Communication with OTM using SOA

Hello,
I am new to SOA and Fusion. I am trying to use the OTM webservice to insert records in the OTM Database.
I have an external system reading an XML file. Using mediator to map the external XML to the OTM webservice WSLD. When I look in the OTM side, it seems like the XML generated by JDeveloper is not what OTM is expecting.
How can I find the XML built based in the mappings in mediator?
Thanks

I'm having the same sort of issue. I can open and see the wsdl and I believe it should be running finE but getting an internal system error. Hope someone an help...

Similar Messages

Communication with database using TCP sockets connection

Hi all,
I am bit of a newbie when it comes to databases. In a project I realised over te passed few weeks, I communicated with an 11g database using an application I created with VS Express. It uses an ODBC connection. I now want to connect a PLC to the same database. These PLC's don't have the ability to install an ODBC client so I need something different.
I am easily able to open a TCP socket on the PLC and send data from there. I would like to know if I can start a TCP sockets connection with our 11g server and send all queries directly. The other (already suggested) option would be to have the PLC connect to a PC that reads this information and hands it over to the ODBC connector, but that would mean I need an extra PC just to 'translate'.
I have been searching these forums for socket, TCP and more and feel it is possible, but I need a good document as a reference to show/tell me how it's done.
Thanks in advance,
Marijn

The TCP/IP interface to Oracle is undocumented (and hugely complex anyway). You'll need to use a higher layer iterface or setup your own infrastructure.
We need more information about what is available to you inside the PLC.
Can you use Java? If so, perhaps use thin JDBC?
Can you sent HTTP requests? If so you could set up your own Web services to handle this.
If you can only use C or C++, Oracle has interfaces there too.. it's called OCI (Oracle Call Interface) and thats as close to the networking layer as you can get.
Finally if you can use .NET Oracle has a Fully Managed Oracle Data Provider for .NET that you could use.
But if all you can do is super low level network access and none of the above then you will need to set up an intermediary as you mentioned.

Communication with servlet using HTTPURLConnection

Hi Again,
well..trying to connect to a servlet using the HTTPURLConnection class.
but the servlet is found (as i have put a system.out in init method of the servlet and that gets printed correctly).my problem is that the doget method does not get invoked.
following is the code:
client side:
public class test
public test()
ObjectOutputStream outs=null;
try
URL url = new URL("http://127.0.0.1:7001/DataFetchServlet");
HttpURLConnection urlcon = (HttpURLConnection)url.openConnection();
System.out.println(urlcon.toString());
urlcon.setRequestProperty("Content-Type","application/octet-stream");
urlcon.setRequestMethod("GET");
urlcon.setDoInput(true);
urlcon.setDoOutput(true);
urlcon.setUseCaches(true);
outs = new ObjectOutputStream(urlcon.getOutputStream());
String str = new String("hello");
outs.writeObject(str);
ObjectInputStream inp = new ObjectInputStream (urlcon.getInputStream());//********************
outs.flush();
outs.close();
catch(Exception e)
e.printStackTrace();
//******************** THIS LINE GIVES A FILENOTFOUND EXCEPTION
I am sure the servlet is found before the object is written but after the getInputStream it throws the excpetion..
can anyone help?????
THanx in advance

urlcon.connect();

Communicating with Crestron using tcp/ip sockets

Greetings...
I trying to finish a desktop application written in Java that connects to an automation controller(Crestron) via sockets (TCP/IP). My main problem is that the connection is constantly going down. I have a thread that is always running to check if the connection is up, when it's brocken just puts it up again.
Then i have another thread that's always running also to get the data that the
Crestron controller sends me.
The connection is broken usually by receiving a null.
Is there any tip to solve this kind of trouble?
The java app. is client and the Crestron is a server. Also i'm running the app. in Windows XP.
It's a fix ip and the port is 4444.
Also if anyone has experience of making software that interects with Crestron Controllers, please tell me something.
Thanks for the help

Sorry, but if your connection keeps getting dropped and your client does not close the connection then there is only one source: the controller itself is closing the connection. It may be some kind of timeout that is causing that the connection is closed. In any way, it is most likely not java but hardware / setting related.

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic?

Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic? Or do you have to install an external WebLogic?
Thanks for help.
Edited by: user7722720 on 07-Dec-2011 02:04

Hi
By default, NO it is NOT possible to deploy any SOA Applications on Integrated Weblogic Server that comes with JDeveloper. This integrated weblogic server is very light weight basic weblogic server with single domain (only 1 AdminServer) to deploy a standard J2EE, ADF Applications like EJBs, WebApps, WebServices, ADF Apps etc. BUT SOA (having BPEL, BPMs etc ) cannot be deployed.
There is an option to upgrade this integrated weblogic server and install SOA on top of this. Like download soa installer that matches with your JDeveloper version and install soa on top of this weblogic. BUT I strongly do not recommend this, because you will not be able to upgrade iin future to the latest versions.
Yes, its always better to install the standalone Weblogic Server that matches with your JDeveloper version. Then install SOA on top of this Weblogic Server. Then create RCU Schemas in any Oracle Database. Run config wizard and create a SOA Domain. Now integrate this in your JDeveloper to deploy any soa applications.
Make sure that JDeveloper, Weblogic Server, SOA Software, RCU all these versions should match and they should be same.
Thanks
Ravi Jegga

How to use SOA Suite in conjunction with SOA Analysis and Design Tools

Hi everybody,
I am a novice in this field and I need some help regarding integrating analysis and design tools with SOA Suite.
We used to analyze and design with Oracle Designer and use its powerful form generator to develop a system. It almost covered all the software lifecycle and kept the traceability between anlaysis,design and implementation.
I have studied about the SOA concepts and read some papaer about SOA Suite. I have also installed the SOA demo based on SOA Suite and I found it absolutely amazing, but my problem is that It seems oracle does not have any tools for SOA Analysis and Design. am I right? if so, How can we analyze and design a system based on SOA concepts and implement it using soa suite in such a way that keeps traceability? What tools is used for this purpose?
It seems that IBM have some tools like Rational Software Architect and Rational Suite which enable people to design and analyze based on SOA concepts and then generates some pieces of code (like oracle designer in old days) but is it possible to design in these tools and then generating codes for SOA Suite ? (for example generating a bpel file from a design model)
As I told before I am a novice in this field and I would be so grateful if other users can share their expriences regarding this matter.
Any help would be highly appreciated.
Thanks in advance,
Navid

Learn About All Things SOA:: SOA India 2007:: IISc, Bangalore (Nov 21-23)
Aligning IT systems to business needs and improving service levels within the constraints of tight budgets has for long been the topmost challenge for CIOs and IT decision makers. Service-oriented Architecture (SOA) provides a proven strategy to clearly address both of these objectives. Creating more agile information systems and making better use of existing infrastructure are two leading factors that are boosting SOA adoption across large, medium, and small Indian industries from the BFSI, Retail, Telecom, Manufacturing, Pharma, Energy, Government and Services verticals in India. If you are an IT decision maker belonging to any of these verticals, SOA India 2007 (IISc, Bangalore, Nov 21-23 2007) presents a unique opportunity to gather cutting-edge business and technical insights on SOA and other related areas such as BPM, BPEL, Enterprise 2.0, SaaS, MDM, Open Source, and more.
At SOA India 2007, acclaimed SOA analysts, visionaries, and industry speakers from across the world will show you how to keep pace with change and elevate your IT infrastructure to meet competition and scale effectively. The organisers are giving away 100 FREE tickets worth INR 5000 each to the first 100 qualified delegates belonging to the CxO/IT Decision Maker/Senior IT Management profile, so hurry to grab this opportunity to learn about all things SOA. You can send your complete details, including your designation, e-mail ID, and postal address directly to Anirban Karmakar at [email protected] to enrol in this promotion that is open until 12 October 2007.
SOA India 2007 will also feature two half-day workshops on SOA Governance (by Keith Harrison-Broninski) and SOA Architecture Deep Dive (by Jason Bloomberg). If you are an IT manager, software architect, project leader, network & infrastructure specialist, or a software developer, looking for the latest information, trends, best practices, products and solutions available for building and deploying successful SOA implementations, SOA India 2007’s technical track offers you immense opportunities.
Speakers at SOA India include:
•     Jason Bloomberg, Senior Analyst & Managing Partner, ZapThink LLC
•     Keith Harrison-Broninski, Independent consultant, writer, researcher, HumanEdJ
•     John Crupi, CTO, JackBe Corporation
•     Sandy Kemsley, Independent BPM Analyst, column2.com
•     Prasanna Krishna, SOA Lab Director, THBS
•     Miko Matsumara, VP & Deputy CTO, SoftwareAG
•     Atul Patel, Head MDM Business, SAP Asia Pacifc & Japan
•     Anil Sharma, Staff Engineer, BEA Systems
•     Coach Wei, Chairman & CTO, Nexaweb
•     Chaitanya Sharma, Director EDM, Fair Isaac Corporation
A partial list of the sessions at SOA India 2007 include:
•     EAI to SOA: Radical Change or Logical Evolution?
•     BPEL: Strengths, Limitations & Future!
•     MDM: Jumpstart Your SOA Journey
•     Governance, Quality, and Management: The Three Pillars of SOA Implementations
•     Building the Business Case for SOA
•     Avoiding SOA Pitfalls
•     SOA Governance and Human Interaction Management
•     Business Intelligence, BPM, and SOA Handshake
•     Enterprise 2.0: Social Impact of Web 2.0 Inside Organizations
•     Web 2.0 and SOA – Friends or Foe?
•     Achieving Decision Yield across the SOA-based Enterprise
•     Governance from day one
•     Demystifying Enterprise Mashups
•     Perfecting the Approach to Enterprise SOA
•     How to Build Cost Effective SOA. “Made in India” Really Works!
For more information, log on to http://www.soaindia2007.com/.

Facing issues with R12 and SOA 11g integration using Business events

Hi,
I am trying to integrate R12 application with Fusion using 11g SOA suite. I configured BES in R12 application and I am able to raise a business event and query it from WF_BPEL_Qtab. I have an Oracle applications adapter listening for the same event in SOA composite deployed over a server. I have verified the DB connection and schema for R12 application in 11g SOA server. However, no SOA instance is being generated. No server log as well.
I understand that 11g SOA uses EDN (using fusion_edn schema) for business events. Are there any changes expected to be done to Oracle Apps adapter to ensure the event is received.
P.S. Oracle apps adapter configuration is probably correct as the out bound calls are taking place correctly.
Thanks,
Sagar

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh Vasudevan

First, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys

After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad

After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
What should I do?

Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

Communication with motor control using RS-232

I need to use labview to communication with a stepper motor drive using the serial port RS-232. Could someone please get me started I'm not sure if a should use VISA or instrument I/O. And if I use one of those, how would I set it up?

Hi Phil,
Outside of LabView, how do you communicate with or control the motor drive? If you are able to use software like HyperTerminal or Procomm, then using the VISA serial communication tools will be the simple way of implementing your solution.
Here are some links which may provide clues on how to proceed. You can also do a search on VISA Serial communication.
Happy wiring!!
JLV
LINKS:
Link 1: Although this one talks about an error, it does provide instructions on how to setup the VISA session:
http://forums.ni.com/ni/board/message?board.id=170&message.id=99660&query.id=0#M99660
Link 2: Here are some examples: (good starting point):
http://forums.ni.com/ni/board/message?board.id=170&message.id=65873&query.id=0#M65873
Link 3: more info:
http://forums.ni.com/ni/board/message?board.id=170&message.id=86971&query.id=0#M86971

How to use Crossbow Xmesh WSN LabVIEW drivers for downstream communication with motes

Hello,
I am trying to use LabVIEW Crossbow Xmesh WSN driver for downstreaming commands but driver programs are not working.
I am interested in changing node (Iris mote with MDA300 board) update rate from LabVIEW program running on host PC .
I have used Set node update rate.vi with open stream.vi and start stream.vi in proper sequence and developed a program to change node update rate. When program is run no error is shown but node update rate is not changed.
Pl suggest what I should I do.
What is the function of WSN write VIs (WSN write Raw 1sensor1point). For what type of message this is used.
I want to actuate relay on MDA300 with mote id 2. What VIs (from driver ) I have to use and how to issue command related to it.
Incase any one can help I will be grateful
Roop

Hi Arjun,
I am sending you snap shot of VI developed to change node update rate.and also the heirarchy of drivers VIs used in the program for better understanding .
In case you can figure out why the command message send is unable to communicate with mote .
Also for downstream communication with motes the packet format used is described in Moteworks user manual from MiMSic.com
I think the developer of these drivers can help you out in solving my problem.
Thanks
Roop
Attachments:
sreenshot to arjun ni for checking downstream comm.doc ‏288 KB

Integrating Ariba with JDE using Oracle SOA

Hi Gurus,
We want to integrate Ariba system(Purchase Order opeartion) with JDEdwards using Oracle SOA Suite.
Anybody has got any material or links which supports this activity?
Any valuable inputs/suggestions on this will be appreciated.
Thanks in Advance,
Abhishek

Hi,
Thank you for your reply.
Is the usage of B2B not applicable for this project ?
Thanks

Using Labwindows CVI Version 10.0.1 USB communication with FTDI FT2232D to unit under test.

Communication with unit under test works fine in hypterminal after I downloaded virtual driver from FTDI site.
Never done any USB communication before in LabWindows CVI. What functions can I use in labwindows CVI?

Since the device presents itself as a COM port (pretty standard with the FTDI chips) you should be able to use the RS-232 library in CVI. OpenComConfig() will open a connection to the device, ComWrt() will write data to it, and the various ComRd() functions can be used to read the responses back.

Communication with OTM using SOA

Similar Messages

Maybe you are looking for