Communicating message processing errors to trading partner
Hi,
We have configured B2B to receive OAG inbound messages.
How can we communicate inbound message processing errors to the remote trading partner?
I found that we can use oag CONFIRM_BOD_004 message for that? How do we that? Do we need to create a separate agreement with the trading partner for the confirm_bod or is there any way to bind it to existing agreement?
Is CONFIRM_BOD_004 the only way of informing the trading partner or there are some other ways of doing it?
Thanks in Advance.
Anil
Hi Anil,
Oracle B2B can send two kind of acknowledgements to partner to intimate whether received message processed successfully -
1. Exchange level ack - This is supported with specific exchange protocols (AS2, ebMS, RNIF etc.) only. Generic exchange does not have this capability. To understand, how it behaves in case of inbound error, please refer section "D.5 Inbound Exception Handling Scenarios" at-
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/app_except.htm#BCEIEEFF
2. Functional Ack - This is supported as part of document protocol's specification. For e.g. 997 in EDI X12, CONTRL in EDIFACT and CBOD (Confirm BOD) in OAG. Oracle B2B can handle Functional ACK automatically but you have to create a document definition for the same and deploy the respective agreement. Remember, Functional Ack is generally used to communicate to partner whether received message passed the business validation.
You may refer below blog to understand difference between functional ack and exchange ack -
http://www.b2bgurus.com/2009/02/document-vs-exchange-level.html
Remember that this blog is intended for 10g so please ignore any settings defined there.
You may define at an agreement level whether FA is required and if yes then whether Oracle B2B will handle it or middleware will send it to B2B to pass it to TP. You may refer section "Step 4: Select validation, translation, and functional acknowledgment options" at -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/bb_agree_flow.htm#CEGDGCAH
Regards,
Anuj
Similar Messages
-
B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
KenKen,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work. -
EDIFACT D98A Inbound Message Processing Error
Hi
I have been setting up an EDI B2B G/W using 11g B2B PS3 (Host & Partner). I have created the ECS, XSD and XML files using the B2B Document Editor and have completed the partner setup for D98A Purchase Order.
I had the issues when I posted the PO where the Host is unable to pick up the agreements and I was getting B2B-51507 Payload Validation Error and the message was failling at the B2B Host.
Later I changed the payload in-line with the below thread and removed the Internal Properties
https://forums.oracle.com/forums/thread.jspa?messageID=11039032#11039032
upon which the messages was sent to RemoteTP but failed with B2B-50037: B2B inbound message processing error
When I analyzed further I could see the InternalPropertes sent by the Host to the RemoteTP are with empty values.
I would like to understand the point of removing the InternalProperties and why B2B Host is not sending it in the right format to the other B2B.
I am pasting the file that is been received at the RemoteTP which failed with B2B-50037: B2B inbound message processing error
<?xml version="1.0" encoding="UTF-8"?><Transaction-CONTRL xmlns="urn:oracle:integration:b2b:9FF110DDDB0C424F8B4C5A0F73EF6547" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="EDIFACT" Version="D3" CreatedDate="2013-05-31T13:41:20" CreatedBy="XEngine_2133" GUID="{65236268-C9EF-11E2-BC04-E4115BAD2692}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">1</Lookup><Lookup Name="InterchangeReceiverID"> </Lookup><Lookup Name="InterchangeReceiverQual"></Lookup><Lookup Name="InterchangeSenderID"> </Lookup><Lookup Name="InterchangeSenderQual"></Lookup><Lookup Name="Standard">EDIFACT</Lookup><Property Name="InterchangeSyntaxVersion">1</Property><Property Name="ReleaseCharacter">0x3f</Property><Data-Structure Name="Group"><Lookup Name="GroupID">CONTRL</Lookup><Lookup Name="GroupReceiverID"> </Lookup><Lookup Name="GroupReceiverQual"></Lookup><Lookup Name="GroupReleaseNumber">3</Lookup><Lookup Name="GroupSenderID"> </Lookup><Lookup Name="GroupSenderQual"></Lookup><Lookup Name="GroupVersion">D</Lookup><Property Name="GroupID">CONTRL</Property><Data-Structure Name="Transaction"><Lookup Name="TransactionID">CONTRL</Lookup><Lookup Name="TransactionMessageReleaseNumber">3</Lookup><Lookup Name="TransactionMessageVersionNumber">D</Lookup></Data-Structure></Data-Structure></Data-Structure></Internal-Properties><Segment-UNH><Element-0062>#ControlNumber(Transaction)#</Element-0062><Composite-S009><Element-0065>CONTRL</Element-0065><Element-0052>D</Element-0052><Element-0054>3</Element-0054><Element-0051>UN</Element-0051></Composite-S009></Segment-UNH><Segment-UCI><Element-0020>1051</Element-0020><Composite-S002><Element-0004> </Element-0004></Composite-S002><Composite-S003><Element-0010> </Element-0010></Composite-S003><Element-0083>4</Element-0083></Segment-UCI><Loop-Group_3><Segment-UCF><Element-0048>1051</Element-0048><Composite-S006><Element-0040> </Element-0040></Composite-S006><Composite-S007><Element-0044> </Element-0044></Composite-S007><Element-0083>4</Element-0083></Segment-UCF><Loop-Group_4><Segment-UCM><Element-0062>1</Element-0062><Composite-S009><Element-0065>ORDERS</Element-0065><Element-0052>D</Element-0052><Element-0054>98A</Element-0054><Element-0051>AA</Element-0051></Composite-S009><Element-0083>4</Element-0083><Element-0085>18</Element-0085></Segment-UCM></Loop-Group_4></Loop-Group_3><Segment-UNT><Element-0074>5</Element-0074><Element-0062>#ControlNumber(Transaction)#</Element-0062></Segment-UNT></Transaction-CONTRL>
Has anyone encountered such issues? Is there any additional properties that are needed to be configured?
Regards
RDHi Anuj
this is the stack trace
<02-Jun-2013 12:50:47 o'clock BST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-50037: B2B inbound message processing error
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3283)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1764)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4179)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3855)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3328)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:610)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:192)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
the xml i posted is the one that is logged by the remote TP in the trace logs before the error occurrence,
Regards
RD -
B2B-50037: B2B inbound message processing error
We are trying to implement B2B with Customer EDI X12 850 Inbound with SOA
Application server Version 11.1.1.4.0 (weblogic)
Hitting the following error in the logs
MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/8504010Viterra.ecs"
Was successful in overcoming all the usual obstacles of finding the TP, Document Type, protocol etc...However hitting the above error. 8504010Viterra.ecs is a custom spec builder document we created and "8504010Viterra.ecs" was browsed from the windows PC into the Document Type B2B set up. I am willing to use a seeded ecs file but do not know how to find one for X12 850 4010 version....?
Went through one SR that asks you upload a group ECS file but that did not help in our case....Following was the SR
"B2B-50037 B2B INBOUND MESSAGE PROCESSING" Error with EDIX12 And DEF 830 VER 200\0 [ID 1357136.1]
Please help
Now at the agreement level, if we set the translate to No and Validate to No then B2B completes normally but we do want B2B to translate the file so that we can get it in XML form for us to transform and process it in BPEL
Any help or hint is really appreciated!Anuj
THANK YOU SO MUCH!!! I cannot thank you enough for this
I was playing around so much with the document type, the protocol version etc. that i must have inadvertently messed up the repository. I took the export of the data as you suggested, purged the design repository and reimported the zip. I also had to restart the server since the ftp was not kicking in...& wholla! the message got translated into XML and went into the queue
Thanks again
Gopal Iyer
Edited by: ghiyer on Nov 10, 2011 10:07 AM -
B2B-50037: B2B inbound message processing error java.lang.NullPointerException
Can anyone help me with this problem.
I'm new here.
Oracle SOA Server version 11.1.1.6.0
Got this error message after I put Ignore Correlation true.
diagnostic.log:
[2013-08-12T14:05:26.668+02:00] [MS_KETEN_SOA_01] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Engine: processIncomingMessageImpl: Message id = 0A253556140726AA60A000003E11ADD0-1 FromParty = JD0021_OTA Doctype = ScanDocumenten version = 1.0
[2013-08-12T14:05:26.712+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] [[
at oracle.tip.b2b.msgproc.Acknowledgment.createAckMsg(Acknowledgment.java:659)
at oracle.tip.b2b.msgproc.Acknowledgment.asyncOutgoingAck(Acknowledgment.java:290)
at oracle.tip.b2b.msgproc.Request.handleAck(Request.java:652)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3019)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2013-08-12T14:05:26.720+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)It is a Defect 17324828 has been created. Details for this defect maybe viewed in Oracle Support Portal , we will update you the status as soon as we have more information.
I found ,Bug 16713853 : BTMLR: IGNORE CORRELATION AS TRUE IN ADMIN COFIGURATION GIVES NULLPOINTER ERROR for this issue in 11G , As of now development team is still working to fix this , i will raise a New BUG and involve development team for this issue -
B2B SelfService Error creating Trading Partner .zip import file using ant
SOA 11g 11.1.1.5 B2B - We are trying to create an import file for out trading partners into SOA B2B 11g but are getting errors when we run the ant script to build the import zip file.
We ran the ant-b2b-util to get the b2bselfservice.xsd file, loaded that into jDev to show the selfservice.xml structure.
We have built a trading partner xml file and at this point have stripped it down to one TP just to see if we could get it to work and we keep getting the same error messages.
From the $SOA_ORACLE_HOME/bin directory (where we have placed our TP xml file: TPD_NA.xml) here is the command and results from running the ant script:
[oracle@nalinoap05 bin]$ ant -f ant-b2b-util.xml b2bselfservice -Dinput=$ORACLE_HOME/bin/TPD_NA.xml -Doutput=$ORACLE_HOME/bin/TP_Docs.zip
Buildfile: ant-b2b-util.xml
b2bselfservice:
weblogic_dependencies:
[echo]
[echo] Weblogic server location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/wlserver_10.3
[echo] JNDI properties folder location: /oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin
[echo]
verifyargs:
utility:
[echo]
[echo] java.naming.provider.url=${java.naming.provider.url}
[echo] java.naming.factory.initial=${java.naming.factory.initial}
[echo] java.naming.security.principal=${java.naming.security.principal}
[echo] java.naming.security.credentials=*****
[echo]
[echo]
[echo] args=selfservice
[echo]
[java] Commandline arguments 1: [selfservice]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Input file location(s) :[oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TPD_NA.xml]
[java] 2012.04.10 at 13:27:35:559: main: (INFO) Output file location :/oracle/SOAWDEV/11.1.1.5/Oracle/Middleware/Oracle_SOAWDEV/bin/TP_Docs.zip
[java] 2012.04.10 at 13:27:35:596: main: (INFO) TradingPartner created :/soa/b2b/tp_id1AC191488133.xml
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=852 docDef=852Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:600: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=850 docDef=850Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=860 docDef=860Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=4010VICS docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=864 docDef=864Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:601: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=997 docDef=997Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=856 docDef=856Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:602: main: (SEVERE) TPD_NA.xml: Combination of Documentprotocol=EDI_X12 docVersion=5010 docType=810 docDef=810Def not found in doc_*.xml file
[java] 2012.04.10 at 13:27:35:691: main: (SEVERE) TPD_NA.xml: Error in Validation:
[java] [org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef',
org.xml.sax.SAXParseException: XML-24536: (Error) Missing Attribute 'documentDefinitionRef']
[java] Java Result: 255
BUILD SUCCESSFUL
Total time: 1 second
Here is the contents of TPD_NA.xml:
<?xml version="1.0" encoding="UTF-8"?>
<SelfService xmlns="http://xmlns.oracle.com/integration/b2b/selfservice/profile">
<TradingPartners>
<TradingPartner hosted="false" name="OvvvvvvvX" >
<Identification name="EDI Interchange ID" value="18xxxxxxxxxX" />
<Identification name="EDI Interchange ID Qualifier" value="14" />
<Identification name="DUNS" value="18xxxxxxxxxX" />
<Identification name="Generic Identifier" value="18xxxxxxxxxX" />
<Identification name="AS2 Identifier" value="18xxxxxxxxxX" />
<SupportedDocumentDefinition initiator="true" docTypeName="852" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="852Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="4010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="850" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="850Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="860" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="860Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="4010VICS" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="864" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="864Def" />
<SupportedDocumentDefinition initiator="true" docTypeName="997" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="997Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="856" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="856Def" />
<SupportedDocumentDefinition initiator="false" docTypeName="810" docProtocolVersion="5010" docProtocolName="EDI_X12" docDefName="810Def" />
</TradingPartner>
</TradingPartners>
</SelfService>
We have exported our metadata and looked at the doc_EDI_X12.xml file and ALL of these referenced documents exist in that file and can be seen by going to Administration --> Document and under the Document Protocols navigation --> EDI_X12 --> 5010 --> 810 --> 810Def (as an example).
If we strip out all of the SupportedDocumentDefiinition lines then the ant script will build an import file with just the trading partners and Identifications.
What are we doing incorrectly or what is not working properly to get the ant script to build the import zip file??
Thanks for any assistance,
KenDoes that mean we have to create all of the document type definitions in the selfservice file?
We have created (installed) all of the document types by installing them from the B2B Administration --> Document page.
The definitions in the Trading Partner xml file exactly match the definitions of the installed documents.
In the selfservice.xsd the <element> SelfService shows the profile:DocumentProtocols as minOccurs as 0 :
<element name="SelfService">
<complexType>
<sequence>
<element minOccurs="0" maxOccurs="1"
ref="profile:DocumentProtocols" />
<element minOccurs="0" maxOccurs="1"
ref="profile:TradingPartners" />
<element minOccurs="0" maxOccurs="1"
ref="profile:Agreements" />
</sequence>
<attribute name="version" type="profile:non-empty-string"
use="optional" />
</complexType>
</element>
so we thought that since the documents had already been defined (created/installed) to B2B they would not have to be redefined in the selfservice xml.
If we have to define all of the document types in the selfservice xml file that we are using for the trading partners what are the minimum values that we need to include?
Could we use minimal definitions such as this:
<DocumentProtocols>
<DocumentProtocol name="EDI_X12">
<DocumentProtocolVersion name="4010">
<DocumentType name="850">
<DocumentDefinition name="850def" />
</DocumentType>
<DocumentType name="997">
<DocumentDefinition name="997def" />
</DocumentType>
</DocumentProtocolVersion>
</DocumentProtocol>
</DocumentProtocols>
before the <TradingPartners> section of the seflxervice xml file?
Thanks for your assistance! -
Message VL864 Error during copy partner: SP
Hi
When I try to create a delivery note for project in transaction CNS0,
I receive the below error
VL864 Error during copy of partner: Patner role SP..
The ship to party is connected to a SP both in the project and in the
customer master data.
Thank you in advance for your kind help.
Best Regards
CarinaHI
Check the Below Link
[Re: Delivery from PS (CNS0) - Error Message VL864 |Delivery from PS (CNS0) - Error Message VL864;
Regards,
Prasanna -
Large message processing error
We are getting the error detailed below when trying to process a message of size 280MB.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.services.httpserver.exceptions.HttpIOException: Read timeout. The client has disconnected or a synchronization error has occurred. Read [41262553] bytes. Expected [298803048]. at com.sap.engine.services.httpserver.server.io.HttpInputStream.read(HttpInputStream.java:186) at com.sap.aii.af.service.util.ChunkedByteArrayOutputStream.write(ChunkedByteArrayOutputStream.java:181) at com.sap.aii.af.ra.ms.transport.TransportBody.<init>(TransportBody.java:99) at com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet.doPost(MessagingServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description Internal Server Error Error while sending by HTTP (error code: 500, error text: Internal Server Error)</SAP:Stack>
Can anyone help me with this error.refer this link, it may give u some idea..
http://help.sap.com/bp_bpmv130/Documentation/Planning/XISizingGuide.pdf
Thanks
Farooq. -
Hi
I am doing an Idoc to File. The same Idoc is triggered to two receiving interfaces, which are both File. I copied the message from the Test tab of Message Mapping in IR and pasted in Runtime work Bench , Integratioon Engine test message tab.
I get a message " Scheduled for outbound processing " for both my receiver interfaces.
How do I figure out the errror ?
RegardsHi Ajith,
Are you using the different conditions in the receiver determination?
If yes, then please check those conditions.
-Supriya. -
PO message processing error at SOAP Adapter
Hello All,
After an PO scenarion setup and performing one messageprocessing in found following error at RW Message Monitoring:
Exception caught by adapter framework: SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException - com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#13 $) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:412) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_
Please could someone tell me where the problem is?
Regards,
JochenHi Jochen
Check if thse threads can help you
Now based on error description -
Refer this SAP Note - 856597 QUestion no 1 -for SOAP adapter configuration- i.e URL
Also have a look into this thread-
SOAP Problem
SOAP Error when testing messages.
*************Reward points if helpfull************* -
Hi,
I am getting following error validating trading partner. I have double checked the TP setup, everything looks fine. I had earlier successfully validated, later added a document type and trying to re-validate.
AIP-11052: Writing following objects: Trading Partner failed due to following constraint violation: PARTY. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
Does anyone have any clues??
Thanks
VenkatMake sure you do not have active configuration which is using this agreement.
-
ICR Process 2 - Parallel Recon by Trading Partner (TP) and TP Profit Center
Experts,
At my current implementation, I would like to reconcile accounts (Process 2) by trading partner, and also by trading partner profit center, essentially reconciling the same data for a period in two different ways. Instead of reconciling data the first way and then backing up the period, and reconciling the second in ICR; is it possible to run two different special reconciliation ledgers for Process two and use one to reconcile with a set of rules for trading partner and the second to reconcile with a set of rules for trading partner profit center? It appears I could create a reconciliation process 4 in the FBIC010 & FBRC7 and assign a secondary special ledger to it, but how would ICR know to look for the right recon ledger when you run FBICA2 and FBICR2?
Does anyone have experience and can chime in on this scenario?
Please Advise
Thanks!
John ScimeI needed to update the field movement in the reconcilation ledger.
The hierarchy with TP PC is showing up now but some documents are not appearing in the reconciliation display. I am going to delete the transactional data index tables and post fresh. I think that will solve the display issue as it has in the past.
I am using two sets one for all Intercompany Accoutns in the reconcilation ledger, and another for all profit centers. I am matching the sets against themselves for the object groups (ie compare all accounts against all accounts...all PC against all PC)
Is there anythign i should investigate Link[Take at the InterCo PC Recon Here|http://img717.imageshack.us/i/26681721.png/]
Link[Look at the Accounts Recon Here|http://img443.imageshack.us/i/85219511.png/]
Thanks,
John Scime
Edited by: John Scime on Jul 14, 2010 6:25 PM -
Trading partner agreement not found for the given input values
Hi,
I am working on EDI X12 over generic exchange outbound.
In enqueue script:
replyToMsgID =
from =TEE
to =RF
actionName =BASFEDI841
doctypeName =841
doctypeRevision =4010
msgType =1
payload =RF_841_4010_1_12.xml
attachment=
I am getting the Trading partner agreement not found.
B2B log:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: FTP
Unique Message ID: TEE_2009Mar01_15_37_29_170.dat
Trading Partner: RF
Message Signed: No
Payload encrypted: No
Information incomplete
2009.03.01 at 15:37:29:477: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Exit
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:29:478: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2009.03.01 at 15:37:32:910: Thread-21: B2B - (DEBUG)
Protocol = FTP
Version = 1.0
Transport Header
filename:TEE_2009Mar01_15_37_29_170.dat
filesize:7787
file_ext:dat
fullpath://users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat
timestamp:1970-01-01T00:00:00.000-00:00
2009.03.01 at 15:37:32:973: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2009.03.01 at 15:37:32:998: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2009.03.01 at 15:37:32:999: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2009.03.01 at 15:37:33:005: Thread-21: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:012: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:014: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2009.03.01 at 15:37:33:014: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2009.03.01 at 15:37:33:019: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2009.03.01 at 15:37:33:020: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2009.03.01 at 15:37:33:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2009.03.01 at 15:37:33:028: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@8a2023
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {FTP}
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = TEE_2009Mar01_15_37_29_170.dat
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = FROM_PARTY - TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage File TP Host name = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2009.03.01 at 15:37:33:058: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2009.03.01 at 15:37:33:063: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor enter
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor edi = X12
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor segment delimiter is 27
2009.03.01 at 15:37:33:073: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument preprocess result =
ISA~00~Authorizat~00~Security I~01~Interchange Sen~01~Interchange Rec~090301~1935~U~00401~000001101~0~I~+'GS~SP~Application Sen~Application Rec~20090301~1537~1101~T~004010'ST~841~5709'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~773~1~AA~0001'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'NTE~AAA~Description'X1~C~Export Licen~C~~1~1~COU~SCHEDULE B~D~252876~59154.0269~A~01~8~U~Identification Code'X2~Import License Number~~20090301~~20090301~20090301'X7~Free-Form Message~Free-Form Message'AMT~1~1~C'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'HL~1~~1~0'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~4~1~AA~0001'RDT~A~Revision Value~001~~~01'PRR~Assigned Identificat~10~Source Subquali~BRK~Description~10~Source Subquali~A~10~Source Subquali~1'PRT~EXC~10~Source Subquali~N'PRS~1~Description'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'MSG~Free-Form Message Text~AA~3'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N9~01~Reference Identification~Free-form Description~~~01~01+Reference Identification+01+Reference Identification+01+Reference Identification'PID~F~01~10~Product Desc~Description~1S~Source Subquali~N~LAN'PKD~AMM01~Source Subquali~10~Packagi~L'QTY~01~1~01+3+60.42665+01+5+3+01+1+51887.5+01+6+7.79+01+2+3953.97808'MEA~9L~1~6~01+5+56318.8+01+1+30.72+01+1+1+01+7+8887.19467+01+6+661.97698~6~7~01~~1S~BM'MEA~9L~1~5~01+3+696.4+01+4+4+01+3+1221.27922+01+1+994232.001+01+3+872.859~3~9~01~~1S~BM'MEA~9L~1~3~01+8+8+01+1+7.75+01+2+6.395+01+1+2.1+01+6+7.59~6~4~01~~1S~BM'MEA~9L~1~6~01+6+7393.71+01+3+54258.8579+01+8+28012.940+01+5+8+01+7+8.8~9~9~01~~1S~BM'MEA~9L~1~8~01+5+8661152.98+01+7+6356848.72+01+7+1010847.39+01+5+4939.33859+01+3+7.84050~8~4~01~~1S~BM'UIT~01+7+8.3+01+2+8.702047+01+8+323.16049+01+8+40699.4+01+5+30.909~1~AA'LOC~01~Reference Identification~Description~Reference Identification~Catego~01~Reference Identification~Description~Reference Identification~6~01+7+257.30155+01+1+963640.085+01+1+9.42+01+4+1+01+3+67.61~8~01+6+3.6+01+2+20.5+01+4+6.99+01+7+5+01+5+213.507492~5~01+2+3077486.5+01+7+78023.621+01+3+6.74+01+7+138554.0+01+3+4111.4~2~01+9+2.6+01+8+91290.0173+01+9+1.9+01+2+6.168+01+1+26.9~2~01+2+1+01+6+67348.246+01+4+8.50+01+7+37.63+01+5+130691508.0~1~01+5+8.39+01+1+2.0+01+6+7.3+01+5+173.68084+01+5+550.4928~01~Reference Identification~Description'PWK~01~1~26~01~1~Identification Code~Description~1+1+1+1+1~AR'PKG~F~01~10~Packagi~Description~01'MEA~9L~1~6~01+9+99.2217+01+5+6.5043+01+8+30.76+01+9+3+01+1+7~3~2~01~~1S~BM'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'LX~6'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'MEA~9L~1~4~01+7+71.1+01+2+277.0+01+2+9.19003+01+1+901.516+01+3+7803582.87~8~7~01~~1S~BM'PSD~01~01~9661549~01+2+140318.0112+01+3+30.74740+01+9+67.17+01+7+5.1130+01+3+56743.0~01~01~01~Description'SPS~193487350~66823328~472426~5.6~01+3+519.45554+01+6+145146.03+01+2+63994262.5+01+3+1.3166+01+8+4.7~440443'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~7~84410~Version Identifier~ASB'BIN~3~hii'CID~1~01~10~Product Desc~Description~Source Subquali~N'UIT~01+6+940.5+01+3+4.7+01+9+3.1+01+6+58.1+01+2+115728.9010~3~AA'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'PSD~01~01~595~01+1+5.139+01+3+1+01+5+4+01+5+19.1+01+5+3441.57231~01~01~01~Description'CSS~GC~01+1+33832819.6+01+1+1.5332+01+5+1.1+01+1+12173.83+01+5+813.282453~874~27~1~2~38'SPS~9~1154210~75~9.5~01+2+473.9+01+5+28.394421+01+6+755.69932+01+3+8407.2+01+3+1~54261910'MSG~Free-Form Message Text~AA~66511'MEA~9L~1~3~01+6+4.979+01+8+60.167241+01+8+48.03003+01+1+1.6086+01+5+2417168.92~3~1~01~~1S~BM'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'STA~01~9~01+6+66133.5+01+1+1+01+6+45813032.4+01+3+3329.6+01+7+63878.29~1~9L~3~5~01'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'CRF~01+6+7050.3+01+3+892.07605+01+6+847.7520+01+7+4+01+4+1.7~59.926'LS~CID'CID~1~01~10~Product Desc~Description~Source Subquali~N'MEA~9L~1~1~01+2+316324.35+01+8+852.8+01+7+4.2+01+8+6.3+01+7+9.3~2~4~01~~1S~BM'STA~01~6~01+2+751.60984+01+2+5+01+7+60.63+01+3+5366069.5+01+7+1.891~1~9L~1~8~01'LE~CID'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~2~64~Version Identifier~ASB'BIN~3~hii'SE~91~5709'GE~1~1101'IEA~1~000001101'.... b2b.log:
2009.03.01 at 15:37:33:077: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2009.03.01 at 15:37:33:079: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@43da1b
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.03.01 at 15:37:33:107: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderID Val = Interchange Sen
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderQual Val = 01
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode standard = X12
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverID Val = Interchange Rec
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeControlVersion Val = 00401
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverQual Val = 01
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupSenderID Val = Application Sen
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 004010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 4010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupReceiverID Val = Application Rec
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Transaction Count = 1
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode DocType = 841
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverQual = 01
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderID = Interchange Sen
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverID = Interchange Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupReceiverID = Application Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeControlVersion = 00401
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = Application Sen
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderQual = 01
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument exit
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Exit
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage number of b2b messages 1
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processIncomingTPA() Begin TPA Processing..
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is incoming
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2009.03.01 at 15:37:33:116: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: TEE Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:120: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: 841 docTypeRevision: 4010
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: BARFEDI841 actionRevision: 1.0
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : BARFEDI841 Activity Version: 1.0
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<BARFEDI841>
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2009.03.01 at 15:37:33:136: Thread-20: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: TEE Type: null Value: null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-TEE-null To Party -> null-null-TEE-null Business Action name -> BARFEDI841
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() fromParty: TPName: TEE Type: null Value: null toParty: TPName: TEE Type: null Value: null initiatingParty: TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() SELECT ag.name FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND ba1.revision = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND ba2.revision = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() bind vars: TEE,BARFEDI841,1.0,Y,TEE,BARFEDI841,1.0,N
2009.03.01 at 15:37:33:145: Thread-20: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.03.01 at 15:37:33:145: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage B2BDE
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=TEE_2009Mar01_15_37_29_170.dat, filesize=7787, file_ext=dat, fullpath=//users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat, timestamp=1970-01-01T00:00:00.000-00:00}
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2009.03.01 at 15:37:33:155: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2009.03.01 at 15:37:33:171: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name TEE
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2009.03.01 at 15:37:33:196: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name BARFEDI841 BusinessAction_0E95
2009.03.01 at 15:37:33:207: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.01 at 15:37:33:217: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = TEE_2009Mar01_15_37_29_170.dat@0A4DBD5D11FC2AEDA770000018E26600
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.01 at 15:37:33:232: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD5D11FC2AEDA680000018E265F0</b2bMessageId>
<errorCode>AIP-50547</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.TEEis.com)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2009.03.01 at 15:37:33:246: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:264: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit -
Validation Rule for trading partner
Frnds
I am writing validation for trading parter with below details.
Prerequsite
BSEG-HKONT IN ZIC_ACCT
Check
BKPF-AWTYP = 'BKPF' AND BSEG-VBUND <> ''
Error
Specify Trading Partner for intercompany accounts
I have created above validation at call up point 2 at line item level
so when i go to post docuemnt at FB50 and select the GL account from set ZIC_ACCT, it issues error that i have to put the trading partner, but as soon as i put the trading partner, it should allow me to save the document, but it does not. infact it again issues error that i need to put the trading partner.
so can someone please look into it and let me know if i can writer validation for Trading parter or not?
ThanksHi,
You can do as per following:
Prerequisite:
BKPF-BUKRS = 'company code' AND
BSEG-HKONT = 'GL Account' OR AND BKPF-TCODE <> 'FB50'
Check
BSEG-VBUND <> ''
Message
Enter Trading Partner for GL Account &1
Message type - E
Message no. = XXX
message variables BSEG-HKONT
Regards,
Santosh -
Hi Gurus,
I want to create validation with the help of which system will give error message if i enter trading partner 1000 and profit center 1000, while doing posting through FB50.
Please help me in doing this.
Thank Youhi
you have to use
GGB0
create New validation for Line items
Prerequisite will be your Transaction code
Check will be your Profit center
Maybe you are looking for
-
Help! itunes will only play one song at a time
My itunes is acting screwy. I open a playlist and play the first song, and itunes only plays that song. it won't keep going forward. it doesn't freeze up; i just have to manually play the next song. this just started yesterday with no adjustments, ne
-
How do I see the Rewritten sql in 8i
I would like to be able to see the sql produced by a re-written query. We are using database 8.1.6.2. We have created a materialized view based on prebuilt table based on months. We have a dimension for our calendar that rolls up months to quarters a
-
How do I install nvidia drivers in ubuntu for my 2013 27 inch iMac??
I have the 1gb nvidia 675mx 27 inch model of the new imac. I am triple booting ubuntu, windows 7 and OSX fine and I can boot into linux normally but I am running off the open source 2d drivers that come with ubuntu. I tried to switch to the propietar
-
Can't get master and subpages to show in PDF doc
I have created a PDF doc and revised it in Adobe LiveCycle. I can see the pages in LiveCycle, but when I PDF the doc it just shows one page. Please advise.
-
Automatic scheduling of report and send the output to user via email
Good Morning, Please i need to scheduled report and send the output via email in Discoverer . Please can someone assist in how to achieve this ?