Comcast dynamic IP address behavior

I have a Comcast dynamic IP address assigned to my Router/Modem at home. I understand that the IP address may change over time. Is there any chance that a different Comcast user/household will share that same IP at the same time? Asked a different way -- when I go to a website, my source IP is shown as my Comcast assigned public IP. Is it possible that another Comcast user would show the same source IP at the same time? Best,-Drew

drewyelle wrote:
In a typical corporate network with a firewall, all computers on that network can have a unique internal IP address. But all will share a single "global" public IP address when going out to the internet. This lets a company conserve thenumber of public IPs in use.
Yep.
Does Comcast ever make use of "global" addresses for home users? by region or otherwise?
I've never heard of it.

Similar Messages

How to set "Cc" field in Dynamic Email address in Receiver Mail adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards,
Ravi Siddam

Hi,
If you do not need mail package for other reasons, I suppose it is enough to provide a value in Dynamic Configuration for fields "THeaderTO" and "THeaderCC" and the select "Use Adapter-Specific Message Attributes" and "Variable Transport Binding" in receiver Mail Adapter.
see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm">SAP help</a> for more details.
Regards,
Daniele

How to set "Cc" field in Dynamic Email address in Receiver JDBC adapter

I have done the configuration for setting up the dynamic email address using the XSD provided by SAP in note no 748024. It is working fine.
Michal's blog Mail Adapter (XI) - how to implement dynamic mail address. was a gr8 help in doing this.
But there is no clue of setting up of "CC" in email.
There should be "CC" in email is our bussiness requirement.
Would appreciate your helps.
with regards
Ravi Siddam

HI,
See fragment from help,
Specifications for mail attributes:
○       Under From, specify the e-mail address from which the message is sent.
○       Under To, specify the e-mail address that will receive the message. If you enter more than one address, you must separate them with a semicolon.
If you have specified an IMAP server under URL, the message is saved in the specified folder but is not sent to the receiver specified under To.
○       Under Cc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are visible to the receiver.
○       Under Bcc, specify the other e-mail addresses to which the e-mail is to be sent.
These addresses are not visible to the receiver.
○       Enter the Subject of the e-mail message.
○       Specify whether you want to encode the content of the e-mail message. You have the following options:
■       None
■       Base64 (default value)
■       quoted-printable
Hope this helps.
Regards,
Akshay.
reward points if find useful.

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>Studentlastname</lastname>
            <firstname>Studentfirstname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Test mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
    <xs:annotation>
      <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:string" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
        <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
        <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
        <xs:element name="Content" minOccurs="0">
          <xs:annotation>
            <xs:documentation>any type</xs:documentation>
          </xs:annotation>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="encoding" type="xs:string"/>
    </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
    <xs:annotation>
      <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Server" type="xs:string"/>
        <xs:element name="Format" type="xs:string"/>
        <xs:element name="UseMailPackage" type="xs:boolean"/>
        <xs:element name="Encoding" type="xs:string"/>
        <xs:element name="Subject" type="xs:string" minOccurs="0"/>
        <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
        <xs:element name="To" type="xs:string" minOccurs="0"/>
        <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
    <xs:annotation>
      <xs:documentation>Customer List</xs:documentation>
    </xs:annotation>
    <xs:complexType>
      <xs:sequence>
        <xs:element name="Customername" type="xs:string"/>
        <xs:element name="Customerid" type="xs:string"/>
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
         <Student>
            <studentid>1</studentid>
            <lastname>abclname</lastname>
            <firstname>abcfname</firstname>
         </Student>
         <Mail>
            <From>[email protected]</From>
            <To>[email protected]</To>
            <Subject>Testing Mail adapter</Subject>
         </Mail>
      </ns1:studentlisttest>
   </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Subject>Testing Mail adapter</Subject>
               <From>[email protected]</From>
               <To>[email protected]</To>
          </ns2:Mail>
     </ns0:Message1>
     <ns0:Message2>
          <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
               <Customername>abclname</Customername>
               <Customerid>1</Customerid>
          </ns2:CustomerlistExternal>
     </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

Receiver Mail Adapter Error ( Dynamic mail address to be used)

Hi EveryBody,
I am getting an error in the RWB (Communication Channel Monitoring) as Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error: invalid XIMailAdapter channel 'a089879fd0b63a4b92ca72d4a4af2ec4'.Mail is not send to the receiver.I have tried using USE MAIL PACKAGE as base64 and NONE.
Can somebody help me out in the configuration.

Hi,
have u refered the below weblog of michal:
Mail Adapter (XI) - how to implement dynamic mail address
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Thnx
Chirag gohil.

Dynamic email address in MAIL adapter

Hi ALL,
Is there a way of sending dynamic email addresses in mail adapter?
Regards,
XIer

Xier,
Yes. You can do it. Using Mail adapter option with Use MailPackage option.
raj.

Error while using Mail Package for dynamic email address - XMLScanException

Hi All,
i am trying to implement File_to_Mail Scanrio. Here i am using mail package stuff to make use the dynamic mail Id's. i am following the blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address. i have finished all the settings as per the blog but it throwing the following error
failed to send mail: com.sap.aii.messaging.util.XMLScanException: expecting start tag: Mail, but found Mail at state 1
Please help me to resolve this error.
Thanks in advance
-Siva
Edited by: Siva Ram on Jan 18, 2008 7:43 AM
Edited by: Siva Ram on Jan 18, 2008 7:43 AM
Edited by: Siva Ram on Jan 18, 2008 7:44 AM
Edited by: Siva Ram on Jan 18, 2008 7:44 AM
Edited by: Siva Ram on Jan 21, 2008 5:59 AM

Hi Siva
check with these threads discuss the same XMLScanException
Mail adapter fails when using Mail Package Format
Error in E-mail Adapter - Message protocol XIALL
Mapping Error with mail package
Error in Mail Adapter
See the below links also
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Error in Mail Adapter
Mapping Error with mail package
Regards
Abhishek

How to change the dynamic IP address to Static IP Address in Solaris 10X86

Hi,
I have installed Solaris 10X86 in a VM.While installing Solaris I have enabled DHCP.So its created with dynamic IP Address.Now I want to change the dynamic IP address to static IP address.Please anyone can help me to sort out this problem.

Hi,
I have installed Solaris 10X86 in a VM.While installing Solaris I have enabled DHCP.So its created with dynamic IP Address.Now I want to change the dynamic IP address to static IP address.Please anyone can help me to sort out this problem.

How to configure dynamic email address for notification

All,
I have a problem in assigning dynamic email address for notification activity in a bpel process, I want to assign a user from a user-properties file. How do I achieve this. I tried using the users in System-jazn-data.xml file, but if i add a email attribute to the existing users it doesn't show up. I am sure there should be an easier way of using identity service and adding attributes to the jazn realm user, I might be missing something.
I cannot have it as part of the payload the only way is to use identity service.
Thanks,
Chitra

Hi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

How to deal with dynamic IP address changes

I have installed Fodero C3 and Oracle 10g successfully. Oracle 10g use web OEM console to manage database. However, my internet provider only provided me a dynamic IP address. When I installed Fedora C3, Linux server automatically picked a Hostname like " ip12-345-678-90.dc.dc.cox.net". After I created database, all database files also used this hostname. Then Oracle web OEM console worked fine. Due to the dynamic IP address assigned by ISP, their DHCP server changed the first part of IP address(ip12-345-678-90)frequently to another one. After IP address changed, I couldn't start up web OEM console and listener because they couldn't find correct hostname (IP address). I have talked to my ISP. It seems that it can not be solved. Anyone knows how to deal with this problem through 10g and OEM console themseleves. I also think about to configure Linux server to solve the problem. I really need your help. Thanks in advance

Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.

Optional DC based on dynamic IP address

Hi folks,
my question is really simple and the answer might be obvious to you but since I'm not and expert in Windows (and I'm asked to back my answer with examples) I would like to check it with you.
I have only found this thread similar in topic where the guy is putting a second DC with dynamic IP and nobody warns him from doing it, actually give him help.
http://social.technet.microsoft.com/Forums/en-US/5f0398de-d0cd-4a57-bc8b-a483a91ebd80/how-to-add-additional-domain-controller-to-a-primary-domain-controller-having-a-dynamic-ip-address?forum=winservermanager
As to my case, we have two DCs (on the same LAN) and recently a third one was added for redundancy reasons, reachable through VPN (setup by other devices).
I always apply the general rule SERVER => static IP address and this situation falls within it imo.
I should give management the answer on whether this is recommended/discouraged bringing examples of any hindrances/problems that in your opinion this could cause.
Thanks in advance, Alex

Hi Muhammad,
I totally back your point of view. Such request comes from management and they would like me to explain why such a server canNOT have a dynamic IP address. In particular would be great to know which other problems (beyond dns cache is a good one) we may
hit, I mean they propose to rely on another DHCP server where the MAC address can be tied to a specific MAC address.
I guess that such implementation is seldom done and hence we don't have case studies where they proved that using dynamic IP addresses is not recommended or bad.
Thanks again, Alex
Alex

Can we configure the dynamic IP address in receiver JDBC channel

Hello,
Can we configure the dynamic IP address in receiver JDBC communication channel at runtime.
Thanks,
Soorya.

No, that is not possible.
The simplest solution would be to define a service and communication channel for each server and then use the receiver determination to determine which service to send to.
The only other way would be to use a receiver java proxy where you would have to code in the JDBC request yourself.
Regards,
Yaghya

Block PING to Controller Dynamic IP Address

Dear Sir/Madam,
I have a problem that the built-in ACL in the Controller 4136 does not work on dynamic interface. I can't apply a ACL to block PING to the dynamic IP address successfully. However, I can use the ACL to block other IP addresses which are in the same subnet on the network.
I need to block Ping to the dynamic interface because I will have public Internet user to use a broadcast SSID attached to this dynamic interface with true IP. Thanks.

Thank for information.
My case is a pure layer 2 VLAN which is no default gateway or router. The Cisco Controller release note mentioned not support PING to dynamic interface, however, I can continuously ping it from Radio side.

Email notification from Dynamic 'From' address

Hi,
Can we send emails using Email activity from a dynamic 'From' address? i.e. based on value of a BPEL variable?
I have tried this but always taking from the default From account defined in the Workflow Notification Properties under SOA-Infra-> SOA Admin in Eneterprise Manager.
All receipients (To, cc, Bcc) are working fine as dynamic. but not this 'From'.
Please let me know if we can't send email from a dynamic From Address?
Regards,
Sam
Edited by: Sam on Mar 13, 2012 5:58 AM

Sam,
I don't think we can do that.
I have tried it in the latest version too, but there is no scope to send any email dynamically.
The only thing we can do is chande manually, else tweak the WebLogic portal Java Api and get it changed.
Later one is a bit complex.
Thanks,
TIrumala Dixit.

Email from flex using dynamic email address

I have an http service call that populates a datagrid. The user drags one or more items to a "favorites list". The user then emails this favorites list to himself. My ISP says they cannot handle dynamic email addresses which is apparently what I need to use. Any ideas or other ways to handle this? I am using PHP to handle the email function.

Mehabub Sheikh wrote:
We are using lotus notes for emailing.
Is it possible to configure APEX for sending email using Lotus Notes 8.5?Yes, inasmuch as I've worked on a project that did so. Their DBA just used the standard APEX mail config: +Configuring Email+
Notes didn't play as well with the APEX mail API as others: {thread:id=2379927}

Comcast dynamic IP address behavior

Similar Messages

Maybe you are looking for