Combox box does not populuate for very first record creation in table

Hello All,
I am using ADF 11.2 BC and ADF Faces in my project. I have a ViewObject based on EntityObject with LOV's defined. When the environment is fresh i.e. no data is present in EntityObject physical table, drop down downs are not populated with I attempt to create a new record using ADF JSF page. This page is within ADF Train and when I hit Next button validation error pops up and after that I see drop down values. Is there some configuration I am missing to initialize the drop downs?
Please advise.
Thanks,
Dipal

Repost

Similar Messages

Firefox does not start for very long after clicking!!If another browser is opened Firefox opens after that.

Firefox does not open after clicking on the Firefox icon on my desktop. Occasionally it opens after a very long time and that also a number of pages open at the same time equal to the number of times hat I clicked the icon trying to open. If I open another browser like Google Chrome after trying to open Firefox then Firefox follows it to open much quicker after Google chrome opens.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Page does not load for the first time

Hi,
When I enter the URL to load the page, it does not work, i.e I get page not found message. But when I refresh(F5) the page gets loaded. This is just not for the login page but all my report and form pages and this happens only for the first time I try to access in the day. I couldnt understand why it happens? Can someone help me to understand the problem I am facing?
Thanks

What does the appache log says?
Your appache server home > Apache > Apache > logs > access_log.current_date
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

List search box does not work for some users Sharepoint 2013

Hello,
I have a list for which I've enabled a search box (from web part settings, miscellaneous).
The problem is that for me and the others admins the search works perfectly, but for the other users who have only Read
privilege the search doesn't work and shows the loading icon forever.
Why does this happen?
How can I enable search box
for the list for all users?
Please help
me

Hi，
For troubleshooting your issue, please go to Central Administration -> Application Management ->Manage Service applications-> select search service application -> click Permissions -> add "Everyone" with Full Control.
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SBO 2005 combo box does not update value at first time

Hi!I developed an addon for sbo 2004 with a combo box populated with the months of the year, and it works. The same code run on SBO 2005 works only after the second selection. Has anyone found the same problem?

definition of the item:
item = form.Items.Add("oMese", SAPbouiCOM.BoFormItemTypes.it_COMBO_BOX)
                item.Left = 245
                item.Top = 5
                item.Width = 80
                item.DisplayDesc = True
                combo = item.Specific
                combo.DataBind.SetBound(True, "", "uMese")
                combo.ValidValues.Add(1, "Gennaio")
                combo.ValidValues.Add(2, "Febbraio")
event handling:
inside ItemEvent in case the item is selected
Case SAPbouiCOM.BoEventTypes.et_COMBO_SELECT
                    Select Case pVal.FormUID
                        Case "PRG_UFM_0002_RegIVAAcq"
                            retCode = oTy_RACQ.FormComboSelect(pVal, BubbleEvent)
Public Shared Function FormComboSelect(ByVal pVal As SAPbouiCOM.ItemEvent, _
                                           ByRef BubbleEvent As Boolean, _
                                           ByRef funCaller As Object, _
                                           ByVal funCallerID As Integer, _
                                           ByRef aForm As SAPbouiCOM.Form) _
                                           As Integer
        Dim msg As String
        Dim edt As SAPbouiCOM.EditText
        Dim cmb As SAPbouiCOM.ComboBox
        Dim obt As SAPbouiCOM.OptionBtn
        Dim cbx As SAPbouiCOM.CheckBox
        Dim mtx As SAPbouiCOM.Matrix
        Try
            If pVal.Before_Action = True Then
                Select Case pVal.ItemUID
                    Case "oMese"
                        Dim stre As New strEstremi
                        cmb = aForm.Items.Item("oMese").Specific
                        edt = aForm.Items.Item("anno").Specific
                        If Not cmb.Selected Is Nothing Then
                            GetEstremiPeriod(edt.Value, cmb.Selected.Value, "M", stre)
                            edt = aForm.Items.Item("dtFrom").Specific
                            edt.String = stre.dtFrom
                            edt = aForm.Items.Item("dtTo").Specific
                            edt.String = stre.dtTo
                        End If
end function
thank you I hope is enough otherwise please tell me

Asp code does not render for first record in looped recordset

I have posted this question on a javascript forum as it
contains javascript code however it was believed to be an asp
issue.
The following head section javascript code contains the
function showBigImage( isource,bigImage,header ) function call of
discussion:
var currentImage;
function showBigImage( isource,bigImage,header ) {
var theImage = document.getElementById( 'largeimage' );
theImage.src = isource;
currentImage = bigImage;
document.getElementById( 'photoHeader' ).innerHTML=header;
document.getElementById( 'largeimage' ).alt=header;
The following rendered looped recordset code illustrates how
the "header" parameter of this showBigImage(
isource,bigImage,header ) function call does not render ONLY FOR
THE FIRST RECORD OF THE RECORDSET as it is blank:
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/portable_stage.jpg&width=250','images/portable_stage.jpg',''
)"> <img
src="imagescript.asp?path=images/portable_stage.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/seated_riserset.jpg&width=250','images/seated_riserset.jpg', 'Portable
stage configuration using 9 units of the 3 ft x 8 ft platforms in 3
different heights' )"> <img
src="imagescript.asp?path=images/seated_riserset.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/Stageset.jpg&width=250','images/Stageset.jpg','Portable
stage configuration using 16 units of the 4 ft x 8 ft platforms'
)"> <img
src="imagescript.asp?path=images/Stageset.jpg&width=36"
border="0" alt="" /> </td> </a>
<a href= "javascript:;" > <td height=36
valign="middle" class="small_img" onmouseover="showBigImage(
'imagescript.asp?path=images/Runset.jpg&width=250','images/Runset.jpg','Portable
stage runset configuration' )"> <img
src="imagescript.asp?path=images/Runset.jpg&width=36"
border="0" alt="" /> </td> </a>
Because of this problem, the caption text does not display
for this first image record once the thumbnail images are moused
over. You can view this page example at
http://www.canchair.com/new_web_product_detail.asp?ProductID=198&ProductFamily=1&ProductFa milySub=10

Please help with this issue!!!

I want to create a document/spreadsheet (whichever) that I can send to agencies to type in information for work projects. Any ideas? I have an Excel file but it does not convert over very well and I am having trouble making changes to it.

Need to create a new spreadsheet or be able to edit the one I have.
I use this spreadsheet as a work order form for social service agencies. They enter name address etc., and then there are various work projects that they can select as well.
The one I have from the organization I work with is an excel file but it does not convert over very well. Instead of being 7 pages it is more like 11 or so because things run off the page. I am trying to delete certain things and move them over but not working out very well so thought it might be easier to start over fresh.
Is numbers the program to use? If so, any useful tips?

If the form is going to be used on an iPad, Numbers is the only game in town.
Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based.
If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
I hope that helps.

My search box does not display suggestions even though it is set to (it displays past searches, but not suggestions). I have looked at the FAQs and everything is set for it to show suggestions.

My search box does not show suggestions although it is set to show suggestions.

MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly. I would think that someone would be intelligent enough to do that before buying a new device, but......
iMessage could be an activation issue or a network issue.
Have you tried Settings > General > Reset > Reset Network Settings?
Does iMessage work consistently on Wi-Fi?

On demand error - box does not have enough credit

For the duration of the day I cannot watch free on demand programs. For example, when I attempt to play an NBC show it states that that my box does not have enough credit and to call customer service. I am calling the The number given and entering the code 8362 as given in the error message. The line rings and then disconnects. I tried calling the customer svc nbr specified in the customer svc screen from the menu option. It rings and then just disconnects. Very disappointed that a company like Verizon does not have the methods or technology to accept inbound calls to their customer service centers. I am posting here in hopes of obtaining some support from verizon since I cannot obtain support by calling.

NoShoreMA Contributor said
"This happened to me earlier. Go to Menu and select Customer Support. Select In Home Agent. I tried to reboot (only gave me different error code). Select Set Top Box Auto Correct. This seemed to have done the trick. What do you know.....I am watching the movie that shut down when this all started. Good Luck!"
worked for me hope it works for you

OVM Server 2.1.2 does not prompt for Networking

OVM Server 2.1.2 does not prompt for a network setup (ie DHCP or static IPs).
- I tried re-installing this several times
This same machine works with native Enterprise Linux 5.2 x86-64 networking.
The motherboard has two onboard Realtek 8111C chips (10/100/1000 Mbit)
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2842
Will setting up networking by hand work with OVM Server 2.1.2?

OK I finaly made my Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller to work.
First install an Ethernet card in your box that OVM supports. This to make the OVM installation run smoothly.
When OVM is up and running follow the steps in [Mini-HOWTO] RPMs needed to compile a kernel-module on / for VM Server to get a working environment to compile modules.
Now get the driver for the unsupported card from ftp://61.56.86.122/cn/nic/r8168-8.008.00.tar.bz2 .
Unpack the file by running;:
tar -jxvf r8168-8.008.00.tar.bz2
Now follow the steps in the included readme file to compile and install the driver.
After this I edited the file /etc/modules.conf and changed the line
alias eth0 xxx
to
alias eth0 r8168
I then turned of the machine and removed my temporary network card.
When booted I ran system-config-network to configure the network once more to the original values I entered when I installed.

Bloody stupid thing to do: why not IOS6 for iPad first generation ??

I do not understand why this version is not available for the first generation. this is stupid ... The iPhone 3GS ist older !!! It's very very stupid and I'm very very angry

kkuelor,
I just had mine do the same thing (first gen iPad on iOS 5.1). It seems to have occured overnight. Odd that the iPad is failing at the exact 2 year mark or so. I got my first gen on the very first release date in April 2009 and from last night to this night, the iPad does not charge when connected via the 10W adapter, tried new USB cable, different wall outlets with other things plugged in (and on)...now it will not connect to iTunes/iPhoto by cable or charge via cable. I'll try the wall charge while it is off, and hopefully I can keep some charge on it while a solution works out. Hoping to see an answer to your question as I'm in the same boat now.

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

I can not print web pages,print box does not appear . I can print web pages using IE

Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
Printer: Brothers HL-5140
Thank you,
Syd

First of all, update Firefox to 3.6.17 via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
To revert to Google as your preferred search engine, please do the following.
* In the location bar, type '''about:config''' and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''.
* Go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
Update via http://get.adobe.com/flashplayer/
Printing issues might be fixed by installing Java via http://www.java.com/en/
But if the problem persists, please post again.

Ryanair 'flights' dialog box does not load; all the rest works, and in Opera it works; can you help? it seems everything else works fine

Ryanair 'flights' dialog box does not load; I tried in other languages too, it is the same error; it works fine with opera browser in this very same computer I am writing in; please help, if you can; it worked up to two months ago, then I don't know, too long has past from last time I used ryanair, and the rest works all fine, it seems... thanks so much for your time,

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] 
 
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Combox box does not populuate for very first record creation in table

Similar Messages

Maybe you are looking for