Compatibility with NIKON DF

Hi, Lightroom 5 does not read my RAW-files from my NIKON brand new DF-model. When will the update be done ?

Assuming you are using LR 5.3 as claimed, another possibility is that you’ve transferred the NEFs with Nikon Transfer or viewed them with ViewNX and NT or VNX are too old and are corrupting your NEF files, making them unreadable to Adobe products.
You should use the versions of Nikon products that came with your new Nikon camera, not older versions that used to work with an older Nikon camera.
There is a utility that will correct the corruption available, here:
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Similar Messages

IPhoto compatibility with Nikon Compressed RAW files?

Hi,
Has anyone tried using iPhoto with the compressed RAW files generated by a Nikon D300s? Are they supported?
The 300s can create types of RAW files: 12- vs 14-bit and uncompressed vs lossless compressed. Which of these 4 types is/are supported by iPhoto?
Thanks,
Mike

Hi,
I looked into it a bit further, and apparently Apple does not support ANY TYPE of RAW file from the D300s! This is the camera that Nikon (who is not exactly a minor player in the digital camera market) describes as their "flagship" DSLR!
(Even more frustratingly, the D300s has the same sensor and image processor as the currently-supported D300, so the RAW file formats should be very similar and Apple shouldn't have to do too much work to add D300s support!)
On the other hand, Photoshop already supports it:
http://www.adobe.com/products/photoshop/cameraraw.html
EDIT: yes I know I should "submit feedback"... already done...
-Mike
Message was edited by: Mike G.

HT3946 What about RAW file compatibility with Nikon D4?

Having trouble with RAW files from Nikon D4, didnt have issues before update, any help?

My apologies for the vague question. To be more specific after installing the latest update to Aperture, RAW files from my D4 after being transfered into Aperture cannot be opened. Message saying Aperture does not support these files. Not sure if it has anything to do with XQD card, all formatted as usual. Stumped.
thank you kindly for your time.

Compatability with Nikon D800

I imported my D800 nef files into lightroom 4 and found that you can't then open them in photoshop CS5. I then tried opening them directly into photoshop and that didn't work either. On spec I re imported the files into lightroom but converted them to DNG during import. Then I was able to transfer them to photoshop with no problem.
This may help some of you who just bought the fantastic D800.
Mike

There is a post in the Lightroom Journal recently which will explain the issue fully. Support for your camera was only done in LR 4.0 which is the equivalent of ACR 7 and also in ACR 6.7 release candidate.
http://blogs.adobe.com/lightroomjournal/

SATA11 is it compatable with all controller cards

I want to add 500gb HD's to my G4 Giga and know I need a SATA controller card, I am considering this one card pic is this card compatable with SATA11 hard drives?
Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW Mac OS X (10.4.9) wireless network

Thanks Japamac, can I go through this deadhead style...
You can install as many OS's as you want. When you
set your Startup Disk Preferences, you are able to
select the OS that you want, as well as the disk that
you want.
Does this mean I have to make a partion thing on the same disk for each (even the same) OS?
Do I use the original install disks to do this?
Another way to select startup disk/OS, is to boot
while holding the Option key. This will open the
Startup Manager, and allow you to select which and
where you want to boot from.
This is the screen I remember from my Apple Care Plan Help Desk days
It is a good idea to have a second (and third)
bootable disk in your system.
Is the third disk on a partion thing ( I have researched this and have found, using "disk utility" I can make "partitions", if I understand correctly, my machine will "see" a partition as a separate disk, am I miles off?
That way, heaven
forbid, should one disk have trouble booting, you can
use the Startup Manager to select an alternate disk,
and then diagnose and repair the ailing disk from
there.
Do I use "disk utility" from another partition disk to do this?
This is, actually, a very important thing to
have in your system. by all means, install the OS on
the other disk.
A partition on the 120gb, how big should the partition be?
Remember, to keep both disks backed up. So, don't
give up on your external drives all together. They
are VERY useful.
This is where you are going to hate me... I dont have any externals or back ups.... this is why I am trying to work out what to do... I back up my photo's to DVD when I have enough, its not good practice because it can take a months worth before I have time to physically go through all the work to decide what I will archive to DVD, I would love for all of the work to automatically copy itself to a safe place.
While we are on the subject, a very good way to
backup, is to use Super Duper. This is a clone
utility. SD will copy bit for bit, your drive, and
then make that backup bootable. This is a very nice
feature. Also, after that, you can use the Smart
Update feature, which updates any changes of a volume
to it's clone. This way, you always have an exact
copy of your system and data. Invaluable!
This is obviously what I need... I will download it and try to understand its functions
I like OWC, myself. Even with shipping and tariffs to
Japan, it is most often cheaper to do so. Also, the
company is very reputable, has great service (try
their live chat) and stands behind what they sell.
OWC also has lots of install tutorial video (and
PDF's) in their support section. Check it
out.
I have trusted OWC since you recommended them for my processor upgrade and have just ordered the SATA controller from them and am going to get a 500gb internal HD for now until I can learn to rationalise my disk space... at the moment my files are just copies of themselves on the same disk (120gb)
Hey Japamac... I have to say thank you to you sir, you have obviously put a lot of time and effort into your reply and I really do appreciate it...
As Arnie says.... "I will be back"
G4AGP(450)Sawtooth,
2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon
9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD,
Ratoc USB 2.0, QCam Ultra, Nikon Coolscan
Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW Mac OS X (10.4.9) wireless network
Powermac G4 Giga-ethernet Dual 1.2ghz 100bus 2 Gig Ram 2xHD 80gb+120gb USB1+2/FW Mac OS X (10.4.9) wireless network

Aperture 3.6 and iPhoto 9.6 crashes with nikon .nef files (raw format)

I've got a problem with raw files support for my Nikon D700 camera. Even though this camera is listed here: https://www.apple.com/pl/aperture/specs/raw.html both Aperture and iPhoto see .nef files as a white image. If I try to edit one, both apps crash.
How can I get a raw files support in these applications?
I have updated os, apps and even tried to remove and reinstall raw camera bundle as it was described here RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10). No luck.
My OSX is installed on SSD, while iPhoto library is on the secondary HDD drive.

Norbert, I cannot find the post you are referring to.
Have you had the problem with Aperture 3.6? This is surprising, since the Aperture 3.6 released is supposed to fix this bug, see the release Notes: Aperture 3.6 Release notes
Aperture 3.6 Update
Adds compatibility with OS X Yosemite.
Fixes an issue that could cause Aperture performance to slow down while browsing through images with onscreen proofing enabled.
Fixes an issue where Aperture could become unresponsive in rare cases when adding to a shared photo stream.
Fixes an issue that could cause Aperture to unexpectedly quit when using the Write IPTC Metadata to Originals feature.
Aperture no longer displays the alert, “This library has been opened with a newer version of Aperture.” when using Library First Aid with libraries previously opened in iPhoto.
Do you remember, which of the presets in Library/Application Support actually is causing the problem, since deleting all of them is causing a lot of work to restore the custom settings? It would be great to know the specific file.

Is elements 8 compatable with camera raw 6.3

i have a nikon d3100 and i use elements 8 which has camera raw 6.2 and i need camera raw 6.3 but ive heard its not compatable with elements 8, does this mean that the only option i have is to buy elements 9 or 10. cheers

You have two alternatives:
(1) Upgrade to PSE 10. (2) Download and install the free Adobe DNG converter to convert your NEF files to the Adobe Raw format and the files will open in all versions of PSE (keep your original NEF’s as backups and for use in Nikon software)
Windows download click here DNG Converter 7.1
Mac download click here DNG Converter 7.1
You can convert a whole folder of NEF images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

CS2 Raw File issues with Nikon D90

Just saw the post on Nikon D90 non compatibility with CS2 raw file format. Questions are where to go from here. Running Windows XP with a AMD Athlon (tm) XP3000+ 2.16 ghz 448 mb ram. Is Cs4 or Cs5 compatible with my system. I used a D70 for years and had no problems. What is going on here? I can probably add ram to get the 1000 mb of ram but what about the rest? Is there another alternative other than a new system?

Caution!
Before plunking down the $$$ for CS5, look for the several threads around here where people are discovering their older AMD processors are not compatible with Photoshop CS5!
For example: http://forums.adobe.com/thread/630771
I'm not familiar with the processors in the AMD lineup, but it's possible yours will not run Photoshop CS5 until such time as Adobe releases an update.
-Noel

Camera Connector with Nikon D2x and 5G 60gb iPod

Has anyone had experience with the D2x (Nikon) and the camera connector on a 5G 60gb iPod?
The camera is compatable with Mass Storage and PTP. The camera works great with iPhoto...plug it in and iPhoto opens and you click the button to download.
Also, I see that the new iPod has a longer lasting battery. Does this help when downloading a large card.
By the way, I called Belkin and their camera connectors are NOT compatable with the new 5G models and the guy said that there is nothing on the drawing board.
G5 Dual 2ghz Mac OS X (10.4.4) 3.5gb RAM; 400gb HD

I purchased the 60gb iPod-Video (5G) and after several failed attempts I found the proceedure to upload photos on to the iPod using an Apple camera connector with my D2x. Here goes:
First, reset the ipod (just a precaution...hold down the center button with the Menu button for 6 sec). The screen will go black with a golden apple in the center. The menu will display after a short period.
Turn on the ipod (if it isn't already on from the above proceedure).
Plug in the camera connector to the iPod (without the USB cable attached).
Attach the USB cable to your camera and turn on the camera.
Plug in the cable from the camera to the camera connector which is attached to the iPod.
Wait 20-30 sec and it should work.
I tested the speed in both PTP mode and Mass Storage mode. The import for both was 200mb.
PTP = 3minutes 10 sec
Mass Storage 1 minute 59 sec.
The battery did go down a lot (about 1/4 after both imports), but after you detach the camera connector and go back to the main menu, it seems to go back up to about 95% full.

Windows 8 and itunes 11 compatibility with an ipod

I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8. This was months ago.
I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
Kia
[email protected]

Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is adobe photoshop cs2 compatable with windows 8?

Is adobe photoshop CS2 compatable with windows 8?

I have removed and re-installed CS2 twice now and still get the same library application error.
DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
Thank you,
Eric

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Itunes 9.1 not compatable with XP?

Tried to download 9.1 and keep getting error message that says: The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. Continuing installation of this software may impair or destabilize operation of your system either immediately or in the future.
I have reboot computer several times, etc. Have never had a problem with any updates to itunes or iphone till now.
Thoughts?

Itunes 9.1 is definitely NOT compatible with Windows XP at this time. The culprit appears to be the Bonjour services package. I recently attempted to install via 3 methods: through Apple Update, via direct download over wireless and via direct download over wired connection. The result was the same in all three instances: when attempting to start itunes 9.1, it would immediately crash with a message "Itunes has encountered a problem and needs to close...". Upon checking the application event viewer (control panel > performance & maintenance > administrative tools > event viewer) I was able to determine that the itunes crashes were due to Bonjour in all but one instance. Bottom line: steer clear of itunes 9.1 until Apple gets their comparability issues corrected.

Compatibility with NIKON DF

Similar Messages

Maybe you are looking for