Comparing incoming file name having timestamp with system time.

Hi,
The scenario is File to FIle.
i have to read the incoming file name which will be having time stamp.
compare the time stamp with the system time .
if the difference in time is within specified time then send the file to target location,else send a mail that file is not placed in target location.
please enlight me on how this scenario can be done.
Thanks,
Akkasali.

if you mean the actual time stamp on the file and not the file name then ref: http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID2044216150DB12410233167314983393End?blog=/pub/wlg/15154
else if you mean the time stamp on the file name itself then use dynamic configuration and then read the file name and do the further processing - /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name

Similar Messages

How to get the incoming file name using JMS adapter and SOAP adapter

Hi Everybody,
   In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to SAP IDOC.
my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
EX:
<IDOC
<REF>price<DateTimestamp>.txt</REF>
</IDOC>
Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
Thanks
raj

If they are passing it in message id or correlation id,
you can access it using
<xsl:variable name="dynamic-conf"
        select="map:get($inputparam, 'DynamicConfiguration')" />
    <xsl:variable name="dynamic-key"
        select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
    <xsl:variable name="dynamic-value"
        select="dyn:get($dynamic-conf, $dynamic-key)" />
Check this:
http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
Beena.

Mac mini having issues with system preferences retaining settings

Mac mini having issues with system preferences retaining settings; this was present with Mavericks and now Yosemite after installation. Did try removing com.apple.systemprefs.plist file (library/preferences folder) to trash, but couldn't find it in trash in order to empty it. Upon reboot the file is still missing. Please don't suggest reloading Yosemite, have very slow internet connection, Yosemite took 7-8 hours to D/L.
Any troubleshooting suggestions out there? thanks

Well, I'd open Font Book, it's included with OSX, & see what it says for Validate & Duplicates.
I would also like to add I am new to Apple computers and I'm doing my best to stay up to par with whats what and understanding!
No problem, we were all new to everything once, do let us know if you need more help or clatification.

Saving a file pdf file and the file name appears on a PC with + signs in the name of the file - How do I eliminate the file name coming up with the + signs?

A pdf file is created from a word document and then posted to our dealer portal. It allows the dealer to open the pdf file and then either print and/or save off to a hard drive. The issue is the file name has + signs in between all the words. Is there a way to eliminate the file names coming up with the plus signs? It is not being saved that way. Any help you can provide would be appreciated.

Use a proper file name for the WORD document. MS decided several years ago to allow spaces, but that is not standard and is likely what the issue is. A good alternative is to replace spaces in file names with underbars, "_".

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this.

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.

I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

Create table interval partition on a column timestamp with local time zone

Hi
Does anyone have an example for 11g on how to create a table with interval partitioning on a column defined as timestamp with local time zone. I know it's possible. the following does not work.
CREATE TABLE KOMODO_EXPIRED_RESULTS
TEST_EVENT_KEY NUMBER NOT NULL,
HPS_DEVICE_KEY NUMBER NOT NULL,
RCS_DEVICE_KEY NUMBER,
EVENT_START_TIMESTAMP TIMESTAMP(6) with local time zone NOT NULL,
BOOTROMVERSION NUMBER,
CHANNELNUMBER NUMBER,
CLIENTVERSION VARCHAR2(4000 BYTE),
ETHERNET_CRC_ERROR_COUNT NUMBER,
ETHERNET_DROPPED_PACKETS NUMBER,
ETHERNET_THROUGHPUT NUMBER,
ETHERNET_TRAFFIC_IN NUMBER,
ETHERNET_TRAFFIC_OUT NUMBER,
IPADDRESS VARCHAR2(4000 BYTE),
KOMODO_ID VARCHAR2(4000 BYTE),
LASTREBOOTTIME VARCHAR2(4000 BYTE),
OSVERSION VARCHAR2(4000 BYTE),
RECEIVER_AUDIOACCESSCONTROLER NUMBER,
RECEIVER_AUDIOBUFFEROVERFLOWS NUMBER,
RECEIVER_AUDIOBUFFERUNDERRUNS NUMBER,
RECEIVER_AUDIOCODEC VARCHAR2(4000 BYTE),
RECEIVER_AUDIODATADROPPED NUMBER,
RECEIVER_AUDIODATATHROUGHPUT NUMBER,
RECEIVER_AUDIODECODERERRORS NUMBER,
RECEIVER_AUDIODESCBUFFERUNDER NUMBER,
RECEIVER_AUDIODESCCRYPTOERROR NUMBER,
RECEIVER_AUDIODESCDATADROPPED NUMBER,
RECEIVER_AUDIODESCDATATHROUGH NUMBER,
RECEIVER_AUDIODESCDECODERERRO NUMBER,
RECEIVER_AUDIODESCDRMERRORS NUMBER,
RECEIVER_AUDIODESCPTSDELTA NUMBER,
RECEIVER_AUDIODESCPTSDELTAHAL NUMBER,
RECEIVER_AUDIODESCSAMPLESDROP NUMBER,
RECEIVER_AUDIODSPCRASHES VARCHAR2(4000 BYTE),
RECEIVER_AUDIOPTSDELTAHAL NUMBER,
RECEIVER_AUDIOSAMPLESDECODED NUMBER,
RECEIVER_AUDIOSAMPLESDROPPED NUMBER,
RECEIVER_AUDIOUNDERRUN NUMBER,
RECEIVER_BITRATE NUMBER,
RECEIVER_BUFFEROVERRUN NUMBER,
RECEIVER_BYTESCCRECEIVED NUMBER,
RECEIVER_BYTESRECEIVED NUMBER,
RECEIVER_CHANNEL NUMBER,
RECEIVER_DECODERSTALL NUMBER,
RECEIVER_DISCONTINUITIES NUMBER,
RECEIVER_DISCONTINUITIESPACKE NUMBER,
RECEIVER_DRIFT NUMBER,
RECEIVER_DROPPEDPACKETSUNTILR NUMBER,
RECEIVER_ECMLOOKUPERROR NUMBER,
RECEIVER_ECMPARSEERRORS NUMBER,
RECEIVER_PMTCHANGED NUMBER,
RECEIVER_REBUFFER NUMBER,
RECEIVER_SELECTCOMPONENTAUDIO NUMBER,
RECEIVER_TIMELINEDISCONTINUIT NUMBER,
RECEIVER_VIDEOACCESSCONTROLER NUMBER,
RECEIVER_VIDEOACCESSCONTROLUN NUMBER,
RECEIVER_VIDEOBUFFEROVERFLOWS NUMBER,
RECEIVER_VIDEOBUFFERUNDERRUNS NUMBER,
RECEIVER_VIDEOCODEC VARCHAR2(4000 BYTE),
RECEIVER_VIDEOCRYPTOERROR NUMBER,
RECEIVER_VIDEODATADROPPED NUMBER,
RECEIVER_VIDEODATATHROUGHPUT NUMBER,
RECEIVER_VIDEODECODERERRORS NUMBER,
RECEIVER_VIDEODRMERRORS NUMBER,
RECEIVER_VIDEODSPCRASHES VARCHAR2(4000 BYTE),
RECEIVER_VIDEOFIFORD NUMBER,
RECEIVER_VIDEOFIFOSIZE NUMBER,
RECEIVER_VIDEOFRAMESDECODED NUMBER,
RECEIVER_VIDEOFRAMESDROPPED NUMBER,
RECEIVER_VIDEOPTSDELTA NUMBER,
RECEIVER_VIDEOPTSDELTAHAL NUMBER,
RECEIVER_VIDEOUNDERRUN NUMBER,
SUBNETMASK VARCHAR2(4000 BYTE),
TUNER_BITRATE NUMBER,
TUNER_BUFFERFAILURE NUMBER,
TUNER_CCPACKETSRECEIVED NUMBER,
TUNER_CHANNEL NUMBER,
TUNER_DATATIMEOUTS NUMBER,
TUNER_DELIVERYMODE VARCHAR2(4000 BYTE),
TUNER_DROPPAST NUMBER,
TUNER_FILL NUMBER,
TUNER_HOLE NUMBER,
TUNER_HOLEDURINGBURST NUMBER,
TUNER_HOLEDURINGBURSTPACKETS NUMBER,
TUNER_HOLETOOLARGEPACKETS NUMBER,
TUNER_MAXIMUMHOLESIZE NUMBER,
TUNER_MULTICASTADDRESS VARCHAR2(4000 BYTE),
TUNER_MULTICASTJOINDELAY NUMBER,
TUNER_OUTOFORDER NUMBER,
TUNER_OVERFLOWRESET NUMBER,
TUNER_OVERFLOWRESETTIMES NUMBER,
TUNER_PACKETSEXPIRED NUMBER,
TUNER_PACKETSPROCESSED NUMBER,
TUNER_PACKETSRECEIVED NUMBER,
TUNER_PACKETSWITHOUTSESSION NUMBER,
TUNER_PARSEERRORS NUMBER,
TUNER_SRCUNAVAILABLERECEIVED NUMBER,
TUNER_TOTALHOLEPACKETS NUMBER,
TUNER_TOTALPACKETSEXPIRED NUMBER,
TUNER_TOTALPACKETSRECEIVED NUMBER,
TUNER_UNICASTADDRESS VARCHAR2(4000 BYTE),
RECEIVER_TUNEDFOR NUMBER,
MACADDRESS VARCHAR2(4000 BYTE),
RECEIVER_TOTALAVUNDERRUNS NUMBER,
RECEIVER_TOTALDISCONTINUITIES NUMBER,
SERVICEID VARCHAR2(4000 BYTE),
DRIVEPRESENT VARCHAR2(4000 BYTE),
STB_STATE VARCHAR2(32 BYTE),
PREV_EXPIRED NUMBER,
PREV_HOLES NUMBER,
PREV_RECEIVED NUMBER,
PREV_TIMESTAMP TIMESTAMP(6),
PREV_REBOOT VARCHAR2(4000 BYTE),
TOTALPACKETSEXPIRED_RATE NUMBER,
TOTALHOLEPACKETS_RATE NUMBER,
TOTALPACKETSRECEIVED_RATE NUMBER,
CONSTRAINT KOMODO_EXPIRED_RESULTS_PK
PRIMARY KEY
(HPS_DEVICE_KEY, EVENT_START_TIMESTAMP)
USING INDEX
TABLESPACE HPS_SUMMARY_INDEX
TABLESPACE HPS_SUMMARY_DATA
PARTITION BY RANGE (EVENT_START_TIMESTAMP)
INTERVAL( NUMTODSINTERVAL(1,'DAY'))
PARTITION DEFAULT_TIME_PART_01 VALUES LESS THAN (TIMESTAMP' 2010-08-01 00:00:00.000000000 +00:00')
LOGGING
COMPRESS FOR ALL OPERATIONS
TABLESPACE HPS_SUMMARY_DATA
NOCACHE
PARALLEL ( DEGREE DEFAULT INSTANCES DEFAULT )
MONITORING
/

I am not sure it can be done.
SQL> create table sales
2 (
3 sales_id number,
4 sales_dt TIMESTAMP(6) with local time zone NOT NULL
5 )
6 partition by range (sales_dt)
7 interval (numtoyminterval(1,'MONTH'))
8 ( partition p0901 values less than (to_date('2009-02-01','yyyy-mm-dd')) );
create table sales
ERROR at line 1:
ORA-14751: Invalid data type for partitioning column of an interval partitioned
table
SQL> ed
Wrote file afiedt.buf
1 create table sales
2 (
3 sales_id number,
4 sales_dt TIMESTAMP(6)
5 )
6 partition by range (sales_dt)
7 interval (numtoyminterval(1,'MONTH'))
8* ( partition p0901 values less than (to_date('2009-02-01','yyyy-mm-dd')) )
SQL> /
Table created.

I am having trouble with face time , it was working well yesterday and today am not able to use it due to an error that won't let me log in !!!

I am having trouble with face time , it was working well yesterday and today am not able to use it due to an error that won't let me log in !!!

I have the same exact issue. There is number of these post, but still not an answer. hope someone post an answer soon

System interrupt with system time

Hi,
I observed the number of system interrupt has correlation with system time. The high number of system interrupt has high system time.
Can someone help me to understand it? What invoke the system interrupt?
Thanks,
--Ying

The note at the bottom of the first link from Alex Verboon has the following, which worked on my Domain-associated Windows 7 system:
Synchronizing with an Internet time server
You can synchronize your computer clock with an Internet time server. This means that the clock on your computer is updated to match the clock on the time server, which can help ensure that the clock on your computer is accurate. Your clock is typically updated
once a week and needs to be connected to the Internet for the synchronization to occur.
Note
If your computer is on a domain, you can't synchronize your clock with an Internet time server.
Open Date and Time by clicking the Start button, clicking Control Panel, clicking Clock, Language, and Region, and then clicking Date and Time.
Click the Internet Time tab, and then click Change settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Automatically synchronize with an Internet time server, select a time server, and then click OK.

Infpackage with logical file name having current year and month

Hello all,
I am using the FILE transaction to maintain the logical file name for infopackage loads in BW.This logicalfile name is to be assigned to physical csv file in AL11 directory.
This csv file would be having the current month and date at the end of the name for e.g for the month of April 2008,the file name would be say xx_200804.csv.I wanted to know if by using the palceholder <YEAR><MONTH> in the physical file name ,would the current month date and month be automatically concatenated at the end of file name ?Has anyone used this option before?

yes it does work,i tried out finally and the system picks current month and year

File extraction -File name is timestamped

Hi Team,
We are loading the data using flat file. The file will be stored in the application directory. we created a logical fiel name and it is used in the data source.
My problem is every day the file is uploaded to the applicaiton directory and the file name will be appended with time stamp
for example
file_01022011123445
file_02022011042015
I tried to handle this by creating an abap routine ,but i am unable to get the exact file name since the timestamp field is dyanamic.I even tried to read the file names from the applicaiton directory using following function modules
SUBST_GET_FILE_LIST
F4_DXFILENAME
FILE_GET_NAME
But it didnot worked. Any suggestion will be appreciated.
Thanks,
Jim
Edited by: Jim Jose on Feb 2, 2011 1:04 PM

Hi,
Your file naming convention seems to be "file_ddmmyyyyhhmmss". That means you already know the first 13 characters of the filename you need. ("file_" is constant, the next 8 characters come from sy-datum)
The FM SUBST_GET_FILE_LIST accepts wildcards, so you could give the FILENM parameter as *. It would give you the names of all the files in the directory. After that, it is a matter of ignoring all the files which do NOT begin with those 13 characters. If you have one file being created in the directory for every day, this should work
Regards,
Suhas

Same file name at Target with change in file extension

Hi,
I am working on File to File scenario. I need to create target file name similar to the source file name. This can be achieved by using ASMA. But my requirement is to change the file extension for the target file.
For example:
Source File u2013 InvoiceNotification.txtu2026.Then target file should create as
Target File - InvoiceNotification.csv
This can be achieved by using OS Command unix script in the receiver communication channel.
Is there any better way of doing this..say something like Dynamic Configuration or Variable substitution?
Thank you.

Hi Achuth,
I think you are doing content conversion at the receiver side. Go ahead with ASMA, get the file name.
DynamicConfigurationconf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKeyFileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","FileName");
conf.put(FileName, a);
return "";
In the receiver file adapter, keep the extension as .CSV. That's enough.
Else you can follow as said by Abhishek Salvi. Either way you can achieve the requirement.
Thanks,

File name should be with sequence

Hello Experts,
I am working on file(NFA) to SFTP scenario with out mapping . I am getting file from AL11 folder with the name of XXXX_20150404033752.csv and receiver side (in PI) im getting file name as XXXX_20150404-040420-142.csv. But it should be 20150404033752_001_csv with out "-" and it should be sequence of 001, 002,... .
For example, if the files were given a name corresponding to a time stamp, the first file might be called 20150404040420_001. The second would be called 20150404040420_002. These files were both named after the date and time stamp April 04, 2015 at 04:05:02.
Without doing any mapping can I do this?
Thanks in advance,
Reddy.

>>>I am working on file(NFA) to SFTP scenario with out mapping . I am getting file from AL11 folder with the name of XXXX_20150404033752.csv and receiver side (in PI) im getting file name as XXXX_20150404-040420-142.csv
If you want to append a counter to the source filename
enable ASMA for file name in sender and receiver channels
Set the file construction mode in receiver channel to counter
under counter def, maintain "_" as prefix and counter to 000
>>For example, if the files were given a name corresponding to a time stamp, the first file might be called 20150404040420_001. The second would be called 20150404040420_002.
Do you expect two files with the same timestamp? There should be some difference in the filename right as you can't have 2 files with samename.
If appending the counter doesn't work, either you have to go for a java mapping/AM to set the file-name as you want.
Dynamic file name for pass-through scenario - Process Integration - SCN Wiki

How to incorporate File name and timestamp automatically into select and save file dialog box?

Hello,
i am trying to incorporate the file name which is inputed by the user along with the timestamp into the selected and save file dialog box. Can you help?
Thanks
Solved!
Go to Solution.

You can pass a default file name to the 'File Dialog' Express VI.
Use the 'selected path' output to open the file.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Attachments:
FileDialog.vi ‏21 KB

Outgoing file name as incoming file name??

Hi,
I have a scenario FILE >XI>FILE.
I need to write the outgoing file with the same name as the incomming file.
For example the incomming file is abc.txt. The outgoing file from SAP should be abc.txt.
Any SUGGESTIONS!!
Regards
Vijaya

Hi,
you have to create a module to the file receiver adapter that will insert the filename into the payload of the XML message
sap note:
819761 - XI 3.0 File Sender: Accessing source file name from a module
then you can use <b>variable substitution</b> (from SP12)
to name your output file
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
this is how you should do it:)
Regards,
michal

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

Comparing incoming file name having timestamp with system time.

Similar Messages

Maybe you are looking for