Comparing fields from multiple entities in the same report (report builder 1.0)

Created a model that contains 2 entities. I open that model in report builder 1.0. When I drag a field from one of the entities into the design area, i can no longer see the other entity or use any of the fields from that other entity.
I need to use fields from both entities in the same report (join tables). In management studio i would simply write a query and join tables but i cannot figure out how to do this in report builder. Once i select a field from one entity
how do i select fields from more than one entity and drag them into the same report.

Would it be possible for you to send me instructions for this? I am not that familiar with SQL coding but I can definitely figure it out. I have been wanting to get information on reports from multiple entities for a very long time! The only way I can
currently do it is have our document management software people write the report for me for quite a large fee. I would much rather do this myself. Right now I can select a few fields from one entity (the main one), some from a second entity under that one,
but I cannot add any fields from a third entity! Quite annoying and hindering! Thank you :)

Similar Messages

How can i select some row from multiple row in the same group of data

I want to select some row from multiple row in the same group of data.
ColumnA
Column B
1 OK
1 NG
2 NG
2 NG
3 OK
3 OK
I want the row of group of
ColumnA if ColumnB contain even 'NG'
row , select only one row which Column B = 'NG'
the result i want =
ColumnA Column B
1 NG
2 NG
3 OK
Thank you

That's some awful explanation, but I think this is what you were driving at:
DECLARE @forumTable TABLE (a INT, b CHAR(2))
INSERT INTO @forumTable (a, b)
VALUES
(1, 'OK'),(1, 'NG'),
(2, 'NG'),(2, 'NG'),
(3, 'OK'),(3, 'OK')
SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
FROM @forumTable f
LEFT OUTER JOIN @forumTable f2
ON f.a = f2.a
AND f.b <> f2.b
GROUP BY f.a

Removing keyword from multiple images at the same time

None of the documented methods seem to work for me.
1     Select all the images. Go to Metadata > Remove Keyword [my keyword] - the keyword is only removed from the image that is selected in the batch - i.e the one that has the yellow border round it to show it's the active image.
2     Select all the images, enter [my keyword] in the Add Keyword field when Keyword Controls is visible and press Shift + Enter - does the same thing as 1 above (removes it from the active image only).
3     Select all the images, Shift Click on the keyword that I have in my Keyword Controls in the Control Bar - does the same things as 1 above.
So all these methods, which are supposed to work, do not work for me. The removal of the keyword is only applied to the image that has the yellow border showing it to be the currently active image in the selected batch - the remaining selected imaged still retain the keyword. I can remove it "one at a a time" but it would be great if I could find a solution as to why this isn't working.
Any ideas?
If it helps, I'm running Aperture 3.1.3 in OS X 10.6.8.
thanks
Alan

Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active. Marching ants, anyone? Or a pink selection marquee?
At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active. There is no such change in the Browser.

Importing Photos and Music from Multiple users on the same Mac

I am the same person with multiple users on one iMac. I need to have the same pics and music files on all of the user names on the one computer.
I have the family pack MobileMe plan.
Where are the files located for the photos and music in iTunes?
I would like to import them from one user to another user on the same computer.
Thank you

Welcome to the Apple Discussions.
If you Import the files from one User to another then you will use double the disk space on your HD as you will have multiple copies of everything. Why not simply share the files between accounts?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

HT2693 How to download pictures from multiple iPhones with the same Apple ID?

I have multiple iPhones (e.g. iPhone 4S, iPhone 5) registered under the same Apple ID however i only manage to download the pictures in my iPhone 5 via iCloud.
How do I retrieve the remaining photos that was uploaded to iCloud previously from my older iPhones with the same Apple ID?
Pls help!!!

Hi edristiew,
Are the photos that you are referring to still in Photo Stream? Remember, Photo Stream has limits which are outlined in this article:
iCloud: Photo Stream limits
http://support.apple.com/kb/HT4858
If the photos are still stored in Photo Stream, this resource may answer your questions about how to extract them (Mac or PC):
iCloud: Photo Stream FAQ
http://support.apple.com/kb/HT4486
If the photos are no longer in Photo Stream, but are in your camera roll, you can import them to your computer:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Cheers!
Matt M.

Zip'ing files from multiple folders to the same zip file

Could somebody recommend a method to create a zip file with file contents from multiple folders? Or is there an application I can drag and drop a bunch of files to zip em?

First highlight all of the folders or files. If they're not right next to each other, or on the same drives, hold down the Command key while clicking to choose the next without losing previous choices.
Once they're all highlighted, right click on any highlighted item and choose "Compress xxx Items".

How to acquire data from multiple dataports at the same time

Hi,
I studied the multithreading section of Labview, but still have no idea
how to make it work. Let me briefly explain my situation. I need to
develop a program that can control and acquire data from 4 serial
ports. I have 4 buttons to control starting or stopping acquisation
from the corresponding port. Every acquisation process is a while loop.
How can I start a new acquisation loop (eg. from COM2) while the loop
for COM1 is still running? In other words, I wish the 4 loops running
independently, and are controlled by their corresponding buttons only.
Thanks for any suggestion.
Jin

Hi Anonymous,
If I were you, I'd create one VI (call it Port.vi) to listen to one port - then make it reentrant. Drop 4 copies of Port.vi on your Main diagram. Port.vi inputs could include a VISA reference, a "Start/Stop" notifier and maybe a "Quit" occurance. Wire to each copy of Port.vi a unique VISA reference and a unique "Start/Stop" [boolean] notifier - let all the copies share the same Quit Occurance.
In Main, have one event case for each of your stop buttons. When a button is pressed, send the appropriate Start/Stop notifier!
... of course you could accomplish the same thing with four identical loops right in your main diagram, but the more complex the port-handling gets, the easier it will be to manage in one place instead of four.
Cheers!
When they give imbeciles handicap-parking, I won't have so far to walk!

Airplay from Multiple Sources on the Same Network

Hi,
I have a question that I was hoping someone could answer. I recently upgraded to iTunes 11 and bought a B&W A7 Airplay system. It works fine (bar the odd drop out). My question is, if I buy another A7 for another room and someone else in my house on the same network wants to airplay music from thier iOS device to that speaker whilst I am using iTunes to play music through the speaker in my room will that cause a problem?
In other words, can you have 2 different speakers recieving an airplay stream from 2 different devices?
Thanks in advance.

Hi JObbern
If all the printers are on the same network you won't be able to change the network name on the printer.
You can change the name of the printer though on each computer. Depending on the operating system you are using, go to the printers window, right click and rename. Example Office1, Office 2.
If the option isn't available you can go to the printer window and add a printer and change the printer name through the wizard.
Hope that helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Does uploading iPhoto libraries from multiple Macs with the same photos create duplicates in the new Photos app?

I have 4 Macs and I had the same iPhoto library on each of them. When I chose to turn on the iCloud Photo Library on each of them, each Mac, each one of them uploaded the library to iCloud Photo Library.. Now it appears that I have many duplicates in the new Library. Is it adding each of the 4 libraries to the mix? It's a real problem as I have 25,000 pictures - 70GB in my library. So paused the upload on 2 of the Macs about half way through in case it is creating duplicates, until I get some answers. Any help would sure be appreciated.

I'm in the same boat as well. I'm doing one mac at a time and seeing how it works. Howev the upload is so slow, who knows when it will be done.

Updating a field in multiple tables at the same time

Hi All,
I have a table with right and wrong values of a field 'id'. I want to replace the wrong values in all the tables at all_tab_columns with the right values. I did the following and it did not work. Please help.
CREATE OR REPLACE PROCEDURE Clean_ID_Proc(v_id number) IS
right_id number;
v_table_name varchar2(100);
BEGIN
    Select correct_id into right_id from tb_id
    where wrong_id = v_id;
    FOR table_cur IN (select * from all_tab_columns
                        where column_name = 'ID')
    LOOP
      EXECUTE IMMEDIATE 'update '||table_cur.table_name||' set id = '||right_id||' where id ='|| v_id;
    END LOOP;
END;The error I have been getting is :
[1]: ORA-00942: table or view does not exist
[1]: ORA-06512: at "schema.CLEAN_ID_PROC", line 12
[1]: ORA-06512: at line 1
Thanks in advance

user7415666 wrote:
Hi All,
I have a table with right and wrong values of a field 'id'. I want to replace the wrong values in all the tables at all_tab_columns with the right values. I did the following and it did not work. Please help.
CREATE OR REPLACE PROCEDURE Clean_ID_Proc(v_id number) IS
right_id number;
v_table_name varchar2(100);
BEGIN
Select correct_id into right_id from tb_id
where wrong_id = v_id;
FOR table_cur IN (select * from all_tab_columns
where column_name = 'ID')
LOOP
EXECUTE IMMEDIATE 'update '||table_cur.table_name||' set id = '||right_id||' where id ='|| v_id;
END LOOP;
END;The error I have been getting is :
[1]: ORA-00942: table or view does not exist
[1]: ORA-06512: at "schema.CLEAN_ID_PROC", line 12
[1]: ORA-06512: at line 1
Thanks in advancewhat is the actual table_name of the table being updated?
who owns this table?
which USER owns & runs posted code?
why did you bother populating TB_ID table instead of doing the UPDATE at that time?

Do you have a way that allows you to save attachments from multiple emails at the same time?

I have thousands of emails that I have put into Thunderbird's Local Folders, but now would like others in to access the attachments and don't want to go email by email to save off the attachments, time is prohibitive, so was hoping there is a way to select groups of messages and save off all the attachments at one time. Please let me know. THANKS!

I'd install FiltaQuilla, which provides the ability to save attachments as files. Create a filter to do the attachment saving.
Creative use of the QuickFilter should let you select the required messages, then use ''Run Filters on folder''.
https://addons.mozilla.org/en-US/thunderbird/addon/filtaquilla/
http://www.ramsden.org.uk/3_How_to_install_Add-ons_in_Thunderbird.html

What's the problem with having multiple users with the same UID?

I've got three edit systems connected to the SAN using open directory off our server.
I want all edit systems to have read/write access to everything created. I don't need to protect anything from any of the systems. With all three systems logged on using the same user, I never have to change permissions.
The other cool thing about this is that Final Cut Pro will let me know if someone else is modifying a project that I have open with the warning:
“The project "projectName" has been modified externally. If another user is working on it, saving will overwrite their changes. Do you still want to save?”
This sounds great, right?
RED FLAG!!!! Apple gives the warning in this article:
http://docs.info.apple.com/article.html?artnum=302450
"You should not allow two users with the same UID to access an Xsan volume at the same time."
So why is it bad to have two (or more) users with the same UID?
I can see that in some situations it means that you can't prevent people from read/write privileges. But I don't want to restrict privileges.
What am I missing? With all of these warnings, it seems like if I do this my edit systems could all explode or something. Please help me understand the potential ramifications of having three users have the same UID.

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Merge iweb sites from multiple user accounts on same computer

With the previous iweb version, my children created their own iweb sites on their own users, but all under my own .mac account. It worked great.
But now with the new "upgraded" iweb '08, that isn't allowed anymore.
So, I created a new user on our computer for all of us to use to maintain our multiple iweb accounts on.
How can I move multiple iweb sites from multiple users on the same computer into one user?

Each of the user's work in iWeb will be contained in a single file, Domain.sites2, which can be found in this location on the hard drive for each user account. You will need to copy all of these Domain.sites2 files to an external drive, or, at the very least, burn them to a disk to make them transferable from one user account to another. A flash drive also works great for this.
Once you have made all of these Domain files accessible from the new user account that you created, you will still have a formidable task ahead of you, i.e., publishing separate sites, from separate Domain.sites2 files, to the same .Mac account/directory. In other words, bringing all of these Domain files together for access by a single user account will not solve the problem. You may very well be able to solve the problem with things the way they are, but it will involve some shuffling of Site's files on the iDisk prior to publishing.
The method I'm going to give you has worked well for me. So far, here in the forums, I've read posts from (2) other users who were also successful. Conversely, I know of at least (3) other users who have been unsuccessful with this approach. I sure hope it works for you.
Open System Preferences and go to .Mac. Turn syncing off, if it is on, and leave it off.
Now, in Finder, navigate to the current Site files on your iDisk, following this path:
Go/iDisk/My iDisk/Web/Sites/NameOfSiteFolder
Drag the Site folder that is named for your site, (not the directory Site folder), back one level on the iDisk, into the Web folder. This is where some run into difficulties--you may get an error message that the folder is "in use, and cannot be moved". I have never gotten this message, and am able to move my Site's folders around with no problem on the iDisk.
If you are successful moving the folder, choose one of your other accounts on your machine, launch iWeb, and Publish all to .Mac. The existing site on the server will not be deleted. Now, go back to the iDisk and move that site folder, (the one you just published), back one level, again, to the root Web directory. Publish your next site, from your next account.
When you are finished publishing sites, just move the Site folders back to their original location on the iDisk--Web/Sites/SiteFoldersHere. All sites will be accessible from a browser using the web.mac.com/username/nameofsite url.
It is important to use the Publish all to .Mac command in iWeb. A simple Publish to .Mac command will not put the correct index.html file in place on the server.
Post back and inform us of your success.
-Mark

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

How can I remove multiple copies of the same song from the iTunes listing?

How can I remove multiple copies of the same song from the iTunes listing. The program seems to be picking up the same songs from, for example, my user area and my public area in the C drive

As above, Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library, however it is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve/merge ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2

Comparing fields from multiple entities in the same report (report builder 1.0)

Similar Messages

Maybe you are looking for