Compact 2013 Interrupt Issue Solved

As flagged as a comment to the post here, "My iST isn't called", there is a solution in the pipeline (as an update) for ARM interrupt issue. The issue is that interrupts that are close to timer ticks get lost. There is a complete discussion
of this on my blog at:
http://embedded101.com/Blogs/David-Jones/entryid/586/Windows-Embedded-Compact-2013-Interrupt-Issue-Solved
Cheers David Jones
Embedded MVP

Similar Messages

Exchange 2007 to 2013 Migration issues. Prompt for credentials, Public Folders inaccessible, Apps not working

Exchange 2013 Migration issues
I have three issues and decided to list them here. Please pick and choose to assist. Thanks in advance.
Environment:
Mixed 2007 SP3 R12 and 2013 CU3. 2007 Environment was webmail.domain.com. I installed new Exchange 2013 (1 CAS, 1 Mailbox) according to:
http://technet.microsoft.com/en-us/library/ff805032(v=exchg.150).aspx. Exchange 2007 is now legacy.domain.com and Exchange 2013 CAS is webmail.domain.com.
Machine 1: Windows 8.1, not domain joined, using Outlook Anywhere external. Outlook 2013
Machine 2: Windows 7, domain joined, using Outlook Anywhere internal. Outlook 2010 SP2
I have migrated 1 user so far to Exchange 2013. This user was a Domain Admin. I have removed that membership. I checked the box to inherit permissions of the security of the object and reset the AdminCount attribute in ADSIedit to 0 and verified this replicated
to all domain controllers. ( I originally thought this to be the issue with it prompting for the password. )
Here is a Get-OutlookAnywhere cmdlet...
ServerName                         : EXCHANGE2007SVR
SSLOffloading                      : False
ExternalHostname                   : legacy.domain.com
InternalHostname                   :
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Basic
IISAuthenticationMethods           : {Basic}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : False
MetabasePath                       : IIS://EXCHANGE2007SVR.domain.local/W3SVC/1/ROOT/Rpc
Path                               : C:\WINDOWS\System32\RpcProxy
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 8.3 (Build 83.6)
Server                             :
EXCHANGE2007SVR
AdminDisplayName                   :
ExchangeVersion                    : 0.1 (8.0.535.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2007SVR,CN=Servers,CN=Exchange
                                     Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
                                     Groups,CN=DOMAIN,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity                           : EXCHANGE2007SVR\Rpc (Default Web Site)
Guid                               : 4901bb14-ab81-4ded-8bab-d5ee57785416
ObjectCategory                     : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 12/31/2013 4:08:04 PM
WhenCreated                        : 7/18/2008 10:56:46 AM
WhenChangedUTC                     : 12/31/2013 9:08:04 PM
WhenCreatedUTC                     : 7/18/2008 2:56:46 PM
OrganizationId                     :
OriginatingServer                  : DC1.domain.local
IsValid                            : True
ObjectState                        : Changed
ServerName                         :
EXCHANGE2013SVR
SSLOffloading                      : True
ExternalHostname                   : webmail.domain.com
InternalHostname                   : webmail.domain.com
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : True
MetabasePath                       : IIS://EXCHANGE2013SVR.domain.local/W3SVC/1/ROOT/Rpc
Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 15.0 (Build 775.38)
Server                             : EXCHANGE2013SVR
AdminDisplayName                   :
ExchangeVersion                    : 0.20 (15.0.0.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE2013SVR,CN=Servers,CN=Exchange
                                     Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
                                     Groups,CN=DOMAIN,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local
Identity                           : EXCHANGE2013SVR\Rpc (Default Web Site)
Guid                               : d983a4b1-6921-4a7f-af37-51de4a61b003
ObjectCategory                     : domain.local/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 1/7/2014 11:29:05 AM
WhenCreated                        : 12/31/2013 1:17:42 PM
WhenChangedUTC                     : 1/7/2014 4:29:05 PM
WhenCreatedUTC                     : 12/31/2013 6:17:42 PM
OrganizationId                     :
OriginatingServer                  : DC1.domain.local
IsValid                            : True
ObjectState                        : Changed
ISSUE 1
Issue: On Machine 1 (reference above) Windows Security prompt that says "Connecting to
[email protected]". Almost always prompts when Outlook is first opened. Afterwards (if it goes away) seemingly random on when it asks for it. I put in the credentials (absolutely correct) and it fails and prompts again.
I always check the box for it to save the password. To get rid of it, I click the Cancel button at which Outlook reports "NEED PASSWORD", but still acts fine sending and receiving emails. Eventually the "NEED PASSWORD" sometimes changes
to say "CONNECTED", but it works regardless.
No issues on Machine 2 so I don't know where the problem might be as there are a lot of variables in play here.
ISSUE 2
Migrated user is unable to open Public folders from Exchange 2007.
Cannot expan the folder. Microsoft Exchange is not available. Either there are network problems or the Exchange server is down for maintenance. (/o=...).
This error occurs on Machine 1, Machine 2 and from OWA, same error each time.
ISSUE 3
Apps. Installed by default are 4 apps (Bing Maps, Suggested Meetings, Unsubscribe, Action Items). I have made sure the apps are enabled in OWA and they show up in mail items on both Machine 1 (Outlook 2013) and OWA. They do not show up in Machine 2 (Outlook
2010). I'm assuming that isn't supported.
In OWA, when I go to the installed apps listing it shows all of the apps but has a broken link on the image describing the app.
When I click the app in either Outlook 2013 or in OWA, I get "APP ERROR, Sorry we can't load the app. Please make sure you have network and/or internet connectivity. Click "Retry" once you're back online.
Current workaround is just disabling them through OWA.

Hello,
In order to avoid confusion, we troubleshoot a issue per thread usually.
For your first isue, I agree with Ed's suggestion to check if your certificate name is correct.
Besides, I recommend you change ExternalClientAuthenticationMethod from Basic authentication to Negotiate authentication to check the result.
For the second issue and third issue, please create a new post.
If you have any feedback on our support, please click here
Cara Chen
TechNet Community Support

VNC tool compatibility with WinCE and Windows Embedded Compact 2013 operating systems

What are all the VNC tools that are compatible with WinCE and Windows Embedded Compact 2013 operating systems or are there any RDP solutions available?
I am looking for a common VNC tool which is compatible on both the operating systems?

This forum is for POSREady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

OTA Update 4.08.605.2 "Rebooting Now..." Issue - SOLVED!

After so many tries and frustration I finally came across the information below and it worked like a charm
http://forums.androidcentral.com/verizon-droid-incredible/134246-second-gb-update-patch-wont-reboot-issue-solved.html
Can't say this will work for everyone, but it worked for me.
Boot into recovery
Press and hold Power, Choose "Restart" option
When screen turns off, press and hold Volume Down and Power
When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
Press the Power button to select “RECOVERY.”
When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
Using the volume button, scroll down to “Wipe cache partition” and select it.
Select "Reboot system now"
You can now wait for the update to show up again, or try one of the methods in the post: For those who want the second GB update/patch to get the update again. It should reboot this time. Beware, it will stay at the Droid Eye screen after reboot for a while (~5 mins), but eventually, it did get installed. Be sure to make a lot of space for it though...

The restart option that AmDroid is talking about is not on the regular phone menu. Please read his post carefully. What he is talking about is in an advanced recovery based menu option.
Also, I was on 2.2 and the clear cache set date and time forward trick did not work for me to get the udpate. The clear cache and set date and time forward trick seems to mostly work if you are already on 4.06 software version and want to get the 4.08 software version.
For those on 2.2, patience is warranted! However, if you really cant wait and want to go the 4.06 update manually, you can search Android Forums dot com for manually install gingerbread. And don't worry about the article talking about being rooted. You dont need to be rooted. The instructions will work for a stock phone too. As soon as you do the manual 4.06, the 4.08 update will show up immediately.
Hope this helps!

Hi all ...I would like to add a language that is not available in Photoshop cc2014 .. My computer writes it but backwards .. How can I have this issue solves?

hi all ...I would like to add a language that is not available in Photoshop cc2014 .. My computer writes it but backwards .. How can I have this issue solves?

What language are you talking about? You might need to enable Edit/Preferences/Type/Middle Eastern and South Asian for proper display.

Developing Windows Embedded Compact Application (installation issues)

I want to develop an application for a device running Windows Embedded Compact 7
I have downloaded the Application Builder for Windows Embedded Compact 2013 (VSEmbedded_AppBuilder.exe) from here and installed it on my machine
I am following the instructions from
this page which says that there should be a "Windows Embedded Compact" node within the New Project dialog box. There isn't
Additionally, if I launch VSEmbedded_AppBuilder.exe I get a window that only gives you the option to Repair or Uninstall and displays no information other information other than the fact that it is the Application Builder for Windows Embedded Compact 2013
that you are trying to run
I have tried repairing and uninstalling and it doesn't help. I have also tried restarting my pc between installing and opening visual studio. Doesn't help either
What am I missing here?
I'm running Visual Studio 2012 Professional on a Windows 7 machine. All I want to do is build an application for my Windows Embedded Compact 7 device
Thanks

You say that your device is running Compact 7
You downloaded a Visual Studio plug in for Compact 2013
You provided links to Compact 2013 documentation and tools
Since your device is running Compact 7, it would make sense to target your app to run on Compact 7 - if you target Compact 2013, your app
will not run.
You will need to install Visual Studio 2005 or 2008 - which one depends on what you plan to do.
Take a look at
http://embedded101.com/Blogs/SamuelPhung/entryid/211/Compact-7-Getting-Started-Part-4-Develop-Managed-Code-Application
Take a look at
http://embedded101.com/Blogs/SamuelPhung/entryid/216/Compact-7-Getting-Started-Part-5-Develop-Native-Code-Application
Take a look at http://embedded101.com/Compact7
Take a look at
https://msdn.microsoft.com/en-us/library/jj838858(v=winembedded.70).aspx
Take a look at CTacke's answer in
http://stackoverflow.com/questions/24241978/developing-net-compact-framework-apps-in-post-2008-visual-studio
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

GetWindowLong/SetWindowLong on GWL_WNDPROC crashes in Compact 2013

Trying to hook on the WndProc in CE 6.0 worked fine by defining a callback function and putting it on the control. In Compact 2013 it seems to not work anymore. For example I have a textbox and try the following where the Handle is the textbox Handle:
[DllImport("coredll.dll", SetLastError = true)]
static extern IntPtr SetWindowLong(IntPtr hWnd, int nIndex, IntPtr newProc);
[DllImport("coredll.dll", SetLastError = true)]
static extern IntPtr GetWindowLong(IntPtr hWnd, int nIndex);
delegate IntPtr WndProcDelegate(IntPtr hWnd, uint msg, IntPtr wParam, IntPtr lParam);
private void HookOnWndProc()
m_defWindowProc = GetWindowLong(Handle, GWL_WNDPROC);
m_windowProc = new WndProcDelegate(Callback);
SetWindowLong(Handle, GWL_WNDPROC, Marshal.GetFunctionPointerForDelegate(m_windowProc));
(GWL_WNDPROC is -4)
I see that after calling GetWindowLong the latest win32 error is 87 (invalid parameter). After returning from the function above the application crashes. This did not happen in CE6. What has changed?
Note: This seems to only occur on our SabreLite ARM image. If anyone get this same problem on another ARM image, please let me know.

Basically we did this:
// C++ side
WNDPROC managedProc;
// Export this function from your DLL. Call it instead of SetWindowLong
LONG CustSetWindowLong(HWND hWnd, int nIndex, LONG dwNewLong) {
if (nIndex != GWL_WNDPROC) return SetWindowLong(hWnd, nIndex, dwNewLong);
managedProc = reinterpret_cast<WNDPROC>(dwNewLong);
return SetWindowLong(hwnd, GLW_WNDPROC, &::NativeWndProc);
LRESULT CALLBACK NativeWndProc(HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam) { // do not use CallWindowProc here
return managedProc(hwnd, msg, wParam, lParam);
(Actually we had some more plumbing to deal with the case that multiple managed controls might want to call CustSetWindowLong, but this should illustrate the workaround).

Windows Embedded Compact 2013 Wave 1 Cumulative Update on MSDN

A new Compact 2013 release is available on MSDN that will bring your build environment up to date as per February 2015.
See my Blog:
http://embedded101.com/Blogs/David-Jones/entryid/584/Windows-Embedded-Compact-2013-Wave-1-Cumulative-Update-on-MSDN
David Jones
Embedded MVP, Australia
If this helps you, please give me a vote. Thanks.

Grrr I just that : GetWindowLong/SetWindowLong on GWL_WNDPROC crashes
in Compact 2013
It has been accepted by Microsoft as a bug. We hope to get it fixed. Otherwise you cannot hook on WndProc at all for ARMv7 on Compact 2013.
Windows Embedded Compact 2013 only disappointment over disappointment. I would have been better to stay with Linux.
I need a file explorer, where the file explorer that we had in Windows CE 5 ?

WinCE 2013 SMP issue

Dear All,
We are trying to port Windows CE 2013 on to Cortex A7 dual core processor (A20). While the OS is working fine in single CPU mode, when we enabled SMP, the system starts to hang. It may hang any time between 5 seconds to 100 seconds of booting up the
secondary CPU.
50% of the time it hangs when the main CPU0 sends an IPI (as SGI) and waits for the other CPU1 to respond. And it seems CPU1 is lost and it is not receiving the interrupt at all. Other times it just hangs. But no exceptions are thrown. My understanding
is that any one or both of the cores just got locked for some reasons.
Thanks and Regards,
Senthil

Ah yes, integrated L2 on A7, so SCTRL.C/I will disable it all (and even if no integration C/I disables it all).
I still think it will be both are waiting in MDSpin, but without a JTAG debugger there is simply no way of knowing. You will have to get one to get to the bottom of this one. I recommend getting the Power Debug II from Lauterbach, simply because of the excellent
support you get from the guys at Lauterbach.
Of course you should try with a fully updated WEC2013 installation, but I doubt this will solve your issue.
Good luck,
Michel Verhagen, eMVP
Check out my blog: http://guruce.com/blog
GuruCE
Microsoft Embedded Partner
http://guruce.com
Consultancy, training and development services.

Still: Macbook Air 2013 Wifi Issues On Wake-Up (And Partial Solution)

I just got my new MBA 13" Mid 2013 last week (updated to Mavericks), and have been having issues with the wifi for a couple days now. Specifically, when I wake my MBA in the morning, it will have disconnected from my home wifi and will not reconnect again. It can see the wifi (and it did ask the WPA2 password after I deleted the network in preferences), but it will not connect due to a "Connection timeout".
I didn't have these issues with my old MBP 13' Early 2011 (also running Mavericks). Also, this only started after I had fully set up my MBA and replaced my MBP, that is, connected it to the external display, hard drive, etc.
Now, it turns out what I have to do is disconnect my external hard drive and reconnect to the network. What kind of architecture makes something like this even possible? And it's not just me, https://discussions.apple.com/message/23423481#23423481 had the same problem: needing to remove a USB device in order to be able to reconnect to his wifi.
This reminds me that with my old MBP, I had an issue where copying large data volumes to external drives via USB would render the wifi connection unusable. So apparently there is something about Macbook architecture that links USB and wifi.
But why does this only occur after a full night of the MBA sleeping? I guess it would have to drop the wifi for energy saving, which it doesn't do right away whenever it goes to sleep?
In any way, this is extremely frustrating. What is the deal with USB and wifi in Macbooks? I really hope Apple can fix this via a software solution, but to be honest, I don't trust them to anymore. I guess for them this is "working as intended".
Cheers
Nate
PS: Please, do not post any links to "troubleshooting steps I may find helpful". I do not, because they were not.

It turns out the MBA doesn't even have to go to sleep for this to happen.
Today i received a new HDD for my time machine backups, so some data transfer was necessary. I made a 600GB backup from my Mac and an external hdd I use for media files, then i started copying another 500 Gb from one external drive to another (USB to USB).
Now in the middle of this transfer (which is rather slow to begin with at around 46 MB/s) my wifi connection just went out. My iPhone, iPad and Windows PC can still connect to my router, but the Mac tells me to "move closer" to it.
It's interesting that my Mac can no longer see any other wifis besides my own, so I guess it's wifi range is somehow impeded by these USB transfers? How does that even work?
At around 50% the data transfer had come to a complete halt, so I interrupted the process. Two seconds after I had ejected AND unplugged both external drives, the MBA could "see again". All visible wifis were listed again and I could connect without problem.
Is there anyone with a similar experience? Is this a hardware defect or an architectural problem? Why have I had these USB/wifi-issues on two Macbook models spaced lmost three years apart?

Currently using Outlook 2010. It started acting up today. If I purchase 2013, will it solve my problem, or could the problem be coming from a corrupt PST file?

I use outlook 2010. It has been working perfectly. Today I got an error message that I never "caught" quickly enough. Something about a fax ad on not working properly and I should contact the ad on people. Ever since then, my outlook is not working
properly. When I create an e-mail a box appears, similar to a text box but with nothing inside. I cant type in the box, and can therefore not send out e-mails. Will buying 2013 outlook solve my issue?

Hi there
I’m sorry to hear that you have been unable to access your voicemail!
It seems like due to the SIM switch, the voicemail service has temporarily been put into an inactive state. When swapping between devices, this will occur and requires re-setting up the voicemail service. Your unheard and saved messages would not be affected. Are you currently still in the Hong Kong area?
Thanks,
Charise

SSRS/SharePoint Migration 2010 to 2013 connection issues

We are currently attempting to move our SharePoint 2010 to 2013 and SSRS Information. The first attempt at this we were unable to get SSRS to show up in Central Admin. We decided to rebuild all servers and re-installed everything.
This time we have SSRS showing up in Central admin and we are able to run some reports from our sites now. In our 2010 environment we are using "Windows authentication (integrated) or Sharepoint user" option with SharePoint Lists. I am unable to
get this to work in our 2013 Environment, the stored credentials with windows authentication will work however.
I have read t through many different books, MS Guides, Blogs, Forums, etc but unable to solve this issue.
I have tried editing the rsreportserver.config to match our Production, did not help. (also tried different authentications)
I found an article saying to change the "Forms" Auth in some config files to "Windows" did not help
When I try to go to our \\localserver\reportserver (appserver) I get a blank page with this info:
HTTP/1.1 200 OK
Server: Microsoft-IIS/8.5
Date: Fri, 21 Nov 2014 22:30:03 GMT
Connection: close
I have tried going into Central Admin -> General Application Settings -> Report Server Integration. and fill out this information also but receive this error:
Failed to establish connection with report server. Verify the server URL is correct or review ULS logs for more information. Product area: SQL Server Reporting Services, Category: Configuration
Pages
I am not sure if I have missed some step along the way of migrating and setting up this information. Any help or other things to try would be very helpful.
Thanks!

Hi young99,
According to your description, you get connection issue after migration from SharePoint 2010 to SharePoint 2013. Right?
In this scenario, we are not clear how you did the migration. Please follow these steps and check if you miss anything:
Restore Reporting Services encryption keys
Backup the SharePoint content databases and detach it.
Backup Reporting Services catalog database.
Copy Reporting Services configuration files.
Restore SharePoint Content databases to the new farm.
Restore the Reporting Servicesencryption keys.
Restore the SQL database that is the Reporting Services catalog database (ReportServer).
Restore Reporting Services configuration files.
Create a new Reporting Services service application.
For more information, please see:
Migrate a Reporting Services Installation (SharePoint Mode)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Xen 4.0.2-rc1-pre hotplug scripts issue [solved]

I've been working on getting a xen dom0 running on arch linux. I've got to the point where I can start xen domu's and everything on them works.
The issue I'm having is if I stop one in any way, I cannot restart a domu or start a new one. It fails with the error message "Error: Device 0 (vif) could not be connected. Hotplug scripts not working." After it fails the only way I've found to get it going again is to restart the dom0.
Configs
# cat /var/xen/images/base.cfg
name = "base" ## Must be unique
memory = "512"
vif = ['mac=00:16:3E:00:00:1B']
dhcp='dhcp'
disk = ['file:/var/xen/images/base.img,xvda,w', 'file:/var/xen/images/base.swap,xvdb,w']
root = "/dev/xvda ro"
kernel = "/boot/vmlinuz26"
ramdisk = "/boot/kernel26.img"
extra = "console=hvc0 xencons=tty"
on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"
# cat /etc/xen/xend-config.sxp
(xend-relocation-server yes)
(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
(network-script network-bridge)
(vif-script vif-bridge)
(dom0-min-mem 196)
(enable-dom0-ballooning yes)
(total_available_memory 0)
(dom0-cpus 0)
(vncpasswd '')
(device-create-timeout 10)
#(device-destroy-timeout 100)
Note: I did remove the comments from the xend-config.sxp, with the exception of the one I think may be relevant.
DomU's running..
# brctl show
bridge name bridge id STP enabled interfaces
eth0 8000.90fba6ed73a3 no peth0
vif1.0
vif2.0
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 90:FB:A6:ED:73:A3
inet addr:192.168.1.22 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::92fb:a6ff:feed:73a3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29553 errors:0 dropped:0 overruns:0 frame:0
TX packets:17680 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17261454 (16.4 Mb) TX bytes:1850137 (1.7 Mb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:336 errors:0 dropped:0 overruns:0 frame:0
TX packets:336 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22150 (21.6 Kb) TX bytes:22150 (21.6 Kb)
peth0 Link encap:Ethernet HWaddr 90:FB:A6:ED:73:A3
inet6 addr: fe80::92fb:a6ff:feed:73a3/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:52681 errors:0 dropped:0 overruns:0 frame:0
TX packets:14479 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14769659 (14.0 Mb) TX bytes:1582041 (1.5 Mb)
Interrupt:253 Base address:0xa000
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:12539 errors:0 dropped:0 overruns:0 frame:0
TX packets:15445 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:14388862 (13.7 Mb) TX bytes:1400508 (1.3 Mb)
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:4383 errors:0 dropped:0 overruns:0 frame:0
TX packets:11116 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:244246 (238.5 Kb) TX bytes:1111875 (1.0 Mb)
Stop and try to restart..
# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 512 4 r----- 908.2
base 1 512 1 -b---- 78.0
samba 2 512 1 -b---- 134.6
# xm destroy base
# xm create /var/xen/images/base.cfg
Using config file "/var/xen/images/base.cfg".
Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
And then the brctl show and ifconfig -a info..
# brctl show
bridge name bridge id STP enabled interfaces
eth0 8000.90fba6ed73a3 no peth0
vif1.0
vif2.0
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 90:FB:A6:ED:73:A3
inet addr:192.168.1.22 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::92fb:a6ff:feed:73a3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30912 errors:0 dropped:0 overruns:0 frame:0
TX packets:18901 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17341760 (16.5 Mb) TX bytes:2167255 (2.0 Mb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:336 errors:0 dropped:0 overruns:0 frame:0
TX packets:336 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22150 (21.6 Kb) TX bytes:22150 (21.6 Kb)
peth0 Link encap:Ethernet HWaddr 90:FB:A6:ED:73:A3
inet6 addr: fe80::92fb:a6ff:feed:73a3/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:54233 errors:0 dropped:0 overruns:0 frame:0
TX packets:15726 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14938163 (14.2 Mb) TX bytes:1900851 (1.8 Mb)
Interrupt:253 Base address:0xa000
vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:12558 errors:0 dropped:0 overruns:0 frame:0
TX packets:15525 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:14389906 (13.7 Mb) TX bytes:1408638 (1.3 Mb)
vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:4423 errors:0 dropped:0 overruns:0 frame:0
TX packets:11212 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:246422 (240.6 Kb) TX bytes:1121101 (1.0 Mb)
I'll gladly post any other configs or logs if needed. Any suggestions to get this fixed?
Thanks,
Matt
edit: Solved, see 3rd post..
Last edited by mdcollins05 (2011-02-18 03:46:58)

I "fixed" it. Apparently the newer udev versions (>151) don't work properly with xen.
Solution: Downgrade to udev-151.
In my case, I downloaded http://schlunix.org/archlinux/core/os/x … pkg.tar.gz and ran: pacman -U /path/to/udev-151-3-x86_64.pkg.tar.gz
I then restarted and my errors went away.
Hopefully this helps someone!

SBS2011/Exchange 2010 + Outlook 2013 Flow Issues

Hi everybody,
Some time ago I've configured a SBS2011 server for one of my customers.
The SBS2011 has exchange and sharepoint, these services work fine.
The exchange server is only being used for the calendars, no e-mail flow.
The company uses IMAP through an external hosting-server.
So in Outlook 2013 we configure 2 accounts, one exchange account and one IMAP account.
Configuring the clients isn't a problem, and all seems fine, the calendar works.
But when the e-mail flow starts, users wil receive the same email multiple times and it seems the system is in a loop. E-mail flow will stop or the users get the same e-mails multiple times.
I've checked multiple solution regarding Win8+Outlook 2013 and IMAP, (issue about an update and setting the right root folder), but nothing seems to help.
We installed Outlook 2007 on the clients and configured them with both of the accounts and the system works like a charm! E-mail and the calendar are working like it should.
But the company bought about 20 Office 2013 licenses, so we need to get this to work on the new Outlook.
I don't think there is a problem in the Exchange Server, but in Outlook 2013, possible because both of the accounts share the same OST file.
Does anyone know how to solve this problem? Been running my mind for months.
With kind regards,
Tim Grave

Hi,
Based on the description, I understand Outlook uses the calendar via Exchange and email via IMAP, so there are two accounts setup in Outlook 2013, correct? Then how come they share the same .ost file? Please try to configure an individual .ost file
for both accounts, check whether the issue persists.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Exchange 2010 / Outlook 2013 - Mailflow Issues

Hi everybody,
Some time ago I've configured a SBS2011 server for one of my customers.
The SBS2011 has exchange and sharepoint, these services work fine.
The exchange server is only being used for the calendars, no e-mail flow.
The company uses IMAP through an external hosting-server.
So in Outlook 2013 we configure 2 accounts, one exchange account and one IMAP account.
Configuring the clients isn't a problem, and all seems fine, the calendar works.
But when the e-mail flow starts, users wil receive the same email multiple times and it seems the system is in a loop. E-mail flow will stop or the users get the same e-mails multiple times.
I've checked multiple solution regarding Win8+Outlook 2013 and IMAP, (issue about an update and setting the right root folder), but nothing seems to help.
We installed Outlook 2007 on the clients and configured them with both of the accounts and the system works like a charm! E-mail and the calendar are working like it should.
But the company bought about 20 Office 2013 licenses, so we need to get this to work on the new Outlook.
I don't think there is a problem in the Exchange Server, but in Outlook 2013, possible because both of the accounts share the same OST file.
Does anyone know how to solve this problem? Been running my mind for months.
With kind regards,
Tim Grave

Hi,
This doc may help you a lot.
http://office.microsoft.com/en-in/outlook-help/introduction-to-outlook-data-files-pst-and-ost-HA102749465.aspx
Install Only one Outlook Ex :- Outlook 2007 / 2010 / 2013
And if you want to create a *.pst file you need to go to
1. File > Account Settings > Account Settings.. > Data Files > Add > Create a new PST as you want.
Regards, Koustov Choudhury

Compact 2013 Interrupt Issue Solved

Similar Messages

Maybe you are looking for