Command line e-mail with Chinese Characters

We are writing a script that tells users that their password will expire
in 2 weeks and how to change it in various places like network,
GroupWise, PDA, conferencing system...
Problem is that we have Many Chinese so we want the e-mail to be in both
Chinese and English. We are using nail to format the e-mail but it is
always coming through with boxes for the Chinese characters. Any idea
one where the problem is occurring?
Thanks,
John

John,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Emails arriving with Chinese characters

    Hello,
    I have a couple outside contacts that send emails to my users regarding travel. Flight itineraries and the like. Those emails usually have a PDF attached. Not sure if that is relavent or not. The emails display in my users Outlook client (2010) with Chinese
    characters and some other odd characters (like a smiley face and hearts).
    The research I've done points at the senders email server having the root issue. Perhaps they just had a patch applied and it changed the locale or they may be using a Lotus Notes server.
    Lately, we've been getting more in from another outside source with the same problem, so I'm wondering if it isn't actually on my Exchange server (2007). Does anyone have an idea of what I could check to verify that this is or is not on my end of the pipe?
    TIA

    Hi,
    According to your description, I recommend you use pipeline tracing to troubleshoot the issue.
    Please refer to the following article to understand pipeline tracing:
    Using Pipeline Tracing to Diagnose Transport Agent Problems
    Pipeline tracing is a diagnostic feature in Microsoft Exchange Server 2007 that enables you to capture diagnostic information about e-mail messages as they encounter transport agents registered on Simple Mail Transfer Protocol (SMTP) events in the transport
    pipeline. Exchange captures verbose information about the changes that each transport agent applies to messages in the transport pipeline in message snapshot files. If transport rules are configured, Exchange Server also records any actions that each transport
    rule takes on these messages.
    How to Enable Pipeline Tracing
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Reply email with chinese characters become

    My colleagues sent an email with Chinese characters while I'm outside the office, so I replied it using my iPhone 4S with Chinese characters too.
    However, my colleagues (she is using Outlook) said the email that she received is not readable. All the Chinese characters become garbled.
    This issue also applied to iPad 2 because I again resent it using my iPad 2.
    Is there a way to overcome this issue? Otherwise, I cannot do my work when I'm away my desk.
    Pls help~

    If I create a new mail using my iPhone 4GS or iPad 2, I won't have the problem.
    This issue only applied when I reply or forward an email from my colleagues whoes emails contain Chinese characters. To avoid this issue, the only language I can use is typing English but some of my colleagues only understand Chinese.
    I believe this problem is an encolding issue too because this case also apply on the Mail in my MacBook Pro. But I can change my encoding to "Traditional Chinese - Big 5" on Mail in my MBP but iPhone & iPad don't have this function.
    The problem still there even I switched the OS language b/w English and Chinese.

  • LoadUserProfile() creates a profile with Chinese characters on a remote system

    Hi,
    I'm working on an application where LoadUserProfile() is being used to remotely load a user profile on a machine. The token being passed to LoadUserProfile() is obtained from LogonUser(). 
    When doing this only with a Domain Admin user which is added in Active Directory, it creates a profile with Chinese characters in the C:\Users\ folder of the remote machine. Note that this happens only when logging in for the first time with
    this Domain Admin account remotely on that machine.
         // code:
          PROFILEINFO pi;
          memset((void *) &pi, 0, sizeof(PROFILEINFO));
          pi.dwSize = sizeof(PROFILEINFO);
          pi.dwFlags = PI_NOUI;
          pi.lpUserName = (TCHAR *)strUser;   //strUser is the User name, and it shows correctly here when debugging
          if (LoadUserProfile(hToken, &pi))
    //It is actually successful, and comes here when debugging.
    Although the name shows up correctly when debugging (remotely), why is it creating a profile with Chinese characters on the remote machine? 
    TIA,
    Jy

    CreateProfile won't load the profile.  You need to use LoadUserProfile to load the profile, and you need to query for a roaming profile path to put in the lpProfileInfo parameter if you want to include that as well.  You need a token for a
    user to call LoadUserProfile, but not a profile handle.  LoadUserProfile will populate that for you before it returns if it was successful.  See this excerpt from
    https://msdn.microsoft.com/en-us/library/windows/desktop/bb762281%28v=vs.85%29.aspx:
    Upon successful return, the hProfile member
    of PROFILEINFO is
    a registry key handle opened to the root of the user's hive. It has been opened with full access (KEY_ALL_ACCESS). If a service that is impersonating a user needs to read or write to the user's registry file, use this handle instead of HKEY_CURRENT_USER.
    Do not close thehProfile handle.
    Instead, pass it to the UnloadUserProfile function.
    This function closes the handle. You should ensure that all handles to keys in the user's registry hive are closed. If you do not close all open registry handles, the user's profile fails to unload. For more information, see Registry
    Key Security and Access Rights and Registry
    Hives.
    WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

  • GUI Download Issue with Chinese characters

    Hello,
    Currently we are upgrading from 4.7 to ECC. I'm using GUI_DOWNLOAD
    function module to download the data from SAP to desktop. I do have an
    issue with Chinese characters while downloading the file from SAP to ECC.
    In 4.7 the Chinese characters are being downloaded (I haven't used any
    code page) perfectly, but where as in ECC the downloaded file has junk
    characters instead of Chinese.
    Is there any change in the GUI_UPLOAD FM.
    For your reference below is the code present in the program
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        EXPORTING
          FILENAME             = Z_FILENAME
    *****DCDK900543 - Begin of fixing for Unicode conversion ****
         FILETYPE             = 'WK1'
          FILETYPE             = 'ASC'
          WRITE_FIELD_SEPARATOR = ABAP_TRUE
    *****DCDK900543 - End of fixing for Unicode conversion ****
        CHANGING
          DATA_TAB             = I_TAB_TMP
        EXCEPTIONS
          FILE_WRITE_ERROR     = 1
          NO_BATCH             = 2
          INVALID_TYPE         = 3
          UNKNOWN_ERROR        = 4
          OTHERS               = 5.
    Regards,
    Bharath.

    Hi bharat,
    please check whether you ecc 6.0 is uni coded or not (as you upgraded).
    If it is not uni coded then you will not be able to print the Chinese characters.
    You can see whether it is uni coded or not by the following
    in your app toolbar under system click on status.
    There you can see whether your ecc6.0 is uni coded or not.
    Regards,
    koolspy.

  • How to use a select statement with chinese characters?

    I am currently developing a java servlet<using tomcat 4.x> which allows me to use select statement to retrieve results from the Microsoft SQL Server 2000 database. I am using a simple form to get the parameter for querying. The main problem i'm facing is that there are chinese information in the SQL database, but i can't retrieve it through the sql statement with the chinese characters input<thru the form with the help of NJ STAR>in the WHERE condition. When i execute the statement, it returns me no results even though the rows are present in the database.
    Does anyone have the solution to using chinese words in the WHERE clause of the select statement to retrieve results with columns which contains chinese characters? Please help me. Thanks everyone. :)
    PS: when i cut and paste those characters in the sql database and paste onto java.. it is ??? in questionmarks.. but when i paste them into excel 2000.. its shown as chinese chars again..
    please heelppp~~

    Greetings,
    PS: when i cut and paste those characters in thesql
    database and paste onto java.. it is ??? in
    questionmarks.. but when i paste them into excelThis is why the SELECT is not returning any results.
    You need to set the character encoding set on your
    statement and parameters for the characters to be
    properly translated. Refer to the charsetName
    parameter in the String class constructor in your API
    docs and also to
    $JDK_DOCS/guide/intl/encoding.doc.html in your JDK
    documentation.
    2000.. its shown as chinese chars again..Because Office programs are performing the same kind
    of character translation with the appropriate MS APIs.
    please heelppp~~Regards,
    Tony "Vee Schade" Cookis it possible for you to show me some coding examples? i don't really understand what is to be done in order to set the char set and what does it really do.. tried reading up but still dun understand.. :(
    pardon my shallow knowledge of java..
    ok..
    The thing is when i used an insert statement with chinese characters of GBK format hardcoded into the java servlet and then i use the insert statement to insert the chars into the database, it cannot be seen as a chinese word when i off the NJStar. and then it can be searched out with my current form of servlet.. below is my coding of the servlet..
    note: i've set my html file to charset = GBK
    //prototype of Search engine...
    //workable for GBK input and output...
    import java.io.*;
    import java.io.OutputStream;
    import java.io.IOException;
    import javax.servlet.http.*;
    import javax.servlet.ServletException;
    import java.util.*;
    import java.sql.*;
    import java.nio.charset.Charset;
    public class SearchBeta extends HttpServlet {
         private Vector musicDetails = new Vector();
         private String query = "";
         public void service (HttpServletRequest req, HttpServletResponse res) throws IOException, ServletException, UnsupportedEncodingException {
              query = req.getParameter ("T1");
              System.out.println("before:"+query);
              String type = req.getParameter ("D1");//type
              query = req.getParameter ("T1");
              //query = "������";
              System.out.println("after:"+query);
              getResults(type,query);
              System.out.println("locale = :"+req.getLocale());
              res.setContentType ("text/html;charset=GBK");
              PrintWriter out = res.getWriter();
              out.println("<html>");
              out.println("<head>");
              out.println("<body bgcolor = \"black\">");
              out.println("<font face = \"comic sans ms\" color=\"Cornsilk\">");
              if (query.length()==0)
                   out.println ("Please key in your search query.");
              else if (musicDetails.size()==0)
                   out.println ("Sorry, no results matching your search can be found.");
              else {
                   out.println("<center>");
                   out.println("<table cellspacing = \"50\">");
                   int i = 0;
                   //Display the details of the music
                   while (i<musicDetails.size()) {
                        Results details = (Results)musicDetails.get(i);
                        String dbArtist = "";
                        String dbAlbum = "";
                        String dbTitle = "";
                        String dbCompany = "";
                        dbAlbum = details.getAlbum();
                        dbTitle = details.getTitle();
                        dbCompany = details.getCompany();
                        dbArtist = details.getArtist();
                        try{
                             dbAlbum = new String(dbAlbum.getBytes("ISO-8859-1"),"GBK");
                             dbTitle = new String(dbTitle.getBytes("ISO-8859-1"),"GBK");
                             dbCompany = new String(dbCompany.getBytes("ISO-8859-1"),"GBK");
                             dbArtist = new String(dbArtist.getBytes("ISO-8859-1"),"GBK");//correct translation.
                        catch(UnsupportedEncodingException e){
                             System.out.print(e);
                             e.printStackTrace();
                        String dbImage_loc = details.getImage();
                        out.println("<tr>");
                             out.println("<td><table>");
                                  out.println("<img src=C:\\Program Files\\Apache Group\\Tomcat 4.1\\webapps\\examples\\ThumbNails\\"+dbImage_loc+">");
                             out.println("<tr>");
                                  out.println("<th><font color=\"violet\"> Artist: </font></th>");
                                  out.println("<td><font color=\"Cornsilk\">"+dbArtist+"</font></td>");
                             out.println("</tr>");
                             out.println("<tr>");
                                  out.println("<th><font color=\"violet\"> Title: </font></th>");
                                  out.println("<td><font color=\"Cornsilk\">"+dbTitle+"</font></td>");
                             out.println("</tr>");
                             out.println("<tr>");
                                  out.println("<th><font color=\"violet\"> Company: </font></th>");
                                  out.println("<td><font color=\"Cornsilk\">"+dbCompany+"</font></td>");
                             out.println("</tr>");
                             System.out.println("album: "+ dbAlbum);
                             out.println("<tr>");
                                  out.println("<th><font color=\"violet\"> Album: </font></th>");
                                  out.println("<td><font color=\"Cornsilk\">"+dbAlbum+"</font></td>");
                             out.println("</tr>");
                             System.out.println("company: "+ dbCompany);
                             out.println("</table></td>");
                        out.println("</tr>");
                        i++;
                   out.println("</table>");
                   out.println("</center>");
              out.println("</font>");
              out.println("</body>");
              out.println("</head>");
              out.println("</html>");
              out.close();
              //to remove all the elements from the Vector
              musicDetails.removeAllElements();
         //get Searched Music Details and store in Results object which is stored in musicDetails vector
         public void getResults (String type, String searchQuery) {
              try {
                   Class.forName ("com.microsoft.jdbc.sqlserver.SQLServerDriver");
                   Connection con = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=music","sa","kokkeng");
                   Statement stmt = con.createStatement();
                   String query = "SELECT * FROM MusicDetails WHERE "+type+" = '"+searchQuery+"'";
                   ResultSet rs = stmt.executeQuery(query);
                   while (rs.next()) {
                        String artist = rs.getString("Artist");
                        String title = rs.getString("Song");
                        String company = rs.getString("Company");
                        String album = rs.getString("Album");
                        String image_loc = rs.getString("Image");
                        Results details = new Results (artist,title,company,album,image_loc);
                        musicDetails.add(details);
                   stmt.close();
                   con.close();
              catch (Exception e) {
                   System.out.println(e.getMessage());
                   e.printStackTrace();
    with the above servlet i created, i can search out the data in the database which i've inserted through the insert statement. I still can't search for things i've keyed into the database directly using NJStar..
    thank you so much for helping.. really hope any one else who knows the answer to this will reply too... thank you all so much...
    -KK

  • Problems with Chinese characters

    I have a client experiencing 3 distinct problems with their Chinese-localized Fm files:
    The SimSun TTF font used in the source Fm files is "uninstalling" itself. This requires reinstallation of the font on a regular basis (every few days).
    The colons used in index markers in the Fm source files are not being parsed as Level1IX, Level2IX, etc. in the RoboHelp project. Instead, they are recognized as colons. In other words, the first level marker in Rh is XXXXXXXX:XXXXXXX:XXXXXXX. The same is true for the semicolons.
    The conversion settings for the Chinese project do not allow for mapping to individual CSS elements and classes. This means that all of the formatting is controlled via the supplemental CSS generated from the FrameMaker formatting. IOW, the formatting all uses the class="FM_ definitions.
    Has anyone had success working with Chinese characters in a FrameMaker to RoboHelp workflow (either linking or importing)?
    Anyone else seen any of these issues in Chinese or any other fonts?
    I'm thinking the first two issues are likely due to the TrueType font used, but can't find an Adobe OTF SimSans font to use as a replacement.
    However, the lack of mapping capability in the conversion process is a stumper...perhaps due to the double-byte font itself.
    Any thoughts or solutions are greatly appreciated by my client (whose deadline passed yesterday!)
    -Matt

    I dont think you can print chinese chars at the console on window
    to print the character codes to the console use someting like that
    char [] chars = request.getParameter("whatever").toCharArray()
    for(each chars){
    System.out.println((int)chars);
    then check if you got the corresponding chinese char

  • Working with Chinese characters: How to paste and modify them as sentences; not as individual images?

    Working with Chinese characters: How to paste and modify them as sentences; not as individual images?
    From 2004, this is so far the most detailed answer I could find: http://en.allexperts.com/q/Adobe-Illustrator-1027/FONTS-display-problem-Adobe.htm, but is this really still the most up-to date solution?
    Is it possible at all to work with Chinese characters, if I don't have the Chinese version of Illustrator? (http://www.proz.com/forum/dtp_desktop_publishing/221125-chinese_in_indesign.html)

    Thanks for your reply.
    I'm using Version 17.1.0 (64-bit) - basically CS6.
    Operating system is Windows 8.1. Installed is the simplied Chinese language package.
    I have received the text in a Word document. It contains mixed characters, something like this:
    教授资料
    学术背景:
      博士;曾于波恩大学(Rheinische Friedrich-Wilhelms-Universität Bonn)、台湾师范大学、
    I have tried to paste it in the two following ways:
    1) to create a text box and paste the text. The result is that some of the characters are not showed correctly.
    2) Paste it directly without any preparation. This result into a single "image" or group of images. I can cancel modify each character one at a time, or I can dissolve the group, but the result is the same.

  • CF10 HF8 monitor appears with chinese characters

    Help: What happend? After applying HF8 to CF10, the monitor app appears with chinese characters .... of course exactly when I needed it urgently
    where can I influence that? Note, the entire CF Admin is as usual in english.
    Thsnks
    Martin

    Have you tried doing it through a GUI? :-)
    Fire up the Gnome File Manager under start (the coffee cup),Places and then find the file and trash or delete it.
    Something a bit more onerous would be to copy all of the files except for the offending file someplace else and then go up to the parent directory and just do an rm -r sub-directory.
    alan

  • Problem with chinese characters while sending mail with .CSV attachment

    Hi,
    i am sendin .CSV file as an attachment with mail using "SO_DOCUMENT_SEND_API1" FM,
    whle opening the mail attachment the chinese characters are not displaying properly.
    currently i am using ECC 5.0
    can any body help in this regard.
    Thanks,
    Rahim

    Hi Kang Ring,
    please convert the content of the attachement into the binary format and then add it as a mail attachment.
    LOOP AT i_data ASSIGNING <wa_data>.
    if s_output is INITIAL.
    CONCATENATE <wa_data> cl_abap_char_utilities=>cr_lf into s_output.
    else.
    CONCATENATE s_output <wa_data> INTO s_output SEPARATED BY cl_abap_char_utilities=>cr_lf.
    endif.
    ENDLOOP.
    CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
    text = s_output
    IMPORTING
    buffer = x_output.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
    buffer = x_output
    TABLES
    binary_tab = imail_att.
         OR
    please use ABAP-Object classes like CL_BCS , CL_document_BCS.....
    please findthe below sample code.
      cl_bcs_convert=>string_to_solix(
              EXPORTING
                iv_string   = s_output
                iv_codepage = '4103'          "suitable for MS Excel, leave empty
                iv_add_bom  = 'X'               "for other doc types
              IMPORTING
                et_solix  = s_output_binary  "(of type solix_tab)
                ev_size   = size ).
    attachment->add_attachment(                       "attachment of type ref to cl_document_bcs
              i_attachment_type    = 'xls'                     
              i_attachment_subject = l_subject    
              i_attachment_size    = size
              i_att_content_hex    = s_output_binary ).
    you need to write the code for adding the receipents, subject and adding this "attachment " as an attachment to the mail.
    Hope this will helps to you....,
    thanks,
    Rahim.

  • Attach file to mail with "unusual" characters

    Hi
    I have made a procedure that can send mail with attached file/files. But when I attach a text file that contains characters like (Å, Ä or Ö) these characters gets like (A, A and ?) when I recieve the mail to my mail client. When I look at the file on the disk before I attach it the characters is OK but when I attach the file and mails it the characters get replaced. So why does the charaters get messed up when I attach the file to a mail??
    My procedure looks like this:
    procedure mail_files(from_name varchar2,
    to_name varchar2,
    subject varchar2,
    message varchar2,
    max_size number default 9999999999,
    filename1 varchar2 default null,
    filename2 varchar2 default null,
    filename3 varchar2 default null,
    debug number default 0) is
    mottagare VARCHAR2(2048) := to_name;
    v_smtp_server varchar2(32) := 'mail.telia.se';
    v_smtp_server_port number := 25;
    v_directory_name varchar2(100);
    v_file_name varchar2(100);
    v_line varchar2(1000);
    crlf varchar2(2) := chr(13) || chr(10);
    mesg varchar2(32767);
    conn UTL_SMTP.CONNECTION;
    type varchar2_table is table of varchar2(200) index by binary_integer;
    file_array varchar2_table;
    i binary_integer;
    v_file_handle utl_file.file_type;
    v_slash_pos number;
    mesg_len number;
    mesg_too_long exception;
    invalid_path exception;
    mesg_length_exceeded boolean := false;
    begin
    -- first load the three filenames into an array for easier handling later ...
    file_array(1) := filename1;
    file_array(2) := filename2;
    file_array(3) := filename3;
    -- Open the SMTP connection ...
    conn := utl_smtp.open_connection(v_smtp_server, v_smtp_server_port);
    -- Initial handshaking ...
    utl_smtp.helo(conn, v_smtp_server);
    utl_smtp.mail(conn, from_name);
    WHILE (mottagare IS NOT NULL) LOOP
    utl_smtp.rcpt(conn, get_element(mottagare));
    END LOOP;
    --utl_smtp.rcpt( conn, to_name );
    utl_smtp.open_data(conn);
    -- build the start of the mail message ...
    mesg := 'Date: ' || TO_CHAR(SYSDATE, 'dd Mon yy hh24:mi:ss') || crlf ||
    'From: ' || from_name || crlf || 'Subject: ' || subject || crlf ||
    'To: ' || to_name || crlf || 'Mime-Version: 1.0' || crlf ||
    'Content-Type: multipart/mixed; boundary="DMW.Boundary.605592468"' || crlf || '' || crlf ||
    'This is a Mime message, which your current mail reader may not' || crlf ||
    'understand. Parts of the message will appear as text. If the remainder' || crlf ||
    'appears as random characters in the message body, instead of as' || crlf ||
    'attachments, then you''ll have to extract these parts and decode them' || crlf ||
    'manually.' || crlf || '' || crlf ||
    '--DMW.Boundary.605592468' || crlf ||
    'Content-Type: text/html; charset=8859-1' || crlf ||
    'Content-Disposition: inline;' || crlf ||
    'Content-Transfer-Encoding: 8bit' || crlf || '' || crlf ||
    message || crlf;
    mesg_len := length(mesg);
    if mesg_len > max_size then
    mesg_length_exceeded := true;
    end if;
    utl_smtp.write_data(conn, mesg);
    --utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(mesg));
    -- Append the files ...
    for i in 1 .. 3 loop
    -- Exit if message length already exceeded ...
    exit when mesg_length_exceeded;
    -- If the filename has been supplied ...
    if file_array(i) is not null then
    begin
    -- locate the final '/' or '\' in the pathname ...
    v_slash_pos := instr(file_array(i), '/', -1);
    if v_slash_pos = 0 then
    v_slash_pos := instr(file_array(i), '\', -1);
    end if;
    -- separate the filename from the directory name ...
    v_directory_name := substr(file_array(i), 1, v_slash_pos - 1);
    v_file_name := substr(file_array(i), v_slash_pos + 1);
    -- open the file ...
    v_file_handle := utl_file.fopen(v_directory_name, v_file_name, 'r');
    -- generate the MIME boundary line ...
    mesg := crlf || '--DMW.Boundary.605592468' || crlf ||
    'Content-Type: application/octet-stream; name="' ||
    v_file_name || '"' || crlf ||
    'Content-Disposition: attachment; filename="' ||
    v_file_name || '"' || crlf ||
    'Content-Transfer-Encoding: 8bit' || crlf || crlf;
    mesg_len := mesg_len + length(mesg);
    utl_smtp.write_data(conn, mesg);
    -- and append the file contents to the end of the message ...
    loop
    utl_file.get_line(v_file_handle, v_line);
    if mesg_len + length(v_line) > max_size then
    mesg := '*** truncated ***' || crlf;
    utl_smtp.write_data(conn, mesg);
    mesg_length_exceeded := true;
    raise mesg_too_long;
    end if;
    mesg := v_line || crlf;
    utl_smtp.write_data(conn, mesg);
    mesg_len := mesg_len + length(mesg);
    end loop;
    exception
    when utl_file.invalid_path then
    -- All other exceptions are ignored ....
    when others then
    null;
    end;
    mesg := crlf;
    utl_smtp.write_data(conn, mesg);
    -- close the file ...
    utl_file.fclose(v_file_handle);
    end if;
    end loop;
    -- append the final boundary line ...
    mesg := crlf || '--DMW.Boundary.605592468--' || crlf;
    utl_smtp.write_data(conn, mesg);
    -- and close the SMTP connection ...
    utl_smtp.close_data(conn);
    utl_smtp.quit(conn);
    end;
    Any help is highly appreciated.
    Regards
    Nils

    Hi Madhu,
         Using the default modules PayloadSwapBean and MessageTransformBean you can able to send multiple attachments.
    swap.keyName  :payload-name or payload-description or content-type, content-description. swap.keyValue: If you have  a multiple attachments then give the multiple key value.
    Like you have payload name
      Attachment1, Attachment2 then
    swap.keyName  payload-name
    swap.keyValue  Attachment1, Attachment2
    Using the MessageTransformBean you can able to change the file name.
    PayloadSwapBean:
    [http://help.sap.com/saphelp_nw70/helpdata/EN/2e/bf37423cf7ab04e10000000a1550b0/content.htm]
    MessageTransformBean:
    [http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
    Regards,
    Prakasu

  • Discoverer Desktop 10g : Issue with Chinese Characters

    Hi ,
    Discoverer Desktop 10g client is having issue in displaying Chinese data. My report has chinese characters in it and the same does not get displayed properly when run from Discoverer desktop. However, when I export the report in html format and opened it in browser, it is displaying the chinese characters properly. Browser was set to Unicode(UTF-8) character set.
    I tried changing to different fonts in Discoverer Desktop, but couldn't get the chinese character issue resolved in Desktop.
    Could someone , please tell me how to fix this issue ?
    Please mail directly to [email protected]
    Thanks
    Venkatesh

    I am facing the same issue too. I think it is a problem with the fonts. Get back to you later if I find any solutions.

  • Can I open multiple tabs in Firefox when WINDOWS starts up? Command line limits to about 204 characters...

    I know how to configure Firefox so that it opens multiple tabs every time you open ''Firefox''. I want it to open multiple tabs when I start ''Windows''. Or in other words, I don't want to connect to multiple web pages every time I open a browser, just the first time I log on for the day.
    I tried appending the web sites in the command line of a Firefox shortcut in my Windows Startup folder. The problem is that in this approach, you're limited to as many URL's as you can type in about 204 characters ('C:\Program Files (x86)\Mozilla Firefox\firefox.exe' uses up 52 of the 256 characters available in a shortcut).
    Is there a way to open more tabbed web sites than that?
    What would be cool is if there was something like a FFstartup.ini file or something, where you could provide a list of websites as long as you want, and it would open them all. So, the command line would look like:
    'C:\Program Files (x86)\Mozilla Firefox\firefox.exe' 'C:\Program Files (x86)\Mozilla Firefox\FFstartup.ini'
    ...and the FFstartup.ini file would look like:
    [Startup]
    'http://www.yahoo.com'
    'http://www.google.com'
    'http://www.firefox.com'
    etc...
    If there's no current way to do this, how would I make this suggestion to be developed?
    Thank you!

    Use a .bat or .cmd file to start Firefox if you need more space than the target line in a shortcut allows.<br />
    Separate the URLs with spaces.
    start "" "C:\Program Files\Mozilla Firefox\firefox.exe" http://www.yahoo.com http://www.google.com http://www.firefox.com
    * https://developer.mozilla.org/en/Command_Line_Options

  • [internationalization] problems with Chinese characters

    Hi everybody.
    I'm working on a program and i'd like to translate it into several languages. Until now I've managed to launch my program in 3 languages : French, English and German. I do it by asking the user which language he'd like to select by means of a JComboBox. Then the right Locale is selected and the right text is called by the RessourceBundle and so on .... Actually I've encountered no problems with "latin lettered" languages.
    I also tried to introduce Chinese in my program and that's how problems come in. The way Chinese is introduced in the program is exactly the same that of French, English and German. The .properties file I use is MyRessourcesMainTitle_zh.properties and one line is stored in it: title = &#20013;&#25991;
    However when I run the program and selected Chinese as language an error pops up in the DOS console : "Exception in thread "AWT-EventQueue-0" java.util.MissingRessourceException : Can't find ressource for bundle java.util.PropertyRessourceBundle, key title".
    I would like to point out that I saved my *.properties in a former *.txt file encoded in Unicode. Saving it encoded either in Unicode big endian or in UTF8 ends with the same problem. However the program ran just fine when I encoded it in ANSI but it's worthless insofar as the Chinese characters are transformed into "?".
    Would anyone have an idea about how to implement sucessfully Chinese characters in my program ?

    I dont think you can print chinese chars at the console on window
    to print the character codes to the console use someting like that
    char [] chars = request.getParameter("whatever").toCharArray()
    for(each chars){
    System.out.println((int)chars);
    then check if you got the corresponding chinese char

  • Firefox has a hidden tab with Chinese characters.

    The Firefox block on the taskbar line had Chinese characters displaying the current location. I closed all of my tabs and then clicked to quit Firefox. I then got a dialog box stating that I had multiple tabs open with Save, Quite, Cancel as options. The Chinese site was some how operating on a hidden tab. I had visited only sites such as BBC, Google Search, some trusted weather sites and downloaded some PDF from sites the McAfee had flagged as Safe. Any ideas?

    If you see CJK (Chinese/Japanese) characters on the Firefox title bar or the Windows Taskbar then that can happen if Firefox switches to UTF-16 encoding for some reason.
    The "RealPlayer Browser Record Plugin" extension (Tools > Add-ons > Extensions) has been reported to cause that issue.
    Be sure not to get confused with the RealPlayer plugin (Tools > Add-ons > Plugins) that plays media files.
    The extension adds some extra features like saving media files.
    You can disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RealPlayer: Tools > Preferences > Download & Recording)
    See also [[Troubleshooting extensions and themes]]

Maybe you are looking for

  • Problem while sending mail

    The following code is not working,the mail is not getting posted to the receiver.Can sum1 plz help... DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.   DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.   DATA: objbin LIKE solisti1 OCCUR

  • Isght not recognized with ichat AV 3.1 (v417)

    HI there, My mom has an eMac with Tiger OS 10.4.3 and has ichat AV 3.1 (v417) We have used the ichat AV often before. However, now it is not showing any video icon and we are not able to use the isights. I went to iChat prefrences and under the video

  • Determine the source -- BufferedReader

    I have start Java programming and one of the function that I need to make is a read(), which accept PrintStream and BufferedReader. In this function, it supposes to determine whether the BufferedReader is from a keyboard (system.in) or a file. Now, I

  • Photos from Lightroom print too dark

    I have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what t

  • CS6 Encore Flash output is blank

    I'm at a loss here. I'm exporting a large project (lots of menus, clips, etc) via 1280x720 Flash. When I load the index.html, nothing comes up (just dark grey space). There are no error messages. I have tried it on multiple machines with multiple bro