Message processing error
Hi
I am doing an Idoc to File. The same Idoc is triggered to two receiving interfaces, which are both File. I copied the message from the Test tab of Message Mapping in IR and pasted in Runtime work Bench , Integratioon Engine test message tab.
I get a message " Scheduled for outbound processing " for both my receiver interfaces.
How do I figure out the errror ?
Regards
Hi Ajith,
Are you using the different conditions in the receiver determination?
If yes, then please check those conditions.
-Supriya.
Similar Messages
-
B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
KenKen,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work. -
B2B-50037: B2B inbound message processing error
We are trying to implement B2B with Customer EDI X12 850 Inbound with SOA
Application server Version 11.1.1.4.0 (weblogic)
Hitting the following error in the logs
MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/8504010Viterra.ecs"
Was successful in overcoming all the usual obstacles of finding the TP, Document Type, protocol etc...However hitting the above error. 8504010Viterra.ecs is a custom spec builder document we created and "8504010Viterra.ecs" was browsed from the windows PC into the Document Type B2B set up. I am willing to use a seeded ecs file but do not know how to find one for X12 850 4010 version....?
Went through one SR that asks you upload a group ECS file but that did not help in our case....Following was the SR
"B2B-50037 B2B INBOUND MESSAGE PROCESSING" Error with EDIX12 And DEF 830 VER 200\0 [ID 1357136.1]
Please help
Now at the agreement level, if we set the translate to No and Validate to No then B2B completes normally but we do want B2B to translate the file so that we can get it in XML form for us to transform and process it in BPEL
Any help or hint is really appreciated!Anuj
THANK YOU SO MUCH!!! I cannot thank you enough for this
I was playing around so much with the document type, the protocol version etc. that i must have inadvertently messed up the repository. I took the export of the data as you suggested, purged the design repository and reimported the zip. I also had to restart the server since the ftp was not kicking in...& wholla! the message got translated into XML and went into the queue
Thanks again
Gopal Iyer
Edited by: ghiyer on Nov 10, 2011 10:07 AM -
B2B-50037: B2B inbound message processing error java.lang.NullPointerException
Can anyone help me with this problem.
I'm new here.
Oracle SOA Server version 11.1.1.6.0
Got this error message after I put Ignore Correlation true.
diagnostic.log:
[2013-08-12T14:05:26.668+02:00] [MS_KETEN_SOA_01] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Engine: processIncomingMessageImpl: Message id = 0A253556140726AA60A000003E11ADD0-1 FromParty = JD0021_OTA Doctype = ScanDocumenten version = 1.0
[2013-08-12T14:05:26.712+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] [[
at oracle.tip.b2b.msgproc.Acknowledgment.createAckMsg(Acknowledgment.java:659)
at oracle.tip.b2b.msgproc.Acknowledgment.asyncOutgoingAck(Acknowledgment.java:290)
at oracle.tip.b2b.msgproc.Request.handleAck(Request.java:652)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3019)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
[2013-08-12T14:05:26.720+02:00] [MS_KETEN_SOA_01] [ERROR] [] [oracle.soa.b2b.engine] [tid: DaemonWorkThread: '17' of WorkManager: 'wm/SOAWorkManager'] [userId: <anonymous>] [ecid: 0000K1mQe8WAdL9_rdH7iY1I2CVn0000Lc,0] [APP: soa-infra] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)It is a Defect 17324828 has been created. Details for this defect maybe viewed in Oracle Support Portal , we will update you the status as soon as we have more information.
I found ,Bug 16713853 : BTMLR: IGNORE CORRELATION AS TRUE IN ADMIN COFIGURATION GIVES NULLPOINTER ERROR for this issue in 11G , As of now development team is still working to fix this , i will raise a New BUG and involve development team for this issue -
EDIFACT D98A Inbound Message Processing Error
Hi
I have been setting up an EDI B2B G/W using 11g B2B PS3 (Host & Partner). I have created the ECS, XSD and XML files using the B2B Document Editor and have completed the partner setup for D98A Purchase Order.
I had the issues when I posted the PO where the Host is unable to pick up the agreements and I was getting B2B-51507 Payload Validation Error and the message was failling at the B2B Host.
Later I changed the payload in-line with the below thread and removed the Internal Properties
https://forums.oracle.com/forums/thread.jspa?messageID=11039032#11039032
upon which the messages was sent to RemoteTP but failed with B2B-50037: B2B inbound message processing error
When I analyzed further I could see the InternalPropertes sent by the Host to the RemoteTP are with empty values.
I would like to understand the point of removing the InternalProperties and why B2B Host is not sending it in the right format to the other B2B.
I am pasting the file that is been received at the RemoteTP which failed with B2B-50037: B2B inbound message processing error
<?xml version="1.0" encoding="UTF-8"?><Transaction-CONTRL xmlns="urn:oracle:integration:b2b:9FF110DDDB0C424F8B4C5A0F73EF6547" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="EDIFACT" Version="D3" CreatedDate="2013-05-31T13:41:20" CreatedBy="XEngine_2133" GUID="{65236268-C9EF-11E2-BC04-E4115BAD2692}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">1</Lookup><Lookup Name="InterchangeReceiverID"> </Lookup><Lookup Name="InterchangeReceiverQual"></Lookup><Lookup Name="InterchangeSenderID"> </Lookup><Lookup Name="InterchangeSenderQual"></Lookup><Lookup Name="Standard">EDIFACT</Lookup><Property Name="InterchangeSyntaxVersion">1</Property><Property Name="ReleaseCharacter">0x3f</Property><Data-Structure Name="Group"><Lookup Name="GroupID">CONTRL</Lookup><Lookup Name="GroupReceiverID"> </Lookup><Lookup Name="GroupReceiverQual"></Lookup><Lookup Name="GroupReleaseNumber">3</Lookup><Lookup Name="GroupSenderID"> </Lookup><Lookup Name="GroupSenderQual"></Lookup><Lookup Name="GroupVersion">D</Lookup><Property Name="GroupID">CONTRL</Property><Data-Structure Name="Transaction"><Lookup Name="TransactionID">CONTRL</Lookup><Lookup Name="TransactionMessageReleaseNumber">3</Lookup><Lookup Name="TransactionMessageVersionNumber">D</Lookup></Data-Structure></Data-Structure></Data-Structure></Internal-Properties><Segment-UNH><Element-0062>#ControlNumber(Transaction)#</Element-0062><Composite-S009><Element-0065>CONTRL</Element-0065><Element-0052>D</Element-0052><Element-0054>3</Element-0054><Element-0051>UN</Element-0051></Composite-S009></Segment-UNH><Segment-UCI><Element-0020>1051</Element-0020><Composite-S002><Element-0004> </Element-0004></Composite-S002><Composite-S003><Element-0010> </Element-0010></Composite-S003><Element-0083>4</Element-0083></Segment-UCI><Loop-Group_3><Segment-UCF><Element-0048>1051</Element-0048><Composite-S006><Element-0040> </Element-0040></Composite-S006><Composite-S007><Element-0044> </Element-0044></Composite-S007><Element-0083>4</Element-0083></Segment-UCF><Loop-Group_4><Segment-UCM><Element-0062>1</Element-0062><Composite-S009><Element-0065>ORDERS</Element-0065><Element-0052>D</Element-0052><Element-0054>98A</Element-0054><Element-0051>AA</Element-0051></Composite-S009><Element-0083>4</Element-0083><Element-0085>18</Element-0085></Segment-UCM></Loop-Group_4></Loop-Group_3><Segment-UNT><Element-0074>5</Element-0074><Element-0062>#ControlNumber(Transaction)#</Element-0062></Segment-UNT></Transaction-CONTRL>
Has anyone encountered such issues? Is there any additional properties that are needed to be configured?
Regards
RDHi Anuj
this is the stack trace
<02-Jun-2013 12:50:47 o'clock BST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-50037: B2B inbound message processing error
Error -: B2B-50037: B2B inbound message processing error
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3283)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1764)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4179)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3855)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3328)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:610)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:192)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
the xml i posted is the one that is logged by the remote TP in the trace logs before the error occurrence,
Regards
RD -
Communicating message processing errors to trading partner
Hi,
We have configured B2B to receive OAG inbound messages.
How can we communicate inbound message processing errors to the remote trading partner?
I found that we can use oag CONFIRM_BOD_004 message for that? How do we that? Do we need to create a separate agreement with the trading partner for the confirm_bod or is there any way to bind it to existing agreement?
Is CONFIRM_BOD_004 the only way of informing the trading partner or there are some other ways of doing it?
Thanks in Advance.
AnilHi Anil,
Oracle B2B can send two kind of acknowledgements to partner to intimate whether received message processed successfully -
1. Exchange level ack - This is supported with specific exchange protocols (AS2, ebMS, RNIF etc.) only. Generic exchange does not have this capability. To understand, how it behaves in case of inbound error, please refer section "D.5 Inbound Exception Handling Scenarios" at-
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/app_except.htm#BCEIEEFF
2. Functional Ack - This is supported as part of document protocol's specification. For e.g. 997 in EDI X12, CONTRL in EDIFACT and CBOD (Confirm BOD) in OAG. Oracle B2B can handle Functional ACK automatically but you have to create a document definition for the same and deploy the respective agreement. Remember, Functional Ack is generally used to communicate to partner whether received message passed the business validation.
You may refer below blog to understand difference between functional ack and exchange ack -
http://www.b2bgurus.com/2009/02/document-vs-exchange-level.html
Remember that this blog is intended for 10g so please ignore any settings defined there.
You may define at an agreement level whether FA is required and if yes then whether Oracle B2B will handle it or middleware will send it to B2B to pass it to TP. You may refer section "Step 4: Select validation, translation, and functional acknowledgment options" at -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/bb_agree_flow.htm#CEGDGCAH
Regards,
Anuj -
Large message processing error
We are getting the error detailed below when trying to process a message of size 280MB.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.services.httpserver.exceptions.HttpIOException: Read timeout. The client has disconnected or a synchronization error has occurred. Read [41262553] bytes. Expected [298803048]. at com.sap.engine.services.httpserver.server.io.HttpInputStream.read(HttpInputStream.java:186) at com.sap.aii.af.service.util.ChunkedByteArrayOutputStream.write(ChunkedByteArrayOutputStream.java:181) at com.sap.aii.af.ra.ms.transport.TransportBody.<init>(TransportBody.java:99) at com.sap.aii.af.ra.ms.impl.core.transport.http.MessagingServlet.doPost(MessagingServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description Internal Server Error Error while sending by HTTP (error code: 500, error text: Internal Server Error)</SAP:Stack>
Can anyone help me with this error.refer this link, it may give u some idea..
http://help.sap.com/bp_bpmv130/Documentation/Planning/XISizingGuide.pdf
Thanks
Farooq. -
PO message processing error at SOAP Adapter
Hello All,
After an PO scenarion setup and performing one messageprocessing in found following error at RW Message Monitoring:
Exception caught by adapter framework: SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException - com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#13 $) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:412) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_
Please could someone tell me where the problem is?
Regards,
JochenHi Jochen
Check if thse threads can help you
Now based on error description -
Refer this SAP Note - 856597 QUestion no 1 -for SOAP adapter configuration- i.e URL
Also have a look into this thread-
SOAP Problem
SOAP Error when testing messages.
*************Reward points if helpfull************* -
Bug Report: #SQLERRM_TEXT# in Process Error Message
According to the Online Help for "Process Error Message" #SQLERRM_TEXT# should be replaced by "Text of error message without the error number". But it isn't.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/I created an after submit PL/SQL process:begin
raise_application_error(-20000,'custom error text');
end;In the process error message attribute, I put:
My error message with #SQLERRM_TEXT# in it.
I submit the page and see this page:ORA-20000: custom error text
Error My error message with custom error text in it.
OKScott -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Getting Err : An error occurred in the message processing program.
Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AMclosed
-
Message processing failed, FTP Receiver Adapter error...
Hello all,
We have a Idoc to File(FTP) scenario using PI.
When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
Any Idea why?
Thanks in advance.Hi ,
There are two things that you can do
1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
2- in your adpater change the connection mode from Per file transfer to "Permanent".
Please feel free to reply on this thread if you are not able to.
Thanks -
Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.
The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work. -
what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.
I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao. -
I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??
Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
Schedule manager for month-end procedure
Hi, I have to prepare Business Process Procedure(BPP) & Configuration Guide For "schedule manager for month-end procedure" .Plz help me by giving some inputs to prepare the documents.Its urgent.... ***points will be assigned. Thanks Sap Guru [email p
-
My program monitor only shows part of the image - is different of the source monitor and I can't see proporply the whole image I'm editing. Magnification is set to Fit; Playback resolution is Full. Is there anything I can do?
-
Instr.lib or user.lib?
Hi, I want to publish some professional LV drivers for our hardware. Intuitively, I supposed that the right installation folder would be "instr.lib". Nevertheless, the NI Driver and VI Library Development Guidelines" (http://zone.ni.com/devzone/cda/t
-
How to install Firefox 3 on Mac OS 10.3.9.2
I can find no place on your web pages with "how to" instructions for downloading Firefox 3 on my older Mac OSX 10.3.9.2
-
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. I know, I'm years behind, but it has become a necessity. My Mac is becoming slow and is incompatible with many softwares and websites. Does anyone know of any problems associated w