Command necessary to activate the proxy

Good afternoon
What is the command necessary to activate the proxy from the console in solaris10? I am using the following command but not working
-- Patchsvr

about:config but you probably should be using the Tools > Options menu for most settings. Changing things in about:config without knowing what you're doing can really break Firefox and cause you to lose all your data.

Similar Messages

How to use runtime.exe to activate the native file coping commands

How to use runtime.exe to activate the native file coping commands.(It might include using process(), and such.. but how?

Why would you want to do this? It's harder than copying the file in Java (by reading the file and writing it to a new file) and you'll need to write new code each time you want to port your code to a new OS.

How to activate the Info object catalog in Business content

Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
Arunava

Hello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers)

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

Activate abap proxy withou java stack on ECC side

Hi gurus,
Can we activate abap proxy on ECC side if the ECC don't hava java stack? As you know , we need to create two jco RFC provider in Visual Administrator, but without installing java stack, we can't do that. Any ideas? Thanks in advance.

Thanks all.
Solved by using program id of XI system in the RFC of application system.
But we still face the issue in SPROXY. It gave the error "No connection to Integration Builder ".
Then I runned connection test, and found SPROX_CHECK_IFR_ADDRESS and SPROX_CHECK_HTTP_COMMUNICATION
are right, but SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are giving the error "Integration Builder data not understood". Any ideas?
Edited by: xinjiang li on Sep 10, 2010 6:40 PM

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

I just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

i just upgraded to iOS5. I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

Start here, change your country if necessary and go to manage your account and request another email.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

SvcUtil creates incorrect namespace in the proxy

I create the WCF proxy with the cmd:
svcutil.exe /wrapped /serializer:XmlSerializer GenericTicketConnector.wsdl /o:OTRS.cs /config:App.Config /n:*,OTRSClient.OTRSServiceReference
Contract GenericTicketConnector.wsdl you can see here:
https://raw.githubusercontent.com/OTRS/otrs/rel-3_3/development/webservices/GenericTicketConnector.wsdl
My WCF client code:
using (OTRSClient.OTRSServiceReference.GenericTicketConnector_InterfaceClient tst = new OTRSClient.OTRSServiceReference.GenericTicketConnector_InterfaceClient("GenericTicketConnector_endPoint"))
OTRSClient.OTRSServiceReference.OTRS_SessionCreate sc = new OTRSClient.OTRSServiceReference.OTRS_SessionCreate();
sc.ItemElementName = OTRSClient.OTRSServiceReference.ItemChoiceType8.UserLogin;
sc.Item = "soap";
sc.Password = "1234567";
OTRSClient.OTRSServiceReference.OTRS_SessionCreateResponse res = tst.SessionCreate(sc);
File.WriteAllText("SessionID.txt", res.SessionID);
SvcUtil created this proxy:
[System.ServiceModel.MessageBodyMemberAttribute(Name="SessionCreateResponse", Namespace="", Order=0)]
public OTRSClient.OTRSServiceReference.OTRS_SessionCreateResponse SessionCreateResponse1;
But response from server looks like this:
<soap:Envelope soap:encodingStyle="http://www.w3.org/2003/05/soap-encoding" xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:soapenc="http://www.w3.org/2003/05/soap-encoding" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<s:Header xmlns:s="http://www.w3.org/2003/05/soap-envelope"></s:Header>
<soap:Body>
<SessionCreateResponse xmlns="http://www.otrs.org/TicketConnector/">
<SessionID>r3oRuOPBXiYtOZCCKIL5ZNSCDCKS7lAt</SessionID>
</SessionCreateResponse>
</soap:Body>
</soap:Envelope>
Response in my WCF client's code was null.
I manually corrected the proxy like this:
[System.ServiceModel.MessageBodyMemberAttribute(Name="SessionCreateResponse", Namespace="http://www.otrs.org/TicketConnector/", Order=0)]
public OTRSClient.OTRSServiceReference.OTRS_SessionCreateResponse SessionCreateResponse1;
And the answer began to contain the required data (response is not null).
How to fix the parameters of the command line SvcUtil call? Or I must fix the WSDL file?
I need to make a proxy automatically with the correct namespace.

Hi Andrey Antipov,
Based on your description, it seems that you are using the XmlSerializer, please try to use the
DataContractSerializer to see if it can work.
Besides, please also try to use the "Add Servicexs Reference" to see if it can make a proxy automatically with the correct namespace.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
I had problems with RPC proxy, I was trying to setup cutover migration.
So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
But after this change my outlook was not working anymore
The settings before the change were:
Name Server CertPrincipalName TTL
EXCH
1
EXPR
1
WEB
1
So I set this back to the original (above) but this didn't helped...
Outlook 2013 and Exchange 2013
There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
Outlook is unable to connect to the proxy server.(Error Code 10)

Hi,
Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
If possible, please run the following command for double check:
Get-ExchangeCertificate | FL
For Autodiscover service, please run
Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
http://support2.microsoft.com/kb/940881/en-us
Regards,
Winnie Liang
TechNet Community Support

Error in Powerpoint 2011: "You don't have the permissions necessary to perform the operation"

We have a user with a new iMac running 10.7.2 that is having some strange problems with Powerpoint 2012 and who knows how many other programs. The issue is whenever these programs try to write to the user's personal network folder, which we keep on a DFS share. The error message only pops up when the user tries to save over something that already has that file name on the share. So she is always able to make file.pptx, but any subsequent "save" commands result in this error message: "You don't have the permissions necessary to perform the operation." Then, all she can do is save the file as newfile.pptx.
This doesn't happen in Word or any other files in the office suite. I've tried this both when connecting to the DFS share, and when using SMB to connect directly to the folder on the server, with no change in results. I've not tried removing/reinstalling the Office suite, because it's only powerpoint. I believe it must be something to do with her account's permissions in Active Directory, but when she uses this domain account on a Windows computer, there are no problems at all, of course.
There's a mere 3 google hits on that bolded error message, leaving me with very little to go on. Has anyone run into this before?

Hey,
I have Mac users using Office 2011 saving to CIFS shares having the exact same problem.
Like heiseheisepointed pointed out only Power Point seems to be affected. Word, Excel etc seem to work fine.
I have checked and reapplied the permissions to the share and it is not that, I believe it is something faulty in PowerPoint itself.
I also tried saving the files as ppt rather than pptx but you still get a permissions based error message.
Just wondering is eitherJeff or hbonath have any sucess in getting a fix for this?
Cheers
Genits

After load .dbc file to the MAX, How to get activate the CAN signals?

Actually, i am new to labview and have some basic concepts. I am working on the CAN signals. I want to get activate the necessary signals alone. I know how to load the .dbc file to MAX. But after loading the .DBC file to MAX, i dont know how to activate the wanted CAN signals alone. For example, if i need to activate and control the speed CAN signal alone. i am not able to activate it.
Can anyone explain how this can be done.

hi,
try to download the file from the applicarion server using the dataset operations. and store in the internal table
thanks

Where did the proxy icon go?

Hi All, New here.
My company just upgraded to CS6. My job requires frequent placing of images from Photoshop into InDesign. I used to heavily depend on the proxy icon to shorten this step.
For example, I would finish editing a photo, then save in Photoshop. The proxy icon would darken after file was saved. Then I would drag proxy icon into InDesign file, which would place the image into the INDD.
Now, there is no proxy icon after I save my Photoshop documents. I noticed that the proxy icon DOES appear when I first open a document, but it disappears if I save it.
- This happens with .jpg, .psd, etc. Not just one file type.
- It ONLY seems to happen in PS--not IND or AI.
This slows down my process considerably. I now must open a Finder window, navigate to the Photoshop document, and drag from there into INDD. Or I have to Command+D in InDesign and navigate to Photoshop document there.
If this is a setting issue, will someone please tell me where to turn my proxy icon visibility back on?
If this is something Adobe removed, PLEASE will you bring it back?
Please let me know if you need any clarification. Thanks in advance.
iMac (late 2012) OSX 10.8.4
Creative Suite 6
Deborah

Hi R_Kelly,
Here are the screenshots from yesterday.
Here is screenshot you requested.
Thank you!
D.

Running application behind the proxy

Hi,
I have developed one test SAPUI5 application and using Northwind OData service.
Application is working fine but when I try to run in my office network which is behind the proxy, application is giving "407,Proxy Authentication Required". Following is the web console log.
Yes this is the obvious behavior as I have to give my user name and password for accessing internet from my office network.
My question is how should I specify proxy user name and password in SAPUI5 application while accessing OData so that I can run it behind the proxy also.
/Products [HTTP/1.1 407 Proxy Authentication Required 88ms]
"2014-04-30 14:47:11 The following problem occurred: HTTP request failed407,Proxy Authentication Required,<HTML><HEAD>
<TITLE>Access Denied</TITLE>
</HEAD>
<BODY>

<big></big> 

<blockquote>
<TABLE border=0 cellPadding=1 width="80%">
<TR><TD>

<big>Access Denied (authentication_failed)</big>
 
 

</TD></TR>
<TR><TD>

Your credentials could not be authenticated: "Credentials are missing.". You will not be permitted access until your credentials can be verified.

</TD></TR>
<TR><TD>

This is typically caused by an incorrect username and/or password, but could also be caused by network problems.

</TD></TR>
<TR><TD>

 
For assistance, contact your network support team.

</TD></TR>
</TABLE>
</blockquote>

</BODY></HTML>
Regards,
Vikram

Have you configured the proxy settings in Eclipse? I believe the SimpleProxyServlet uses the Eclipse Authenticator, and you can configure the proxy username and password in Eclipse.
SAPUI5 SDK - Demo Kit
Internet Servers
TheSimpleProxyServletcan be configured for proxy requests to internet servers in the same way as for intranet servers. Additional proxy settings may be necessary.
As theSimpleProxyServletautomatically uses the proxy settings from your Eclipse this can be configured in Eclipse under Window Preferences , and select General Network Connections . Here you can specify the proxy entries and the proxy bypass.
For example, set Active Provider to Manual, Schema=HTTP, Host=proxy, Port=8080 under proxy entries and localhost, *.sap.corp as Host under proxy bypass.
Regards,
Jason

Command necessary to activate the proxy

Similar Messages

Maybe you are looking for