Comm with psu using pda

Hi all,
I just wrote a simple read write program on my pc to communicate with the TTi programmable psu which worked without a problem. I then proceeded to download this program to my pda and hooked up with the psu but the program does not work.
Is there some major difference between the pc and the pda communicating abilities that i am not aware of. Is the software vxHPC compatible with labview?
If i have not provided enough info with regards to my question please let me know and as always any help on this problem will be greatly appreciated.
Cheers,
Lil

Maybe you used VISA. VISA is not available on PDA. For serial comms, you need to use serial compatibility vi's.
There are examples specific to PDA you can try.
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011

Similar Messages

Comm with rt system using two ethernet boards

I am using two ethernet ports in my host computer. One for LAN communications and the other as a link to my PXI RT system. I've not been able to establish comms with the RT system. Any suggestions?
Steve Hall
[email protected]

I found a cable causing the problem. With correct cable MAX recognized the remote PXI embedded controller and all is fine.
Steve Hall
[email protected]

Calculated formula for replacing a comma with a Semicolon in a text field

I need help replacing a comma with a Semicolon in a text field.
I have a field that has names separated by commas.
Ex: Dog, Cat, Bird, Horse, Eagle, Worm, Snake
I would like a calculated column that converts the field into: Dog; Cat; Bird; Horse; Eagle; Worm; Snake
I figured out the first three positions (Dog, Cat, Bird,) but I can't figure out the rest.
Using the formula below.
=REPLACE((REPLACE((REPLACE([Title],SEARCH(",",[Title]),"1"," ; ")),SEARCH(",",(REPLACE([Title],SEARCH(",",[Title]),"1"," ; "))),"1"," ; ")),SEARCH(",",(REPLACE((REPLACE([Title],SEARCH(",",[Title]),"1","
; ")),SEARCH(",",(REPLACE([Title],SEARCH(",",[Title]),"1"," ; "))),"1"," ; "))),"1"," ; ")
Please help

check the similar post
http://social.technet.microsoft.com/Forums/windowsserver/en-US/66e2ae2a-4da9-4c58-a8bb-cf46b1bf448f/calculated-column-to-replace-commas?forum=sharepointgenerallegacy

Time Zone Conversion with out using function and with out alter

Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.

Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE       DATE                              DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6)                      DEFAULT sysdate,
WITH_TZ     TIMESTAMP(6) WITH TIME ZONE       DEFAULT sysdate,
WITH_LZ     TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000

I have a kodak printer hero 5.1, it prints or scans 2 or 3 jobs then loses comms with mac although the wifi light is still on. I tried to uninstall software but when I go to printers folder "no such folder message" . Any advice appreciated.

I have a Kodak printer hero 5.1, it prints or scans 2 or 3 jobs then loses comms with mac although wifi light is still on. I have tried to remove printer by deleting in preferences but when i try to go to printer folder " no such folder " message appears. Any advice appreciated.

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

Error while doing commit with UnitOfWork

Hi all,
I get the following error while trying to do a commit with Unit of Work:
I'm trying to Insert a Row into the table here.
EXCEPTION DESCRIPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
INTERNAL EXCEPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
ERROR CODE: 0LOCAL EXCEPTION STACK:
EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
INTERNAL EXCEPTION: java.sql.SQLException: DSRA9350E: Operation Connection.commit is not allowed during a global transaction.
ERROR CODE: 0
     at oracle.toplink.exceptions.DatabaseException.sqlException(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.commitTransaction(Unknown Source)
     at oracle.toplink.publicinterface.Session.basicCommitTransaction(Unknown Source)
     at oracle.toplink.threetier.ClientSession.basicCommitTransaction(Unknown Source)
     at oracle.toplink.publicinterface.Session.commitTransaction(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitTransaction(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitToDatabase(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commitRootUnitOfWork(Unknown Source)
     at oracle.toplink.publicinterface.UnitOfWork.commit(Unknown Source)

Are you trying to make use of TopLink's JTS integration for the UnitOfWork?
How are you acquiring the UOW in code?
non-JTS, make sure to use session.acquireUnitOfWork()
for JTS, session.getActiveUnitOfWork() and never call uow.commit() since TXs are method based in an EJB.
Also, for JTS - ensure you tell TopLink's session you are using an external TX controller in the sessions.xml, just consult the examples that install with TopLink for a sessions.xml that makes use of external TXs.
Darren

Strange Behaviour: Inserting Rows with OrdVideoDomain using JDeveloper

Dear Sirs...
i created two tables each containing OrdVideoDomainField.
i use the same function to fill the rows with values. the code is like this:
ViewObject V=GetViewObject(V);
Row R=V.CreateRow();
byte b[]=new byte[10];
OrdVideoDomain O=new OrdVideoDomain(b);
R.setAttribute("f",O);
R.setAttribute("name",AnyName);
V.insertRow(R);
R=null;
GetTransaction.postChanges(); // gets the appmodule and then gets the transaction object within and finally posting the change
GetTransaction.commit();
When i use the function of the viewobject A, all the data is stored correctly when dealing with table A. But when dealing with table B, all the data are stored correctly but the OrdVideoDomain field is filled with null. i get no error at all.
i checked the names of the fields in the tables, and they are correct.
i tried to upload files into both tables and these are working perfectly fine.
i tried to get the data from both tables and they are working perfectly fine.
the problem is only when i store data programatically into the table b.
does any one have a similar problem?
how to solve it?
i am using ADF UIX in jdeveloper 10g 10.1.2 with oracle database 10g release 2 and both are under windows.
thanks for any help in advance
best regards

Sorry, i have found the problem, it is a programming error
best regards

Repalce comma with Space in Webi report.

Hi Experts,
My address Column in Webi report is showing data is like :
Address (this is the field coming for BW)
House No1,Flat J10,New Delhi,INDIA.
Can we replace Comma with the space so that the ablove data would be like :
House No1 Flat J10 New Delhi INDIA.
Thanks.

Hi Abdi
Use the formula
= Replace("House No1,Flat J10,New Delhi,INDIA";",";" ")
then you will get
House No1 Flat J10 New Delhi INDIA.
Use the object in place of Text
=Replace([Address];",";" ")
Regards,
Mahi

Replacing comma with space

Hi,
Note : I am using SAP 4.6
Task      : Replace Comma with space
Problem : Not able to replace comma with space
I have task where I have to write result file to application server, when I am writing string to application server it is separating by comma, for example if you take below statement it is dividing by space that means in first column PO and then ITEM etcu2026.
MOVE 'PO ITEM is not there in table EKPO' TO W_RECORD_OUT-ERROR_MSG.
so to resolve this situation I have used below code for now, I know I can use
REPLACE ... ALL ENTRIES but this statement is not working in SAP 4.6
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
REPLACE ',' WITH ' ' INTO W_RECORD_OUT-ERROR_MSG.
CONDENSE W_RECORD_OUT-ERROR_MSG.
appreciate if somebody can help me.
Thanks
sarath

Hi,
Please check the below code.
REPORT YSAT_TEST.
Data: Var1(40) type c value 'Test1,Test2,Test3,Test4'.
break-point.
REPLACE ',' WITH space INTO Var1.                   " It will replace only first occurrence
replace all occurrences of ',' in var1 with '   '.
CONDENSE Var1 no-gaps.
write: var1.

Wield char with the use of matnr

Hi All,
my requirement is like:
I need 1 selection option which seems like parameter type mara-matnr.
when I put any material with the using of "*", it sud be fetch all the material with combination.
I did the code for that but somtime it fails..
TABLES: rqm00.
TYPES : BEGIN OF tp_matnr,
          matnr       TYPE mara-matnr,
        END OF tp_matnr.
DATA: w_text TYPE string.
CONSTANTS: c_wild   TYPE c VALUE '*',
            c_per    TYPE c VALUE '%'.
DATA: t_matnr TYPE STANDARD TABLE OF tp_matnr,
      wa_matnr type tp_matnr.
SELECT-OPTIONS : s_matnr FOR   mara-matnr NO INTERVALS NO-EXTENSION.
IF s_matnr-LOW CA c_wild.
      W_TEXT = S_MATNR-LOW.
      REPLACE ALL OCCURRENCES OF c_wild IN s_matnr-LOW WITH c_per.
ENDIF.
SELECT matnr
         FROM mara
      INTO TABLE t_matnr
      WHERE matnr LIKE S_MATNR-LOW.
IF SY-SUBRC = 0.
loop at t_matnr into wa_matnr.
write: wa_matnr-matnr.
endloop.
ENDIF.
What should I do? what is the right solution which should not be fail in any condition.
Thanks & Regards,
Jaten Sangal
Edited by: Jaten.sangal on Nov 18, 2009 11:26 AM

Hi
I just Executed this Code and working Fine
TABLES: rqm00.
TYPES : BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
DATA: w_text TYPE string.
CONSTANTS: c_wild TYPE c VALUE '*',
c_per TYPE c VALUE '%'.
DATA: t_matnr TYPE STANDARD TABLE OF tp_matnr,
wa_matnr type tp_matnr.
parameters : s_matnr type mara-matnr. " Replace this Parameters and proceed further
*IF s_matnr-LOW CA c_wild.
*W_TEXT = S_MATNR-LOW.
REPLACE ALL OCCURRENCES OF c_wild IN s_matnr WITH c_per.
*ENDIF.
SELECT matnr
FROM mara
INTO TABLE t_matnr
WHERE matnr LIKE S_MATNR.
IF SY-SUBRC = 0.
loop at t_matnr into wa_matnr.
write:/ wa_matnr-matnr.
endloop.
ENDIF.
Did you try this one
Cheerz
Ram
Edited by: Ramchander Krishnamraju on Nov 18, 2009 11:41 AM

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

Adding data file with out using brtools /sapdba

Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.

why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan

Iphone 4 battery runs completely down with no use in an hour or two.

My Iphone 4 battery, out of the blue, started running completely down in a couple hours with no use. I would take it off the charger reading 100% and not do a thing, but the unit will get pretty warm and the battery drains. The phone is only 3 months old and two days ago I was getting a full day to a day and a half with my ususal usage. Anyone know what is causing this or a fix? I've tried shutting down and rebooting and for software updates? Any advice is appreciated.
Thanks, Josh

One thing to try is cleaning iPhone Dock Port with a clean dry toothbrush.
If still problem and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.
Another is to clean the dock port again with the toothbrush and a bit of Isopropyll Alcohol, especially clean the pins which are on top of the Dock Mid Rib.
Reset, hold both Home and Power buttons for about 10 seconds until the iPhone restarts itself, ignore the 'slide to power off' slider.
Restore Firmware, at end when iTunes asks, Restore as New, not from backup.

To save time, could I get away with just using ProRes Proxy?

Might be a dumb question. But please play along with me...
I've been battling with FCP-X since it first came out. Beach balls, crashes, failed auto saves, you name it. Sluggishness is my middle name. But I think it might be because I'm trying to force too much quality through my older, less powerful machines and my little firewire 400 hard drive. All three of my Mac are 3-4 years old, all are from the old "Core 2 Duo" era (not quad core processors), and are all maxed out at 4GB of RAM. While I've read that many people are having performance problems with FCP-X even on brand spankin' new suped-up Mac Pros with lots more horsepower than I'm running, I've long thought that my machines and their lack of power by today's standards may be at the heart of my sluggishness problem, especially given that most of the material I work with is shot in 1080 HD. (I've never actually tested it in FCP-X, but I'm assuming that things would speed along more like I've been used to in the past if I would just do everything in Standard Definition 480, but that ain't gonna happen.)
Like many, I shoot most everything in 1080 HD (usually 24p, sometimes 30), unless I'm occasionally shooting 720 HD at 60i for later slowing down to slo-mo.
Here's my question: Most everything I edit is for web delivery, and 99 percent of it is for my own use (not clients). Mostly podcast-like stuff, although occasionally I'll create something for my business website. Most of what I do is talking head type stuff, not a lot of motion (except for the 720/60i slo-mo stuff, which usually has some motion, which is why I shoot it at 60i for slowing down). Most of what I shoot is green screen talking heads, intended to be keyed in front of some innocuous background like some of the generators in FCP-X. I want it to look good. Even great. But given the limitations of power on my machines, I also don't want to invest an eternity in rendering and processing time. The work I'm doing with video just isn't that important. It's mostly for grins.
Until last night, I had been working exclusively in ProRes422 (aka "Optimized"). But last night I shot some footage and imported it into FCP-X, encoding it ONLY in ProRes Proxy. And frankly, I couldn't discern any difference. It looked every bit as good as the 422 stuff I'd shot before. There was absolutely no difference to my naked eye. That said, the footage I shot last night to test this out was not shot in front of the green screen (I'll test that out today or tonight), so maybe the Proxy footage won't key as well. (I've been stunned at how good the keyer is in FCP-X, but up to this point I've only been keying ProRes422 footage, not Proxy.) But really, based on just eyeballing the footage, I couldn't tell the difference between the Proxy footage and all the other footage I'd shot previously that had been imported and converted to "Optimized" ProRes422.
I'm not looking to deliver anything for broadcast television (if I were, I'd for sure use 422). I'm not doing any feature film type stuff. My video work consists mainly of stuff just for me, for my own personal amusement (and for the amusement of anyone who might watch it on the web). It's intended for YouTube, Vimeo, or occasionally (in smaller dimensions than 1920x1080) for deployment on my company website. Mostly, it's just me doing podcast-type stuff. Occasionally I'll shoot and edit something for church, or for friends. I like to think the production values of my stuff tend to be higher than, say, the footage Aunt Delores shot at Uncle Ralph's birthday party (okay, A LOT higher than that!). But my stuff isn't going to air on "Good Morning Flatbush" either (unless, on the off chance it should happen to go viral).
So let me make my question as clear as possible: Could I not get away with just using ProRes Proxy throughout my entire work flow, end to end, never switching over to ProRes 422 even when exporting? Honestly, it has taken hours just to render the keyed green screen footage on a 15 minute video, and just the other night, it took the better part of 4 hours (after it was already rendered) to export a 15 minute ProRes422 sequence to YouTube (and then the darn thing timed out, essentially wasting all my time). I'd rather just stay in Proxy the whole way through if doing so would streamline my workflow without compromising too much quality in the "look" of the video. Based on my very limited use of Proxy (just testing it out last night for the first time), I couldn't tell the difference. Maybe for web deployment, Proxy is all I really need.
Have any of you just stayed in Proxy the whole way through, never switching to 422 even when exporting? Might this be an acceptable work flow for some of us, especially those of us on older, less powerful machines? Is this a viable solution? Do any of you work this way? What's your level of satisfaction?
Thoughts?

A lot of what I'm shooting is being shot on a Canon XA-10. Some (and certainly all of the 720 footage, but some of the 1080) is shot on a 7D. And still more is shot on either an iPhone 4S, or even on a Flip Ultra (720p, 30fps).
Most is shot on the XA-10.
What I'm trying to avoid is the excessive render times (doesn't the ProRes 422 footage have to render as well?), and the ridiculously long times it takes to export. Would all that not be reduced significantly by sticking to Proxy the whole way? And what would the trade-off be? I mean, I honestly can't see any discernible difference. Maybe I will when I try to pull a decent key. (Haven't gotten that far yet in my Proxy experimentation.)
Of course, editing in Proxy and outputting using 422 requires that FCP-X encode to BOTH when importing, right? Doesn't that add yet another bit of time to the overall process?
I'm trying to streamline, and to reduce the overall amount of time I'm spending doing this stuff.

How to connect my ipad with mac using bluetooth?

how to connect my ipad with mac using bluetooth?

You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
iOS: Supported Bluetooth profiles

Comm with psu using pda

Similar Messages

Maybe you are looking for