Complete all recommended updates beforere starting your browser and internet websites not loading pages
Complete all recommended updates before restarting your browser /web page will not loading. please help me
Man, that gave me high hopes. Sadly, reverting to the last firmware version didn't resolve it, which I guess isn't too much of a surprise as I had been using those sites for quite some time after the latest update.
for what it's worth, if anyone is having the same experience and wants to try that solution, I found some instructions on how to revert to a previous firmware version:
http://discussions.apple.com/thread.jspa?messageID=9580534�
Similar Messages
-
I'm strictly a user; not an IT guy. I can follow directions but need as much specific help as possible - i'm always afraid when i try corrective actions, i'll "break" something else. Need help quick for daughter & me (job hunt).
Other sites besides one listed gave same problem. But (in this case) ACT.org worked fine...Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
>In Firefox 4 Safe mode also disables plugins (Tools > Add-ons > Plugins) and hardware acceleration (Tools > Options > Advanced > General) -
I have an iphone 6 plus and have completed all the updates. I have Uconnect on my vehicle and use have to have MAP in order for it to work. I have read you do not have to turn on MAP it automatically turns on with bluetooth. But it still does not work. Thank you in advance for any suggestions!!
Hi janis77,
Thanks for the question. After reviewing your post, it sounds like you are having trouble connecting to your car. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi,
My Exchange 2013 Hybrid environment is at CU5 level. Multiple administrators have started experiencing the error message
"error
Sorry, your request couldn't be completed. Try deleting the cookies from your browser, and then sign in again. If the problem continues, contact your helpdesk."
It only started two weeks ago and did not coincide with any infrastructure changes. The message occurs when clicking anything on the EAC GUI and it eventually allows you to perform the operation but only after the message
pops up a few times.
I have tried clearing the browser cookies, history, etc. Note that using the Office 365 EAC does not yield the same messages and it only happens in IE (IE 11).
Thanks.Hi,
From your description, please make sure that the "Require SSL" is checked in IIS Manager -> Sites -> Exchange Back End -> ECP -> SSL Settings.
What's more, ensure that EAC site is added to the “Compatibility Mode”.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Firefox requests to update Flash but the download fails over and over initialization at 50%.
also in one trial of download i recieved the message: "JavaScript is currently disabled in your browser and is required to download Flash Player". But i checked and it is enabled.
I am stuck with Flash In FF and moving to Chrome.Your system details list doesn't show that the Shockwave Flash plugin is installed and enabled.
*https://support.mozilla.org/kb/Troubleshooting+plugins
Latest Flash player versions here:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
You can verify on the Adobe Flash Players Test Page that the Flash plugin is working and which version you have.
* http://www.adobe.com/software/flash/about/
If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!
There are several other similar posts in this forum with the answers. Your post appears third in my Google search today looking for a solution so I thought I'd add the solution here as well.
It is obviously a bug in either (or both) Firefox and the NYT.
The quickest solution is to simply go to the VIEW Menu in Firefox, then the ZOOM option and choose RESET.
I use Mac and this happens in Firefox 3.6.10. It does not happen in other browsers like Safari, Chrome and Camino, and it did not occur before last week.
It has also occurred in the iOS version of Safari on iPad. Not sure how to fix it there. -
My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?
Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine! -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
My iMac all of the sudden started going in and out of the dashboard, then started changing all files on the desktop to 2's. It also did this when having another window open. Do I have a virus?
There are no viruses that can affect Apple OS X.
What files do you keep on the Desktop? How many?
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks' for Leopard.
Here is Apple's take on the subject:
http://www.apple.com/pro/tips/immaculate_desktop.html -
I had beeen using Puffin browser for running flash player on my iPad2. Now the Puffin browser is not getting connected and I get a message saying that " A Firewall is installed between your device and internet". Can somebody suggest how to resolve this???
Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG -
My program updated with 11.05.05 and it is not available on your site is this correct?
My program updated with 11.05.05 and it is not available on your site is this correct?
What do you mean "not available on their website"?
Of course it is: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5674 -
hi all how do you reset your security questions. i can not remember the answers. how do you reset them? i cant buy anything because it keeps coming up
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.
Hey NJ85,
Thanks for the question. If you are having issues connecting to the iTunes Store, this article may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks,
Matt M. -
I updated iPhoto 9.1.3, and I can not 'to open iPhoto
I updated iPhoto 9.1.3, and I can not 'to open iPhoto (I said that I need to update the library) ... ... hours ... minutes pass and nothing happens.
Given that I'll '20gb photo and a short video, so I do not have a big library..., remained all night to update the database, but still nothing ... someone I can' help ..?Well that's an easy fix:
Restart your mac and try launch iPhoto again.
If that fails:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a file called ‘iPhoto’Lock.data or similar. Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help? -
my ipad 2 did its own update as usual ( 7.0 to 7.1) except this time it will not load anything to do with game center even its own app............is there anything I can do?
Try closing all of the apps on your iPad and then reset the device.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close every app this way.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
My iMac is back after hard drive replacement! Now how do I use time machine to set it back up?
Ok .. Please can someone give me step by step info on how to bring my mac back to life. It has a new hard drive, I have a time machine back up. I have just turned it on and I am at a loss as to what to do.... Do I need discs, do I need to turn time m
-
I have Adobe Photoshop Elements 10 and I can open up a new file
I open it up and then the pop up comes you know asking you what size paper and the resolution and stuff and than you press okay. But when i press okay it does nothing, What do I do???
-
In htmldatatable only one row is getting added... why??
Hello everyone, I'm designing a htmldatatable. In that I'm putting 3 columns and 3 rows. But only first row is getting added not the other 2. Why is this happening?? Here is my code.... private HtmlDataTable table = (HtmlDataTable)app.createComponent
-
Hi All, I have a bpel process with read adapter which reads the .txt input file,then transform activity and the output is given to the write adapter. I deployed the process on to the server and dropped a txt file in the input directory. The process r
-
How do I add video files to my itunes library?
Ok, this is basic but how do I add videos to my library? The files is supported by itunes but whenever i try to add to my library it's not there! Help. Thanx