Compilation failed for Pro*C program in Oracle 10g

Hi,
During migration from Oracle 9i to 10g, I get the followin error when compiling by connecting to 10g database. The same file is getting compiled successfully for 9i database. Could any one help me to resolve this issue.
Syntax error at line 65, column 25, file /usr/include/iso/string_iso.h:
Error at line 65, column 25 in file /usr/include/iso/string_iso.h
extern int strcmp(const char , const char *);*
*........................1*
PCC-S-02201, Encountered the symbol "char" when expecting one of the following:
Error at line 0, column 0 in file src/ksopoact.pc
PCC-F-02102, Fatal error while doing C preprocessing
I use the ProC options: SQLCHECK=SEMANTICS PARSE=FULL CODE=KR_C MODE=ORACLE DBMS=NATIVE UNSAFE_NULL=NO FIPS=NO
My operating system is SunOS 5.8.
Thanks in advance,
Carthyc.

Hi,
Is this on the same server? Any differences in the environment settings (other than the obvious necessary changes like ORACLE_HOME, etc)? Does your code have a prototype that might mismatch? Is the code in ksopoact.pc passing a "char *"? Any failures "further up" the chain?
Regards,
Mark

Similar Messages

  • How to compile and run PRO*C programs in Linux

    Hi all,
    This is my first post in this forum.
    I have Oracle 9i installed in linux platform .
    How can i compile and run Pro*C programs in linux.(i mean any commands or procedure to run these programs)
    please help me in this regard.
    Thanks in advance,
    Trinath Somanchi,
    Hyderabad .

    (1) How to compile the Pro*c program U got to have a makefile to compile a Pro*c program. It helps u in compiling and creating an excutable. Once U have created a makefile , just call "make" and it will do the compilation and create the executable as well.
    For a sample makefile visit
    http://asktom.oracle.com/~tkyte/proc_makefile/
    (2) How to run the Pro*c program ? and Once U have created an executable, U shall call that directly as any other linux command. Make sure U have the permissions to run the executable. If not give the permissions using chmod 777 executable
    (3)How to get the output of the program ?Question 2 and 3 are the same. I mean running and getting a output are the same

  • Exception:: XSP Java Compiler :: Compilation failed for _index.  The compil

    Dear all
    My organization has a web cum wap site running on XML - XSL. When i uploaded a modified file it started giving me the following error
    java.lang.Exception: XSP Java Compiler: Compilation failed for
    _index.java The compiler has run out of memory. Consider using the
    "-J-mx<number>" command line option to increase the maximum heap
    size.
    The site is running on Linux platform ( with Apache, Jserv, Cocoon).
    can anybody help me to resolve this problem.
    with thanxs and regards
    Rohit Joshi
    (Mobile Application Developer)
    Globe Communication (http://www.globecommunication.net)
    Nil - 26 Malviya Nagar, Delhi, India.

    Thank you very much.
    But the as i had wrote that am using Apache, Jserv and Cocoon, my site is in XML , XSL format..i can do logical work in XML and representation in two formats one is HTML and one in WML through XSL. so only i have to make all these files and put them in to theirs respective place, htdocs. Then , as u know, it automaticaaly parsed, compiled and processed through parsers and processors provided by servers. So i don't need to compile each java file. Now u suggest me what i have to do? Is their any procedure that Cocoon Engine automaticaaly can increased this size.
    Thanxs and regards
    Rohit Joshi

  • Will oracle 8.3.7 Pro *c Programs run with 10g?

    Hi all,
    This may not be suitable for this forum but please advise me
    We are planning to upgrade the oracle 8.3.7 to 10grel2
    This is in AIX 4.3.We got MQSeries version 5.2 installed.
    Our PRO *C programs are compiled in 8.3.7..
    will the PRO *C programs will run and communicate with 10g.We receive messages from MQ and manipulate the database.
    Will the existing programs run with 10g
    Help needed URGENT
    Thanks

    Your Pro*C will need to be version 9.2 compliant, to run against 10g so may need some reworking. See here for more detail:
    http://oraclesvca2.oracle.com/docs/cd/B14117_01/win.101/a96111.pdf

  • Error ORABPEL-10902 compilation failed, for an almost empty bpel  file

    Thank you for reading my post
    I have a problem with a bpel process in Oracle SOA suite 10.1.3.1 and its compliance jdeveloper (10.1.3.1).
    when i try to compile the appliaction and deploy it to server it returns and error which i include in this message.
    Here is the bpel file
    <process name="Puchase_Request" abstractProcess="no"
             enableInstanceCompensation="no" suppressJoinFailure="no"
             targetNamespace="www.testi.com"
           xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
             xmlns:xsd="http://www.w3.org/2001/XMLSchema"
             xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
             xmlns:ns1="http://testi2.com/"
             xmlns:ns2="www.testi.com"
             xmlns:ns3="www.testi.com" >
                  </process>and here is the error message it returns
    Problem is that i get an error like :
    Error:
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "F:\appplication\bpel\Puchase_Request.bpel", XML parsing failed because "".
    [Potential fix]: n/a.
    Does any one faced such problem?

    Hi
    I too got similar problem
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "bpel.xml", XML parsing failed because "undefined part element.
    In WSDL at "file:/C:/JDeveloper/jdev/mywork/CICWorkSpace/CICBPEL/bpel/CICBPEL.wsdl", message part element "{http://xmlns.oracle.com/orchestration}confirmationMessage" is not defined in any of the schemas.
    Please make sure the spelling of the element QName is correct and the WSDL import is complete.." [Potential fix]: n/a.
    WSDL
    =====
    <definitions
    name="CICBPEL"
    targetNamespace="http://xmlns.oracle.com/CICBPEL"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC"
    xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg"
    xmlns:client="http://xmlns.oracle.com/CICBPEL"
    >
    <types>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org" xmlns:ns1="http://www.globalcompany.com/ns/sales"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://www.1sync.org" schemaLocation="CatalogueItemConfirmationProxy.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/CICBPEL" schemaLocation="CICBPEL.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/orchestration" schemaLocation="CanonicalConfirmationMessageSchema.xsd"/>
    </xsd:schema>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC" xmlns:ns2="http://xmlns.oracle.com/orchestration"
    xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" schemaLocation="selectmsg_table.xsd"/>
    </xsd:schema>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns4="http://www.1sync.org"
    xmlns:ns1="http://www.globalcompany.com/ns/sales" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:ns3="http://xmlns.oracle.com/pcbpel/adapter/db/top/CICSPECIFIC" xmlns:ns5="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg"
    xmlns:ns2="http://xmlns.oracle.com/orchestration" xmlns:client="http://xmlns.oracle.com/CICBPEL">
    <xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/selectmsg" schemaLocation="message.xsd"/>
    <xsd:import namespace="http://xmlns.oracle.com/orchestration" schemaLocation="CanonicalConfirmationMessageSchema.xsd"/>
    </xsd:schema>
    </types>
    <message name="CICBPELRequestMessage">
    <part name="payload" element="ns5:M4uDmdMessagesCollection"/>
    </message>
    <message name="CICBPELResponseMessage">
    <part name="payload" element="ns4:envelope"/>
    </message>
    <message name="canonical_CICMessage">
    <part name="payload" element="ns2:confirmationMessage"/>
    </message>
    <portType name="CICBPEL">
    <operation name="initiate">
    <input message="client:CICBPELRequestMessage"/>
    </operation>
    </portType>
    <portType name="CICBPELCallback">
    <operation name="onResult">
    <input message="client:CICBPELResponseMessage"/>
    </operation>
    </portType>
    <plnk:partnerLinkType name="CICBPEL">
    <plnk:role name="CICBPELProvider">
    <plnk:portType name="client:CICBPEL"/>
    </plnk:role>
    <plnk:role name="CICBPELRequester">
    <plnk:portType name="client:CICBPELCallback"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    I dont understand the problem

  • NoClassDefFoundError for Java Concurrent Program in Oracle Apps

    Hi,
    I am accessing the Oracle Apps application which is installed in local server(Within the network).
    I am trying to execute Java Concurrent Program in oracle apps (in Windows XP Professional). I did the following.
    1. Created the concurrent program executable with Execution file name
    as AvailableProg and Execution File Path as
    oracle.apps.fnd.cp.request (this is where AvailableProg resides)
    and Method as Java Concurrent Program.
    2. Created the concurrent program and set the Options as -cp JAVA_CON.
    3. Created a environment variable JAVA_CON (In Windows XP) with the
    values D:\apps.zip and
    D:\oracle.apps.fnd.cp.request.AvailableProg.class.
    4. Registered the concurrent program.
    5. While I submitted the request I got the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError:
    oracle/apps/fnd/cp/request/Run.
    Can anybody help me in resolving this issue?
    Is there any documents available in executing java concurrent programs?
    Please do the needful..
    Thank You....

    Hi
    I am having the same issues. Here are the setup I have for all the variables:
    $ echo $AF_CLASSPATH
    /u001/oracle/deltacomn/util/jre/1.1.8/lib/rt.jar:/u001/oracle/deltacomn/util/jre/1.1.8/lib/i18n.jar:/u001/oracle/deltacomn/java/appsborg.zip:/u001/oracle/deltaora/8.0.6/forms60/java:/u001/oracle/deltacomn/java
    $ echo $JAVA_TOP
    /u001/oracle/deltacomn/java
    $ echo $AFJVAPRG
    /u001/oracle/deltacomn/util/jre/1.1.8/bin/jre
    $ echo $CLASSPATH
    /u001/oracle/deltacomn/util/jre/1.1.8/lib/rt.jar:/u001/oracle/deltacomn/util/jre/1.1.8/lib/i18n.jar:/u001/oracle/deltacomn/java/appsborg.zip:/u001/oracle/deltaora/8.0.6/forms60/java:/u001/oracle/deltacomn/java:/u001/oracle/deltaappl/ncr_custom/ncrx/1.0.0/java
    Please help.
    Thanks
    AE

  • SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program

    Hello,
    We have installed MSCS cluster on OFS for SAP ERP EhP4 SR1.
    This installation is successful and both the nodes are running.
    However, as soon as i execute any of the DB13 jobs, I get the mentioned error.
    SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error.
    This is stopping us from releasing the system to the end users, which effectively delays our GO-Live till the problem is resolved. 
    Please advise what all steps or notes are to be followed to make DB13 working in MSCS clusrer.
    Regards
    Ankita

    Hi,
    Briefly describe your system architecture ?
    Have you followed/implemented  SAP Notes [446172|https://service.sap.com/sap/support/notes/446172]  and [657999|https://service.sap.com/sap/support/notes/657999] carefully, by comparing your existing settings?
    Have you analyzed the log entries  in SM21, also at Operating system level Logs ?
    If you Database is on another host then SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> (a TCP/IP connection) will play an important role for executing SAPXPG command. Test SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> RFC connection with its Trace logs.
    Regards,
    Bhavik G. Shroff

  • Pros and Cons af Oracle 10g upgrade to 11g

    Hi Basis Expert,
    We have an requirement of SAP upgrade which includes BW 3.5, CRM and R/3 (4.7).
    These components needs to be upgraded to the latest version
    BW 3.5 to BI 7.0
    R/3 (4.7) to ECC 6.0
    and also CRM upgrade to the new version
    The OS used is AIX and DB used is oracle 10g.
    Can anybody share the pros and cons of oracle DB upgrade from 10g to 11g after SAP upgrade.
    Regards,
    Anil.

    Hi DatabaseSAP and others,
    Thanks for your reply
    I started with the Oracle 11g software installer. But it gave an error during 71%. Error is
    Error in invoking target 'rat_on part_on dm_on olap_on sdo_on' of makefile '/oracle/DBW/112_64/rdbms/lib/ins_rdbms.mk'.
    See '/oracle/DBW/oraInventory/logs/installActions2011-10-10_12-04-03PM.log' for details.
    Abort      Retry         Continue
    But when i was going thorough the installActions2011-10-10_12-04-03PM.log . I could find that there are 7 arguments which is failed.
    Below are the argument  details
    1)INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    Verification Result for Node:p19849dev136
    INFO: Expected Value:1024
    INFO: Actual Value:9223372036854775807
    INFO: -
    INFO: *********************************************
    INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:16384
    INFO: Actual Value:3048
    INFO: Error Message:PRVF-4354 : Proper hard limit for resource "maximum user processes" not found on node "p19849dev136" [Expected = "16384" ; Found = "3048"]
    INFO: Cause: Hard limit for the resource does not meet the requirement on the specified node.
    INFO: Action: Modify the resource limits to meet the requirement.
    2)INFO: OS Kernel Parameter: ncargs: This is a prerequisite condition to test whether the OS kernel parameter "ncargs" is properly set.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:128
    INFO: Actual Value:6
    INFO: Error Message:PRVF-7543 : OS Kernel parameter "ncargs" does not have proper value on node "p19849dev136" [Expected = "128" ; Found = "6"].
    INFO: Cause: Kernel parameter value does not meet the requirement.
    INFO: Action: Modify the kernel parameter value to meet the requirement.
    3)INFO: OS Kernel Parameter: tcp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_low" is properly set.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:9000
    INFO: Actual Value:32768
    INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
    INFO: Cause: Kernel parameter value does not meet the requirement.
    INFO: Action: Modify the kernel parameter value to meet the requirement.
    4)INFO: OS Kernel Parameter: tcp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_high" is properly set.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:65500
    INFO: Actual Value:65535
    INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
    INFO: Cause: Kernel parameter value does not meet the requirement.
    INFO: Action: Modify the kernel parameter value to meet the requirement.
    5)INFO: OS Kernel Parameter: udp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_low" is properly set.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:9000
    INFO: Actual Value:32768
    INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
    INFO: Cause: Kernel parameter value does not meet the requirement.
    INFO: Action: Modify the kernel parameter value to meet the requirement.
    INFO: -
    6)INFO: OS Kernel Parameter: udp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_high" is properly set.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    INFO: Expected Value:65500
    INFO: Actual Value:65535
    INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
    INFO: Cause: Kernel parameter value does not meet the requirement.
    INFO: Action: Modify the kernel parameter value to meet the requirement.
    7)INFO: Users With Same UID: This test checks that multiple users do not exist with user id as "0".
    INFO: Severity:CRITICAL
    INFO: OverallStatus:VERIFICATION_FAILED
    INFO: -
    INFO: Verification Result for Node:p19849dev136
    WARNING: Result values are not available for this verification task
    INFO: Error Message:<CV_VAL>root,|super,|zero,|</CV_VAL><CV_ERES>0</CV_ERES>
    INFO: Cause:Cause Of Problem Not Available
    INFO: Action:User Action Not Available
    INFO: *********************************************
    Please let me know what is the 7th (last one) argument.
    Regards,
    Anil Shenoy

  • Tool for Viewing 3D data in Oracle 10g

    Hi,
    I had uploaded the 3D DGN format Data from FME Oracle Suite to Oracle 10g database.
    the following tables were created
    TESTASH_SDODIM TABLE
    TESTASH_SDOLAYER TABLE
    TESTASH_SDOGEOM TABLE
    TESTASH_SDOINDEX TABLE
    TESTASH TABLE
    When we are trying to browse the data using AutoCAD of any other viewer, we are unable to find this table in that particular user. Whereas if we run a sql command and run a sql query we are able to get the record count.
    Can you suggest something to view this data.
    Thanks and Regards
    Ashish Dhawan

    Ok.. I'd bet then that there are no entries in USER_SDO_GEOM_METADATA AKA MDSYS.SDO_GEOM_METADATA_TABLE. FME view needs to find an entry in there to show you it in the dialog so you can pick the table. The same holds true for views of tables, there needs to be an entry, although I find it somewhat ironic that it then goes on to not know what projection the data is in.
    Also, the viewer will pick the first SDO_GEOMETRY column it finds. So if you have more than one, you will then need to make a view for just that column.
    Anyway, add an entry into the table, and you should be good to go.
    Bryan

  • Looking for a Web Interface for Editing Data in an Oracle 10g Database

    Greetings all!
    My organization is implementing Oracle 10g Release 2 Enterprise version. We have an employee who will need to edit data in the database which will hold staff phone numbers, email addresses, and other contact information. This employee will never need to administer the database or develop tables, queries, etc. They will only need to add and remove rows of data and edit text values stored in a database table.
    Does Oracle 10g have a built-in, browser-based tool that can be used to edit data in a table via a friendly user interface? If no, can you please recommend an easy to use tool for editing data in an Oracle database?
    Thanks for any help you can provide!
    Rachel

    Justin,
    Thanks very much for the tip!
    Do you know if Oracle 10g has any kind of built-in tool for editing data? I have heard of "The Vault", but that appears to be a tool for administering database users, reports, etc. I am looking for some kind of tool that shows the data in a grid layout (like Microsoft Excel) and allows someone to edit and save data in that grid. A web-based tool would be best, but a desktop tool (especially if it's already part of Oracle 10g) would also be good.
    Thanks again,
    Rachel

  • Locale values for the arabic db in oracle 10g

    Please suggest me the locale values for the Oracle 10g client/server that can store arabic data.
    Please also suggest me the best value for the "Database character set".
    Note: Both my client and server will be installed on the Arabic version of Windows XP.

    Possible character sets for Arabic are AL16UTF16, AL32UTF8, AR8ISO8859P6, AR8MSWIN1256, UTF8
    I suggest to use AL32UTF8 as database character set.
    so NLS_LANG at client side would be e.g. ARABIC_QATAR.AL32UTF8 ({NLS_LANGUAGE}_{NLS_TERRITORY}.{CHARACTERSET})
    Check [Locale Data|http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/applocaledata.htm] for other possible supported languages, territories, character sets. (you can even see recommended character sets in this page)

  • Creating sublevels under levels for a dimension in AWM Oracle 10g

    In Analytic Workspace Manager Oracle 10g, How can I create more sublevels under a particular level in a dimension?
    for eg. Year is a dimension.It has 2 levels , Quarter and Month.
    Under Quarter level I want to have Qtr1 and Qtr2 as sublevels.
    Under Month level I want to have Jan,Feb,Mar,Apr,May,June as sublevels.
    so that Qtr1 has Jan,Feb,Mar, and Qtr2 has Apr,May,June

    You need to do this in your source table.
    The source table can look something like this
    qtr_id, qtr_name, month_id, month_name
    1 , Qtr1 , 101 , january
    1 , Qtr1 , 102 , febuary
    1 , Qtr1 , 103 , march
    2 , Qtr2 , 104 , april
    2 , Qtr2 , 105 , may
    2 , Qtr2 , 106 , june
    Then map it to the dimension, and maintain it.
    Keep in mind that the member(id) fields need to be unique. I.E january 2007 and january 2006 cannot have the same id.
    Ragnar

  • Migrate P6 Pro Rel7 DB from Oracle 10g Express to SQL server 2008

    Please advise the steps needed to migrate my P6 Professional Rel7 (laptop) Oracle 10g Express to P6 Enterprise Rel7 (server) migrating over to SQL server 2008.
    I don't want to lose any of my activity codes during the migration.
    Thanks in advance for any comments or guidance.
    CH

    You can use migrate.bat (Media folder/database/installation). Enter the details of the source (oracle db) to destiny (SQL) . The app will migrate everything, the projects, activities, uds, users, filters, layouts, etc.. .
    Regards,
    Pablo

  • EMAIL NOTIFICATION FOR DBMS_SCHDEULER JOB STATUS IN ORACLE 10G

    Hi All,
    I want to configure email notification for the job which is running through BUMS_SCHEDULER in oracle 10g
    Please provide the steps for configuration of the email notification.
    Thanks
    Mak

    Is your problem that you do not know how to send an email from Oracle 10g? If so then you use the UTL_MAIL package.
    Here's an example of calling it as part of a scheduler chain, not strictly what you're asking for but this lets you define success and failure steps and call each one based on the status of previous steps.
    BEGIN
    DBMS_SCHEDULER.CREATE_PROGRAM (
       program_name           =>'prg_Export_Success',
       program_type           =>'PLSQL_BLOCK',
       program_action         =>q'[BEGIN
                                    UTL_MAIL.SEND (
                                       sender      => 'who_its_from',
                                       recipients  => '[email protected]',
                                       subject     => 'subject line',
                                       message     => 'the message',
                                       mime_type   => 'text/plain; charset=us-ascii');
                                    END;]',
       number_of_arguments      => 0,
       enabled                  => TRUE,
       comments                 => 'Email success');
    end;
    BEGIN
    DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
       chain_name      =>  'Export',
       step_name       =>  'stp_EXPORT_SUCCESS',
       program_name    =>  'PRG_EXPORT_SUCCESS');
    END;
    /... then define appropriate rules.

  • WAR - how to continue compiling even when compile fails for some jsp's

    i am trying to pre-compile all my jsp's and find out all the compilation
              errors in all the jsp's..
              i am defining a war app and i am making the weblogic server to precompile
              the jsp's.. i control this from web.xml
              the problem is
              weblogic starts compiling the jsp's and when it hits the first error it
              bails out.. i doesn't precompile the rest of the jsp's..
              how do i make weblogic server to continue compiling the rest of the jsp's??
              anyone??
              

    You sure can run a Windows Form and while it is visible, run code in the Powershell script, and communicate the information from the 'main' script  to the form.
    To do this you need create a separate Powershell runspace and dependent on situation either use shared memory and timer in the form or delegates to directly call form elements
    Please check my article at codeproject for extensive journey of using all core Windows Forms, WPF, Selenium with Powershell for tasks which often require various option prompts.
    http://www.codeproject.com/Articles/799161/Dealing-with-Powershell-Inputs-via-Basic-Windows-F
    You find there over 40 common Windows form patterns  ( prompts, grids, check/radio boxes, progress bars of many forms, tree views, item lists, passwords, tool tips, system tray widgets, browser controls, examples of using p/invoke, hosting custom controls,
    dealing with selenium webdriver, dealing with selenium-unfriendly file upload dialogs etc. ) all covered there - working code for every example is provided, and the code is hosted on github.
    Routine daily devops tasks of executing Powershell scripts in a complex environment suddenly become a less challenging task. Web scraping becomes more fun

Maybe you are looking for