Comments restricted to 25 Characters in ALV grid.
While entering comments in ALV grid it was not allowing to enter more then 25 characters but the comments we select from the dropdown are of more then 25 charcters.
Please advise how i can enter more then 25 char for comments.
Thank you
PVK
Hi,
Check this link
[REUSE_ALV_GRID_DISPLAY maximum length;
Regards,
Surinder
Similar Messages
-
Requirement is to print more than 60 characters after ALV grid display
Hi Consultants,
Using 'REUSE_ALV_COMMENTARY_WRITE' , i have tried to display some text at end of page event, but ot is only displaying upto 60 characters, because SLIS is suporting oly 60 characters.
But my requirement is to print the line of text , i am getting the text through container.
suggest me the way to do.
Thanks in advance.
MadhanThere are a few possible ways ... here's one....
First of all, you cannot load more than 60 characters into a field at a time. So, if you create two info objects, one as a key and the other as text, you can load multiple lines.
For example, in Quality Notifications, there are Memo fields that can go on ... and on ... and on. What I do in these cases is add two characteristics to my data target called ZCOUNT and ZMEMO. ZCOUNT is the number of 60 character segments I will need to grab and ZMEMO is filled with each 60 character length of the memo field.
If you receive a 300 character field, then you break it up into 5 ZCOUNT's and create 4 additional, identical records with the Memo Field changed for each 60 characters of length.
It gets a bit trickier if you have multiple 60+ character lengths, however, if you know you will always have 75 characters, then it's easier to use two info objects ... 60 + 15 characters each.
Good Luck,
Brian -
I am using KWMENG data element in my ALV grid which is a quantity field. In normal dialog programming this field does not allows entering characters in editable cells. But in ALV grid I am not able to restrict it from entering characters.
Eg: In VA01 if we try to enter any character "ABC...Z" then it wouldn't be typed in the screen. But when using the same data element in ALV grid iot allows to enter alphanumeric values. Since it's a quantity field so character value gives a short dump. I know I can restrict the dump by using "NA" in comparing string but I want to knw is there a way by which I restrict character field entry in alv grid, the same way this field works in VA01. I checked with a simple dialog prog and in that also it doesn not allows character typing in editable fields.simple solution
mention the ref_fieldname and ref_tablename in the fieldcatalog for that column.
ex:
fieldcat-ref_fieldname = 'KWMENG'.
fieldcat-ref_tablename = 'VBAP'. -
Hi all F4 in alv grid with restricted value -- no solution from forum
hi all
i have developed report using alv grid using FM (important).
i have a field xyz which is input/output enabled in alv grid output. this field is attached with f4 help.
my requirement is to get or read the row in alv grid when user press f4 on that field so that restricted value should come in f4 help i.e. i have to read current line when user presses f4 i.e. the single line data in alv grid.
so how to get or read the current row when user press f4 i.e user will choose any row in alv grid and this output is on alv grid and there are multiple records.
or in other word is it possible to read current row in alv grid when user presses F4, if yes how???.
i hope u understood the query.Hai,
Check the code it may help u.
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
check this also.
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
regards.
sowjanya.b. -
Display 80 characters of PO text in ALV grid column?
Hi Guys,
I just want to display only 80 characters of PO Header text in the ALV grid column and the rest should appear when we move the Mouse on to the each ALV grid'd POtext column. So how is it possible 1st tell me how to display 80 characters of PO text.?
in ME23n u can see the PO header text.
Thanks ,
Gopi.Hi Gopi,
Are you displaying ALV in your custom report and you want to show just 80 char in output?
If this is yes:
You can set ALV column width as 80 CHAR while building field catalog.
Column cell will have complete text but when ALV appears it will first show first 80 char.
thnx,
ags. -
How to Restrict the values of Field TASKTYPE on a ALV Grid.?
Hi;
Let me explain my problem. I have report written by another abap developer who has gone now.
On the ALV Grid there is a field called "Activity Process". By F1 F9 I can read that field depends on table TCATX_TASKTYPES and field TASKTYPE . From se11 I can see that there is no search help related with the field.
When the user press F4 all the data in the table is listed . The user want to filter some of the listed data according to same logic .
When I debug the code after F4 on the field I found that the system finds Search Help: TCATX_TASKTYPES of type 'CT'. But unfortunately SE11 says that there in no search help such as TCATX_TASKTYPES.
The previous abap developer used BADI NETW_USER_FIELDS_F4 AT_F4 with class ZCL_IM_NETW_USER_FIELDS_F4 and interface IF_EX_NETW_USER_FIELDS_F4 for the transaction cj20n to filter the same field but this is not triggered by the F4 on the ALV Grid.
What can I do ?
Would you please help me ?I know i can do this using ADF Business Components as the business service but the problem is that the initial value for that attribute will be changed depending on the screen ... ill give u a simple example : lets say that I have employee table ( which include dept column) and under that table I have a table called "Emp_dept_movements" now in the main ADF page "employee entry" I have two blocks Employee data ( master view) employee dept data ( detail view ) now when the user press the create-insert button on the employee dept view the system should copy the dept no from the employee view to the dept no on the emp_dept_movements view... and the "Emp_dept_movements" will be used in another screen called " employee departement movements" without any initial value for the DeptNo
I dont want to create more than one view and cant set the initial value for that attribute in the view , Can this be done through the UI by adding set action listener on that button and specifying from ( binding master_view.dept ) - to (binding of detail_view.dept) ..
hope that am clear this time,
Edited by: Delta on Jul 5, 2010 11:21 PM -
How to Expand ALV Grid Total Width
I have to display 1476 characters in an ALV grid and then the users will use what they need when creating a layout.
Problem is ALV stops after displaying 1375 (or so) characters) - any parm or action to do this (maybe in the catalog setup sent to the program? Thanks!Hi Scott
This may be a restriction ALV Grid puts. My recommendation will be that, split some fields and generate more than one rows with the same key (you should then add a new key field which will hold line numbers specific to one definite key). When you sort with ALV Grid's sort option the keys will vertically merged (if you do not turn off this feature via layout or field catalog settings). I know this is not so pretty but ALV is not intended to show that kind of stuff.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a> -
How to display summary details at then end of a alv grid?
Hi.
i have a ALV grid with 4 columns.
also i need to print summary details at the end of the grid..
eg..
Total material cost 15.111
total labor cost 5.4444
total material burden 267.88
toal labor burden 253.66
How do i prinbt these details at then eend of a grid?/Hi
Populate event END_OF_LIST into IT_EVENTS tab and use in the fun module
see the doc for population of different events to display the totals after grid
REUSE_ALV_EVENTS_GET
Description
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1. Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
all fields in this structure are to be output
the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
There is a field in the internal output table which contains the associated unit.
There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
appropriate decimal places display for the unit
an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
key (key column)
value set: SPACE, 'X' 'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
no_out (field in field list)
value set: SPACE, 'X' 'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
tech (technical field)
value set: SPACE, 'X' 'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
C: Color (coding must begin with C)
x: color number
y: bold
z: inverse
hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
do_sum (sum over column)
value set: SPACE, 'X' 'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
no_sum (sums forbidden)
value set: SPACE, 'X' 'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
input (column ready for input)
Function not available
Format column contents
icon
value set: SPACE, 'X' 'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
symbol
value set: SPACE, 'X' 'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
no_sign (no +/- sign) Only relevant for value fields
value set: SPACE, 'X' 'X' = value output without +/ sign
no_zero (suppress zeros) Only relevant for value fields
value set: SPACE, 'X' 'X' = suppress zeros
edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
The system contains the Report/Report interface (function group RSTI, table TRSTI)
Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2. Default
The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
fieldname
ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
fieldname
outputlen
datatype
seltext_s
seltext_m
seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes.
Reward points for useful Answers
Regards
Anji -
Scroll text in ALV column using OO ALV grid
Hi All,
I have displayed ALV grid on the screen which has four columns. One of the columns is a text field with text255 domain. This Column is also editable. I have following problem and need help;
The column for some reason displays only 130 chars. I tried to set the output length in field cat to 255 still no difference. My custom container width is equivalent to max screen width of 255.
I also tried to crunch the other three columns to display as much characters as needed so that I am left with enough space for the last column which is comments but still it displays on 130 characters. And thoughts on why this is happening.
Thanks,
YogeetaHi,
The ALV will only let you show 130 characters. You could use 2 columns to display the text.
Martin -
EDIT limit of a column in ALV grid
I want to have an editable column in my ALV grid program.
i am using below code while creating field catalog.
gwa_fieldcat-tabname = text-02. "'GIT_BOM_REP'.
gwa_fieldcat-fieldname = COMMENT. "'Comment'.
gwa_fieldcat-seltext_l = text-058. "'Comment'.
gwa_fieldcat-edit = gc_x.
APPEND gwa_fieldcat TO git_fieldcat.
CLEAR gwa_fieldcat.
I am able to write in the output, but the problem is i can write only upto 10 characters.
Field length for this editable column is 200 and type is C.
Please suggest.
Thanks in Advance,
James.Thanks for your reply.....
I am using this code also:
*Layout to set width.
gwa_layout-colwidth_optimize = gc_x.
gwa_layout-box_fieldname = 'BOX'.
gwa_layout-box_tabname = 'GIT_BOM_REP'.
GIT_BOM_REP-COMMENT length is 200 and typ is C.
this is the 20th column in my ALV report. and i am using REUSE_ALV_GRID_DISPLAY FM.
Regards,
James -
Modifying single cell in ALV Grid via OO
Hi All,
Got a problem I hope someone can assist me with. I have a custom program generating an editable ALV grid. The users want to update a single cell in a row with value from a custom drop down. I've got the dropdown working, but I can't work out how to get the value back into the field. My attempts result in a 'GETWA_NOT_ASSIGNED' short dump.
I'm using the CL_GUI_ALV_GRID->get_selected_cells_id method to get the reference for the field to be modified, but I don't know where to go from here.
Any thoughts would be greatly appreciated. Btw, my knowledge of OO is passable, but not great, so any explanations of what the code is doing in a proposed solution would be greatly appreciated.
points will be rewarded.
Cheers,
StephenHello Stephen
Since your dropdown list restrict the already allowed values there should be no special need to validate the selected values.
Simply "grab" the data from the editable ALV into your internal itab in the ABAP report.
I have copied sample report BCALV_EDIT_07 into ZUS_SDN_BCALV_EDIT_07 and modified the report to show how to retrieve the dropdown values (which is simple). Please note that I added the GUI-function 'SAVE' to the GUI-status MAIN100.
* MODULE PAI INPUT *
MODULE pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
"$TMP
g_grid->check_changed_data( ). " retrieve changes from editable grid
CASE save_ok.
WHEN 'EXIT'.
PERFORM exit_program.
"$TMP
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
* do nothing
ENDCASE.
ENDMODULE. "pai INPUT
*& Form SAVE_DATA
* text
FORM save_data. "$TMP
* define local data
data: ls_fcat type lvc_s_fcat,
lt_fcat type lvc_t_fcat.
lt_fcat = gt_fieldcat.
ls_fcat-edit = ' '.
modify lt_fcat from ls_fcat
TRANSPORTING edit
where ( edit = 'X' ). " display ALV should be not editable
" Simulate saving of data
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'Display modified list data'
* I_GRID_SETTINGS =
* IS_LAYOUT_LVC =
IT_FIELDCAT_LVC = lt_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS_LVC =
* IT_SORT_LVC =
* IT_FILTER_LVC =
* IT_HYPERLINK =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT_LVC =
* IS_REPREP_ID_LVC =
I_SCREEN_START_COLUMN = 5
I_SCREEN_START_LINE = 5
I_SCREEN_END_COLUMN = 120
I_SCREEN_END_LINE = 20
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IT_EXCEPT_QINFO_LVC =
* IR_SALV_FULLSCREEN_ADAPTER =
TABLES
t_outtab = gt_outtab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "SAVE_DATA
And here is the entire coding: In order to find the modified parts of the coding simply search for $TMP.
PROGRAM zus_sdn_bcalv_edit_07.
* Purpose:
* ~~~~~~~~
* This example shows how to define dropdown listboxes for
* particular cells of your output table.
* To check program behavior
* ~~~~~~~~~~~~~~~~~~~~~~~~~
* Conceive that customers are only allowed to smoke in the
* first class. For this reason, if the customer is a smoker
* only the first class (F) can be chosen in column 'CLASS',
* otherwise all classes.
* Essential steps (search for '§')
* ~~~~~~~~~~~~~~~
* 1.Define an extra field in your output table
* 2.Define a dropdown table and pass it to ALV.
* 3.Set your dropdown field editable and assign the fieldname of the
* corresponding additional field to DRDN_FIELD of the fieldcatalog.
* 4.Set the handle of your additional field of your output
* table according to the listbox that shall be displayed.
DATA: ok_code LIKE sy-ucomm,
save_ok LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
g_grid TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
gt_fieldcat TYPE lvc_t_fcat,
gs_layout TYPE lvc_s_layo,
g_max TYPE i VALUE 100.
*§1.Define an extra field in your output table
* for each column where you want to use drop down listboxes.
* (One additional field refers to cells of one column).
DATA: BEGIN OF gt_outtab OCCURS 0.
INCLUDE STRUCTURE sbook.
DATA: drop_down_handle TYPE int4.
DATA: END OF gt_outtab.
* MAIN *
END-OF-SELECTION.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
PERFORM create_and_init_alv CHANGING gt_outtab[]
gt_fieldcat.
ENDIF.
ENDMODULE. "pbo OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
"$TMP
g_grid->check_changed_data( ). " retrieve changes from editable grid
CASE save_ok.
WHEN 'EXIT'.
PERFORM exit_program.
"$TMP
WHEN 'SAVE'.
PERFORM save_data.
WHEN OTHERS.
* do nothing
ENDCASE.
ENDMODULE. "pai INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
LEAVE PROGRAM.
ENDFORM. "exit_program
*& Form SAVE_DATA
* text
FORM save_data. "$TMP
* define local data
data: ls_fcat type lvc_s_fcat,
lt_fcat type lvc_t_fcat.
lt_fcat = gt_fieldcat.
ls_fcat-edit = ' '.
modify lt_fcat from ls_fcat
TRANSPORTING edit
where ( edit = 'X' ). " display ALV should be not editable
" Simulate saving of data
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'Display modified list data'
* I_GRID_SETTINGS =
* IS_LAYOUT_LVC =
IT_FIELDCAT_LVC = lt_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS_LVC =
* IT_SORT_LVC =
* IT_FILTER_LVC =
* IT_HYPERLINK =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT_LVC =
* IS_REPREP_ID_LVC =
I_SCREEN_START_COLUMN = 5
I_SCREEN_START_LINE = 5
I_SCREEN_END_COLUMN = 120
I_SCREEN_END_LINE = 20
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IT_EXCEPT_QINFO_LVC =
* IR_SALV_FULLSCREEN_ADAPTER =
TABLES
t_outtab = gt_outtab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "SAVE_DATA
*& Form BUILD_FIELDCAT
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SBOOK'
CHANGING
ct_fieldcat = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
* Exchange smoker field with invoice field - just to
* make the dependance between SMOKER and CLASS more transparent
* (Smoking is only allowed in the first class).
IF ls_fcat-fieldname EQ 'SMOKER'.
ls_fcat-col_pos = 11.
ls_fcat-outputlen = 10.
MODIFY pt_fieldcat FROM ls_fcat.
ELSEIF ls_fcat-fieldname EQ 'INVOICE'.
ls_fcat-col_pos = 7.
MODIFY pt_fieldcat FROM ls_fcat.
ELSEIF ls_fcat-fieldname EQ 'CLASS'.
*§3.Set your dropdown field editable and assign the fieldname of the
* corresponding additional field to DRDN_FIELD of the fieldcatalog.
ls_fcat-edit = 'X'.
ls_fcat-drdn_field = 'DROP_DOWN_HANDLE'.
ls_fcat-outputlen = 5.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
ls_fcat-checktable = '!'. "do not check foreign keys
MODIFY pt_fieldcat FROM ls_fcat.
ENDIF.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form CREATE_AND_INIT_ALV
* text
* <--P_GT_OUTTAB text
* <--P_GT_FIELDCAT text
* <--P_GS_LAYOUT text
FORM create_and_init_alv CHANGING pt_outtab TYPE STANDARD TABLE
pt_fieldcat TYPE lvc_t_fcat.
DATA: lt_exclude TYPE ui_functions.
CREATE OBJECT g_custom_container
EXPORTING
container_name = g_container.
CREATE OBJECT g_grid
EXPORTING
i_parent = g_custom_container.
PERFORM build_fieldcat CHANGING pt_fieldcat.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM exclude_tb_functions CHANGING lt_exclude.
PERFORM set_drdn_table.
PERFORM build_data CHANGING pt_outtab.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
CHANGING
it_fieldcatalog = pt_fieldcat
it_outtab = pt_outtab[].
* Set editable cells to ready for input initially
CALL METHOD g_grid->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* <--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form set_drdn_table
* text
* --> p1 text
* <-- p2 text
FORM set_drdn_table.
*§2.Define a dropdown table and pass it to ALV.
* One listbox is referenced by a handle, e.g., '1'.
* For each entry that shall appear in this listbox
* you have to append a line to the dropdown table
* with handle '1'.
* This handle can be assigned to several columns
* of the output table using the field catalog.
DATA: lt_dropdown TYPE lvc_t_drop,
ls_dropdown TYPE lvc_s_drop.
ls_dropdown-handle = '1'.
ls_dropdown-value = 'F'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = 'F'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = 'C'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = 'Y'.
APPEND ls_dropdown TO lt_dropdown.
CALL METHOD g_grid->set_drop_down_table
EXPORTING
it_drop_down = lt_dropdown.
ENDFORM. " set_drdn_table
*& Form build_data
* text
* --> p1 text
* <-- p2 text
FORM build_data CHANGING pt_outtab TYPE STANDARD TABLE.
DATA: lt_sbook TYPE TABLE OF sbook,
ls_sbook TYPE sbook,
l_index TYPE i,
ls_outtab LIKE LINE OF gt_outtab.
SELECT * FROM sbook INTO TABLE lt_sbook UP TO g_max ROWS."#EC CI_NOWHERE
IF sy-subrc NE 0.
PERFORM generate_entries CHANGING lt_sbook.
ENDIF.
*§4.Set the handle of your additional field of your output
* table according to the listbox that shall be displayed.
LOOP AT lt_sbook INTO ls_sbook.
l_index = sy-tabix.
MOVE-CORRESPONDING ls_sbook TO ls_outtab.
CLEAR ls_outtab-class.
* Alternate between smoker and non smoker to make
* it more obvious what this example is about
l_index = l_index MOD 2.
IF l_index EQ 1.
ls_outtab-smoker = 'X'.
ELSE.
ls_outtab-smoker = ' '.
ENDIF.
IF ls_outtab-smoker EQ 'X'.
ls_outtab-drop_down_handle = '1'.
ELSE.
ls_outtab-drop_down_handle = '2'.
ENDIF.
APPEND ls_outtab TO pt_outtab.
ENDLOOP.
ENDFORM. " build_data
*& Form generate_entries
* text
* <--P_LT_SLFIGHT text
FORM generate_entries CHANGING pt_sbook TYPE STANDARD TABLE.
DATA: ls_sbook TYPE sbook,
l_month(2) TYPE c,
l_day(2) TYPE c,
l_date(8) TYPE c,
l_prebookid TYPE i.
ls_sbook-carrid = 'LH'.
ls_sbook-connid = '0400'.
ls_sbook-forcurkey = 'DEM'.
ls_sbook-loccurkey = 'USD'.
ls_sbook-custtype = 'B'.
DO 110 TIMES.
l_prebookid = sy-index.
ls_sbook-forcuram = sy-index * 10.
ls_sbook-loccuram = ls_sbook-loccuram * 2.
ls_sbook-customid = sy-index.
ls_sbook-counter = 18.
ls_sbook-agencynum = 11.
l_month = sy-index / 10 + 1.
DO 2 TIMES.
l_day = 3 + l_month + sy-index * 2.
l_date+0(4) = '2000'.
l_date+4(2) = l_month.
l_date+6(2) = l_day.
ls_sbook-fldate = l_date.
SUBTRACT 3 FROM l_day.
ls_sbook-order_date+0(6) = l_date+0(6).
ls_sbook-order_date+6(2) = l_day.
ls_sbook-bookid = l_prebookid * 2 + sy-index.
IF sy-index EQ 1.
ls_sbook-smoker = 'X'.
ELSE.
ls_sbook-smoker = space.
ENDIF.
ls_sbook-luggweight = l_prebookid * 10.
IF ls_sbook-luggweight GE 1000.
ls_sbook-wunit = 'G'.
ls_sbook-class = 'C'.
ELSE.
ls_sbook-wunit = 'KG'.
ls_sbook-class = 'Y'.
ENDIF.
IF ls_sbook-bookid > 40 AND ls_sbook-wunit EQ 'KG'.
ls_sbook-invoice = 'X'.
ENDIF.
IF ls_sbook-bookid EQ 2.
ls_sbook-cancelled = 'X'.
ls_sbook-class = 'F'.
ENDIF.
APPEND ls_sbook TO pt_sbook.
ENDDO.
ENDDO.
ENDFORM. " generate_entries
Regards
Uwe -
I have created an ALV grid with a dropdown as one of the columns. This all works fine, except that I want to be able to react to a change in the value of each line's dropdown.
Currently I am reacting to the DATA_CHANGED event of the ALV grid, but that is too late. This event is only triggered if you change the value of the dropdown and then hit enter, or click on another cell or row.
I want to be able to react to a change in the value immediately without having to lose focus of the dropdown.
Is this possible?
As an example, I have a table of records with one column as a dropdown called "Reason". A change in "reason" should change which fields in the row are editable. I'm sure I could just make sure to call the check_changed_data method before saving but I am hoping for a more user-friendly approach where as the new value is selected, the columns in the row can change to their required editable status.
Of course points will be awarded.Hi David,
Instead of using delayed call back event here i hav used data_changed event and this exacty suits ur requirement.....
even here we have to register the edit events............
PROGRAM bcalv_edit_06.
* Purpose:
* ~~~~~~~~
* This example shows how to define a dropdown listbox for all cells
* of one column in an editable ALV Grid Control.
* To check program behavior
* ~~~~~~~~~~~~~~~~~~~~~~~~~
* Klick on the dropdown button of column 'WUNIT'. It shows
* 'KG' and 'G' as suitable units for luggage weight.
* (The standard F4-Help shows many other units that does not
* make sense in this context).
* Essential steps (search for '§')
* ~~~~~~~~~~~~~~~
* 1.Define a dropdown table and pass it to ALV.
* 2.Set status of column WUNIT to editable and set a dropdown handle.
CLASS lcl_event_responder DEFINITION.
PUBLIC SECTION.
METHODS refresh_changed_data FOR EVENT data_changed
OF cl_gui_alv_grid
IMPORTING er_data_changed
e_ucomm.
ENDCLASS. "event_responder DEFINITION
DATA: ok_code LIKE sy-ucomm,
save_ok LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
handler TYPE REF TO lcl_event_responder,
g_grid TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
gt_fieldcat TYPE lvc_t_fcat,
gs_layout TYPE lvc_s_layo,
g_max TYPE i VALUE 100.
DATA: gt_outtab TYPE TABLE OF sbook.
* MAIN *
END-OF-SELECTION.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
PERFORM create_and_init_alv CHANGING gt_outtab
gt_fieldcat.
ENDIF.
ENDMODULE. "pbo OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
* do nothing
ENDCASE.
ENDMODULE. "pai INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
LEAVE PROGRAM.
ENDFORM. "exit_program
*& Form BUILD_FIELDCAT
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SBOOK'
CHANGING
ct_fieldcat = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
IF ls_fcat-fieldname EQ 'WUNIT'.
*§2.Set status of column WUNIT to editable and set a dropdown handle.
ls_fcat-edit = 'X'.
ls_fcat-drdn_hndl = '1'.
ls_fcat-outputlen = 7.
* Field 'checktable' is set to avoid shortdumps that are caused
* by inconsistend data in check tables. You may comment this out
* when the test data of the flight model is consistent in your system.
ls_fcat-checktable = '!'. "do not check foreign keys
MODIFY pt_fieldcat FROM ls_fcat.
ENDIF.
ENDLOOP.
ENDFORM. "build_fieldcat
*& Form CREATE_AND_INIT_ALV
* text
* <--P_GT_OUTTAB text
* <--P_GT_FIELDCAT text
* <--P_GS_LAYOUT text
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
pt_fieldcat TYPE lvc_t_fcat.
DATA: lt_exclude TYPE ui_functions,
lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT g_grid
EXPORTING i_parent = g_custom_container.
* Build fieldcat and set column WUNIT
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM build_fieldcat CHANGING pt_fieldcat.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM exclude_tb_functions CHANGING lt_exclude.
* Define a drop down table.
PERFORM set_drdn_table.
SELECT * FROM sbook INTO TABLE pt_outtab UP TO g_max ROWS.
IF sy-subrc NE 0.
* generate own entries if database table is empty
PERFORM generate_entries CHANGING pt_outtab.
ENDIF.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
CHANGING
it_fieldcatalog = pt_fieldcat
it_outtab = pt_outtab.
* Set editable cells to ready for input initially
CALL METHOD g_grid->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
g_grid->register_edit_event(
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified ). "Registering edit events
CREATE OBJECT handler.
SET HANDLER handler->refresh_changed_data FOR g_grid.
CLEAR lt_f4.
lt_f4-fieldname = 'WUNIT'.
lt_f4-register = 'X'.
APPEND lt_f4.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* <--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_cut.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_paste_new_row.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_undo.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form set_drdn_table
* text
* --> p1 text
* <-- p2 text
FORM set_drdn_table.
*§1.Define a dropdown table and pass it to ALV.
* One listbox is referenced by a handle, e.g., '1'.
* For each entry that shall appear in this listbox
* you have to append a line to the dropdown table
* with handle '1'.
* This handle can be assigned to several columns
* of the output table using the field catalog.
DATA: lt_dropdown TYPE lvc_t_drop,
ls_dropdown TYPE lvc_s_drop.
* First listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = 'KG'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = 'G'.
APPEND ls_dropdown TO lt_dropdown.
CALL METHOD g_grid->set_drop_down_table
EXPORTING
it_drop_down = lt_dropdown.
ENDFORM. " set_drdn_table
*& Form generate_entries
* text
* <--P_LT_SLFIGHT text
FORM generate_entries CHANGING pt_sbook TYPE STANDARD TABLE.
* This form is only needed if database table sbook is empty.
* It generates some entries so that you may
* still try out this example program.
DATA: ls_sbook TYPE sbook,
l_month(2) TYPE c,
l_day(2) TYPE c,
l_date(8) TYPE c,
l_prebookid TYPE i.
ls_sbook-carrid = 'LH'.
ls_sbook-connid = '0400'.
ls_sbook-forcurkey = 'DEM'.
ls_sbook-loccurkey = 'USD'.
ls_sbook-custtype = 'B'.
DO 110 TIMES.
l_prebookid = sy-index.
ls_sbook-forcuram = sy-index * 10.
ls_sbook-loccuram = ls_sbook-loccuram * 2.
ls_sbook-customid = sy-index.
ls_sbook-counter = 18.
ls_sbook-agencynum = 11.
l_month = sy-index / 10 + 1.
DO 2 TIMES.
l_day = 3 + l_month + sy-index * 2.
l_date+0(4) = '2000'.
l_date+4(2) = l_month.
l_date+6(2) = l_day.
ls_sbook-fldate = l_date.
SUBTRACT 3 FROM l_day.
ls_sbook-order_date+0(6) = l_date+0(6).
ls_sbook-order_date+6(2) = l_day.
ls_sbook-bookid = l_prebookid * 2 + sy-index.
IF sy-index EQ 1.
ls_sbook-smoker = 'X'.
ELSE.
ls_sbook-smoker = space.
ENDIF.
ls_sbook-luggweight = l_prebookid * 10.
IF ls_sbook-luggweight GE 1000.
ls_sbook-wunit = 'G'.
ls_sbook-class = 'C'.
ELSE.
ls_sbook-wunit = 'KG'.
ls_sbook-class = 'Y'.
ENDIF.
IF ls_sbook-bookid > 40 AND ls_sbook-wunit EQ 'KG'.
ls_sbook-invoice = 'X'.
ENDIF.
IF ls_sbook-bookid EQ 2.
ls_sbook-cancelled = 'X'.
ls_sbook-class = 'F'.
ENDIF.
APPEND ls_sbook TO pt_sbook.
ENDDO.
ENDDO.
ENDFORM. " generate_entries
* CLASS event_responder IMPLEMENTATION
CLASS lcl_event_responder IMPLEMENTATION.
METHOD refresh_changed_data.
BREAK-POINT.
ENDMETHOD. "click
ENDCLASS. "event_responder IMPLEMENTATION -
Display additional Text in ALV Grid
Hello,
I have an ALV Grid display and need to display additional information on the top of the list. I have used the grid-title, but the field is defined as 70 characters and thats not enough.
Is it possible to display more text with alv grid?
Regards MichaelHi Ravi,
I´m creating my alv object orientated and I don´t know, how to manage that now. Can You explain me, where and how I have to do it?
My Dynpro has one custom container and I´m calling the method SET_TABLE_FOR_FIRST_DISPLAY in PBO.
And I need the comment to be printed with the ALV by pressing the print button in the toolbar of the ALV
Thank You!
Message was edited by: Michael Schmidt -
First try with ALV Grid and Abap Objects
Hi,
this is my first try to write a simple report which just reads a textfile and display it in an ALV Grid. As a basis, I used some examples from SDN, but it did not work as expected
I would like just to use a docking container. I do not need a separate area for the ALV Grid. The report gives no syntax errors, but it just display the report title, nothing else. SAP R/3 Release is 4.7. Below is the source code of the report. Any idea what is missing?
*& Report Z_PLAN_TEXT_UPLOAD *
REPORT z_plan_text_upload.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_dynnr TYPE sy-dynnr,
gf_repid TYPE sy-repid.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Local Class Definition
* Local Class Implementation
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
SKIP.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SKIP.
PARAMETERS:
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn.
SELECTION-SCREEN END OF BLOCK b1.
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
gf_dynnr = sy-dynnr.
gf_repid = sy-repid.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog
CHANGING gt_fieldcat.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
* PARENT =
repid = gf_repid
dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
* RATIO =
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid IS INITIAL.
CREATE OBJECT go_alv_grid
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid is initial
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Kostenstelle' .
ls_fcat-seltext = 'Kostenstelle' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalogI have added some more functionality to my report. The good thing is, the report works as it should.
BUT, I'm not really sure, whether this is a good (correct) design. The report works the following way:
1. Read planning data form text file into internal table
2. Display the internal table
3. Convert the data and display the converted result
4. Post the converted data to the system
5. Display log with messages
The main thing is, I would like to know, do i really need two dynros, to display the two different internal tables or is it possible just to use one ALV-Grid? I was not able to find another solution. Any comment or help to the report is appreciated.
*& Report Z_PLAN_TEXT_UPLOAD_TEST *
REPORT z_plan_text_upload_test.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_okcode TYPE ui_func,
gf_balloghndl TYPE balloghndl.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
go_alv_grid_0200 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungsposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Bapi Strukturen
DATA:
gs_headerinfo TYPE bapiplnhdr,
gt_indexstructure TYPE TABLE OF bapiacpstru,
gs_indexstructure LIKE LINE OF gt_indexstructure,
gt_coobject TYPE TABLE OF bapipcpobj,
gs_coobject LIKE LINE OF gt_coobject,
gt_pervalue TYPE TABLE OF bapipcpval,
gs_pervalue LIKE LINE OF gt_pervalue,
gt_return TYPE TABLE OF bapiret2,
gs_return LIKE LINE OF gt_return,
gt_control TYPE TABLE OF bapipcpctrl,
gt_totvalue TYPE TABLE OF bapipcptot.
TYPES:
BEGIN OF gy_bapi_input,
version TYPE versn,
* perio TYPE co_perio,
fisc_year TYPE gjahr,
coobject(10) TYPE c,
cost_elem TYPE kstar,
wkgbtr01 TYPE wkgxxx,
wkgbtr02 TYPE wkgxxx,
wkgbtr03 TYPE wkgxxx,
wkgbtr04 TYPE wkgxxx,
wkgbtr05 TYPE wkgxxx,
wkgbtr06 TYPE wkgxxx,
wkgbtr07 TYPE wkgxxx,
wkgbtr08 TYPE wkgxxx,
wkgbtr09 TYPE wkgxxx,
wkgbtr10 TYPE wkgxxx,
wkgbtr11 TYPE wkgxxx,
wkgbtr12 TYPE wkgxxx,
END OF gy_bapi_input.
DATA:
gt_bapi_input TYPE TABLE OF gy_bapi_input,
gs_bapi_input LIKE LINE OF gt_bapi_input.
* Anwendungs-Log
DATA: gs_balsmsg TYPE bal_s_msg.
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SELECTION-SCREEN SKIP.
PARAMETERS:
gp_kokrs LIKE coep-kokrs,
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn,
gp_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
* Local Class Definition
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar_0100 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0100 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm,
handle_toolbar_0200 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0200 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
* Local Class Implementation
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar_0100.
PERFORM handle_toolbar_0100
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0100.
PERFORM handle_user_command_0100
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
METHOD handle_toolbar_0200.
PERFORM handle_toolbar_0200
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0200.
PERFORM handle_user_command_0200
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
ENDCLASS. "lcl_event_handler IMPLEMENTATION
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
PERFORM create_log.
gs_return-type = 'I'.
IF gp_test = 'X'.
gs_return-message = text-010.
ELSE.
gs_return-message = text-020.
ENDIF.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
gs_balsmsg-msgty = sy-msgty.
gs_balsmsg-msgid = sy-msgid.
gs_balsmsg-msgno = sy-msgno.
gs_balsmsg-msgv1 = sy-msgv1.
gs_balsmsg-msgv2 = sy-msgv2.
gs_balsmsg-msgv3 = sy-msgv3.
gs_balsmsg-msgv4 = sy-msgv4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDIF.
CALL SCREEN '0100'.
*& Module status_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999 "full-screen size !!!
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog_input
CHANGING gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0100 IS INITIAL.
CREATE OBJECT go_alv_grid_0100
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0100 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0100 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0100.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0100->handle_toolbar_0100
FOR go_alv_grid_0100.
SET HANDLER go_event_handler_0100->handle_user_command_0100
FOR go_alv_grid_0100.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0100->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0100->set_toolbar_interactive.
ENDMODULE. " status_0100 OUTPUT
*& Module status_0200 OUTPUT
* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog---------------------------------------*
PERFORM build_fieldcatalog_bapi_input
CHANGING
gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0200 IS INITIAL.
CREATE OBJECT go_alv_grid_0200
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0200 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0200 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0200.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0200->handle_toolbar_0200
FOR go_alv_grid_0200.
SET HANDLER go_event_handler_0200->handle_user_command_0200
FOR go_alv_grid_0200.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0200->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_bapi_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0200->set_toolbar_interactive.
CALL METHOD go_alv_grid_0200->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_alv_grid_0200.
ENDMODULE. " status_0200 OUTPUT
*& Module user_command_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0100 INPUT
*& Module user_command_0200 INPUT
* text
MODULE user_command_0200 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0200 INPUT
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalog
*& Form handle_toolbar_0100
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0100
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'KONV'.
ls_toolbar-quickinfo = 'Konvertieren'.
ls_toolbar-text = 'Konvertieren'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0100
*& Form handle_user_command_0100
* text
* -->P_E_UCOMM text
FORM handle_user_command_0100
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'KONV'.
PERFORM convert_data.
ENDCASE.
ENDFORM. " handle_user_command_0100
*& Form exit_program
* text
* --> p1 text
* <-- p2 text
FORM exit_program.
CALL METHOD go_alv_grid_0100->free.
IF NOT go_alv_grid_0200 IS INITIAL.
CALL METHOD go_alv_grid_0200->free.
ENDIF.
CALL METHOD go_docking_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = sy-repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form handle_toolbar_0200
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0200
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'POST'.
ls_toolbar-quickinfo = 'Buchen'.
ls_toolbar-text = 'Buchen'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0200
*& Form handle_user_command_0200
* text
* -->P_E_UCOMM text
FORM handle_user_command_0200
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'POST'.
PERFORM post.
ENDCASE.
ENDFORM. " handle_user_command_0200
*& Form convert_data
* text
* --> p1 text
* <-- p2 text
FORM convert_data.
DATA: lf_perio(3) TYPE n.
LOOP AT gt_text_input INTO gs_text_input.
TRANSLATE gs_text_input-planbetrag USING '. '.
TRANSLATE gs_text_input-planbetrag USING ',.'.
CONDENSE gs_text_input-planbetrag.
gs_bapi_input-version = gp_versn.
gs_bapi_input-fisc_year = gp_gjahr.
gs_bapi_input-coobject = gs_text_input-kostenstelle.
gs_bapi_input-cost_elem = gs_text_input-kostenart.
lf_perio = gs_text_input-planperiode.
CASE lf_perio.
WHEN '001'.
gs_bapi_input-wkgbtr01 = gs_text_input-planbetrag.
WHEN '002'.
gs_bapi_input-wkgbtr02 = gs_text_input-planbetrag.
WHEN '003'.
gs_bapi_input-wkgbtr03 = gs_text_input-planbetrag.
WHEN '004'.
gs_bapi_input-wkgbtr04 = gs_text_input-planbetrag.
WHEN '005'.
gs_bapi_input-wkgbtr05 = gs_text_input-planbetrag.
WHEN '006'.
gs_bapi_input-wkgbtr06 = gs_text_input-planbetrag.
WHEN '007'.
gs_bapi_input-wkgbtr07 = gs_text_input-planbetrag.
WHEN '008'.
gs_bapi_input-wkgbtr08 = gs_text_input-planbetrag.
WHEN '009'.
gs_bapi_input-wkgbtr09 = gs_text_input-planbetrag.
WHEN '010'.
gs_bapi_input-wkgbtr10 = gs_text_input-planbetrag.
WHEN '011'.
gs_bapi_input-wkgbtr11 = gs_text_input-planbetrag.
WHEN '012'.
gs_bapi_input-wkgbtr12 = gs_text_input-planbetrag.
ENDCASE.
COLLECT gs_bapi_input INTO gt_bapi_input.
CLEAR gs_bapi_input.
ENDLOOP. "at gt_text_input
CALL SCREEN 0200.
ENDFORM. " convert_data
*& Form build_fieldcatalog_bapi_input
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_bapi_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VERSION' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'FISC_YEAR' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COOBJECT' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COST_ELEM' .
ls_fcat-ref_table = 'BAPIPCPVAL' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR01'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR02'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR03'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR04'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR05'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR06'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR07'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR08'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR09'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR10'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR11'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR12'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. " build_fieldcatalog_bapi_input
*& Form post
* text
* --> p1 text
* <-- p2 text
FORM post.
DATA:
lf_index(6) TYPE n,
lf_kostl LIKE csks-kostl,
lf_aufnr LIKE aufk-aufnr,
lf_kstar LIKE cska-kstar.
DATA:
lt_csks TYPE TABLE OF csks.
break c5085345.
* Header
gs_headerinfo-co_area = gp_kokrs.
gs_headerinfo-fisc_year = gp_gjahr.
gs_headerinfo-period_from = '001'.
gs_headerinfo-period_to = '012'.
gs_headerinfo-version = gp_versn.
gs_headerinfo-plan_currtype = 'C'.
LOOP AT gt_bapi_input INTO gs_bapi_input.
* Fill index structure
CLEAR gs_indexstructure.
lf_index = sy-tabix.
gs_indexstructure-object_index = lf_index.
gs_indexstructure-value_index = lf_index.
gs_indexstructure-attrib_index = '000000'.
INSERT gs_indexstructure INTO TABLE gt_indexstructure.
* Fill coobject
CLEAR gs_coobject.
gs_coobject-object_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_kostl.
SELECT * FROM csks INTO TABLE lt_csks
WHERE
kokrs = gp_kokrs AND
kostl = lf_kostl.
IF sy-subrc = 0.
gs_coobject-costcenter = lf_kostl.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_aufnr.
CALL FUNCTION 'K_ORDER_READ'
EXPORTING
aufnr = lf_aufnr
EXCEPTIONS
not_found = 1.
IF NOT sy-subrc = 0.
gs_return-type = 'E'.
gs_return-message+0(10) = 'CO-Objekt '.
gs_return-message+10(10) = gs_bapi_input-coobject.
gs_return-message+20(20) = ' existiert nicht.'.
CONDENSE gs_return-message.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
EXIT.
ENDIF. "IF NOT sy-subrc = 0
gs_coobject-orderid = lf_aufnr.
ENDIF. "sy-subrc = 0
INSERT gs_coobject INTO TABLE gt_coobject.
* Period value
gs_pervalue-value_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-cost_elem
IMPORTING
output = lf_kstar.
gs_pervalue-cost_elem = lf_kstar.
gs_pervalue-fix_val_per01 = gs_bapi_input-wkgbtr01.
gs_pervalue-fix_val_per02 = gs_bapi_input-wkgbtr02.
gs_pervalue-fix_val_per03 = gs_bapi_input-wkgbtr03.
gs_pervalue-fix_val_per04 = gs_bapi_input-wkgbtr04.
gs_pervalue-fix_val_per05 = gs_bapi_input-wkgbtr05.
gs_pervalue-fix_val_per06 = gs_bapi_input-wkgbtr06.
gs_pervalue-fix_val_per07 = gs_bapi_input-wkgbtr07.
gs_pervalue-fix_val_per08 = gs_bapi_input-wkgbtr08.
gs_pervalue-fix_val_per09 = gs_bapi_input-wkgbtr09.
gs_pervalue-fix_val_per10 = gs_bapi_input-wkgbtr10.
gs_pervalue-fix_val_per11 = gs_bapi_input-wkgbtr11.
gs_pervalue-fix_val_per12 = gs_bapi_input-wkgbtr12.
INSERT gs_pervalue INTO TABLE gt_pervalue.
ENDLOOP. "at gt_bapi_input
* Buchungsbaustein
CALL FUNCTION 'BAPI_PRIM_COST_CHECK_AND_POST'
EXPORTING
header_info = gs_headerinfo
testrun = gp_test
* DELTA = ' '
TABLES
idx_structure = gt_indexstructure
object = gt_coobject
per_value = gt_pervalue
tot_value = gt_totvalue
contrl = gt_control
return = gt_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
LOOP AT gt_return INTO gs_return.
gs_balsmsg-msgty = gs_return-type.
gs_balsmsg-msgid = gs_return-id.
gs_balsmsg-msgno = gs_return-number.
gs_balsmsg-msgv1 = gs_return-message_v1.
gs_balsmsg-msgv2 = gs_return-message_v2.
gs_balsmsg-msgv3 = gs_return-message_v3.
gs_balsmsg-msgv4 = gs_return-message_v4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDLOOP. "AT gt_return
PERFORM show_log.
ENDFORM. " post
*& Form create_log
* text
* --> p1 text
* <-- p2 text
FORM create_log .
DATA: ls_balslog TYPE bal_s_log.
* Einige Verwaltungsdaten
ls_balslog-extnumber = 'ZPLAN010'.
ls_balslog-aluser = sy-uname.
ls_balslog-alprog = sy-repid.
* Create
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_balslog
* IMPORTING
* e_log_handle = gf_balloghndl
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_log
*& Form add_log_message
* text
* -->P_GS_BALSMSG text
FORM add_log_message
USING
ps_balsmsg TYPE bal_s_msg.
break c5085345.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
* I_LOG_HANDLE =
i_s_msg = ps_balsmsg
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_messa
*& Form add_log_message_free_text
* text
* -->P_GS_RETURN_TYPE text
* -->P_GS_RETURN_MESSAGE text
FORM add_log_message_free_text
USING
ps_type
ps_message.
CALL FUNCTION 'BAL_LOG_MSG_ADD_FREE_TEXT'
EXPORTING
* I_LOG_HANDLE =
i_msgty = ps_type
* I_PROBCLASS = '4'
i_text = ps_message
* I_S_CONTEXT =
* I_S_PARAMS =
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_message_free_text
*& Form show_log
* text
* --> p1 text
* <-- p2 text
FORM show_log .
DATA:
l_s_display_profile TYPE bal_s_prof.
* get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
e_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* use grid for display if wanted
l_s_display_profile-use_grid = 'X'.
* set report to allow saving of variants
l_s_display_profile-disvariant-report = sy-repid.
* when you use also other ALV lists in your report,
* please specify a handle to distinguish between the display
* variants of these different lists, e.g:
l_s_display_profile-disvariant-handle = 'LOG'.
* call display function module
* We do not specify any filter (like I_S_LOG_FILTER, ...,
* I_T_MSG_HANDLE) since we want to display all logs available
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
i_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Not gettting quantity displayed in the alv grid
hi experts
iam displaying vbeln, matnr, quantity, sellingprice etc for an customer using fieldcat. in alv grid.
iam able to get all the fields other than quantity in the output.
i have taken vbap-kwmeng, actually in the va03 it is displaying from komp.
i have tried with the following
wa_fieldcat-col_pos = 5.
wa_fieldcat-fieldname = 'KWMEMG'.
wa_fieldcat-tabname = 'IT_DISPLAY'.
wa_fieldcat-datatype = 'QUAN'.
wa_fieldcat-outputlen = 15.
wa_fieldcat-seltext_m = 'QUANTITY'.
wa_fieldcat-ref_fieldname = 'KWMENG'.
wa_fieldcat-ref_tabname = 'VBAP'.
wa_fieldcat-qfieldname = 'VRKME'.
wa_fieldcat-qtabname = 'VBAP'.
but iam not getting the respective output.
please help
thanks in advance.
maayaI am not sure why are you not getting :
Just remove col_pos and see the results,and also increase output len to 18.
<b>clear wa_fieldcat.</b>
wa_fieldcat-col_pos = 5. -> first comment and see the results
wa_fieldcat-fieldname = 'KWMEMG'.
wa_fieldcat-tabname = 'IT_DISPLAY'.
wa_fieldcat-outputlen = 18.
wa_fieldcat-seltext_m = 'QUANTITY'.
wa_fieldcat-seltext_s = 'QUANTITY'.
wa_fieldcat-seltext_l = 'QUANTITY'.
<b>append wa_fieldcat to i_fieldcat.</b>
Always clear the wa_fieldcat.
Thanks
Seshu
Maybe you are looking for
-
Getting jbo-26080 from BC4J Tester
I just created a master-detail relationship in Jdev 3.2 BC4J. I want to test the relationship in the Tester. I am able to insert one detail record for the master. When I am trying to insert the second detail record I am getting the following error me
-
How to install OS X from backup disk image?
I created a disk image of my OS X Leopard disk as a backup, but later discovered that I could not boot from the mounted disk image, nor could I use it to burn a new bootable OS X disk. What did I do wrong?
-
Monitoring printers attched to a Windows print server cluster with Operations Manager
I am trying to configure SCOM 2012 R2 to monitor the individual printers that are managed with a Windows 2008 R2 Print Cluster. I have the management packs installed for Windows Clustering and Print Servers. When I view the print queue status in the
-
Response regarding "crippled" 1st gen MacPro
I'm curious to know if others have had this experience. I purchase a 1st generation Mac Pro after significant amount of research in order to run Windows XP. I am a returning Mac user and bought the first laptop ever offered by Mac. I do not make my p
-
Software update notification (red circle) will not disappear even after download
Hi all, just a quick question. I updated my software last night after seeing the red, circular "1" update notification over the settings menu. Everything downloaded normally on both my ipad and iphone, but for some reason, the notification circle wil