Scroll text in ALV column using OO ALV grid

Hi All,
I have displayed ALV grid on the screen which has four columns. One of the columns is a text field with text255 domain. This Column is also editable. I have following problem and need help;
The column for some reason displays only 130 chars. I tried to set the output length in field cat to 255 still no difference. My custom container width is equivalent to max screen width of 255.
I also tried to crunch the other three columns to display as much characters as needed so that I am left with enough space for the last column which is comments but still it displays on 130 characters. And thoughts on why this is happening.
Thanks,
Yogeeta

Hi,
The ALV will only let you show 130 characters. You could use 2 columns to display the text.
Martin

Similar Messages

  • Toolbar in alv display using oops alv

    i have written code for displaying toolbar in alv display using oops, but it is not displaying please find the below code and let me know reason.
    *& Report  ZTRANSFER_ORDER2                                            *
    REPORT  ZTRANSFER_ORDER2   .
    *& Report  ZTRANSFER_ORDER                                             *
       TABLES:sflight.
       TYPE-POOLS : icon.
      * G L O B A L   I N T E R N  A L   T A B L E S
    CLASS lcl_event_receiver DEFINITION DEFERRED.
    types : begin of ty_mara,
            matnr type matnr,
            mtart type mtart,
            mbrsh type mbrsh,
            matkl type matkl,
            bismt type bismt,
            meins type meins,
            end of ty_mara.
      DATA: t_mara type STANDARD TABLE OF ty_mara.
      * G L O B A L   D A T A
       DATA: ok_code LIKE sy-ucomm,
             g_wa_mara type ty_mara.
        DATA : t_fcat type LVC_T_FCAT.
      DATA  : l_VAR TYPE disvariant.
      DATA :  gs_layout type lvc_s_layo.
      * Declare reference variables to the ALV grid and the container
    G L O B A L   D A T A
      DATA: ok_code LIKE sy-ucomm.
    Declare reference variables to the ALV grid and the container
       DATA:
         go_grid             TYPE REF TO cl_gui_alv_grid,
         go_custom_container TYPE REF TO cl_gui_custom_container.
      data :  it_toolbar  TYPE stb_button,
      event_receiver TYPE REF TO lcl_event_receiver.
      * S T A R T - O F - S E L E C T I O N.
       START-OF-SELECTION.
        CALL SCREEN 100   .
    *CLASS lcl_event_receiver DEFINITION.
    CLASS lcl_event_receiver DEFINITION.
    PUBLIC SECTION.
        CLASS-METHODS:
    *handling toolbar for interactive
         handle_toolbar
            FOR EVENT toolbar OF cl_gui_alv_grid
                IMPORTING e_object e_interactive,
    *handling menu button
         handle_menu_button
            FOR EVENT menu_button OF cl_gui_alv_grid
                IMPORTING e_object e_ucomm,
    *On click of the menu button
        handle_user_command
            FOR EVENT user_command OF cl_gui_alv_grid
                IMPORTING e_ucomm.
        PRIVATE SECTION.
        ENDCLASS.
    CLASS lcl_event_receiver IMPLEMENTATION.
    METHOD handle_toolbar.
    handle toolbar
    CLEAR it_toolbar.
    MOVE 'DETAIL' TO it_toolbar-function.
        MOVE icon_detail TO it_toolbar-icon.
        MOVE 2 TO it_toolbar-butn_type.
        APPEND it_toolbar TO e_object->mt_toolbar.
        ENDMETHOD.                    "handle_toolbar
        METHOD handle_menu_button.
    handle own menubuttons
        IF e_ucomm = 'DETAIL'.
          CALL METHOD e_object->add_function
            EXPORTING
              fcode = 'DISPLAY'
              text  = 'DISPLAY'.
        ENDIF.
      ENDMETHOD.                    "handle_menu_button
      METHOD handle_user_command.
    *On click
        CASE e_ucomm.
          WHEN 'DISPLAY'.
            MESSAGE 'Menu Clicked' TYPE 'I'.
        ENDCASE.
      ENDMETHOD.                           "handle_user_command
    ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
      *&      Module  USER_COMMAND_0100  INPUT
      MODULE user_command_0100 INPUT.
        CASE ok_code.
          WHEN 'EXIT'.
            LEAVE TO SCREEN 0.
        ENDCASE.
      ENDMODULE.                 " USER_COMMAND_0100  INPUT
      *&      Module  STATUS_0100  OUTPUT
       MODULE status_0100 OUTPUT.
        sET PF-STATUS 'STATUS'.
    Create objects
         IF go_custom_container IS INITIAL.
           CREATE OBJECT go_custom_container
             EXPORTING container_name = 'ALV_CONTAINER'.
           CREATE OBJECT go_grid
             EXPORTING
               i_parent = go_custom_container.
           PERFORM load_data_into_grid.
         ENDIF.
       ENDMODULE.                 " STATUS_0100  OUTPUT
      *&      Form  load_data_into_grid
       FORM load_data_into_grid.
    Read data from table SFLIGHT
         SELECT matnr mtart mbrsh matkl bismt meins
           FROM mara
           INTO corresponding fields of TABLE t_mara.
       PERFORM fld_cate changing T_fcat.
        l_var-report = sy-repid.
      gs_layout-grid_title = 'Analysis Report'.
    gs_layout-NO_TOOLBAR = 'X'.
    gs_layout-BOX_FNAME = 'Selection'.
    Load data into the grid and display them
            caLL METHOD go_grid->set_table_for_first_display
            EXPORTING
            i_structure_name = 'S_MVKE'
              i_save          = 'A'
               is_variant       = l_var
                is_layout             = gs_layout
           CHANGING
             it_outtab        = t_mara[]
             it_fieldcatalog  = t_fcat.
      endform.
    *&      Module  pai  INPUT
          text
    MODULE pai INPUT.
    data: l_valid type c.
       clear ok_code.
       break-point.
       ok_code = sy-ucomm.
           CASE ok_code.
           WHEN 'EXIT'.
             LEAVE TO SCREEN 0.
           WHEN 'BACK'.
             call method go_grid->check_changed_data
                 importing
                    e_valid = l_valid.
            loop at t_mara into g_wa_mara.
            endloop.
         ENDCASE.
    ENDMODULE.                 " pai  INPUT
    *&      Form  fld_cate
          text
         <--P_T_FCAT  text
    FORM fld_cate  CHANGING P_T_FCAT  TYPE lvc_t_fcat.
    DATA : s_fcat type LVC_S_FCAT .
    REFRESH: t_fcat.
      CLEAR s_fcat.
    s_fcat-fieldname = 'BOX1'.
    s_fcat-coltext =   'Box1'.
    s_fcat-seltext =   'Box1'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
      s_fcat-row_pos = 1.
      s_fcat-col_pos = 1.
      s_fcat-fieldname = 'MATNR'.
      s_fcat-ref_field = 'MATNR'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material'.
      s_fcat-seltext =   'Material'.
    s_fcat-EDIT = 'X'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
       s_fcat-row_pos = 2.
      s_fcat-col_pos = 2.
      s_fcat-fieldname = 'MTART'.
      s_fcat-ref_field = 'MTART'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material type'.
      s_fcat-seltext =   'Material type'.
      APPEND s_fcat TO P_T_FCAT.
    CLEAR s_fcat.
    s_fcat-fieldname = 'BOX2'.
    s_fcat-coltext =   'Box2'.
    s_fcat-seltext =   'Box2'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
      s_fcat-row_pos = 3.
      s_fcat-col_pos = 3.
      s_fcat-fieldname = 'MBRSH'.
      s_fcat-ref_field = 'MBRSH'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Industry Sector'.
      s_fcat-seltext =   'Industry Sector'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 4.
      s_fcat-col_pos = 4.
      s_fcat-fieldname = 'MATKL'.
      s_fcat-ref_field = 'MATKL'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Material Group'.
      s_fcat-seltext =   'Material Group'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 5.
      s_fcat-col_pos = 5.
      s_fcat-fieldname = 'BISMT'.
      s_fcat-ref_field = 'BISMT'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Old material number'.
      s_fcat-seltext =   'Old material number'.
      APPEND s_fcat TO P_T_FCAT.
      CLEAR s_fcat.
        s_fcat-row_pos = 6.
      s_fcat-col_pos = 6.
      s_fcat-fieldname = 'MEINS'.
      s_fcat-ref_field = 'MEINS'.
      s_fcat-ref_table = 'T_MARA'.
      s_fcat-coltext =   'Base Unit of Measure'.
      s_fcat-seltext =   'Base Unit of Measure'.
      APPEND s_fcat TO P_T_FCAT.
    CLEAR s_fcat.
    s_fcat-fieldname = 'BOX3'.
    s_fcat-coltext =   'Box3'.
    s_fcat-seltext =   'Box3'.
    s_fcat-CHECKBOX = 'X'.
    s_fcat-EDIT = 'X'.
    APPEND s_fcat TO P_T_FCAT.
    ENDFORM.                    " fld_cate                     .

    MOVE 2 TO it_toolbar-butn_type.
    Try changing the 2 (menu) to 0 (button) and see if that helps
    also you need to set the event handler after you create your alv object
    set handler handle_toolbar for [whatever object is called].
    Edited by: Kev Mycock on Jul 24, 2008 7:59 AM

  • Text in subtotal line using OO ALV

    Hi experts:
      Hope you can help me.
      I'm trying to create an ALV report with the layout like the below, where the line starting with ** means Subtotal line (i.e, I want to calculate subtotals at customer level).
       USER                NAME                   CUSTOMER                NAME                           INVOICE        AMOUNT
                   1     Constructoras Tal     2000001     100,00 u20AC
                   1     Constructoras Tal     2000002     23,00 u20AC
                   1     Constructoras Tal     2000003     34,00 u20AC
                   1     Constructoras Tal     2000004     45,00 u20AC
    *FSCMAs     Miguel Angel     Cerrado     1     Constructoras Tal          202,00 u20AC*  
    I know how to use method set_table_for_first_display adding the sort criteria to calculate the subtotal, but my question is: if I mark the subtot option for field CUSTOMER, the subtotal line currently displayed is    
    *+                                           1                                      202,00 u20AC+*    
    and I also want the other texts to be displayed in the subtotal line. I tryed by marking SUBTOT for al the fields I wnat to display, but this is creating extra subtotal lines.
    What I want is one subtotal line will all the texts, as described in the first layout.
    How can I do this (if possible)?.
    Thanks in advance for your answers.
    Regards,
    Carlos.

    1 Constructoras Tal 2000001 100,00 u20AC
    1 Constructoras Tal 2000002 23,00 u20AC
    1 Constructoras Tal 2000003 34,00 u20AC
    1 Constructoras Tal 2000004 45,00 u20AC
    *FSCMAs Miguel Angel Cerrado 1 Constructoras Tal 202,00 u20AC*

  • ALV: Search help for editable column using OVS/Input Help Component Usage?

    Hi all,
    Is is possible to assign a value help like OVS or "Input Help Component Usage" to a editable ALV column using Web Dynpro?
    Thanks and regards,
    Ulrich

    Hi Madhu,
    Than I must have made something wrong because this is exactly what I've tried.
    I'll check my freely prgrammed value  and the assigning again.
    Thanks a lot for your quick reply.
    Ulrich

  • Help on Lock Up in Scrolling Text Generator

    I'm finally getting to use my copy of FCE HD (V 3.0) eventhough I've had it since last summer and I'm having a problem.
    When I start the scrolling text generator, I can use all of the controls EXCEPT for the color button. As soon as I click the SQUARE to pull up the pallet and the pallet comes up, the machine locks up except for the mouse. Abosolutely nothing works to close the pallet or close anything else for that matter. I have to push the Power button on the machine to turn it off.
    I've used the color pallet in many other controls with no problem.
    Is this a bug?
    I have searched but haven't found anything like it reported by anyone else.
    Any help would be appreciated.
    Thanks,
    Ken

    AHA!
    Tom thanks for the "deeper" tip, it's what had my brain going when I went to the "plist" file in preferences and discovered it's last modified date was 1970.
    Ian thanks for the instructions on how to get to the pref's.
    The epiphany occurred as I saw that date and realized that I had been ignoring the little window that had popped up on the last months startups that said the time was messed up.
    I realized that my little battery had gone dead but kept using the machine anyhow since nothing seemed to be malfunctioning.
    Well sports fans, the time being off was the source of the problem. After I reset it to current time and date, I was able to use the color picker right away without incident.
    Interestingly enough, the color pickers in Live Type were working just fine AND the Color Correction in FCE were working just fine.
    Eventhough I have a B.S.C.S., I would have never in a million years guessed that the clock had any impact on text scrolling.
    All I can say is "Bob's your uncle" Ian & Tom.
    Many thanks!!
    Ken

  • Subtotal text in the 3rd column of the alv list

    Hi Guru,
    Can anyone know or have some codes on how to implement a subtotal text in the 3rd column of the ALV list. Im using FM REUSE_ALV_HIERSEQ_LIST_DISPLAY to display the report.
    Please give some advise or help.
    Thanks and rewards is given.

    Hi my friend,
    Insted Using FM REUSE_ALV_HIERSEQ_LIST_DISPLAY
    better use REUSE_ALV_GRID_DISPLAY.
    in that 
            it_sort            = i_sort[]
      constants :     c_x       type char1 value 'X'.
        l_rec_fieldcat_wa-do_sum    = c_x.
      endif.

  • How to Display  Formatted Text  IN ALV Column?

    HI experts ,
    I am displaying  ALV with Multiple Column's , One of the Column is TEXT(Fomatted text).
    When ALV is Displayed  TEXT Column Comes as Continues TEXT . and is Not Formatted .
    Now when i want to edit this text i am Calling another View  which contains text edit . This Text edit will display correct Formatted Text . but when i save it and Come back to ALV again i do see continues text .
    Is there  any way where in i can display  the Formatted text in ALV Column ?
    Any body have any clue with this ...
    Thanks in Advance
    Patil
    Edited by: Badarinarayan Patil on Feb 22, 2008 3:45 PM

    Hi Juergen,
    I found Your blog and found it  really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
    I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
    Some suggestion will be greatly appreciated.
    Thankyou
    Simone

  • Show text in the column other than contains in actual data field WD ALV

    Hi,
    I want to show the data in the ALV column other than contains in the actual field for this column. Fot this purpose I use method   SET_TEXT_FIELDNAME of the interface IF_SALV_WD_COLUMN_REF. Unfortunately, I still see the contents of the actual field in this column. What am I doing wrong?
    Here is the snippet:
    lr_column_ref type ref to  cl_salv_wd_column,
    lr_column_ref_ref type ref to if_salv_wd_column_ref
    lr_column_ref = lr_column_settings->get_column( id =  'FIELD1' ). "Column I want to replace with new value
    lr_column_ref_ref ?= lr_column_ref.
    lr_column_ref_ref->set_text_fieldname( value = 'FIELD2'). "New value column
    Thank you

    Hi Mayank,
    Its easy. Once you obtain the reference of your desired column create an instance of the & then set it to the cell editor. Check the code fragment below:
    data: lr_caption        TYPE REF TO cl_salv_wd_uie_caption.
      LOOP AT lt_columns ASSIGNING <fs_column>.
        CASE <fs_column>-id.
          WHEN 'CHECK'.
             CREATE OBJECT lr_caption.
             lr_caption->set_image_source( value = '~Pictogram/3People' ).
             lr_caption->SET_TEXT( value = 'My Text!' ).
            <fs_column>-r_column->set_cell_editor( lr_caption ).
        ENDCASE.
      ENDLOOP.
    In the snippet above am changing the cell editors of column by name CHECK to contain a pictogram by name "People" & a static text "My Text". So now all my cells under the CHECK column would contain both the pictogram & the text.
    Regards,
    Uday

  • How to get the Row and Column values in ALV (without using Objects)

    Hi All,
    I need to get the Row / Column when double click is used in ALV, I can use the double click event for this. However, I do not want to use the Object Oriented ALV. I want to implement the same functionality using general (using functions) ALV.
    Is there any way to get the row / column values for a Generia (non-OOPs) ALV report.
    Please help.
    Thanks,
    Vishal.

    Hello,
    The only think you have to do is to get the index where the user clicked, and then read the internal table you sent to the alv
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = 'prg_name'
          i_callback_pf_status_set = 'SET_PF_STATUS'
          i_callback_user_command  = 'USER_COMMAND' " this is to the click event!!
          i_callback_top_of_page   = 'TOP_OF_PAGE'
          is_layout                = alv_layout
          it_fieldcat              = alv_fieldcat
          i_save                   = 'A'
          it_events                = alv_events[]
        TABLES
          t_outtab                 = i_totmez.  ---> TOUR IT.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    " then....
    FORM user_commandUSING r_ucomm     TYPE sy-ucomm
                                    ls_selfield TYPE slis_selfield.
    " r_ucomm -> HAS THE STATUS
    " ls_selfield-tabindex  -> HAS THE SELECTED INDEX
    " THEN READ THE INTERNAL TABLE
    " HERE YOU WILL HAVE THE SELECTED ROW
    READ TABLE i_totmez INDEX ls_selfield-tabindex.
    ENDFORM.
    cheers,
    Gabriel P.

  • Want to display more than 300 charcters in a column using ALV grid display

    Hi Guru's,
    I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
    Thanks,
    Radha.

    Hi Paurl,
    Define a work area say
    wa_layout type slis_layout_alv.
    then fill this work area as
    wa_layout-zebra = X
    wa_layout-colwidth_optimize = X.
    wa_layout-max_linesize = 300.
    Then in FM 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    is_layout = wa_layout
    etc.
    you provided this for the field which is displayed in alv grid will have more than 128 characters.
    from this code i want,how it refers to particular field.
    when i mentioned field catalog-OUTPUTLEN = '300'.
    it is not displayed the field morethan 128 characters.
    it only displays 128 characters.
    please provide me clear and breif information with suitable code.
    i am trying what your sending but it is not displayed more than 128 characters.
    if you don't mind please spend for me some time for this and
    give me clear and breif information with suitable code.
    Thanks & Regards,
    Radhakrishna.

  • How to group the column headers using WDA ALV ?

    Hello All.
    How can I group the column headers as shown in the picture(chart), using  WDA  ALV.
    Thanks for any help !
    A
    B
    A1
    A2
    A3
    A4
    B1
    B2
    B3
    B4
    B11
    B12
    B13
    B21
    B22
    B23
    B31
    B32
    B33
    B41
    B42
    B43
    消息编辑者为：Cloud Li

    Hi ,
    This functionality was not exposed/supported in WDP ALV,however the same can be achieved in normal table(table UI element)
    The reason this isn't exposed directly in the ALV is because it is used internally when you do a grouped sort.  The ALV automatically buids group headers to explain the grouped sort/sum.
    Depending upon your requirements if you must have the group header and aren't using much else in the ALV, you might be better off using the plain old table. Below is a link to how to do group headers in the table UI element.
    Table
    Hope this helps you.
    Thanks
    KH

  • How to Display Sub-Columns using ALV Grid

    Hi ,
      Could someone tell me how to display sub-columns under a parent column using ALV Grid. Do we have any standard Program which has this scenario. Please let me know.
    Thanks,
    Abaper.
    Message was edited by:
            ABAP'er

    you can check all with <b>BCALV* or RSDEMO*</b> in SE38 for all Std
    check below
    BCALV_DND_01                   Drag ALV Row to Tree Folder
    BCALV_DND_02                   Drag Icons from Tree to Rows of the Grid
    BCALV_GRID_DND_TREE            ALV Grid: Drag and Drop with ALV Tree
    BCALV_GRID_DND_TREE_SIMPLE     ALV GRID: Drag and drop with ALV tree (simple)
    BCALV_TEST_COLUMN_TREE         Program BCALV_TEST_COLUMN_TREE
    Rewards if useful............
    Minal

  • How can we restrict Column length in ALV using POWL.

    Hello,
    I have a new assignment o ABAP Web Dynpro, data displaying ALV by using POWL is a part of that assignment. Everything went fine and at last moment I was stuck with a small issue. In my application I am displaying first ALV by using POWL concept and on the basis of selected row I am displaying second level LAV by using normal ALV procedure (SALV_WD_TABLE). Here the issue is as soon as second ALV is displaying columns in first level ALV are getting expanded. How can I restrict Column length in first level ALV using POWL. I browsed a lot for getting the solution for this, Can any one help me out from this issue.
    Regards,
    Kumar

    Done, in field catalog method...

  • ALV column displays either button or text ?

    Dear collegues,
    I want to display one column in an ALV table that either displays a button (with a text on it) or displays a text (without button). The decision what of these 2 possibilites is shown should be controlled by the runtime data (eg. the WD context).
    PS: I know how to display one ALV column with only buttons or one ALV column with only text.

    Hi Christian,
    a) Is the command l_cv->set_key( 'TEXT_VIEW' ) still correct to display the icon ?
    yes there is a no show stopper to display icon.since TEXT_VIEW is a string value to populate  text/check box conditionally.
    b) What I fill into the new context field 'CELL_VARIANT' while runtime ? Should it filled with u201CTEXT_VIEWu201D to display the iconand with u201C u201C to display the button ?
    you can give either button or icon to cell_variant.Follow my code as it is .you will get the output.

  • Subtotal text in ALV using OO ALV

    HI All,
    How to display subtotal text in ALV using OO ALV?
    My output of ALV should be as follows
    COL1    COL2   COL3
    ABC      900       M1
    PQR      100       M1
    M1 Subtotal 1000
    XYZ      2100    M2    
    M2 Subtotal 2100
    I could put the subtotal, but couldnu2019t add subtotal text.
    My code
      TRY.
          CALL METHOD cl_salv_table=>factory
            IMPORTING
              r_salv_table   = g_alv
            CHANGING
              t_table        = gt_report
        CATCH cx_salv_msg .
      ENDTRY.
    u2026u2026
    *Display the table.
      g_alv->display( ).

    Hi
    REPORT  z_alv_demo_total_text.
    Type declaration for final table to display the output
    TYPES: BEGIN OF ty_mara,
            srno TYPE char40, " Storing the total text
            matnr TYPE matnr, " Material
            ersda TYPE ersda, " Creation date
            ernam TYPE ernam, " Created by
            laeda TYPE laeda, " Last change date
            aenam TYPE aenam, " Last change by
            vpsta TYPE vpsta, " Maintenance status
            brgew TYPE brgew, " Gross weight
            ntgew TYPE ntgew, " Net weight
            gewei TYPE gewei, " Weight Unit
           END OF ty_mara.
    Type declaration for table storing temp. data
    TYPES: BEGIN OF ty_mara_tmp,
            matnr TYPE matnr, " Material
            ersda TYPE ersda, " Creation date
            ernam TYPE ernam, " Created by
            laeda TYPE laeda, " Last change date
            aenam TYPE aenam, " Last change by
            vpsta TYPE vpsta, " Maintenance status
            brgew TYPE brgew, " Gross weight
            ntgew TYPE ntgew, " Net weight
            gewei TYPE gewei, " Weight Unit
          END OF ty_mara_tmp.
    Internal table for storing final data
    DATA: i_mara TYPE STANDARD TABLE OF ty_mara INITIAL SIZE 0.
    Work area for final table
    DATA: w_mara TYPE ty_mara.
    Internal table for storing temp. data
    DATA: i_mara_tmp TYPE STANDARD TABLE OF ty_mara_tmp INITIAL SIZE 0.
    Work area for temp. table
    DATA: w_mara_tmp TYPE ty_mara_tmp.
    Object variable for ALV grid
    DATA: oref1 TYPE REF TO cl_gui_alv_grid.
    Field catalog table for ALV grid
    DATA: fieldcat TYPE  lvc_t_fcat.
    Workarea for field catalog table
    DATA: w_field TYPE lvc_s_fcat.
    Internal table for storing info. for ALV grid
    data: i_sort2 TYPE STANDARD TABLE OF lvc_s_sort INITIAL SIZE 0.
    Workarea for sort table
    DATA: wa_sort2      TYPE  lvc_s_sort.
    Workarea for ALV layout
    data: wa_layout     TYPE  lvc_s_layo.
    START-OF-SELECTION.
    Fetch data
    SELECT  matnr   " Material
            ersda   " Creation date
            ernam   " Created by
            laeda   " Last change date
            aenam   " Last change by
            vpsta   " Maintenance status
            brgew   " Gross weight
            ntgew   " Net weight
            gewei   " Weight Unit
      FROM mara
      INTO TABLE i_mara_tmp
      UP TO 100 ROWS.
      CHECK sy-subrc = 0.
    Populate final table
      LOOP AT i_mara_tmp INTO w_mara_tmp.
      Storing the Total text need to be displayed in
      ALV
        w_mara-srno = 'Total weight (Gross & Net)'.
        w_mara-matnr = w_mara_tmp-matnr.
        w_mara-ersda = w_mara_tmp-ersda.
        w_mara-ernam  = w_mara_tmp-ernam .
        w_mara-laeda = w_mara_tmp-laeda.
        w_mara-aenam = w_mara_tmp-aenam.
        w_mara-vpsta = w_mara_tmp-vpsta.
        w_mara-brgew = w_mara_tmp-brgew.
        w_mara-ntgew = w_mara_tmp-ntgew.
        w_mara-gewei = w_mara_tmp-gewei.
        APPEND w_mara TO i_mara.
      ENDLOOP.
    Calling the screen to display ALV
      CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
          Display ALV report
    MODULE status_0100 OUTPUT.
      IF oref1 IS INITIAL.
      Create ALV grid object
      In this case we have not created any custom container in the screen,
      Instead of that dummy container name is passed
      ADVANTAGE: we can run this report in background without any problem
        CREATE OBJECT oref1
          EXPORTING
            i_parent          = cl_gui_custom_container=>screen0
          EXCEPTIONS
            error_cntl_create = 1
            error_cntl_init   = 2
            error_cntl_link   = 3
            error_dp_create   = 4
            OTHERS            = 5
        CHECK sy-subrc = 0.
      Preparing the field catalog
      ZDEMO: Defined in DDIC, it's structure is same as TYPE ty_mara
      defined in the program
        CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
          EXPORTING
            i_structure_name       = 'ZDEMO'
          CHANGING
            ct_fieldcat            = fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
        IF sy-subrc = 0.
          LOOP AT fieldcat INTO w_field.
            IF w_field-fieldname = 'BRGEW' OR
              w_field-fieldname = 'NTGEW'.
            Summation for Gross & Net weight
              w_field-do_sum = 'X'.
              MODIFY fieldcat FROM w_field TRANSPORTING do_sum.
            ENDIF.
            IF w_field-fieldname = 'SRNO'.
            Hide this field so that it can display it's content i.e.
            Total text in Subtotal level
              w_field-tech = 'X'.
              w_field-no_out = 'X'.
              MODIFY fieldcat FROM w_field TRANSPORTING tech no_out.
            ENDIF.
            CLEAR w_field.
          ENDLOOP.
        ENDIF.
      Populate Sort table with SRNO field so that we can display the total
      text in it's subtotal level
        wa_sort2-spos = 1.
        wa_sort2-fieldname = 'SRNO'.
        wa_sort2-up = 'X'.
        wa_sort2-subtot = 'X'.
        APPEND wa_sort2 TO i_sort2.
      Hide the total line
        wa_layout-no_totline = 'X'.
      Display the ALV grid
        CALL METHOD oref1->set_table_for_first_display
          EXPORTING
            is_layout                     = wa_layout
          CHANGING
            it_outtab                     = i_mara[]
            it_fieldcatalog               = fieldcat
            it_sort                       = i_sort2
          EXCEPTIONS
            invalid_parameter_combination = 1
            program_error                 = 2
            too_many_lines                = 3
            OTHERS                        = 4.
        IF sy-subrc <> 0.
        ENDIF.
      Set the focus on the grid
        CALL METHOD cl_gui_alv_grid=>set_focus
          EXPORTING
            control           = oref1
          EXCEPTIONS
            cntl_error        = 1
            cntl_system_error = 2
            OTHERS            = 3.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    These will defintely help  in u displaying subtotal text check it
    thanks

Maybe you are looking for