Command to generate code for I-phone application in SUP-DOEc

Hello Experts,
Please let me know the command to generate code for esdma to create iphone application using SUP-DOEc.
Thanks and Regards,
Suma

codegen <ESDMA directory>\META-INF\sup-db.xml -client -mbs -sqlite u2013oc -log:co -output <ESDMA directory>
Regards,
Siva.
Edited by: Siva Satya Prasad Yerra on Jun 20, 2011 1:33 PM

Similar Messages

Embed labview generated code with c++ gui application

Hey everyone ,
I am very new to labview and trying to learn it ... but before that i wanted to make sure a doubt which i have in my mind , the problem is that i have a realtime GUI application built on c++ widgets and i want to change the existing DSP block in this application with the code generated by using the LABVIEW , i am sorry that have very
less amount of knowledge regarding labview so i turn up with thread ... So can generate c++ code for the DSP blocks designed in labview ... if yes how and if not why . Any
sincere help will be appreciated . And I very much apologise for any mistakes in my question .
Thanks

Tonph wrote:
Thanks rolf, is it possible that i use labview to disign my DSP block only and the output be fed to my custom c++ blocks and also wxwidget GUI ... suggest some means thanks ...
Well, have you followed the link I gave in my post? You can download an evaluation version of the add-on and try it out in LabVIEW. It generates C code, not C++, but that should be no problem, since it is very easy to call C code from a C++ application. I can't vouch for the suitability of this add-on for you, nor do I know the exact price range so that are certainly things you have to do for your own.
As to nathans solution, that could work too. If your application is for Windows, or MacOS X, or Linux you can create a shared library from your LabVIEW code and call it as such from your C++ application.
Personally I would find it a rather roundabout way to include LabVIEW generated code in a wxWidget application. One of the strengths of LabVIEW is not only signal acquisition and analysis but also simple GUI design, at least as long as you are after a functional GUI, and not a very specific style of a GUI. So I would never even consider to do the GUI part with anything but LabVIEW if some other parts are already to be done in LabVIEW.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
james

Hello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France

[svn:fx-3.x] 9242: Fix generated code for IFlexModuleFactory. allowInsecureDomain.

Revision: 9242
Author:   [email protected]
Date:     2009-08-12 08:16:10 -0700 (Wed, 12 Aug 2009)
Log Message:
Fix generated code for IFlexModuleFactory.allowInsecureDomain.
Change Security.allowDomain() to Security.allowInsecureDomain().
QE notes: None.
Doc notes: None.
Bugs: SDK-22633
Reviewer: Alex
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22633
Modified Paths:
    flex/sdk/branches/3.x/modules/compiler/src/java/flex2/tools/PreLink.java

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

What is the best Voice recognison for calling phone application

What is the best Voice recognison for calling phone application in the market now, free or not ????
Do you have any sugesstion

In my Opinion.. Vlingo (Free) is the best voice rec phone dialer... It is the swiss army knofe of voice recognition for the iPhone.

Is there a pro code for a new imac and super drive?

Is there a pro code for a new imac and super drive?

Hi ..
No, there isn't but you might want to take a look at refurbished iMacs > Refurbished Mac Computers - Refurbished Notebooks & Desktop Computers - Apple Store (U.S.)
Refurbished products come with the same one year limited warranty as does a new product.

OWB Error while generating Code for a mapping

I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error
VLD-2357: Target Data File name not specified for file <target Flat file name>.
I am new to OWB so any help on the same will be greatly appreciated. How can I specify target Data File name in the mapping configuration under Flat file operators
Thanks
Anish

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

HT5047 I've just downloaded ver 7 operating software AND ENTERED A SECURE CODE FOR THE PHONE NOW I CAN"T USE IT TO OPEN A MESSAGE FROM FACE BOOK

I just downloaded 0s 7 ser a code for security and when i recieved a nessage from facebook and was asked to enter the code it would:nt work and finally locked my phone. Help!!

Reinstall Safari 5.1.1
If that doesn't help install the Mac OS X 10.6.8 Update Combo. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after installing software.

Error while generating code for deployment

I am getting the following error:
Error generating findTest1ByMarks(java.lang.Integer) query for Bean Test1(Abstract scheme name=Test1) Error=query cannot be pushed down
Query="select ..."
Could someone help me?
I am trying to generate code of Container Managed Entity Bean in WSAD 5.0.
Thanks

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

Code for the Planning Application. On Click....

Hey Guys,
I have been searching for that one file that holds the logic for "*redirecting to a particular URL, on clicking a Planning aaplication via the Workspace*". So far I have not struck gold.
Please help/suggest the file that could get me a break.
Thanks,
Sasi

It does.
I am trying to integrate IBM TAM with Hyperion, and at a point I am experienceing a wrong "redirection".
On analyzing, the root cause was found to be the URL generated during the click of the Planning App.
Hence updating the URL at the source would help resolve my issue.
Do let me know if you are aware of where exactly I can find the code for redirection.
Thanks,
Sasi

UML modeling for class diagrams, could not generate code for modified diagr

Hi,
I'm using Java studio Enterprise for creating class diagrams and generating code from the UML using round trip engineering. I'm able to create class diagrams and generate code from the diagram. I tried modifying java code for classes and saved it. Now if I try and modify the diagram its not updating the java code associated with it.
Please suggest the workaround or so.
Thanks
Sunita

Maybe the linkage between the source and model class element is broken. Try to expand the class element from the project tree to see if a source file artifact node (under the class that displays the pathname as the name of the node). If not, that's why. Then, the workaround is to manually add the pathname to the java source file. Here are the steps:
- expand the class in question
- select the source file artifact node
- from the properties window on the right side of the ide, enter the exact pathname to the java source file and press the Enter
It should work now.

Beginner:an issue of generating code for an entity service

Hi All,
I have downloaded Sap Netweaver of sneak preview version which contains netweaver studio 7.0.07. And my jdk version is 1.4.09.
I created a CAF project and added an entity service named Person(just by clicking mouse,not did anything else).But when I tried to generate code,the compiler told me "The type abstractStringbuilder is not visible" and thus it caused the failure of building the project.I have googled this issue and found that this is a existing bug in eclipse.
Now here is the question: will it take effect if I upgrade my jdk to 1.5? Or can anyone give me any suggestions?
Thank you very much.
Message was edited by: Yuhui Liu
Message was edited by: Yuhui Liu

Hi,
I suspect that you are using Java5 sinse the AbstractStringBulder is not present in 1.4.
Please check the Java version used by the IDE by opening "Help -> About.. -> Configuration Details".
Java 5 is not supported by NetWeaver 7.
Anyway, an upgrade to Java 5 won't solve the issue.
Best Regards,
Tsvetan

What are the compiler generated codes for objective-c?

After the compilation, the code for c/c++ is known as "object code" i.e. ".obj" file, and the binary executable file is ".exe" .
Similarly for java the compiled code is known as ".class" file.
In case of Objective-c what is the output of Compiler and what is the Executable file?

Strictly speaking, .obj and .exe refer only to the output of the compiler and linker for a Windows system (or cross compiler). For *nix compliant systems the output of the compiler is usually given a .o suffix and the executable produced after linking is named whatever you choose; but usually with no suffix at all.
Also, technically speaking, Java .class fiels don't fit neatly into this paradigm. The output of a Java compiler isn't object code, per se; it's optimized byte-code that can be run by the JRE.

Generated Code for Button Bar - Not Working

Hi all,
I'm working with LightSwitch 2013 (Visual Studio 2013 Update 4), and I noticed that when I view my HTML5 client in Internet Explorer 11 and switch between tabs (in the HTML5 client), the buttons become barely visible (like they were disabled, but they're
still enabled). Is there a quick fix for this, like regenerating the javascript that was generated to do this?
Thanks,
Gareth
Edit: Here's a picture of what I mean. The button looks disabled, but is actually enabled. Any buttons that are disabled just show up as even less visible. Also, if I switch between tabs enough times, it'll fix the issue and look enabled again. Any advice
would be greatly appreciated. Thanks!

Have you added the button to the command bar for each tab or only the first tab?
If you want 'Add OS' available in more than one tab then you need to add buttons to all relevant tabs, but wire up to the same command and event handler in code behind.
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer.

Command to generate code for I-phone application in SUP-DOEc

Similar Messages

Maybe you are looking for