"Compiler errors occurred when generating a Windows Forms wrapper...

"Compiler errors occurred when generating a Windows Forms wrapper for ActiveX control 'AxNationalInstruments.TestStand.Interop.API'."

Sorry, I accidentally hit enter as I was composing this post. Please see my full post at:
http://forums.ni.com/ni/board/message?board.id=330&message.id=5633

Similar Messages

Adding Engine component causes: "Compiler errors occurred when generating a Windows Forms wrapper..."

I got this error when I tried to drop a TestStand Engine class onto my main form in VisualStudio.NET.
Compiler errors occurred when generating a Windows Forms wrapper for ActiveX control 'AxNationalInstruments.TestStand.Interop.API'
The error message went on to say that it saved the source in ./obj/AxInterop.TS.cs so I added that to the project. When I try to build it, I get this error:
The designer must create an instance of type 'System.Windows.Forms.AxHost' but it cannot because the type is declared as abstract.
I am using TestStand 3.0 evaluation, Version 7.1.3088 of Microsoft Development Environment 2003, and .NET Framework 1.1 Version 1.1.4322 SP1.
Is this aximp.exe problem?
Can someone suggest how to fix this?
Thanks,
Jeff

TestStand installs pre-built interop wrappers for the TestStand engine and all the TestStand UserInterface controls. You can find them in \API\DotNet\Assemblies\CurrentVersion\.
However, the best thing to do is usually to add the ApplicationMgr control to your .NET form and then call form.axApplicationMgr1.GetEngine() to get the engine. Doing this automatically adds references to the interop assemblies to your project. You can find this control in the TestStand tab of your .NET toolbox when you have a form active.
Ideally, you should start with the .NET simple operator interface examples which are in \OperatorInterfaces\NI\Simple\CSharp\ and \OperatorInterfaces\NI\Simple\VB.Net\
- James

Compile Errors occured when simulink models including 'cmex' by SIT

I am trying to compile a simulink model to DLL with following softwares and hardwares.
Software:
LabVIEW 8.0.1
LabVIEW Realtime 8.0.1
Simulation Interface Toolkit 3.0
MATLAB R13
Visual C++ 6.0 Service Pack 4
Target Hardware:
PXI-1042RTPXI-8196
PXI-6289
When I tried to compile a model including 'cmex' function on Simulink to DLL, compile error about Visual C++ occured. Does SIT support the model including 'cmex' functions?
When I removed the function 'cmex', compiling is working correctly.
To import original model which is written by C or other language, I strongly want to use 'cmex' functions. To avoid the compile error, if you have any ideas, please let me know.
Thanks,
Tsugo

Hello Tsugo,
I believe that it is possible to compile a DLL for SIT from a model that contains a cmex function.
To tell whether the issue is caused by SIT or not, you can try changing the RTW target file from nidll.tlc to grt.tlc (in the model's Simulation Parameters dialog, look in the Real-Time Workshop tab), and see whether the compile error still happens. If the compiler error occurs with grt.tlc, then please refer to the documentation provided by The MathWorks Inc. on how to get your cmex functions to work in Real-Time Workshop®.
If the compiler error does not occur with grt.tlc, then please post the whole text of the compiler error.
Thanks!
Andrew

An unforeseeable error occurred when generating from the maintenance

Hi All,
When i am activating LGMST feature i am getting "Unforeseeable error I am defaulting max wagetypes and allowance grouping (Eg: 40/DD02 ) when i am trying to activate this feature this error is appearing how to solve this error
Regards,
Sita

than it shd not show any error
as 4.7 we can have only 20 wage types
where as 6.00 we can have 40
make sure u have defaulted all the wagte types of the IT 8 , 14 ,15 at a time or differently
Edited by: Sikindar on Jul 21, 2008 4:33 PM

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Error when creating SharePoint WebPart - "An error occurred while generating the project"

I am getting a Error in Visual Studio when I create a SharePoint Web Part.. "An error occurred while generating the project. Please see the Visual Studio Output window for more information."
I have checked the Output window and there is noting in it. When I click OK I get the next error that states "Object reference not set to an instance of an object".
After I click oky.. There seems to be files missing in the project menu..
I am using Visual Studio 2013 Ultimate and SharePoint 2013 Enterprise. These run on Windows Server 2012 R2..
This mind boggling.. Hope someone can help me..
Thanks

Hi,
For better troubleshooting, I suggest you do as the followings:
Create a new clean project. In this projcect, you can just create a new web part to check whehter it works.
Debug the project step by step and try to find which object reference not set to an instance of an object.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

7303030 patch - an error occured while generating forms library files

Hi,
While applying 12.1.1 upgrade patch, 7303030 i got an error at A1000 phase
"An error occured while generating forms library files" continue as if it were successful..
As we can generate forms after completion of the patch, i selected yes .
Later, i got "An error occured while generating oracle forms files", here also i selected to continue.
Please tell me is this the right way to continue the patch?
I didn't find any errors in worker logs files, after all workers have quit, this error was reported.
After completion of the patch what necessary steps i need to perform.
Thanks,

Hi,
The errors are due to missing of pre-req patch 6400501
Forms 10.1.2.3 Compilation against an 11.2 Fails with DB PL / SQL ERROR 801 ... internal error [60603] [ID 1065020.1]
After Applying the patch, successfully gerated forms.
I applied the patch 6400501 but still with the error internal error [60603], have something more to be done?
Thank you.

Errors occured when compile the bpel process

Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!

when compiled again without any change, the same errors like above are not occurs
more info.
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
BUILD SUCCESSFUL
Total time: 9 seconds
BUT, some errors occurs in BPEL PM server and in Console the process is not available
more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
process "AboutTest" (version "1.0") compiled sucessfully
15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
AboutTest.bpel" ...
16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
16:25:35,015 INFO [STDOUT] retun true;
16:25:35,015 INFO [STDOUT] ^
16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
16:25:35,031 INFO [STDOUT] retun true;
16:25:35,031 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
xa.cube.engine.types.bpel.CXPartnerLink.
16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] 4 errors
16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
process "AboutTest" (version "1.0") compiled failed.
16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
can not compile the bpel class generated from "AboutTest".
16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
ube> <BaseCubeSessionBean::logError>
if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.bind(CubeProcessHolder.java:1257)
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadAndBind(CubeProcessHolder.java:870)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadArchive(CubeProcessHolder.java:812)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
sArchive(CubeEngine.java:985)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
an.loadProcessArchive(BPELDomainManagerBean.java:390)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
inerInterceptor.invoke(StatelessSessionContainer.java:683)
16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
nvokeNext(AbstractTxInterceptor.java:84)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
hTransactions(TxInterceptorCMT.java:282)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
(TxInterceptorCMT.java:148)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
oke(SecurityInterceptor.java:111)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
ogInterceptor.java:191)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
nalInvoke(StatelessSessionContainer.java:331)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
:709)
16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
Unknown Source)
16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
tch(ReflectedDispatcher.java:60)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:62)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:54)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
ion.java:82)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
ke(AbstractMBeanInvoker.java:197)
16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
eanServerImpl.java:473)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
e(LocalInvoker.java:97)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
e(InvokerInterceptor.java:90)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
(TransactionInterceptor.java:46)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
curityInterceptor.java:55)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
or.invoke(StatelessSessionInterceptor.java:100)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
Container.java:85)
16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sMonitorWork.run(CubeProcessMonitorWork.java:129)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
orkerJob.java:51)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
hreadPool.java:267)
16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
why?
thanks

Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

Hello,
I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server. I imported a previous version successfully. The error I'm getting doesn't make a lot of sense to me, here it is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't generate files.
Possible reasons are:
1. The output file(s) might be read-only.
Remove the read-only attribute and import the Web service again.
2. A proxy DLL that LabVIEW created under the same file path exists in memory.
Restart LabVIEW and import the Web service again.
I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck. Any help is greatly appreciated.
Thanks,
Al Rauch
Merck & Co., Inc.

Aaron,
I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem. Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that. Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
Thanks,
Al

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Why do I get an unexpected error occured when I try to save a form as a pdf file?

Why do I get an unexpected error occured when I try to save a form as a pdf file?

Hi MsSunnyD,
Try uninstalling Adobe Acrobat using the Adobe cleaner Tool http://labs.adobe.com/downloads/acrobatcleaner.html
Then, try installing Adobe Reader XI. That should resolve the problem.
Regards,
Ajlan Huda.

Error in restore backup BPC 10 ( An error has occurred when generating user security settings)

Hi
restoring error - An error has occurred when generating user security settings
JPCHAPARRO is SAP ALL
UJBR >> Execute Restore >> Background
SM37 >> Execute
Jobs Summary >> BPC_BACKUP_PLSOLLA >> SPOOL
Error restore
security loading data ended in error.
An error has occurred when generating user security settings
SGL1
We found a note, but it appli to a previous version to which it is has
1643183 - BUI Roles are not created when copy environment
Best Regards
Juan Pablo

Hi Ridwansyah
Thanks for de reply!!!
Yes, restore the environment on the same system (SBW), but in new environment Backup à (PLSOLLA) Restore à (PLSOLLA_NIIF)
in ST22 shows the same error that is attached to in the original message
security loading data ended in error.
An error has occurred when generating user security settings
Yes, the user JPCHAPARRO this within a team assigned to a task profile.
another test
was conducted environment backup and ENVIRONMENTSHELL I restore in a new environment. This process went successful.
Best Regards
Juan Pablo

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Error occurred while generating PDF. Reason: ERROR_PDF_CONVERSION

I get an error generating my PDF whenever someone's name has a special character's in their name such as accents and diacritics.
Is this a bug or how do I properly set the charset for the <cfhtmltopdf> tag. I didn't have this issue with Coldfusion 9 and cfdocument. Any help in this regard would be much appreciated.
version: Coldfusion 11 Update 3 on Windows Server 2008 R2 on IIS 7.5
SEE STACK TRACE BELOW
coldfusion.document.webkit.PDFgErrorHandler$ServiceManagerConversionException: Error occurred while generating PDF. at coldfusion.document.webkit.PDFgErrorHandler.handleConversionError(PDFgErrorHandler.java:1 88) at coldfusion.document.webkit.HttpPDFRequestHandler.requestPDFGeneration(HttpPDFRequestHandl er.java:113) at coldfusion.tagext.lang.HtmlToPdfTag.processPDFgRequest(HtmlToPdfTag.java:1331) at coldfusion.tagext.lang.HtmlToPdfTag.handlePDFgConversionRequest(HtmlToPdfTag.java:1466) at coldfusion.tagext.lang.HtmlToPdfTag.convertToPDF(HtmlToPdfTag.java:1413) at coldfusion.tagext.lang.HtmlToPdfTag.doEndTag(HtmlToPdfTag.java:1551) at cfcfhtmltopdf_createPDF2ecfm2090701148.runPage(c:\inetpub\wwwroot\myapp.com\includes\docs \cfhtmltopdf_createPDF.cfm:25) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246) at coldfusion.tagext.lang.IncludeTag.handlePageInvoke(IncludeTag.java:736) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:572) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2986) at cfmethods2ecfm1148258034$funcSAVEPROXY.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\docs\ methods.cfm:472) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:420) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2424) at cfmethods2ecfm1658643382$funcPROCESSSTEP.runFunction(c:\inetpub\wwwroot\myapp.com\cfc\mem berResults\methods.cfm:377) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:487) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:383) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:95) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:334) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:533) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:648) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:457) at coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:251) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:480) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:42) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:142) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:30) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:156) at coldfusion.xml.rpc.CFCServlet.doPost(CFCServlet.java:348) at javax.servlet.http.HttpServlet.service(HttpServlet.java:646) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:199) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:314) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) at java.lang.Thread.run(Unknown Source)

Does anyone have any suggestions?
I've tried:
adding charset meta tags to the top of my outputted HTML contents that comprise the PDF
I've tried adding the <cfprocessingdirective pageencoding="utf-8" /> but doesn't seem to help.
#encodeForHTML(pdfHTMLVariable)# and even just tried encoding the individual variables that contained the special characters but that didn't seem to help anything as encoding them still won't work I'm assuming if the Charset is mis-matched.
Does the <cfprocessingdirective pageencoding="utf-8"> just have to be within the CFC method or does it need to be within the <cfhtmltopdf> tag?
Any input or things to try would be much appreciated as this is a regression for our app.
**As a side note: I would still just use CFDOCUMENT, but there was a different issue where the images were outputting a RED X where the image is supposed to be. Which from what I have been able to uncover has something to do with the server certificate not being trusted or something. However, our SSL provider is listed in the ROOT Certificate Authorities so not sure what's going on with that. Those images were being output with cfimage action of writeToBrowser .
I'd really like to fix the encoding issue does this have anything to do with language packs or missing languages of that sort? My app displays the page just fine when the UTF-8 charset meta tag is set.

VSS Error: "An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes."

Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
   Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
   Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,

Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
   Anbietertyp: Dateifreigabe
   Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
   Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
   Anbietertyp: System
   Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph

"Compiler errors occurred when generating a Windows Forms wrapper...

Similar Messages

Maybe you are looking for