKPAT OCCURS 0 WITH HEADER LINE.
DATA:ZPATTXT(60).
MODULE WORKPATTERN_LISTBOX OUTPUT.
NAME = 'P9434-ZWORKPATTERN'.
    IF V_NUM IS INITIAL.
    CLEAR I_WORKPATTERN.
    REFRESH I_WORKPATTERN.
    SELECT *
           FROM ZWORKPAT
           INTO TABLE I_WORKPATTERN.
    IF NOT I_WORKPATTERN[] IS INITIAL.
      LOOP AT I_WORKPATTERN.
        VALUE-KEY = I_WORKPATTERN-ZWORKPATTERN.
        VALUE-TEXT = I_WORKPATTERN-ZWORKPATTERN.
        APPEND VALUE TO LIST.
      ENDLOOP.
    ENDIF.
    CALL FUNCTION 'VRM_SET_VALUES'
      EXPORTING
        ID                    = NAME
        VALUES                = LIST
     EXCEPTIONS
       ID_ILLEGAL_NAME       = 1
       OTHERS                = 2.
    IF SY-SUBRC <> 0.
      CLEAR SY-SUBRC.
    ENDIF.
    V_NUM = V_NUM + 1.
    ENDIF.

Problem in event handling of combo box in JTable cell

Hi,
I have a combo box as an editor for a column cells in JTable. I have a event listener for this combo box. When ever I click on the JTable cell whose editor is combo box,
I get the following exception,
Exception occurred during event dispatching:
java.lang.NullPointerException
     at javax.swing.plaf.basic.BasicTableUI$MouseInputHandler.setDispatchComponent(Unknown Source)
     at javax.swing.plaf.basic.BasicTableUI$MouseInputHandler.mousePressed(Unknown Source)
     at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Can any one tell me how to over come this problem.
Thanks,
Raghu

Here's an example of the model I used in my JTable. I've placed 2 comboBoxes with no problems.
Hope this helps.
public class FileModel5 extends AbstractTableModel
public boolean isEditable = false;
protected static int NUM_COLUMNS = 3;
// initialize number of rows to start out with ...
protected static int START_NUM_ROWS = 0;
protected int nextEmptyRow = 0;
protected int numRows = 0;
static final public String file = "File";
static final public String mailName = "Mail Id";
static final public String postName = "Post Office Id";
static final public String columnNames[] = {"File", "Mail Id", "Post Office Id"};
// List of data
protected Vector data = null;
public FileModel5()
data = new Vector();
public boolean isCellEditable(int rowIndex, int columnIndex)
// The 2nd & 3rd column or Value field is editable
if(isEditable)
if(columnIndex > 0)
return true;
return false;
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c)
return getValueAt(0, c).getClass();
* Retrieves number of columns
public synchronized int getColumnCount()
return NUM_COLUMNS;
* Get a column name
public String getColumnName(int col)
return columnNames[col];
* Retrieves number of records
public synchronized int getRowCount()
if (numRows < START_NUM_ROWS)
return START_NUM_ROWS;
else
return numRows;
* Returns cell information of a record at location row,column
public synchronized Object getValueAt(int row, int column)
try
FileRecord5 p = (FileRecord5)data.elementAt(row);
switch (column)
case 0:
return (String)p.file;
case 1:
return (String)p.mailName;
case 2:
return (String)p.postName;
catch (Exception e)
return "";
public void setValueAt(Object aValue, int row, int column)
FileRecord5 arow = (FileRecord5)data.elementAt(row);
arow.setElementAt((String)aValue, column);
fireTableCellUpdated(row, column);
* Returns information of an entire record at location row
public synchronized FileRecord5 getRecordAt(int row) throws Exception
try
return (FileRecord5)data.elementAt(row);
catch (Exception e)
throw new Exception("Record not found");
* Used to add or update a record
* @param tableRecord
public synchronized void updateRecord(FileRecord5 tableRecord)
String file = tableRecord.file;
FileRecord5 p = null;
int index = -1;
boolean found = false;
boolean addedRow = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
{ //update
data.setElementAt(tableRecord, index);
else
if (numRows <= nextEmptyRow)
//add a row
numRows++;
addedRow = true;
index = nextEmptyRow;
data.addElement(tableRecord);
//Notify listeners that the data changed.
if (addedRow)
nextEmptyRow++;
fireTableRowsInserted(index, index);
else
fireTableRowsUpdated(index, index);
* Used to delete a record
public synchronized void deleteRecord(String file)
FileRecord5 p = null;
int index = -1;
boolean found = false;
int i = 0;
while (!found && (i < nextEmptyRow))
p = (FileRecord5)data.elementAt(i);
if (p.file.equals(file))
found = true;
index = i;
} else
i++;
if (found)
data.removeElementAt(i);
nextEmptyRow--;
numRows--;
fireTableRowsDeleted(START_NUM_ROWS, numRows);
* Clears all records
public synchronized void clear()
int oldNumRows = numRows;
numRows = START_NUM_ROWS;
data.removeAllElements();
nextEmptyRow = 0;
if (oldNumRows > START_NUM_ROWS)
fireTableRowsDeleted(START_NUM_ROWS, oldNumRows - 1);
fireTableRowsUpdated(0, START_NUM_ROWS - 1);
* Loads the values into the combo box within the table for mail id
public void setUpMailColumn(JTable mapTable, ArrayList mailList)
TableColumn col = mapTable.getColumnModel().getColumn(1);
javax.swing.JComboBox comboMail = new javax.swing.JComboBox();
int s = mailList.size();
for(int i=0; i<s; i++)
comboMail.addItem(mailList.get(i));
col.setCellEditor(new DefaultCellEditor(comboMail));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for mail Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Mail Id to see a list of choices");
* Loads the values into the combo box within the table for post office id
public void setUpPostColumn(JTable mapTable, ArrayList postList)
TableColumn col = mapTable.getColumnModel().getColumn(2);
javax.swing.JComboBox combo = new javax.swing.JComboBox();
int s = postList.size();
for(int i=0; i<s; i++)
combo.addItem(postList.get(i));
col.setCellEditor(new DefaultCellEditor(combo));
//Set up tool tips.
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Click for post office Id list");
col.setCellRenderer(renderer);
//Set up tool tip for the mailName column header.
TableCellRenderer headerRenderer = col.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer)
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the Post Office Id to see a list of choices");
}

Displaying text in a combo box.

Hi, i was wondering if anyone could help me finish an application i am working on. I have two forms, one inputs dat to a text file and another retrieves it. i want to display the text in a combo box and then click an event in the combo box and a description
of the event will appear in a text box, also if i select a date on the second form the events in the combo box change for that date if there is events for it. the first form is working fine , i was looking for help with the second one please. my code
so far is:
namespace TicketInformation
public partial class TicketInformationForm : Form
public TicketInformationForm()
InitializeComponent();
//creating the community events list.
List<Community_Event> CommnunityEvents;
//create the Create Event list method.
private void CreateEventList()
CommnunityEvents = new List<Community_Event>();
// call the extract Data method.
ExtractData();
//Clear any events from the combo box before proceeding.
eventComboBox.Items.Clear();
//for each event item in the Commuity event list,add it to the eventComboBox.
foreach (Community_Event item in CommnunityEvents)
eventComboBox.Items.Add(item.Description);
//if the events count is greater then 0, display the following
if (CommnunityEvents.Count > 0)
//if there are no events for the date selected display the following
eventComboBox.Text = " -Events- ";
descriptionTextBox.Text = "Pick an event";
}//end if
else
//if there are no events for the date selected display the following
eventComboBox.Text = " No Events ";
descriptionTextBox.Text = "No events today.";
}//end else
//Creating the Method ExtractData
private void ExtractData()
CommnunityEvents.Clear();
// load the data from the file
List<Community_Event> tempList = new List<Community_Event>();
//string[] fileLines = File.ReadLines(@"C:\Users\IAN\Documents\calendar.txt");
foreach(string line in File.ReadLines("calendar.txt"))
string[] items = line.Split(",".ToCharArray());
if (items.Length >= 5)
Community_Event newEvent = new Community_Event();
newEvent.Day = Convert.ToInt32(items[0]);//Converting the Integer to a string.
newEvent.Time = items[1];
newEvent.Price = Convert.ToDecimal(items[2]);//Converting the decimal to a string.
newEvent.Event = items[3];
newEvent.Description = items[4];
//add the new events to the Comminity Events list.
CommnunityEvents.Add(newEvent);
CommnunityEvents = (from ev in tempList
where ev.Day == 1
select ev).ToList();
private void dateMonthCalendar_DateChanged(object sender, DateRangeEventArgs e)
//calling the create event list method to display any events in the eventscombo box.
CreateEventList();
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
private void descriptionTextBox_TextChanged(object sender, EventArgs e)
private void TicketInformationForm_Load(object sender, EventArgs e)
//calling the create event list to open the form with today's events displayed if any.
CreateEventList();
public class Community_Event
//Declare a DayValue property of type int
private int DayValue;//day of the event
public int Day// Name of the Property
get
return DayValue;
set
DayValue = value;
//Declare a TimeValue property of type string
private string timeValue;//time of the event
public string Time// Name of the Property
get
return timeValue;
set
timeValue = value;
//Declare a priceValue property of type Decimal
private decimal priceValue;//price of the event
public decimal Price// Name of the Property
get
return priceValue;
set
priceValue = value;
//Declare a eventNameValue property of type string
private string eventNameValue;//name of the event
public string Event// Name of the Property
get
return eventNameValue;
set
eventNameValue = value;
//Declare a DescriptionValue of type string
private string DescriptionValue;//description of the event
public string Description// Name of the Property
get
return DescriptionValue;
set
DescriptionValue = value;
Thanks
D

Hi Dylan2412,
According to your description, you'd like to pass the ComboBox.Text to the second form's TextBox.
In Form1:
private void button1_Click(object sender, EventArgs e)
Form2 f2 = new Form2(this.comboBox1.Text); //pass the comboBox1.Text
f2.Show();
In Form2:
public Form2(string s) //get the string;
InitializeComponent();
this.textBox1.Text = s;
You could get the comBoBox refer to this sample above.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Combo Box Valid Values Update

Hi All,
I'm developing a Form which has BP Code and a ComboBox which, after entering a valid Supplier in the BPCode EditText, updates the ComboBox with the Supplier Catalog Numbers of all the Items where the CardCode (in OITM) matches the BPCode. I have this working for the first change of BPCode but when the BPCode changes I want to update the ComboBox ValidValues. I have tried many methods but cannot remove the ValidValues which are already there. I have tried linking the ComboBox to a DataTable, clearing the DataTable and rebinding but this doesn't seem to work either.
Any help on removing ValidValues from a list when I don't know what is already there (as the VV list is now out of scope) or adding a data bound ComboBox would be most appreciated.
Thanks in anticipation,
David

Hi David,
Try following
        'get the reference to the state combo box
        oCombo = oForm.Items.Item("combo box unique id").Specific
        'remove existing items if any
        'before adding new items
        For Flag = 0 To oCombo.ValidValues.Count - 1
            oCombo.ValidValues.Remove(0, SAPbouiCOM.BoSearchKey.psk_Index)
        Next
After this, use a recordset or datatable to retrieve the records, and than a loop to add valid values to the combo box.
Rahul

Combo Box Clearing

Similar Messages

Maybe you are looking for