Compiling Clients on HP Server

I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask thenext two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam

Just an FYI for everyone.
Thanks Brad.
Frank
---------------------- Forwarded by on 10/03/97 08:53 AM
[email protected] on 10/02/97 02:21:21 PM
To: [email protected]
cc: (bcc: Frank Lam/Consultant/NAC)
Subject: Re: Compiling Clients on HP Server (2)
Frank,
Alas, even if not a single line of code touches the display project,
you
must compile and link with the X Windows header files and libs on a UNIX
machine, because the ErrMgr wants a console window to log errors to.
At 10:27 AM 10/2/97 -0400, you wrote:
>
>
>
>
>
I do not have DisplayProject in my supplier's plans.
Previous Message:--------------------------------------------
I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask
the
next two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam
Fax Cover Page:
Brad Mayer
Customer Service and Support
Forte Software
[email protected]
Direct: (510) 869-3466
Fax: (510) 869-2010
Fax Cover Page:

Similar Messages

Compiling Clients on HP Server (2)

I do not have DisplayProject in my supplier's plans.
Previous Message:--------------------------------------------
I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask thenext two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam
Fax Cover Page:

Just an FYI for everyone.
Thanks Brad.
Frank
---------------------- Forwarded by on 10/03/97 08:53 AM
[email protected] on 10/02/97 02:21:21 PM
To: [email protected]
cc: (bcc: Frank Lam/Consultant/NAC)
Subject: Re: Compiling Clients on HP Server (2)
Frank,
Alas, even if not a single line of code touches the display project,
you
must compile and link with the X Windows header files and libs on a UNIX
machine, because the ErrMgr wants a console window to log errors to.
At 10:27 AM 10/2/97 -0400, you wrote:
>
>
>
>
>
I do not have DisplayProject in my supplier's plans.
Previous Message:--------------------------------------------
I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask
the
next two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam
Fax Cover Page:
Brad Mayer
Customer Service and Support
Forte Software
[email protected]
Direct: (510) 869-3466
Fax: (510) 869-2010
Fax Cover Page:

RE: Compiling Clients on HP Server

Hello,
You have to verify, if you drag display projet in a server partition.
You can have this problem whith suppliers projects.
When a project A who is a supplier for a project B (A -> B), is in your
partition server, you retrieve A and B in your partition. And also, all
the supplier of B ... perhaps some display projects ...
Example :
A -> B (B Display)
A -> C (C in server Partition)
D -> B
in partition where you put C, you Have A, C and B, D
You can see the contain of your server partition whith the ShowApp
command.
De : Frank Lam[SMTP:[email protected]]
Date : jeudi 2 octobre 1997 14:25
A : [email protected]
Objet : Compiling Clients on HP Server
I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask the
next two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam

Just an FYI for everyone.
Thanks Brad.
Frank
---------------------- Forwarded by on 10/03/97 08:53 AM
[email protected] on 10/02/97 02:21:21 PM
To: [email protected]
cc: (bcc: Frank Lam/Consultant/NAC)
Subject: Re: Compiling Clients on HP Server (2)
Frank,
Alas, even if not a single line of code touches the display project,
you
must compile and link with the X Windows header files and libs on a UNIX
machine, because the ErrMgr wants a console window to log errors to.
At 10:27 AM 10/2/97 -0400, you wrote:
>
>
>
>
>
I do not have DisplayProject in my supplier's plans.
Previous Message:--------------------------------------------
I am trying to compile a GUI-less application on the server and have
received the following error many times.
cpp: "ds.h", line 11: error 4036: Can't open include file 'Xm/Xm.h'.
I did a find on unix and came back with nothing, which explain the error.
From what I can tell Xm.h is a Motif header file, which leads me to ask
the
next two question...
1. Since my application has no window classes (btw: client and service
partition are all on the server),
why does would Forte need to access Motify?
2. Is Xm.h a file that comes with Forte, part of the X/Motif package,
Freeware/Shareware, or HP?
We are running Forte 3.0.E.0 on a HP K420 (9000/800) on HPUX B.10.20
Thanks in advance.
Frank Lam
Fax Cover Page:
Brad Mayer
Customer Service and Support
Forte Software
[email protected]
Direct: (510) 869-3466
Fax: (510) 869-2010
Fax Cover Page:

Error while compile client! Please help

Hi everybody,
I am new to J2EE. I hav got application server and client in the same computer.
While compile client application to test the server part followint error is shown:
28-Feb-2007 10:36:05 com.sun.corba.ee.spi.logging.LogWrapperBase doLog
INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/3122"
Caught an exception:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: Exception thrown from bean; nested exception is: com.sun.jdo.api.persistence.support.JDOFatalInternalException: JDO76519: Failed to identify vendor type for the data store.
NestedException: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : oracle.jdbc.pool.OracleDataSource
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:161)
at javax.rmi.CORBA.Util.mapSystemException(Util.java:67)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:142)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(Unknown Source)
at bank._CustomerFacadeRemote_DynamicStub.createAccount(_CustomerFacadeRemote_DynamicStub.java)
at bankaccountclient.Main.insertInfo(Main.java:55)
at bankaccountclient.Main.<init>(Main.java:38)
at bankaccountclient.Main.main(Main.java:78)
Caused by: java.rmi.RemoteException: Exception thrown from bean; nested exception is: com.sun.jdo.api.persistence.support.JDOFatalInternalException: JDO76519: Failed to identify vendor type for the data store.
NestedException: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : oracle.jdbc.pool.OracleDataSource
at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.java:199)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:853)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:160)
at $Proxy22.createAccount(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:123)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:648)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:192)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1709)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1569)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:951)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:721)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:469)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1258)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:409)
BUILD SUCCESSFUL (total time: 4 seconds)
Please let me know the solution of the error!
And also if client and application server is in same mechine which interface must be used to talk client with session bean?
Please help me!

1) It looks like you have an error in JDBC configuration.
The main string is "Class name is wrong or classpath is not set for : oracle.jdbc.pool.OracleDataSource
Check out JDBC connection pools and resources.
2) If your beans and client there are at the same JVM you can use local interface, else use remote interface.

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Copy file from client PC to server in a web deployed application

I have developed one application using Oracle forms 6i, which is deployed on the web server.
I run this application from a client PC in Internet Explorer using internet.
I want to copy one file from the client PC to the web server.
I have done following things
- Created a shared folder on the server and given full rights to every one on this folder
- I use 'net use' command in my program to connect to this shared folder
- I use copy command to copy file from local client pc to server. This copy command I am executing using host command of my programming (PL/SQL: eg. host('copy abc.txt \\server\share\') )
But this does not work.
When I do the same thing in command window, it works.
(ie. Start-Run cmd to open command window and then type the above copy command)
Can you please tell me, how to copy a file from client PC to the sever in Web deployed application?
Thanks

I downloaded D2KWUtil from the link suggested by you. It has very nice example demo form. But the documentation provided says following
Using D2KWUTIL in Web Deployed Applications
The use of this library is not supported with Web deployed applications.
In a web deployment scenario not all functions within D2KWUTIL will work. Any function that interacts with the User Interface (such as those in the WIN_API_DIALOG package) will fail.
Any interaction with the O/S by other functions will all be executed on the NT server and will act within, or return information pertinant to, the environment on that machine. For instance GET_COMPUTER_NAME will return the Server’s name, not the name of the computer that the Client browser is running on. Likewise COPY_FILE will copy files in the Forms Server not on the Client.
Functions such as those in WIN_API_BITOP will continue to work without change.
so this will not work in web deployed application.
Any other suggestion?
Thanks

How can i load file into database from client-side to server-side

i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {

Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null

Is it possible to lock the keyboard of a client from a server using java

please explain wheterit is possible to lock the keyboard of a client from a server using java

You want to process code on one machine, and thereby lock the keyboard on another machine? No, that's not possible. It is extremely far from possible.
Of course, if the client is running software with security holes in it you might hack into it and crash the thing. This will lock up the keyboard pretty good. I hope that's not what you want ...
Or are you talking about a setup where you already have code running on the client, and some sort of communication between client and server? In that case what you need to know is whether it is possible to lock the keyboard at all. Once you have figured that out, it is trivial to add the communication code to have the server software tell the client software to lock the keyboard.
So what do you mean with "lock the keyboard"? It's pretty easy to remove/disable all keyboard related listeners in your own application. It's a lot harder (and AFAIK impossible with pure java) to disable alt-tabbing out of the application. And impossible, except from exploiting security holes, to lock the ctrl-alt-delete-combination on windows machine.

ORA-03113 while connect from 8i client to 7 Server

Hi,
I have a Oracle 7.3.3 Server running on a SCO OpenSever 5.0.5 and a Oracle 8i Client 8.1.6.0.0 on a RedHat Linux 6.2.
When I try to connect from the client to the server by issue command "sqlplus user@test", it responses me "Error while trying to retrieve text for error ORA-03113". But when I run "netasst" to test the connection, it says the connection was sucessful.
Can anyone help? Here are my configuration files:
Listener.ora on Server side:
LISTENER=
(ADDRESS LIST=
(ADDRESS =
(COMMUNITY=TCP.world)
(PROTOCOL=TCP)
(Host=10.128.64.52)
(Port=1526)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST=
(SID_DESC =
(SID_NAME = test)
(ORACLE_HOME = /usr/app/oracle/product/7.3.3
(PRESPAWN_MAX=10)
tnsnames.ora on client side:
TEST.888.COM
(DESCRIPTION =
(ADDRESS_LISTS =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 10.128.64.52)
(PORT = 1526)
(CONNECT_DATA =
(SID = test)
)

Hi,
I don't have a 64 bit instance, but maybe another test will be usefull, try to get a connection with sqlplus on the server but via sqlnet like "user/passwd@tnsentry" I think if that also is not possible it is not the 64 bit issue but more that the listener itself coundn't etsablish a db connection, be aware tnsping is only testing if the listener is running and do not check if the listener is able to connect to the db.
Hope this helps a little to find your real proble ;-), Olaf

Problem with program hanging randomly on certain commands from win 7 pro client to SB Server

Having a problem with program hanging randomly on certain commands from Win-7 Pro Client to SB Server Both 64-Bit
Five other slower XP-Pro 32 Bit systems though they are older and slower systems do not seem to hang as readily if at all.
It has been very frustrating as the Client-System, SB-Server and Program should work w/o any hitches, but this seems to work fine @ times and then hang randomly.
Would appreciate any and all suggestions in assisting.... JimBAgde-MSS

You can try this, as I have had similar problems with another MS Access .MDB file and slow access before. This fixed my problem for me. On the slow computer, make sure the program is set to see the .mdb file via UNC path, not a mapped drive letter. ex.
USE: \\yourserver\shared\dental\file.mdb
DO NOT: S:\\shared\dental\file.mdb
hope this helps

What's the difference between client combo and server combo? Also, what would happen if I install both?

what's the difference between client combo and server combo? Also, what would happen if I install both?

One is for the base version of the Mac OS, the other is for the Server version. You can only install the one that matches your system.

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed?

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed? We have around 300 clients that need to be enroled on the Mac server. I want to know what is the recommended amount of clients a Mac server should contain. Also what are some recommended specs to make sure the server will flawlessly?

Hello cpreasbeck,
Thank you for contacting Apple Support Communities.
I was able to find the following transition guide for Xserve that provides some workload guidance to determine performance when planning a server deployment.
Transition Guide Xserve
http://images.apple.com/xserve/pdf/L422277A_Xserve_Guide.pdf
On page 9, Performance there is a chart that provides maximum numbers of connected users for various activities such as file sharing, mail, web, calendar, directory services and Time Machine and the CPU used as a server (Xserve, Mac Pro, Mac Mini). This information is a bit dated as the referenced software is Snow Leopard Server (OS X 10.6), and the hardware is older also, but it should give you a general idea of what you might need to look for.
Regards,
Jeff D.

How to know oracle client or oracle server installed in m/c ?

Hi all,
Could any one tell me how to know whether oracle 10.1 s/w installed in my machine is client version or server . Is there any easy method..??
Thanks in advance.

Hi,
Check the database / dbs folder exist in the $ORACLE_HOME if yes then SERVER else CLIENT.
PS: Above is not a standard method, i am telling based on DIRECTORY.
Regards,
Taj

Can i run UDP client and UDP server socket program in the same pc ?

hi all.
when i execute my UDP client socket program and UDP server socket program in the same pc ,
It's will shown the error msg :
"Address already in use: Cannot bind"
but if i run UDP client socket program in the remote pc and UDP server socket program run in local pc , it's will success.
anybody know what's going on ?
any help will be appreciated !

bobby92 wrote:
i have use a specified port for UDP server side , and for client define the server port "DatagramSocket clientSocket= new DatagramSocket(Server_PORT);"Why? The port you provide here is not the target port. It's the local port you listen on. That's only necessary when you want other hosts to connect to you (i.e. when you're acting as a server).
The server should be using that constructor, the client should not be specifying a port.
so when i start the udp server code to listen in local pc , then when i start UDP client code in local pc ,i will get the error "Address already in use: Cannot bind"Because your client tries to bind to the same port that the server already bound to.

Socket Communication between java client and c++ server

HI,
In my project,I want to do the following:
1.Sending datas from client to server.
2.Getting the response from server to client.
I written the client in java.but the server is in c++.
Is it possible to communicate with the server using java codings itself?
Im able to send the data from my java client to the server.
but unable to get back the datas from server to client.
Can anyone tell me how to do this?
thanks a lot

hi
thanks for ur reply.
I didnt get any error msg while getting the back the datas.
Actually i divided my application into two parts.
My application will act as both server and client.
server ll get the browser request and send to the client and the client will send that data to the c++ server.
Im able to do that.and unable to get the data from server.
Didnt get any error.
can u tell me how to make an application to act as both client and server.
I think im wrong in that part.
thanks a lot

Compiling Clients on HP Server

Similar Messages

Maybe you are looking for