Comparative Report in COPA
Hi All
We have cost based copa active. I want to develop report in co-pa where i want to plot profitability of varies Sales Offices for specific period for specific material. Example
Selection criteria
Material
Region
Sales Office from
Sales Office To
From Period
To Period
In Detail Report Layout
Material
Sales Office Period Value fields1.......Value fieldn Profit
AA 012008 to 022008 rev cost components Fixed cost Profit
BB
CC
Regards
Sanjay Petkar
Hi,
There is no record type associated with transferring condition values whether MM or SD.
Billing data from SD is identified with record type 'F'.
Data from FI/MM is identified with record type 'B'.
Usually, price differences arising in invoice verification/MM are posted to CO-PA.
This is what SAP help has to say about transferring MM conditions to COPA:
It is also possible to transfer conditions from MM to update billing data in pooled payment in the IS Retail system. These are transferred according to the same rules as SD conditions.
Do you fall under this category? Well, I've not used this functionality - not sure how you can bring cost break up of raw-material to CO-PA with this function.
As per you, what exactly will be the triggering point to transfer this MM conditions to CO-PA? At the time posting of MM invoice (MIRO)?
Hope this helps.
Edited by: Pradeep kumar Athmakur on Jan 7, 2010 10:34 PM
Similar Messages
-
App Designer/Compare Reports
Anyone?
Could someone please give some guidance on how they typically run Compare Reports either in App Designer or through Change Assistant?
We were recently upgraded from 8.9 to 9.2 and I've newly assumed the role of administering our PeopleSoft system. While I do have several classes lined up for training I am still fresh to a lot of this.
When I pull down a Tax Update, or selective bug list from our PUM Image and run it through Change Assisant obviously there is a step where CA compares this project to the target database. However, when I go to App Designer to review those reports, none of them list any objects or differences. We've been manually reviewing SQRs in TaxUpdates for any necessary customizations - surely that isn't the proper method...
Is it possible that CA/AppDesigner is not properly comparing the definitions 1:1 and not finding any differences?
Is it a configuration I'm missing somewhere?
I'm looking for some ideas on how everyone else runs/reviews their compare reports for Tax Updates,etc.
Thanks,
Terry NixonThe last poster is correct about memory possibly causing this. I've also seen it happen when an object in App Designer is corrupt such as a record. In that scenario, I removed record objects types from the compare, and ran them separately to identify the bad one, in order to prevent one bad apple from holding up the entire compare process.
-
Report writer, copa reports
Hi,
Masters,
could any one please tell me , where we can configure for Report writer and what are the main reports in COPA
Thank's in advanceCOPA is a mini data warehouse and each company have to define the datasource structure, called profit segment, based on their own profit analysis requirement before they create any PA reports. Since the profit segment could be different from company to company, no univeral PA report can be used for all companies, that is also why SAP normally do not provide any standard reports in KE30.
So, you have to first define the characteristics, value fields, and profit segment with the characteristics and value fields (KEA0). Then create your own PA reports with the segment you define forms (KE34, KE31).
Forms are the structures required as the basis for the definition of reports
Regards -
Please help. I can't open pdf comparables report from MLS Realist website.
Please help. I can't open pdf comparables reporT from MLS Realist website. Thank you!
I have this problem too and no one seems to be able to figure out what should be done. Feel like not using iPad any more.
-
XML INVOICE REPORT- MULTIPLE COPIES
Hi All,
I am developing report for sales invoice. The source for the report is RDF and template designed using RTF for difffent operating units.
Now We have an requirement to to print the invoice - 3 copies every time when user submit the request. In RDF we tried the option copies (system parameters) but it is not repeating the xml code thrice and for RTF layouts not working.
Using Version
Oracle Apps Release 12
Oralce XML Publisher 5.6.2
Word 2003
If any one have ides please drop here..
Welcoming your advice!.....
Thanks
PrabuWe have a requirement, where an Invoice batch job will run
at night and pick up all the entire invoices, batch would contain invoices of
different customers.
Each customer will have DFF at site level informing number
of copies required to be printed.
Eg:
Customer ABC Invoice ABC111 No. of Copies -4
Customer PQR Invoice PQR222 No. of Copies -2
Customer XYZ Invoice XYZ3333 No. of Copies -1
I am trying to use following variable in the RTF, for the data to loop but it creates various problems
Grouping and Variables:
<?for-each@section:G_HEADER?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,DFF,1)?> --- value coming in XML tag from DFF
<?for-each:/?>
The actual invoice tables and rtf
<?end for-each?>
Problems:
If I remove <?for-each:/?> tag, I am
getting the looping of data but the output file has no data from tags – only column
labels / headers appear ---- But looping happens
a.) With <?for-each:/?> tag,
sometimes the RTF works and looping happens along with data and something the RTF crashes with below error
oracle.xdo.XDOException:java.lang.reflect.InvocationTargetException
b.) When I try with a data containing just single invoice – looping and everything works as expected.
However, if I load data which has multiple invoices each having different value in DFF for looping, entire file only contains first invoice ---- Looping happens still but does not proceed to next group
Solutions:
Can someone please guide me to the solution?
Please recommend what would be the correct syntax, so that each invoice gets looped dynamically in the RTF. -
Plant wise profitability report in COPA.
Dear Friends,
I am creating a plant-wise profitability COPA report. Rows in the report contains sales, expenses and profit and the columns are the plants. The report is created with form.
Our company has more than 20 plants and they want all the plants to appear in single report. At present I am only able to add maximum 13 columns in the report (12 columns for plants and 13th column for total) in the form as I am unable to add further columns for plants.
Could anyone guide me as to how can I have all the 20- 25 columns in the Form. Is there any way to change the form-size to accomodate all the plants.
Further, All plants do not have data every month, so is it possible to hide the plant columns which does not have any data for the month.
Thanks you for your help!
Regards
Umesh GothankarThanks Both of you for your reply!
Harish I am ok with other columns printing in next page. but could you let me know the process.
I am not sure as to how to add the additional columns on the form.
Thanks
Umesh -
Hello all,
Can any copa expert suggest me on the following problems.
1. There is a difference between FI sales value and COPA sales value, it has been reported that one document was not considered in COPA. what should I do to include this document.
2. Sales order was posted wrongly to other revenue account instead of sales account.
Thank you,
Best regards
SrinivasHi Srinivas,
1. You need to include the Billing Document Type in the "Form" of that report.
2. I don't feel, revenue account will be selected manually at the time of posting...need to look into assignements. If it was an FI entry, try to pass a JV.
Srikanth Munnaluri -
How to get reports from comparative reports from GLT0/FAGLFLEXT
Hi,
We have activated New GL and also write and read option to GLT0 indicators are active. While we are able to see in FS10N account balance report the account balances for the periods in classic GL but not been able to get comparative financial statements (F.01 report) with prior year comparatives. We have not yet deactivated GLT0.
FS10N account balances we are able to see by using parameter ID -CLASSIC_BAL_FS10N.
Is there any way to get comparative financial statements until we deactivate GLT0 at the current year end?
RameshHi,
Please notice the new data structures within NewGL: in this scenario
total table FAGLFLEXT replaces GLT0. (There is the possibility of
parallel update and read of GLTO with activated NewGL: customizing path.
Financial Accounting(New)-> Financial Accounting Basic Settings (new)->
Tools Deactivate Update of Classic General Ledger (GLT0)). By default
, after activation of the new general ledger, the reports only read the
new general ledger accounting, the "read from Classic general ledger"
flag is not set.
Take into account that any update of the classic general ledger tables
should be deactivated after you run and verify the first end-of period
closing, at the latest. If you update the tables for both the
conventional and new general ledger, you will generate too many unneeded
records.
If the parameter "Read Classic General Ledger (GLT0)" is marked, F.01 will not
read New g/l information (FAGLFLEXT). -
Hi, how can we compare two reports, for eg, there is modification to the standard report and a copy of that in zreport, now by writing a report I have to display where the changes have been done.
Is this possible ?
Thanks,
Varun.K.Hi Varun,
To compare two ABAP and show you the differences in both ABAP.
Transaction SE39 will do this.
Hope it helps you
Regrds
Mansi -
Deleting copies of standard reports and copies of initial selections
Hi,
I've been creating a copy of a standard report and adjusting it to customer requirements. The point is that, in the middle, I created several copies of the standard report and several copies of the initial selection values.
Find attached 2 screenshots with corresponding questions:
1.Selection:
a) why am I seeing first 3 lines in white background and next 3 with grey background, what does this color differentiation mean?
b) I am trying to delete all these entries except the first one, however, it happens that when picking them the Delete button is not getting enabled, any idea?
c) it happens some times that, when selecting any of the none selected entries, it automatically gets unchecked and the initial value gets checked again, any idea?
2. Reports:
d) similar question to (b), for some reason Delete button is not getting enabled, any solution?
Hope you can help me.
Thanks and regards.
Alejandro.Hi,
I've been creating a copy of a standard report and adjusting it to customer requirements. The point is that, in the middle, I created several copies of the standard report and several copies of the initial selection values.
Find attached 2 screenshots with corresponding questions:
1.Selection:
a) why am I seeing first 3 lines in white background and next 3 with grey background, what does this color differentiation mean?
b) I am trying to delete all these entries except the first one, however, it happens that when picking them the Delete button is not getting enabled, any idea?
c) it happens some times that, when selecting any of the none selected entries, it automatically gets unchecked and the initial value gets checked again, any idea?
2. Reports:
d) similar question to (b), for some reason Delete button is not getting enabled, any solution?
Hope you can help me.
Thanks and regards.
Alejandro. -
Submiting reports with copies option from forms
Hi ,
I am submitting a report from the form with copies = 3 , but the copies are printed 3x3 = 9.
Does any one know why it is printing 3 x 3 instead of 3
the code is as follows:-
IF par_destination = 'PRINTER' THEN
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESFORMAT, v_desformat);
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESNAME, par_printer_name);
ELSE
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESFORMAT, v_desformat);
END IF;
SELECT substr(par_rep_filename,1,instr(par_rep_filename,'.')-1) || '-' || v_next_reqno
|| '.' || DECODE(v_desformat, 'dflt', 'lst', 'wide', 'lst', v_desformat)
INTO v_rep_output_filename
FROM DUAL;
v_file_path := v_file_path || v_rep_output_filename;
v_url_path := v_url_path || v_rep_output_filename;
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_SERVER, v_repserver);
v_report_other_params := 'mode='||v_mode || ' orientation='||par_orientation || ' paramform=no'
||' copies='||3||' blankpages=no'
|| ' ' || par_rep_user_params;
message('other value -'||v_report_other_params);
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_OTHER, v_report_other_params);
v_rep_instance := RUN_REPORT_OBJECT(v_repid);
Please could some one help me with this.
Thanks
BainHi,
if copies='||3||' isn't the problem, as it should be 'copies=3' then I would check the user parameters you append at the end.
Frank -
Hi,
Could some one point in the right direction - we are trying to finalize the reporting tool.
We have worked with BI-Publisher(not as dynamic) and Discoverer(formatting a big issue) - trying to find a tool that would overcome the limitations that these 2 tools have.
We want to be able to use Oracle Db, VPD, set client_id using OPD.Net, integrate with web application as key requirements. By same token would like to be able to create dynamic reports which allows a great deal of flexibility. Is there such a reporting tool?
Any ideas much appreciated.
Thanks!Hi
I'll try and answer your questions.
1. Xml, Sql(either a view or stored proc) as input
data sourceYou can base an Apex report on a view or mod/plsql procedure, or use xmldb.
2. support odp.net providerAs I understand it odp.net is a tool used by .net to access Oracle. Apex is a database tool so all the data and code, everything is in the database.
3. Work with VPD - virtual private database Yes.
4. single-sign-on, and setting client_identifier on
connection.Yes
5. Integrate with existing web application(asp.net
2.0)Not sure what integration you want.
6. This tool is free right, to be used with Oracle
10g database.Free and can be used with 10g or 9i databases.
Rod West -
Select options in report painter COPA
In report painter when we go to "maintain selection options", the
"exclude from selection" is greyed out.
Any suggestions?HI, guess SAPNET 516557 will help.
BR Christian -
HI Gentlemen,
I have to run my report twice, once with 'Original' and once with 'Copy' in the top margin. It works fine if I execute it twice, supplying a text parameter from outside. However, this generates two PDF files. This is undesirable--they should be kept together. Is it possible to be aware: the first copy is done, change the field value to 'Copy' and do the second run with it? I did not find anytyhing so far. I did a lot of experiments with format triggers etc.--no success. Could you help me?
Thanks in advance, kind regards from
Miklos HERBOLYCopies>1 only means that the output is duplicated. So, no you cannot change the layout directly. See this thread for a solution:
Number of copies -
EPMA application app compare reporting incorrectly
Hi,
we've just started using 11.1.2.3 for Planning Apps and ASO cubes. One thing that has changed is the ability to refresh security from within the planning application. So we now do the same refresh from within the application library just asking to create filters. However when we do this the subsequent application compares show the apps as having no metadata differences and the library says that they are in sync - which they are but the changes that we didn't ask to be deployed are in the planning app but not the Essbase app - any ideas why might occur? Or are there alternatives for this sort of security refresh.?
Thanks,
Jeremy.To clarify the original post - the way to avoid this the is to use the Manage->Database option from within planning that option has not gone (but still doesn't explain the behaviour of the deploy)
Maybe you are looking for
-
How can I get a folder to appear in the Folder list when I am trying to import pictures?
There is a folder on my hard drive that does not appear in the list of folders in the import dialog. I have tried expanding all the other folders around it (my photos are filed by date of capture) to see if it was somehow imported as a subfolder. It
-
Can't install Adobe Flash MAC OS 10.8
Hi, I've tried to install Adobe Flash for my Macbook pro 10.8 but it kept failing... The install folder is downloaded successfully into my download folder but when I open it, instead of an install box message appearing, my other aplication opened (my
-
Been having issues for a few months now and haven't been able to find any solutions online. I'm having an issue where I can not send messages to certain numbers and I am just receiving the "Can't send" message as if I had no signal. What's even more
-
How do I get an app out of my contacts app on my iPhone
I accidentally moved my Mailbox app into my contacts on my iPhone 4S. I cannot get it out.
-
How do I open password protected email attachment?
Does anyone know how to open a password protected attachment in email. My email will not download the attachment if it is password protected