Command Prompt vs NetBeans : Threading

hello,
I have implemented a thread which continuously check the files added/ removed to/from a folder , and prints "Message" to console.At command prompt, this works very smoothly without consuming any system resources and with a great speed.
But, when I implement this with my main project in the NetBeans, Performance is worstly slowed down.
What may be the probable cause/causes? If you have any idea about threading, please guide me. Thanx.
Regards
Nikhil

i wouldn't be too concerned; you won'tactually
run
your app from netbeans.I would be concerned! The only way this willhappen
is if there is excessive use of resources. Theonly
way we will be able to help the OP is if he
posts
his
code.it'd expect it's a bug in netbeans.:-) I do so hope you are joking!well it's trapping his input obviously, and maybe it blocks it a little, or something, forcing the thread to slow down during it's writes. or perhaps it buffers the output and he only thinks it's running slowly, or something like that.
but yes, code is a good thing to see :)

Similar Messages

Error 5: Access is Denied While using OSCDIMG to create Winpe x86 ISO with Deployment Tools Command Prompt

Technician computer is Windows 7 HP x64.
Running latest version of WAIK.
Goal: To make a Winpe disc for each processor architecture (AMD64, x86, IA64) with an included Gimage.exe using this code for the default startnet.cmd file found in system32 directory of winpe boot.wim
wpeinit
if /i %PROCESSOR_ARCHITECTURE%==amd64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==ia64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==x86 (
cd x86
start gimagex.exe
These are the commands I have processed for the x86 variant:
copype x86 c:\pe\x86\
Dism /mount-wim /wimfile:C:\pe\x86\winpe.wim /index:1 /mountdir:C:\mount
**It is at this point I copy over my x86 folder, x64 folder, and overwrite the startnet.cmd file.
dism /unmount-wim /mountdir:C:\mount /commit
oscdimg -n bc:\pe\x86\etfsboot.com c:\pe\x86\iso c:\pe\x86.iso
^^It is at this command I receive this error:
ERROR: Could not delete existing file "c:\pe\x86\iso"
Error 5: Access is denied.
Please note that all commands before were hand-typed, no copy or pasting from any directory or .chm
One thread referred to some Application Management service, but I can report that there is no such service installed in my machine.
Thank You!
UPDATE:
I copied the winpe.wim file from the x86 root directory into the iso directory and renamed it to boot.wim Now, if I copy the contents to a flash drive and put it into a client
computer, it boots to the PE perfectly, script and all.
However, when trying to use the oscdimg command, I do get an .iso successfully, but when I burn it, I don't know what to do in the way of boot options, and if I keep defaults (imgburn)
it results in an un-bootable dvd.
Suggestions are greatly appreciated.

Don't copy and paste instead type manually it will work.
[email protected]
OMG! Yes, you are correct ... but I have no idea why! I retyped the command line:
oscdimg -n -be:\winpe_amd64\etfsboot.com e:\winpe_amd64\ISO e:\winpe_amd64\winpe_amd64.iso
into Notepad, and then pasted it into the Command Prompt, and it worked!
Perhaps there must be some hidden characters included when pasting directly, even though I first pasted the command line into Notepad, and then into Command Prompt
(C:\Program Files\Windows AIK\Tools\PETools>).
I had to retype the command line in Notepad before copying and pasting, before it would work.
Wow, thanks!
Cheers, Navy Flyer

Encountering a RunTime error when I try running from command prompt

When I try to load my class from the command prompt I get the error:
Exception in thread "main" java.lang.NoClassDefFoundError: MiniTriangle
Since this seems like a pretty basic error, I'm hoping there's a black and white solution to it. Unfortunatly I don't have the slightest idea what that might be.
Any help would be appreciated, thanks in advance!!!

I'm pretty new to this myself but have encountered this error before. I've found it happens when you try to run the programme and the class name isn't the same as the file name. So if you named the text file when you wrote the code MiniTriangle when you compile it you will get a file called MiniTriangle.class which is what you are trying to run. However if you inadvertently misspelled the class definition in the code and entered say
class MiniTringle {
you would get the error you are experiencing when you try to run MiniTriangle.class
Hope this helps

Test Execution hangs while executing a test from Command prompt option

I have done the following
1) Created a script Test driver
2) Added different scripts as Script->Properties->Assets to the driver script
3) Call each of this asset script from TestDriver using command getScript("<<ScrptName>>".run(1, true, true, true);
4) Now calling this TestDriver script from command prompt with command
e:\\OracleATS\\agent
runScript.bat E:\\INTEGRATION_SERVICES\\Identity_management\\Automation\\Scripts\\MasterScripts\\TestDriver
TestDriver.jwg
The script execution hangs at "Initializing VU 1 for Script TestDriver. After few mintues of seeing this message i get error "Execution Timed Out".
Do I need to keep openscript UI open for script execution from command line ?
Is there any way to increase this Execution Time out ? May be it is taking time to load the internal script assets. AS other scripts are running fine on the same machine from command prompt itself.
Complete error is as follows
C:\Documents and Settings\oracle>e:\\OracleATS\\agent\\runScript.bat E:\\INTEGRATION_SERVICES\\Identity_management\\Automation\\Scripts\\MasterScripts\\TestDriv
er\\TestDriver.jwg
Running "TestDriver" ...
Agent started. Available commands:
stop - Stop the virtual user after it finishes the current iteration.
abort - Abort the virtual user cleanly, before it finishes the current itera
tion.
exit - Terminate the process immediately
You may type the above commands at any time.
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.utilities.api.UtilitiesService"
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.browser.api.BrowserService"
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService"
12:17:53,465 INFO [1] Initialized script service "oracle.oats.scripting.modules.webdom.api.WebDomService"
12:17:53,856 INFO [1] Initialized script service "oracle.oats.scripting.modules.datatable.api.DataTableService"
12:17:53,856 INFO [1] Initializing VU 1 for script TestDriver
Execution Timed Out.

Hi e_raja_sekar,
You wrote:
public static void main(String args){should be
public static void main(String args[]){Granted, the below code was tested on Windows XP using J2SE SDK 1.4.1_02 (and not 1.2.2 like Sridhar is using), but when I compiled and executed this code:
public class BadMain {
public static void main(String args) {
System.out.println("Hello World");
}The output I got was:
Exception in thread "main" java.lang.NoSuchMethodError: mainSo I don't think this is Sridhar's problem (but I could be wrong) since he says that he gets no error message.
Cheers,
Avi.

Running a Program in JDeveloper using Command Prompt

Hi,
I downoladed Oracle JDeveloper 10g. I had written a simple java class called Echo. java. I want to run the file using command prompt. My JDK has the following path:
F:\Sowmya
My java file has the following path:
F:\Sowmya\jdev\mywork\1\1\src\pkg1
So, in order to compile the file, I gave the following command:
F:\Sowmya\jdk\bin>javac F:\Sowmya\jdev\mywork\1\1\src\pkg1\Echo.java
It worked and the Echo.class file was created.
But, when I tried to run the file using the following command,
F:\Sowmya\jdk\bin>java F:\Sowmya\jdev\mywork\1\1\src\pkg1\Echo
Iam getting the following error:
Exception in thread "main" java.lang.NOClassDefFoundError: F:\Sowmya\jdev\mywork\1\1\src\pkg1\Echo
This didnt work either:
F:\Sowmya\jdk\bin>java F:\Sowmya\jdev\mywork\1\1\classes\pkg1\Echo
Iam getting the same error.
Can any one please help me regarding this.
Thank you,
Sowmya.

Yes, my class contains a main. It runs if I click run in JDeveloper. But, there is no output displayed. The following is the code:
public class Echo {
public static void main (String[] args) {
for (String s: args) {
System.out.println(s);
}

How to run a java program in command prompt

hi i want to run a java program from in command prompt from another directory
i want to run a file named First in C:\Program Files\Java\jdk1.6.0_07\bin
so when i give the command
java "C:\Program Files\Java\jdk1.6.0_07\bin\First"
it doesnt works it shows
C:\>java "C:\Program Files\Java\jdk1.6.0_07\bin\First"
Exception in thread "main" java.lang.NoClassDefFoundError: C:\Program Files\Java
\jdk1/6/0_07\bin\First
Caused by: java.lang.ClassNotFoundException: C:\Program Files\Java\jdk1.6.0_07\b
in\First
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: C:\Program Files\Java\jdk1.6.0_07\bin\First. Pro
gram will exit.

but it prints
C:\>java -cp "C:\Program Files\Java\jdk1.6.0_07\bin\" First
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-client to select the "client" VM
-server to select the "server" VM
-hotspot is a synonym for the "client" VM [deprecated]
The default VM is client.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent library <libname>, e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming language agent, see java.lang.instrument
-splash:<imagepath>
show splash screen with specified image
C:\>

Ports not appearing in the command prompt

Hi all,
I have enabled the following ports in my windows 8 system using firewall. I opened the firewall.cpl and created rules both for inbound ports & outbound ports. The Opened ports are as below:-
443, 25, 587, 143, 993, 995, 80, 3478,5061,5223.
All the above ports are added in the firewall. But when I run the "netstat -an" command from the command prompt. The opened ports are not there.
Can you please guide me why this is happening. I am clueless.
Thanks for help.

The command will only specify the active connections, not the ones that are opened.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to use addKeyListener in a program running using command prompt

Does anyone have any idea how to add the addKeyListener to a program running using command prompt.
Let me explain how the program run.
The program is start and accept call from other program. But from time to time, I need to issue some command by pressing the keyboard, let say, ESC is closed the program, F1 is showing the stated. F2.... (This is all need to run in the command prompt windows)
My problem is this program does not have any gui interface, so how can it be added?
i do it this way
public void key(){
addKeyListener(this);
But it have compile error.
mainServerImpl.java:87: cannot resolve symbol
symbol : method addKeyListener (mainServerImpl)
location: class mainServerImpl
addKeyListener(this);
I did implement KeyListener. But just don't know how to solve this error.
can anyone tell me how to solve it or point me a source that can help.
Thank in advance!
Regards,
Tai Tan

Write your own Thread, to do this:
public class KeyThread extends Thread {
   public void run {
      while(true) {
         int i = System.in.read();
         if(i == 123) {
            break; // to stop the thread
// in your main:
Thread keyThread = new KeyThread();
keyThread.start(); // calls run() of the thread

Problem with executing java on command prompt

Hi my program uses java mySQL connector to connect to a local host. The program works fine when i run through netbeans. But when i run through command prompt it gives in this error message
java.lang.ClassNotFoundException:com.mysql.jdbc.Driver Can anyone help me to solve this problem

add mysql.jar file to ur classpath, it will work fine.

Win 2003 Sevver Command Prompt not working

Hi,
It seems somehow the command prompt are not working on my server and hence one of my software installation is failing on the server.
it seems the CLI commands work fine when the Command prompt is executed directly from the /system32 dir. But when we use it from Start>run>cmd, the commands don't respond.
For Example:
C:\>ping
'ping' is not recognized as an internal or external command,
operable program or batch file.
C:\>nslookup
'nslookup' is not recognized as an internal or external command,
operable program or batch file.
And when I execute it from the /system32 :
C:\WINDOWS\system32>ping
Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
   [-r count] [-s count] [[-j host-list] | [-k host-list]]
   [-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name
Options:
   -t Ping the specified host until stopped.
   To see statistics and continue - type Control-Break;
   To stop - type Control-C.
   -a Resolve addresses to hostnames.
   -n count Number of echo requests to send.
   -l size Send buffer size.
   -f Set Don't Fragment flag in packet (IPv4-only).
   -i TTL Time To Live.
   -v TOS Type Of Service (IPv4-only).
   -r count Record route for count hops (IPv4-only).
   -s count Timestamp for count hops (IPv4-only).
   -j host-list Loose source route along host-list (IPv4-only).
   -k host-list Strict source route along host-list (IPv4-only).
   -w timeout Timeout in milliseconds to wait for each reply.
   -R Trace round-trip path (IPv6-only).
   -S srcaddr Source address to use (IPv6-only).
   -4 Force using IPv4.
   -6 Force using IPv6.
C:\WINDOWS\system32>nslookup
Default Server: dns-blr2.cisco.com
Address: 72.163.128.140
Please check and suggest!

Hi Aryanadonis ,
Thanks for posting here
According what you mentioned, I thought system can’t located command programs path when you perform this command .
Seems that you can perform these command with assign path, what I thought is this issue occurred because wrong environment variable setting.
I noticed that you have posted the Environment Variable result here, I checked and highlight wrong values that could cause this issue. please correct it and try perform
command again.
C:\WINDOWS;
C:\WINDOWS\system32;
C:\WINDOWS\system32\\wbem;
C:\PROGRA~1\CSCOpx\objects\smarts\lib;
C:\PROGRA~1\CSCOpx\objects\smarts\bin;
C:\PROGRA~1\CSCOpx\campus\bin;
C:\PROGRA~1\CSCOpx\MDC\tomcat\bin;
C:\PROGRA~1\CSCOpx\MDC\Apache;
C:\PROGRA~1\CSCOpx\MDC\Apache\bin;
C:\PROGRA~1\CSCOpx\MDC\jre\bin;
C:\PROGRA~1\CSCOpx\MDC\bin;
C:\PROGRA~1\CSCOpx\lib\jre\bin\server;
C:\PROGRA~1\CSCOpx\objects\db\win32;
C:\PROGRA~1\CSCOpx\bin;
C:\WINDOWS\system32\\wbems\smarts\binPROGRA~1\CSCOpx\MDC\ApacheOGRA~1\CSCOpx\lib\jre\bin\serverCOpx\lib\jrebin\serveremRoot%\System32\Wbem;
C:\Other Programs\net snmp\bin
This article below introduce how to modify environment variables in windows XP , but you may also reference to it and modify environment variable on you windows 2003:
How To Manage Environment Variables in Windows XP
http://support.microsoft.com/kb/310519
Thanks.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to clear the screen in the command prompt?

Hello Everyone,
I was wondering how we can clear the screen in the command prompt in Java. I remember we can do this in C by writing system("cls");
What is the best IDE for writing Java programs. Is the NetBeans IDE good? Thank you very much.

I was wondering how we can clear the screen in the
command prompt in Java. I remember we can do this in
C by writing system("cls");I guess there's no Java way of doing that because it's a function of the shell you're calling. If you try to use Runtime.exec on cls, it starts yet another shell, clears that, and closes it again, so it has no effect on your output.
You could try using the '\b' backspace character, if that helps.
What is the best IDE for writing Java programs. Is
the NetBeans IDE good? Thank you very much.By the way you're asking this question, the answer will be almost certainly "none". If you want to, you can search this board for the few million times this question was asked before, pick all IDEs suggested there and use the one you're most comfortable with.

Aspnet_compiler: Command Prompt error

Hello
I am getting the following error when trying to compile my ASP.NET project from the Command Prompt:
error 1001: Unexpected parameter: 'Studio'.
The compiler on my hard drive is here:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319, although I do have another folder here:
C:\Windows\Microsoft.NET\Framework\v4.0.30319
There is an aspnet_compiler.exe in both of those 'framework' folders.
Having located the compiler in command prompt on that path above, I now need to compile my files (aspx.aspx.vb, and Web.config) in accordance with the guidelines here:
http://msdn.microsoft.com/en-us/library/ms229863.aspx
I create a targetDir on my PC as follows: C:\myForm, and type in the location of my project in Command Prompt. This is a
physical path so I use '-p' and I wish the file to be updateable so I use '-u'.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319>aspnet_compiler C:\Users\Steve\Documents\Visual Studio 2013\WebSites\WebSite10 -p -u C:\myForm
This 'Visual Studio 2013' looks suspicious because of the spaces but if I right-click on the folder containing the project itself and select properties, this is what the path looks like:
C:\Users\Steve\Documents\Visual Studio 2013\WebSites
What am I doing wrong, please?
Thank you.

Hi,
I'm not familiar with Aspnet_compiler.exe tool. However, I think the path must be in double quotes if you use "-p".
Like:
Aspnet_compiler -v /WebApplication1 -p "c:\Documents and Settings\Default\My Documents\MyWebApplications\WebApplication1" -keyfile "c:\Documents and Settings\Default\My Documents\Key.sn" -aptca c:\applicationTarget
What's more, it looks like you didn't post in a correct forum. You need to reopen a new thread in
asp.net forum because we can't help move this issue there.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Portuguese characters in Command Prompt

Hello.
I have a similar problem but in Portuguese.
I've written an application in LUA connecting to an Oracle 11gR1 database,
running on Windows Vista Business 32.
The database charset is WE8MSWIN1252.
I have a table in which there is a column that have a value of "Manuteção".
When I run a query to the database using SQLDeveloper it works fine.
When the connection is made using LUA it retrieves wrong values. Even
SQL*Plus (DOS) get the values in the wrong way ("ManutenþÒo").
I do not know where should I set up any session parameter to get the
queries working in the same way SQLDeveloper does.
I have read the articles on NLS_PARAMETERS ( FAQ etc ) but I didn't
find any recipe or method to correct the client behavior.
I would appreciate any help on this matter.
Thank you very much
Jayme Jeffman Filho

Your problem is quite different from the original question about length of Spanish characters in AL32UTF8, therefore, I have branched your question into a new thread.
Regarding SQL*Plus Command Prompt (DOS), you need to set NLS_LANG to the OEM code page as follows:
C:\>chcpThis will show:
Active code page: 437or
Active code page: 850Depending on the output, use the following:
C:\>set NLS_LANG=AMERICAN_AMERICA.US8PC437
C:\>sqlplusor
C:\>set NLS_LANG=AMERICAN_AMERICA.WE8PC850
C:\>sqlplusThis should solve the problem for SQL*Plus. Of course, you can use BRAZILIAN PORTUGUESE_BRAZIL in place of AMERICAN_AMERICA:
C:\>set NLS_LANG=BRAZILIAN PORTUGUESE_BRAZIL.WE8PC850
C:\>sqlplusRegarding the LUA application, is it a Command Prompt (character mode) application as well? Do the incorrect characters look the same as in SQL*Plus Command Prompt?
-- Sergiusz

JDBC Driver error when working in command prompt.

I have a swing program that connects to MySql Database. When run within the Netbeans IDE, there are no errors. But when I run through the command prompt, I get the User Interface screen but does not connect to the database. I have also added the "mysql-connector-java-5.1.6-bin.jar" file in the jdk folder.
The error I get is "com.mysql.jdbc.Driver" which is the driver I have been using in Netbeans. How do I get over this problem?

The error I get is "com.mysql.jdbc.Driver" which is the driver I have been using in Netbeans. How do I get over this problem?1. Fix your GUI so it reports the problem, rather than relying on command line output.
2. Fix your class path which doesn't have the driver jar.
3. There is a JDBC forum.

Displaying login sessions on workstations using Command Prompt

Hi there,
Anyone know of a command similar to wmic.exe /node:IP-or-HostName ComputerSystem Get UserName in a Command Prompt which displays remote login sessions on a workstation rather than the console login sessions that use local accounts set up
on workstations.
Thanks,
RocknRollTim
P.S. I was redirected by a couple of forum users off the Microsoft Community Forum.

Hi Ben Lavender,
Thank you for responding to my forum thread again and thank you for making the correction on the WMIC command, I tried both sets of commands for WMIC and found that the WMIC command in your previous post was invalid whereas the one you posted last was correct
and was showing results, however there a few questions I would like to ask with regards to the WMIC command you posted last. How far back does the command go? When there are no dates and times next to account entries, does this mean that users have never logged
on to that machine or does this mean that the remote system has never retained this information in it's registry? I remember doing an error check on the machine I tested this command on as it was having performance problems and was developing a bad sector
on the disk at the time, would this cause the information not to display as expected? Also I configure out the date and time entry for each account entry but what does the information after the decimal point mean? Does it represent milliseconds for the time
element? Lastly I tried running the psloggedon app from the psloggedon suite on my Windows 7 x64 machine and now when I come to run it, it appears for a split second and then disappears, the same also happens for all the other apps from the psloggedon suite
after agreeing to license agreement for each app. I decided to do some research to confirm what are the system requirements to run the apps from this suite and the website says that it's only compatible with systems that have Windows XP and higher and/or Windows
Server 2003 and higher which I thought should have worked, I then decided to run the apps as Run As Administrator and they did the same thing as before, I also changed the compatibility settings of each app to run as Windows XP Service Pack 3 but again they
all did the same thing as before, does this mean that the suite of apps aren't compatible with 64-bit systems and only work with 32-bit systems?
Your help would be much appreciated.
Kind regards,
RocknRollTim

Command Prompt vs NetBeans : Threading

Similar Messages

Maybe you are looking for