Compiling a method exceeding 64K results in error

Hello Everyone,
I just encountered the problem when I compiled a method size that exceeds 64K. The compilation failed.
Any thoughts of inspiration here?
Thanks & Regards
Chakkar

Sabre's point is that if your method is so large as to break the compiler, it is not actual Object-Oriented code. It is almost completely impossible to program a proper OO method to that size. I suppose it's possible that your method is the exception that proves the rule, but I'm going with Occam's Razor on this one.
Check out Martin Fowler's book called 'Refactoring'. Perhaps that will give you some ideas.

Similar Messages

Getting "Method 'sign_in' does not exist" Error (using Charles)

This may be a bit off the FLEX field, and have to do with Zend Framework's ZEND_AMF class. Unfortunately I haven't been able to dig anything up, and comments posted on Wade Arnolds site have not received any responses, so I thought I'd give it a go here.
My ServiceController Class:
public function loginAction()
     $this->_helper->viewRenderer->setNoRender();
     $server = new Zend_Amf_Server();
     $server->setClass('LoginAmfService', 'LoginService');
     $server->setClassMap('CurrentUserVO', 'CurrentUserVO');
     $server->setProduction(false);
     print($server->handle());
My LoginAmfService class:
class LoginAmfService
      * Main login function.
      * @param string        $name
      * @param string        $password
      * @return CurrentUserVO
     public function sign_in($name, $password)
          $authAdapter     = new Zend_Auth_Adapter_DbTable(Zend_Registry::get('db'), 'users', 'user_name', 'password', 'PASSWORD(?) AND active = 1');
          $returnValue     = new CurrentUserVO();
          $authAdapter->setIdentity(htmlspecialchars($name))
               ->setCredential(htmlspecialchars($password));
          $authResult = $authAdapter->authenticate();
          if ($authResult->isValid())
               $userArray                          = $authAdapter->getResultRowObject(array('id', 'first_name', 'last_name', 'title', 'photo'));
               $returnValue->first_name     = $userArray->first_name;
               $returnValue->last_name          = $userArray->last_name;
               $returnValue->title               = $userArray->title;
               $returnValue->photo               = $userArray->photo;
               $returnValue->token               = $userArray->id;
          return $returnValue;
      * Function used to log people off.
     public function sign_out()
          $authAdapter = Zend_Auth::getInstance();
          $authAdapter->clearIdentity();
My SignIn FLEX module (the relevant portions):
     <mx:RemoteObject
          id="LoginRemote"
          destination="login"
          source="SignIn"
          showBusyCursor="true"
          fault="parentDocument.handleFault(event)"
     >
           <mx:method name="sign_in" result="signin_handle(event)" />
           <mx:method name="sign_out" result="signout_handle(event)" />
     </mx:RemoteObject>
     <mx:Script>
          <![CDATA[
               import mx.rpc.events.FaultEvent;
               import mx.utils.ArrayUtil;
               import mx.rpc.events.ResultEvent;
               import mx.controls.Alert;
               import com.brassworks.ValueObjects.CurrentUserVO;
               import mx.events.VideoEvent;
               [Bindable]
               private var this_user:CurrentUserVO = new CurrentUserVO();
               private function mdl_init():void
                    focusManager.setFocus(txt_username);
               private function signin_handle(event:ResultEvent):void
                         this_user = event.result as CurrentUserVO;
                         if (this_user.token == null) {Alert.show("Supplied login credentials are not valid. Please try again.");}
                         else
                              this.parentApplication.setUser(this.this_user);
               private function signout_handle(event:ResultEvent):void
               private function sign_in(event:Event):void
                    try
                         //Alert.show(txt_name.text + "|" + txt_password.text);
                         LoginRemote.sign_in(txt_username.text, txt_password.text);
                    catch (error:Error)
                         this.parentDocument.handleFault(error);
               private function sign_out(event:Event):void
               private function show_error(error:Error, s_function:String):void
                    Alert.show("Method:" + s_function + "\nName: " + error.name + "\nID: " + error.errorID + "\nMessage: " + error.message + "\nStack Trace: " + error.getStackTrace() + "\nError: " + error.toString());
               private function handleFault(event:FaultEvent):void
                    Alert.show(event.fault.faultDetail, event.fault.faultString);
          ]]>
     </mx:Script>
Now, all this is great and good, as it works with Zend Framework 1.7.6. However, when I try to upgrade to 1.7.8 (to take advantage of session management and other bug-fixes), I get the following error (using Charles):
#1 /var/web/htdocs/core/library/Zend/Amf/Server.php(390): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
#2 /var/web/htdocs/core/application/default/controllers/ServicesController.php(73): Zend_Amf_Server->handle()
#3 /var/web/htdocs/core/library/Zend/Controller/Action.php(503): ServicesController->loginAction()
#4 /var/web/htdocs/core/library/Zend/Controller/Dispatcher/Standard.php(285): Zend_Controller_Action->dispatch('loginAction')
#5 /var/web/htdocs/core/library/Zend/Controller/Front.php(934): Zend_Controller_Dispatcher_Standard->dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http))
#6 /var/web/htdocs/core/application/bootstrap.php(39): Zend_Controller_Front->dispatch()
#7 /var/web/htdocs/core/public/index.php(5): Bootstrap->runApp()
#8 {main} ?Method "sign_in" does not exist
I have no idea why this would not work anymore. My assumption is that I am not correctly setting up Zend_Amf (but then again, my counter-argument is that it worked before, so ..... ????)
Thanks for any help!
-Mike

For those that are also fighting this issue:
The problem appears to be that the RemoteObject needs to specify the class containing the methods as a source parameter. According to this bug report (http://framework.zend.com/issues/browse/ZF-5168) it is supposed to have been addressed, but apparently has re-emerged in Zend_Amf since version 1.7.7.
Using my example above, I would have to specify the RO as:
<mx:RemoteObject
          id="LoginRemote"
          destination="login"
          source="LoginAmfService"
          showBusyCursor="true"
          fault="parentDocument.handleFault(event)"
     >
           <mx:method name="sign_in" result="signin_handle(event)" />
           <mx:method name="sign_out" result="signout_handle(event)" />
     </mx:RemoteObjecct>

Create Table using DBMS_SQL package and size not exceeding 64K

I have a size contraint that my SQL size should not exceed 64K.
Now I would appriciate if some one could tell me how to create a table using
Dynamic sql along with usage of DBMS_SQL package.
Brief Scenario: Users at my site are not given permission to create table.
I need to write a procedure which the users could use to create a table .ALso my SQL size should not exceed 64K. Once this Procedure is created using DBMS_SQL package ,user should pass the table name to create a table.
Thanks/

"If a user doesn't have permission to create a table then how do you expect they will be able to do this"
Well, it depends on what you want to do. I could write a stored proc that creates a table in my schema and give some other user execute privilege on it. They would then be able to create a able in my schema without any explicitly granted create table privilege.
Similarly, assuming I have CREATE ANY TABLE granted directly to me, I could write a stroe proc that would create a table in another users schema. As long as they have quota on their default tablespace, they do not need CREATE TABLE privileges.
SQL> CREATE USER a IDENTIFIED BY a
2 DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
User created.
SQL> GRANT CREATE SESSION TO a;
Grant succeeded.
SQL> CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10));
CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10))
ERROR at line 1:
ORA-01950: no privileges on tablespace 'USERS'So, give them quota on the tablespace and try again
SQL> ALTER USER a QUOTA UNLIMITED ON users;
User altered.
SQL> CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10));
Table created.Now lets see if it really belongs to a:
SQL> connect a/a
Connected.
SQL> SELECT table_name FROM user_tables;
TABLE_NAME
T
SQL> INSERT INTO t VALUES (1, 'One');
1 row created.Yes, it definitely belongs to a. Just to show that ther is nothing up my sleeve:
SQL> create table t1 (id NUMBER, descr VARCHAR2(10));
create table t1 (id NUMBER, descr VARCHAR2(10))
ERROR at line 1:
ORA-01031: insufficient privilegesI can almost, but not quite, see a rationale for the second case if you want to enforce some sort of naming or location standards but the whole thing seems odd to me.
Users cannot create tables, so lets give them a procedure to create tables?
John

Using LOV with Validation on the Numeric Fields results in Error

Dear JHeadstart Team,
During my work with lov I encountered another problem. I defined a lov and attached the lov to a numeric field and check the LOV for validation. Now when I use LOV using the LOV button it works fine but when I enter some numbers and then press tab the LOV was not shown correctly and resulted in the following errors and the worst thing is that you can not navigate to any other pages and all try to navigate to other pages results in errors too. When we put the same LOV on a string field (which is not desirable for us) it worked fine.
It seems to me like a bug. Am I right? Is ther any solution or workaround for this problem?
Thanks in advance,
Navid
16:31:29 DEBUG (LovItemBean) -Cleared value of item HrTrainingCourseSchedulesTitle
16:31:29 DEBUG (LovItemBean) -Cleared value binding #{bindings.HrTrainingCourseSchedulesTitle.inputValue} of item HrTrainingCourseSchedulesTitle
16:31:29 ERROR (ApplyRequestValuesPhase) -java.lang.ClassCastException: java.lang.Long
javax.faces.el.EvaluationException: java.lang.ClassCastException: java.lang.Long
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130)
     at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1079)
     at oracle.adf.view.faces.component.UIXEditableValue.broadcast(UIXEditableValue.java:247)
     at oracle.adf.view.faces.component.UIXSelectInput.broadcast(UIXSelectInput.java:215)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
     at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
     at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at com.pooya.controller.jsf.PooyaAuthenticationFilter.doFilter(PooyaAuthenticationFilter.java:256)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: java.lang.Long
     at oracle.jheadstart.controller.jsf.bean.LovItemBean.validateWithLov(LovItemBean.java:101)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
     ... 31 more

Hi Navid,
We ran into the same bug and have the next workaround for it:
We extended the JHeadstart class 'LovItemBean' and we have overridden the method 'validateWithLov(...)' with:
public void validateWithLov(ValueChangeEvent valueChangeEvent)
    Object newValue = valueChangeEvent.getNewValue();
    if(newValue != null && !(newValue instanceof String))
      newValue = newValue.toString();
      ValueChangeEvent newEvent = new ValueChangeEvent(valueChangeEvent.getComponent(), valueChangeEvent.getOldValue(), newValue);
      newEvent.setPhaseId(valueChangeEvent.getPhaseId());
      super.validateWithLov(newEvent);
    else
      super.validateWithLov(valueChangeEvent);
}Next step is to use a custom template in your JHeaedstart Application Structure file for 'LOV_ITEM_BEAN'. In this custom template you should use your own class as 'managed-bean-class' instead of the default JHeadstart one.
Now you can safely generate LOV with validation of number fields.
Maybe something the JHeadstart can pcik up in the next release of JHeadstart :-)
Hope this helps.
Pascal

BEX analyzer -Maximum number of rows (65535) exceeded. Result is incomplete

Hello Experts,
I am trying to Run a report on BEx Analyzer.There are around 200,000 records to be displayed in the result.
I am getting the below error.
Maximum number of rows (65535) exceeded. Result is incomplete.
Message no. BRAIN675
We are on SAP GUI 7.X and Excel 2007
Is there any setting that I have to change inorder for BEX analyzer to display all the 200,000 records.
Also any memory setting for the result set to be changed ?
Please let me know your thoughts
Thanks
Doodle

Hi Doodle,
The rows limit for Excel 2007 is 1 million so this is not the problem with row limitation. It seems like you have opened the pre-excel 2007 workbook in excel 2007, check your title bar if it says "Compatible Mode". This will limit you to old standard of 65K.
May be what you can do is , save your file using save as option and try running the workbook.
Your new file extension will be .xlsx
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 14, 2011 10:03 AM

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

ExecuteQueryForObject returned too many results jdbc error

Hi All,
I am getting the following error on running the tomcat 6.0 and I have Oracle 11g installed.
08 Dec 2010 16:23:41 ERROR [QUARTZ_Worker-5] org.quartz.core.JobRunShell - Job DCTM.DCTMServerPipe threw an unhandled Exception:
org.springframework.jdbc.UncategorizedSQLException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at org.springframework.jdbc.support.SQLStateSQLExceptionTranslator.translate(SQLStateSQLExceptionTranslator.java:121)
     at org.springframework.jdbc.support.SQLErrorCodeSQLExceptionTranslator.translate(SQLErrorCodeSQLExceptionTranslator.java:322)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:212)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:271)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.queryForObject(SqlMapClientTemplate.java:265)
     at com.emc.documentum.bpm.daos.impl.AbstractIbatisBaseDaoImpl.queryForObject(AbstractIbatisBaseDaoImpl.java:119)
     at com.emc.documentum.bpm.bamengine.daos.impl.ServerConfigDaoImpl.getDBCurrentTime(ServerConfigDaoImpl.java:28)
     at com.emc.documentum.bpm.bamengine.services.server.factory.impl.ServersFactoryImpl.updatePipeServerTimezoneOffset(ServersFactoryImpl.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy50.updatePipeServerTimezoneOffset(Unknown Source)
     at com.emc.documentum.bpm.bamengine.services.sharedservices.impl.TaskManagerServiceImpl.executePipe(TaskManagerServiceImpl.java:341)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
     at $Proxy52.executePipe(Unknown Source)
     at com.emc.documentum.bpm.bamengine.scheduler.impl.PipeJobImpl.execute(PipeJobImpl.java:17)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:525)
Caused by: java.sql.SQLException: Error: executeQueryForObject returned too many results.
     at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeQueryForObject(MappedStatement.java:124)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:518)
     at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.queryForObject(SqlMapExecutorDelegate.java:493)
     at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.queryForObject(SqlMapSessionImpl.java:106)
     at org.springframework.orm.ibatis.SqlMapClientTemplate$1.doInSqlMapClient(SqlMapClientTemplate.java:273)
     at org.springframework.orm.ibatis.SqlMapClientTemplate.execute(SqlMapClientTemplate.java:209)
     ... 23 more
How can this be resolved? Please help !!
Thanks, T
Edited by: 805903 on Dec 9, 2010 3:00 AM

Error executeQueryForObject returned too many results
Typical Error msg:
“SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [null]; error code [0]; Error: executeQueryForObject returned too many results.; nested exception is java.sql.SQLException: Error: executeQueryForObject returned too many results”
The error is caused for using queryForObject (for a single result) instead of queryForList (when expecting multiple results).
Example of correct solution
In DAO:
public List<UpdatedContractRateDO> getUpdatedCtrctRate(Map paramMap) throws DataAccessException {
return (List<UpdatedContractRateDO>) getSqlMapClientTemplate().queryForList("charge.getUpdatedCtrctRate", paramMap);
}

Using the ContactInsertOrUpdate method from the ContactWS but error msg rcv

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community]
Corsa
Contributor
I am getting the following error I do not know why or how to work around
it.
Method 'SetFieldValue' of business component 'Contact' (integration
component 'Contact') for record with search specification '[External <br/>
      System Id] = "123456"' returned the following error:"Access <br/>
denied.(SBL-DAT-00542)"(SBL-EAI-04375)
Does any out there have any ideas?
Previously when I tried to do the same action I got the following message:
Multiple matches found for instance of integration component 'Contact'
using search specification '[External System Id] = "123456"' in the
business component 'Contact', based on user key 'Contact User
Key:3'.(SBL-EAI-04390)
Both messages are baffling me. Please, please help
Product: CRM OnDemand
06-16-2006 04:35 AM
Re: Using the ContactInsertOrUpdate method from the ContactWS but error
msg rcvd
BigSlick
Valued Contributor
Hi Corsa,
Can you access the record in the online application. Perhaps someone has
changed the access rights for this Contact on the Contact Team ?
-BigSlick
06-20-2006 12:33 PM
Re: Using the ContactInsertOrUpdate method from the ContactWS but error
msg rcvd
Corsa
Contributor
I realise now that the field AccountID is readonly and cannot be assigned.
I was attempting to assign contactsList[count].AccountId to a value . I
believe, this is the reason I was getting the access denied error.
06-23-2006 11:10 AM
==============================================================================
Click on the board or message subject at the top to return.

Ok, so I hit a bump in the road. Just when I think I understand something It doesn't work correctly.
I implemented it I thought correctly. I looked up something on the sun website (core java) I used advice from here, and my professor finaly responded to me with almost identical instructions. So I did it
my RationalNumber.java no looks like this.
public class RationalNumber implements Comparable
//.....Break to new section
public float compute ()
     float value = getNumerator() / getDenominator();
     return value;
   public int compareTo(RationalNumber op2)
     if (Math.abs(compute() - op2.compute()) < .0001)
          return 0; //Equal
      if (compute() > op2.compute())
        return + 1; //Rational Number bigger
      if (compute() < op2.compute())
           return - 1; //Rational Number Smaller
     }I thought that would work fine, but it gives me an error when I compile it:
RationalNumber.java:8: RationalNumber is not abstract and does not override abstract method compareTo(java.lang.Object) in java.lang.Comparable
public class RationalNumber implements Comparable
       ^So now what, making it abstract only creates more errors....
Also, thanks ChuckBing, I'm glad you like the screen name, I've been using it for years.

DSC: Importing Shared Variables results in error -1950679010

This post is more of an "FYI" rather than a question. I am using LV DSC 8.2.
ASIDE: I ran into this problem because I was trying to solve a related problem with Deploy Library.vi (I had dependant libraries that deployed manually, but not programmatically). Eventually, I found the answer in http://digital.ni.com/public.nsf/allkb/8EF71E1DDDC36C908625716900594B50 (not a very satisfactory answer however, IMHO).
During my solution search, another hint was provided with http://forums.ni.com/ni/board/message?board.id=170&message.id=177268&requireLogin=False which hints that using a "Network" defined SV, as opposed to a "Project" defined SV, could help. Then I discovered the difference between NetworkrojectPath and Network:URL in the SV property definition. Then I realized that NetworkrojectBinding is exposed in the Import fields (using the Multiple Variable Editor to do the importing of course), and this gave me the idea of being able to define a Network SV using the Import function.
Unfortunately, it does not work. In the csv file I set NetworkrojectBinding to FALSE, Network:UseBinding to TRUE and provide a valid Network SV path, but this results in error -1950679010: "Shared variable is bound but path or URL is not specified", which occurs when trying to save the LVLIB. It would be nice to know why this doesn't work, as I think it should. I think it is a problem with the SV import mechanism.
David Moerman
TruView Technology Integration Ltd.

Yes, you can do this programatically. I've attached a small chunk of example code (LV 8.5) that creates just 1 variable, as well as an image of it in case you are using an earlier version of LV. If you want to create multiple variables for the same library just put the "AddSharedVariableToLibrary" in a loop, of course.
David Moerman
Attachments:
Create Library and SV.PNG ‏48 KB
Create Library of SVs - BASIC.vi ‏24 KB

WSRP: Relative URL results in error code 404 in the consumer access.log

Hello everyone,
I deployed a JSF portlet(implemented in facelets) in Weblogic Server 10.3.2 (11g) [extended to support WSRP]. When the JSF portlet is consumed from a 'consumer' portal [Weblogic 10.3.2 portal], WSRP URL Rewrite results in error code 404 in the consumer portal access.log if the relative path (contextPath+resourcePath) of the javaScript resource is provided.
However, when the absolute path (protocol + serverName + port+ contextPath) of the JavaScript resource is provided, it works correctly:
works:
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Failed:
<script type="text/javascript" src="#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
Any idea on what is causing the incorrect URL Rewrite?
The .xhtml and the portlet wsdl are listed below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:nchic="http://www.saic.com/nchicago/jsf">
<ui:composition template="/WEB-INF/facelets/templates/page-protected.xhtml">
<head>
<title>not used</title>
<ui:define name="title">#{msgs.searchPageTitle}</ui:define>
<ui:define name="head">
<f:verbatim>
<style type="text/css">
#patientSearchContainer .pageCentered {
width: 800px;
#patientSearchFormInstructions {
padding: 10px 0px 10px 0px;
font-weight: bold;
font-size: 11px;
text-align: left;
.s-form-label {
width: 250px;
.s-form-input {
width: 450px;
</style>
</f:verbatim>
<script type="text/javascript" src="#{request.protocol}://#{request.serverName}:#{request.serverPort}#{request.contextPath}/resources/scripts/search/patientSearch.js"></script>
</ui:define>
</head>
<body >
<ui:define name="body" >
<h:panelGroup id="patientSearchContainer"
layout="block"
style="text-align: center;">
<rich:panel id="patientSearchPanel"
styleClass="pageCentered"
header="#{msgs.searchPanelSearchTitle}">
<h:panelGroup id="patientSearchFormInstructions" layout="block">
<h:outputText value="#{msgs.searchInstructions}" />
<ul>
<li><h:outputText value="#{msgs.searchInstructions1}" /></li>
<li><h:outputText value="#{msgs.searchInstructions2}" /></li>
<li><h:outputText value="#{msgs.searchInstructions3}" /></li>
</ul>
</h:panelGroup>
<h:panelGroup id="errorPanel"
layout="block"
rendered="#{searchForm.hasMessages}">
<h:panelGroup layout="block"
style="padding: 5px;">
<h:outputFormat value="#{msgs.errorMultipleMessage}"
rendered="#{searchForm.errorCount > 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:outputFormat value="#{msgs.errorSingleMessage}"
rendered="#{searchForm.errorCount == 1}">
<f:param value="#{searchForm.errorCount}" />
</h:outputFormat>
<h:messages layout="list"
showSummary="false"
showDetail="true"
errorClass="errors"
styleClass="errorsList" />
</h:panelGroup>
</h:panelGroup>
<h:form id="patientSearchForm" prependId="false">
<h:panelGrid columns="2"
columnClasses="s-form-label,s-form-input"
summary="#{msgs.tableSummary}">
<nchic:label for="queryIdType"
value="#{msgs.labelIdType}"
required="false" />
<h:selectOneMenu id="queryIdType"
value="#{searchForm.criteria.identificationType}"
converter="patient.IdentificationType"
tabindex="2"
styleClass="masked-hidden not-required">
<f:selectItems value="#{searchForm.lists.allIdTypes}" />
<a4j:support event="onchange"
reRender="sponsorSearch,queryIdNumber"
oncomplete="JointReg.searchForm.patientIdTypeUpdateComplete();"
onsubmit="JointReg.searchForm.patientIdTypeUpdateSubmit();"
actionListener="#{searchForm.identificationTypeChangeListener}" />
</h:selectOneMenu>
<nchic:label for="sponsorSearch"
value="#{msgs.labelIdNumberRadios}"
required="false" />
<h:selectOneMenu id="sponsorSearch"
value="#{searchForm.criteria.sponsorSearch}"
tabindex="3"
disabled="#{searchForm.identificationDisabled}"
styleClass="masked-hidden not-required">
<f:selectItem itemValue="true" itemLabel="#{msgs.labelSponsor}" />
<f:selectItem itemValue="false" itemLabel="#{msgs.labelPatient}" />
</h:selectOneMenu>
<nchic:label for="queryIdNumber"
value="#{msgs.labelIdNumber}"
required="false" />
<h:inputText id="queryIdNumber"
converter="patient.IdentificationNumber"
value="#{searchForm.criteria.identificationNumber}"
tabindex="4"
styleClass="not-required resettable"
disabled="#{searchForm.identificationDisabled}"
maxlength="11" />
<nchic:label for="queryBirthDate"
value="#{msgs.labelBirthDateShort}"
required="false" />
<nchic:date id="queryBirthDate"
value="#{searchForm.criteria.birthDate}"
monthValues="#{searchForm.lists.allMonths}"
dayValues="#{searchForm.lists.allDays}"
yearValues="#{searchForm.lists.allYears}"
tabindex="5"
styleClass="masked-hidden not-required resettable" />
<nchic:label for="queryLastName"
value="#{msgs.labelLastName}"
required="false" />
<h:inputText id="queryLastName"
value="#{searchForm.criteria.lastName}"
tabindex="8"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryFirstName"
value="#{msgs.labelFirstName}"
required="false" />
<h:inputText id="queryFirstName"
value="#{searchForm.criteria.firstName}"
tabindex="9"
maxlength="30"
styleClass="not-required resettable" />
<nchic:label for="queryGender"
value="#{msgs.labelGender}"
required="false" />
<h:selectOneMenu id="queryGender"
value="#{searchForm.criteria.gender}"
converter="patient.Gender"
tabindex="10"
styleClass="masked-hidden not-required resettable">
<f:selectItems value="#{searchForm.lists.allGenderTypes}" />
</h:selectOneMenu>
</h:panelGrid>
<h:panelGroup layout="block" style="text-align: center">
<h:panelGroup layout="block"
style="padding-top: 15px; margin-left: auto; margin-right: auto;">
<h:commandButton action="#{searchForm.searchAction}"
value="#{msgs.buttonSearch}"
styleClass="s-button"
tabindex="11"
onclick="jQuery(document.body).mask('Searching...');" />
<rich:spacer width="10" />
<h:commandButton type="button"
styleClass="s-button"
onclick="return JointReg.searchForm.resetSearchForm();"
tabindex="12"
value="#{msgs.buttonClearSearch}" />
<rich:spacer width="100" />
<h:commandButton action="#{searchForm.createJohnDoeAction}"
styleClass="s-button"
onclick="jQuery(document.body).mask('Registering...');"
tabindex="13"
value="#{msgs.buttonJohnDoe}" />
</h:panelGroup>
</h:panelGroup>
</h:form>
</rich:panel>
</h:panelGroup>
</ui:define>
</body>
</ui:composition>
</html>
WSDL:
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <s0:definitions xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="urn:oasis:names:tc:wsrp:v1:bind" xmlns:s3="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s4="urn:bea:wsrp:ext:v1:bind" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl">
<import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-2.0/markup?WSDL" namespace="urn:oasis:names:tc:wsrp:v2:wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wlp_wsrp_v1_bindings.wsdl" namespace="urn:bea:wsrp:ext:v1:bind" />
<s0:import location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup?WSDL/wsrp_v1_bindings.wsdl" namespace="urn:oasis:names:tc:wsrp:v1:bind" />
<wsp:UsingPolicy s0:Required="true" />
- <wsp:Policy s1:Id="ProducerDefaultPolicy">
- <wsp:All>
- <wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
- <wssp:SupportedTokens>
- <wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-2004-01-saml-token-profile-1.0#SAMLAssertionID">
- <wssp:Claims>
<wssp:ConfirmationMethod>sender-vouches</wssp:ConfirmationMethod>
</wssp:Claims>
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</wsp:All>
</wsp:Policy>
- <s0:service name="WSRPService">
- <s0:port binding="s2:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/markup" />
</s0:port>
- <s0:port binding="s2:WSRP_v1_ServiceDescription_Binding_SOAP" name="WSRPServiceDescriptionService">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-1.0/serviceDescription" />
</s0:port>
- <s0:port binding="s4:WLP_WSRP_v1_Markup_Ext_Binding_SOAP" name="WLP_WSRP_Ext_Service">
<s3:address location="http://10.75.2.235:7711/RegistrationPortlet/producer/wsrp-wlp-ext-1.0/markup" />
</s0:port>
</s0:service>
</s0:definitions>

did you publish the internetserive "<b>bbpstart</b>" to site internal?
Regards
Raja

Configuration validation resulted in error(s)

Hi,
I am facing a problem in configurator,we are using deferred booking workflow.When we are creating new orders with ATO/PTO items the standard BOOK Node in the workflow is getting completed with result Incomplete.
The error message on sales order, which we can see from View all open messages, is saying as"Configurator validation resulted in error(s)".
When we copy the above sales order which is failing with above error and create a new order, the new order is getting booked successfully.We are not changing anything in the copied order.
Also the deferred workflow is not giving any issues when creating a sales order using the Standard item.The OM debug is also not suggesting anything related to this.
Please let me know if anyone have come across this issue.
Thanks!

Thanks Sandeep for ur reply on this..
I followed the process u mentioned but it didnt work.Actually as I mentioned in my first question, this issue is coming up only when we are creating new sales order.If we copy the sales order which is not getting booked then the new one(copied) sales order's gets booked correctly.Though the copied sales order also have same configuration.
I also tried to validate the Configuration for the sales order having issue using the api CZ_CONFIG_API_PUB.verify_configuration and this resulting as SUCCESS.
Is there any thing in the deferred booking process which may cause this issue?
Also the error message Configuration Validation resulted in errors is coming through a exception, and the exception is being used in CZ_BATCH_VALIDATE.The batch validate is being called from Send_Input_xml procedure.It seems if we copy the order this procedure for batch validate is not being called.
but i m not getting any clue in Send_Input_xml procedure abt why exception is being raised.
Thanks!

'Check covered levels OKS' process results in error during QA checkup

Hi,
The following process in QA test, before submiting a service contract results in error.
'Check covered levels OKS' with the error message
"Atleast one covered line is required".
I'm not able to choose any product.
How to set the covered level as product in service contracts?
In the service contracts authoring window, under lines tab -->pricing/products-->
effectivity
line number
level- covered product. But the lov in name field doesn't list any value ?
what could be the possible reason for this?
Regards,
Nithya

Well, I think I can only give some limited info about these questions since I am only a contracts user, not a developer or administrator.
But here's a few things that might help.
1 & 2) I have always created contracts from scratch where I work. They can't seem to get OM to create contracts correctly (so I can't help with question 2). I don't use OM except for inqueries.
When you create such a contract, it should show up in the Install Base (IB) if you look up the IB record with the related Reference Number (which changed to Product Number in the IB when my company switched from 11.5.5 to 11.5.8). In my case it was the Contracts tab in 11.5.5 (Java interface) and the Contracts link in 11.5.8 (HTML interface).
3) From my experience, the Contract Number is the Sales Order Number in View Transactions if you had the AR Interface checked in the contract.
If you want to change from not having the AR Interface checked to having it checked, I think this works fine and the contract will bill the next time the Main Billing program is run after you make the change, as long as the Bill On Date (11.5.5) or Invoice Date (11.5.8) is set to the current date or earlier. An Invoice (INV line item with invoice # -99) will show up in the Billing History after the AR to Contracts Interface program is run. The actual invoice # will show up in this Billing History after the Invoicing programs are run.
In 11.5.5, if our contract started in the future, we not only had to make sure the Bill On Date was current or earlier, but also run the Main Billing program on that contract with a date equal to or later than the end date of the contract we wanted to bill before it would work. Do not do this on all your contracts at once if you have recurring billing on any of them. You must run it on the individual contracts, otherwise the recurring contracts will bill in full. This is supposedly fixed in 11.5.8, since you can use offsets of more than 31 days on the invoice date, but we haven't billed any yet, so I can't say for sure.
I had problems with billing when trying to change the ammounts in the line items after the billing program had already invoiced a contract in 11.5.5 and haven't tried this in 11.5.8 (it billed incorrect ammounts on the successive invoices).
Note that we have a highly customized version of Oracle Applications 11i, so your results may differ somewhat.

Distribution Cycle KSV5 Resulting in error when deselected the test run chk

Hi Experts,
Please help me out
iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
First Message:
Balance per segment 9999 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 9999 is not zero.
The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
2nd Message
Balance per segment 1000 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 1000 is not zero.
The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
3rd Message
No update performed due to an error
Message no. GA719
Diagnosis
A serious error occurred during processing.
System Response
Processing is continued as far as possible, but results are not posted.
Procedure
This error is shown in the error list before this error message. Here you can find more information about this particular error.
I would appreciate an early reply........!!!
Thanks & Regards,
Neela

Hi,
Check notes 764652 and 897086; it might be helpful.
Regards,
Eli

Solman_admin password changes results in errors during managed system setup

Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS     701     0003
SAP_ABA     701     0003
ST-PI     2008_1_700     0000
PI_BASIS     701     0003
SAP_BW     701     0003
CRMUIF     500     0001
SAP_AP     700     0014
BBPCRM     500     0013
CPRXRPM     400     0014
BI_CONT     704     0002
ST     400     0019
ST-A/PI     01L_CRM570     0000
ST-ICO     150_700     0016
ST-SER     701_2008_2     0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
Sander

Just for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there.

Export from OWB Release: 9.2.0.2.8 results in error: MDL1255: Error export

An export of a whole project from the OWB-client results in error en crash of the OWB Client.
Does anyone know what causes this?
Below the contents of the log-file generated by the export-utility
Export started at 11/14/2005 4:53:17 PM
* Export from OWB Release: 9.2.0.2.8 Version: 9.2.0.2.0
* User: owbrep_MDN_dev Connect String: (DESCRIPTION=(ADDRESS=(HOST=l2-bm13-e0g.nl.rsg)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=owbrep.l2_bm13_e0g.nl.rsg)))
* Definition File: null
* Data File: C:\data\owb\o\MIS_MDN-20051114_1651.mdl
* Log File: C:\data\owb\o\Log.log Log Message Level: ALL
* Physical Names: Y Field Separator: | Character Set: WE8MSWIN1252
* Project: MIS_MDN Configuration Data: Y
MDL1256: Error occurred exporting LOCATION with physical name <DB>, business name <DB>.
Detailed Error Message:
MDL1255: Error exporting CONNECTOR for LOCATION <DB/DB>.
Error in SQL Statement. Please contact Oracle Support with the stack trace and details on how to reproduce it.
*************************************************************

This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

Compiling a method exceeding 64K results in error

Similar Messages

Maybe you are looking for