Component usage determination in UI configuration

Hello everyone,
Could you please help me know how the framework gets this component usage as below ?
Thanks.
Devashish

Hi Devashish,
If I got you right, you want to understand how system picks up the Component usage. If yes, then the explanation is below.
We have a concept of component interface and component usage. Component interface is just like a window to enter in to house or in other words it is the exposed interface which can be used by other components to access the component views.
Component usage is the place where we define that what all components (component interface) we are going to use.
Now coming back to your question, whenever we navigate to views of other components, system knows the component usage name in which we defined earlier that we are going to use this particular view.
While opening the view we can have different configurations based on the component usage.
Let’s say, it’s like if component usage is "A" display “field1” and “field 2” or else if component usage is "B" display “field 2” and “field 3”.
I hope it will give you a clear insight to the concept. If you still have any issues, please let us know, we will try to help you.
Regards jotsaroop singh

Similar Messages

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Referencing component usage with different interfaces

Hi experts,
First of, some details;
- I'm on NW04.
- I have a generic WDP interface named: IModelComponent
- I have a specific WDP interface named: IEmployee
- I have a WDP component implementing both interfaces named: Employee
Now I want to create some sort of component factory component. In this component I have:
- defined 'Used Web Dynpro Component' IModelComponent
- Created a method getComponentUsage (static names just for clearer example):
wdThis.wdGetIModelComponentComponentUsage().createComponent("x.x.x.org.mdc.empl.EmployeeModelComponent", "x.x/x~org~mdc~employee");
return wdThis.wdGetIModelComponentComponentUsage();
Next I have a client view component which refers to the component factory and the employee interface
- defined 'Used Web Dynpro Component' IEmployee
- defined 'Used Web Dynpro Component' ComponentFactory
- On request I call the factory method getComponentUsage
Now, when I use this component usage the following way:
wdThis.wdGetIEmployeeComponentUsage.enterReferencingModeUnsafe(receivedComponentUsage);
Then things work perfectly! This is basically what I want to achieve.
But the method enterReferencingModeUnsafe is deprecated, so I wonder if there are other, better ways to achieve usage referencing of components with multiple interfaces (create as one interface, use as the other interface).
Looking forward to any comment.
Grtz,
Chris
Edited by: Chris van de Wouw on Feb 6, 2010 5:20 PM

Basically solved it myself. I'm now using the actual required component usage (IEmployee) as entry point for the factory, which will create the correct implementation component (based on configuration). For IModelComponent specific methods I can use the getInterfaceController() of the employee component usage class and cast it to the model component interface.

GURUS reg.error NO MATERIALS COMPONENT WAS DETERMINED

.I am having an issue of how to create a super BOM and super routing for a configurable materials when all the options I have are non-stokable. So i went ahead and created the component in BOM with class item category and gave the class name.
Routing I did the usual way and SO was created,MRP run is done and now when I see the components tab in the planned order,I get this error "NO MATERIALS COMPONENT WAS DETERMINED" looks like the BOM did not explode...please let me know how to fix this?
Thanks in advance

Hello
Could you please check the OSS note "SAP Note 1872228 - No Cost Component Split in Plan Price Calculation". I have also faced the same issues and it get solved by implementing this oss note.
Before implementing this oss note, check whether KP26, KP06, Cost component structure are OK. Then execute the process KSS4 for Plan cost split and then KSPI.
Then check the report S_ALR_87013644, whether the cost component split is working or not. If not then implement the oss note 1872228.
Thanks
Manish

Bind Component Usage

Hi Experts,
Root Componet :ICCMP_BT_COM
Child Componet : ICCMP_BTITEM
Child of (ICCMP_BTITEM) componet : ICCMP_BT_PCONFG
My Requirement is when i click the "ICCMP_BTITEM" view list value then it has to call "ICCMP_BT_PCONFG". Actually "ICCMP_BTITEM" is connectdd to ICCMP_BT_COM using COmp Usage.
My Requirement is to add Product Config field in Item List. i have done this chage. After when i click the field value then it has to call another Componet.
My Issue is item list already a separate componet and here i need to call another component (Product Config Component) using component usage. Now i have created binding for the "Product Config" component in item list "WD_USAGE_Init" method..
BUt in run time only root Controller Method is triggering. Kindly Suggest where to bind these components.
Kidly Suggest how to do this..
Thank you
Cha

Hi Senthil,
Thank you for your information on both place.
"You can set and get the collection while you navigate via button clicks / navigations.
Did you identify the BOL relation between the context nodes of ICCMP_BTITEM & Child componet ICCMP_BT_PCONFG.
You can defenitely pass these collection via your O/P & get the same in the calling components I/P."
I am new to this, can you please send the code for this.
Actual Reuirment
To mimic the standard order item "Product configuration" field functionallity into credit memo item.
Component Details
Standard order Component : ICCMP_BT_SLO/Slo1cart (when cliick "Product configuration" field value then has to call the product config view )
Compliant Componet : ICCMP_BT_COM (Here item list view is (Item) which component usage view)
Work DOne upto now
I have added field in "ICCMP_BTITEM" and wrote the code in get , get_p & get_m methods . Now able to see the field & get the value in UI.
As welll added Pconfig window in "ICCMP_BTITEM" component usage & created event handle method as well created. in run time event handle method is triggered. But not aware how to call the pconfig window and binding.
Can please explain where else need to make changes & have to add code. Can you please share the code.
Thank you,
Cha

Production order component batch determination : Over delivery allowed in b

Iu2019m using production order component batch determination in CO02. System is not allowed to allocate an excess component split batch quantity. System is always allowed to allocate exact requirement quantity where to make open quantity is 0.
It generates the following massage once click enter after selecting an excess component quantity. My requirement is to add the excess quantity in component batch determination.
Massage details:
Quantity of batch 0052902459 is reduced to 9.300 KG as split qty > req. qty
Message no. LB034
Diagnosis
The split quantity of the chosen batch has lead to the split quantity total exceeding the required quantity.
System Response
The quantity is rounded down by the system.
Procedure
An overdelivery is not allowed by the current business transaction.
Procedure for System Administration
If necessary, check the batch search strategy to see whether an overdelivery is allowed.
I have maintained the configuration in transaction COB1 as follows to enable over delivery batch determination.
Strategy type: CO01- OrdType/Plnt/Matl
Key combination: Order type
Over delivery allowed in batch determination: Tick on
Please let me know the configuration to enable to do component batch determination with minus open quantity (Excess component quantity)

Hi,
As I understand it seems that you do not have batch split allowed in the auto batch determination for component materials. And you need to have batch split on a need to basis?
If thats true, then on the line item in the component overview. Select the item details for the Batch that has been determined (general view, there is a field for split in terms of %, change that from 100% to a the lower value you want to pick from that batch). It should then allow you to add more batches.
let me know if my assumption and answer helps.

SPRO Define My Messages Widgets Define Widget Component Usage / Custom MyIncidents*

Hello everybody,
I am trying to add a custom component usage into
Tx: SPRO > Define My Messages Widgets > Define Widget > Component Usage
like this
Is there an howto somewhere available for this that I can use it in the configuration of the start page widgets "my own messages / incidents":
Kind regards
Update:
In the meanwhile I found that BSP component AIC_HOME is including componentusages named like the standard component usages given in the customizing table under "Define Widget". So I guess I have to enhance the component by my own componentusage with a similar functionality.
I don't know if anyone will ever respond of any of my posts one day but here is
Update 2:
I am stuck now at that Component Usage. When I try to delegate OP SINGLESELECTION to DYN_NAV and visa versa it does not show me an entry to select from.
Update 3:
Well, I first had to add the view within Runtime-Rep. editor > ViewSets > Ov.Page <add< like the standard view of the "MyMessage..."-kind. Now I have all possible selections. Was this the final solution? .... tbc ...
Update 4:
At least in the UI configuration tool i can save now permanently based on one component usage:
BUT the filter which should come along with the component usage does not work.
Last update due to success and problem solution:
Finally there is a need for enhancing the AIC_HOME Component-Controller @
WD_USAGE_INITIALIZE
Just modify the code like this:
CASE iv_usage->usage_name.
 WHEN 'ZMyMessageWidgetITTicket'.
 cl_ai_crm_mymsg=>set_active_switches( iv_usage ).
 cl_ai_crm_mymsg=>set_defaults( iv_usage ). " Reported By My Organization
 WHEN 'MyMessagesReportedByMyOrg'.
 cl_ai_crm_mymsg=>set_active_switches( iv_usage ).
 cl_ai_crm_mymsg=>set_defaults( iv_usage ). " Reported By My Organization
Now your custom component and all stuff around that should work with all the filters and extra drop down buttons, etc..
Nice to see that I started with a big question mark around the component usage (unfortunately described as "Define Widget") and on my way to the finishing line I found out that I had to make myself a hole new assignment block.
Hint:
If you stumble over this error:
Exception-Klasse
CX_BSP_WD_INCORRECT_IMPLEMENT
Fehlername
Programm
CL_BSP_WD_OVW_VIEWSET=========CP
Include
CL_BSP_WD_OVW_VIEWSET=========CM00A
ABAP-Klasse
CL_BSP_WD_OVW_VIEWSET
Methode
BIND_LAZY
Zeile
27
Then you have forgotten to edit BSPWDV_EHSET_ASG via sm30. There you connect your enhancement-set (which you use to enhance AIC_HOME) to the client.

Solved by myself..
Used the set_changed_by_client method of the IF_WD_CONTROLLER.

ABAP webDynpro MS Office component usage throws - Access via 'NULL' object

I am trying to include MS office word in my custom ABAP webDynro application based on the sample SAP Package SIOS for all the MS office component usage. 
In WDMODIFY method , when the courser is reaching the point to call office component it throws a Null pointer exception. Not sure , if i am missing some thing here or skip a step. Please advice. 
get the IOS interface 
wd_this->factory ?= office->_method_handler. 
Below is the code for WDMODIFY 
method WDDOMODIFYVIEW . 
DATA: 
 office TYPE REF TO cl_wd_view_element, 
 office_res TYPE REF TO cl_wd_view_element, 
 mime_repository TYPE REF TO if_mr_api, 
 content TYPE xstring, 
 url TYPE string VALUE 
'/SAP/BC/WebDynpro/SAP/PUblic/BC/ssr/uuielibs/office_integration' & 
'/iostest_fields.doc'. 
DATA refexp TYPE REF TO cx_ios_exception.
DATA: msgid TYPE syst-msgid,
 msgnr TYPE syst-msgno,
 msgty TYPE syst-msgty.
get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
 l_message_manager TYPE REF TO if_wd_message_manager.
DATA envproxy TYPE REF TO if_ios_environment.
just do it once
CHECK first_time = abap_true.
mime_repository = cl_mime_repository_api=>get_api( ).
CALL METHOD mime_repository->get
 EXPORTING
 i_url = url
 IMPORTING
 e_content = content.
wd_context->set_attribute( name = 'DATAS' value = content ).
get the office control
office ?= view->get_element( 'GENERIC_OFFICE' ).
ASSERT ID sios_demo CONDITION office IS BOUND.
not possible : Missing bugfix component bc-wd-aba
office_res ?= view->get_element( 'RESULT_DOCUMENT' ).
ASSERT ID sios_demo CONDITION office IS BOUND.
get the IOS interface
wd_this->factory ?= office->_method_handler.
ASSERT ID sios_demo CONDITION wd_this->factory IS BOUND.
wd_this->factory_res ?= office_res->_method_handler.
ASSERT ID sios_demo CONDITION wd_this->factory_res IS BOUND.
TRY.
 wd_this->factory->get_wordprocessing_proxy(
 IMPORTING proxy = wd_this->document ).
 ASSERT ID sios_demo CONDITION wd_this->document IS BOUND.
 wd_this->factory_res->get_wordprocessing_proxy(
 IMPORTING proxy = wd_this->document_res ).
 ASSERT ID sios_demo CONDITION wd_this->document IS BOUND.
*calling setfields
 DATA co_error_info_getfields TYPE REF TO if_wd_context_element.
 DATA co_error_info_getfields_stru TYPE wdr_ext_attribute_pointer.
 co_error_info_getfields = wd_context->get_lead_selection( ).
 co_error_info_getfields_stru-attribute_name =
'error_info_getfields'.
 co_error_info_getfields_stru-element = co_error_info_getfields.
 DATA fields TYPE if_ios_wordprocessing=>fields_type.
 DATA fieldstable TYPE if_ios_wordprocessing=>fields_type_table.
 DATA co_fieldcontent TYPE REF TO if_wd_context_element.
 DATA co_fieldcontent_stru TYPE wdr_ext_attribute_pointer.
 DATA inputfield1 TYPE xstring.
 DATA tabulator TYPE xstring.
 DATA endofline TYPE xstring.
 DATA: conv TYPE REF TO cl_abap_conv_out_ce.
 DATA: testfielddata TYPE string.
 testfielddata = 'SAPTEST'.
 conv = cl_abap_conv_out_ce=>create( encoding = '4110'
ignore_cerr = abap_true ).
 CALL METHOD conv->convert( EXPORTING data = 'field1'
 IMPORTING buffer =
fields-fieldidentifier ).
 CALL METHOD conv->convert( EXPORTING data = testfielddata
 IMPORTING buffer = fields-value
 CALL METHOD conv->convert( EXPORTING data =
cl_abap_char_utilities=>horizontal_tab
 IMPORTING buffer = tabulator ).
 CALL METHOD conv->convert( EXPORTING data =
cl_abap_char_utilities=>cr_lf
 IMPORTING buffer = endofline ).
 wd_context->set_attribute( name = 'inputfield1'
 value = testfielddata ).
 APPEND fields TO fieldstable.
 wd_context->set_attribute( name = 'fieldcontent' value =
fieldstable ).
 co_fieldcontent = wd_context->get_lead_selection( ).
 co_fieldcontent_stru-attribute_name = 'fieldcontent'.
 co_fieldcontent_stru-element = co_fieldcontent.
document is set through datasource!
 wd_this->document->setfields( EXPORTING fieldsptr =
co_fieldcontent_stru
 tabulator = tabulator
 endofline = endofline
 errorinformation =
co_error_info_getfields_stru ).
*calling opening result document
 DATA co_error_getcontent TYPE REF TO if_wd_context_element.
 DATA co_error_getcontent_stru TYPE wdr_ext_attribute_pointer.
 co_error_getcontent = wd_context->get_lead_selection( ).
 co_error_getcontent_stru-attribute_name = 'error_getcontent'.
 co_error_getcontent_stru-element = co_error_getcontent.
 DATA co_createdcontent TYPE REF TO if_wd_context_element.
 DATA co_createdcontent_stru TYPE wdr_ext_attribute_pointer.
 co_createdcontent = wd_context->get_lead_selection( ).
 co_createdcontent_stru-attribute_name = 'createdcontent'.
 co_createdcontent_stru-element = co_createdcontent.
waiting of ACF Patch!
 wd_this->document->getcontent( errorinformation =
*co_error_getcontent_stru
 contentpointer_result = co_createdcontent_stru ).
*calling reopening template
 DATA error_opendocument TYPE REF TO if_wd_context_element.
 DATA error_opendocument_stru TYPE wdr_ext_attribute_pointer.
 error_opendocument = wd_context->get_lead_selection( ).
 error_opendocument_stru-attribute_name = 'error_opendocument'.
 error_opendocument_stru-element = error_opendocument.
 wd_this->document_res->if_ios_document~opendocument( EXPORTING errorinformation = error_opendocument_stru ).
 CATCH cx_ios_document INTO refexp.
 CATCH cx_ios_communicationwrapper INTO refexp.
 CATCH cx_ios_factory INTO refexp.
 CATCH cx_ios_environment INTO refexp.
 CATCH cx_ios_exception INTO refexp.
ENDTRY.
IF refexp IS NOT INITIAL.
 refexp->get_message( IMPORTING
 mtype = msgty
 number = msgnr
 mid = msgid ).
 l_current_controller ?= wd_this->wd_get_api( ).
 CALL METHOD l_current_controller->get_message_manager
 RECEIVING
 message_manager = l_message_manager.
report message
 CALL METHOD l_message_manager->report_t100_message
 EXPORTING
 msgid = msgid
 msgno = msgnr
 msgty = msgty.
ENDIF.
endmethod.
Edited by: suryajoshi on Jan 13, 2011 5:04 PM

Thanks for your reply.
I have defined DATAS attribute as XSTRING. You are right i am using SIOS code from WDMODIFY.
I am getting exception at this line: Please advice. Its seems that factory is not been recognize. I double check , factory is present in attributes Tabs of the View.
get the IOS interface
wd_this->factory ?= office->_method_handler.
ASSERT ID sios_demo CONDITION wd_this->factory IS BOUND.

No component usage created in enhanced web dynpro component

Hi experts,
I am facing the following problem:
I'd like to enhance a web dynpro component in order to add a popup window. The popup is triggered by the process_event method. So far everything works just fine.
But the popup needs to know some context attributes from the main component, and I cannot create a component usage in order to set the context mapping.
Does anybody know how to solve this issue?
Thanks and regards
Jan Phillip Höft

Hi!
Thanks for your answers first of all.
I need the popup to be a stand alone web dynpro component, so I guess the assistant class doesn't do the trick because I can not access it in the popup component.
The popup is called when the business object is saved. So that the user is asked to notify other users that the document has changed. In this popup the user should fill in the message and click a button to send it and close the popup.
So I tried the OBN approach as well but with two problems :
1. I cannot close the popup component by coding (button click) because it has no direct parent component
2. The save event is not run through properly so the document stays locked by the user. But I didn't look into this yet.
So it would be perfect to have an embedded popup component which is based on a stand alone web dynpro application so it can be closed properly but it need at least access to the guid of the main component.
Anybody got an idea for this?
Thanks and regards
Jan Phillip Höft

Dynamic create Component usage and embed it in view container

There is a view_container_uielement VC_TEST in view V_MAIN, in wd component ZTEST.
I created a web dynpro component named ZWDR_TEST and add it into the wd component ZTEST.
    gr_comp_test = component->create_cmp_usage_group(
      name = 'TEST_GROUP'
      used_component = 'ZWDR_TEST' ).
    lr_comp_usage = me->gr_comp_test->add_component_usage(
      embedding_position = 'V_MAIN/VC_TEST'
      name = 'TEST'
      used_component = 'ZWDR_TEST' ).
    if lr_comp_usage->has_active_component( ) is initial.
      lr_comp_usage->create_component( component_name = 'ZWDR_TEST' ).
    endif.
    ifc_test ?= lr_comp_usage->get_interface_controller( ).
I thought the wdr ZWDR_TEST was embeded in the view V_MAIN in the position VC_TEST by the embedding_position parameter.
But in the result web page, there is no ZWDR_TEST in the position of VC_TEST.
Could any one explain why?
Thanks

Hi,
for dynamic comp usage.. check this..
http://help.sap.com/saphelp_nw70/helpdata/en/bc/191a427ff6db2ce10000000a1550b0/frameset.htm
Dynamic Component Usage
embed view
Dynamic View embed
How to create a webdynpro view dynamically and embed into view container?
Cheers,
Kris.

Component Usage error in MSS Leave Request approval

Hi All,
We are getting the below mentioned error only for few users while approving the leave request in MSS.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:861)
    ... 41 more
Kindly share your views on the same.
Thanks and Regards,
Vivek.

Hi Anup,
Please find the complete Trace below.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; MS-RTC LM 8)
Version     null
DOM version     null
Client Type     msie6
Client Type Profile     ie6
ActiveX     enabled
Cookies     enabled
Frames     enabled
Java Applets     enabled
JavaScript     enabled
Tables     enabled
VB Script     enabled
Server
Web Dynpro Runtime     Vendor: SAP, build ID: 7.0013.20080611120129.0000 (release=NW04S_13_REL, buildtime=2008-09-11:17:05:50[UTC], changelist=42127, host=pwdfm114), build date: Wed Nov 19 19:21:28 CET 2008
J2EE Engine     7.00 patchlevel 109044.44
Java VM     IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system     AIX, version: 5.3, architecture: ppc64
Session & Other
Session Locale     en
Time of Failure     Sat Jan 02 12:26:56 CET 2010 (Java Time: 1262431616916)
Web Dynpro Code Generation Infos
sap.com/ess~lea
SapDictionaryGenerationCore     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:43[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore     7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:25[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary     7.0011.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:00:20[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro     7.0011.20061227101814.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:05:13[UTC], changelist=431317, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
SapWebDynproGenerationCore     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:35[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
sap.com/pcui_gp~xssutils
SapDictionaryGenerationCore     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:43[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore     7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:25[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary     7.0011.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:00:20[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro     7.0011.20061227101814.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:05:13[UTC], changelist=431317, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
SapWebDynproGenerationCore     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:35[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
sap.com/tcwddispwda
No information available     null
sap.com/pcui_gp~xssfpm
SapDictionaryGenerationCore     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:43[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore     7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:25[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary     7.0011.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:00:20[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro     7.0011.20061227101814.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:05:13[UTC], changelist=431317, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
SapWebDynproGenerationCore     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:35[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
sap.com/tcwdcorecomp
No information available     null
sap.com/pcui_gp~tecl
SapDictionaryGenerationCore     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:43[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0011.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:02:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore     7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:25[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore     7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary     7.0011.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:00:20[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro     7.0011.20061227101814.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:05:13[UTC], changelist=431317, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
SapWebDynproGenerationCore     7.0011.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:08:35[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0011.20070125102926.0000 (release=645_VAL_REL, buildtime=2007-01-31:20:21:35[UTC], changelist=434634, host=pwdfm101)
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
       at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
       at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
       at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
       at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
       at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:861)
       at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:258)
       at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:103)
       at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
       at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
       at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
       at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
       at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:841)
       at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1071)
       at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
       at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
       at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
       at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
       at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
       at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
       at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
       at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
       at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
       at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
       at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
       at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
       at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
       at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
       at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
       at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
       at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
       at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
       at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
       at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
       at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
       at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
       at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
       at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
       at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
       at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
       at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
       at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
       at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
       at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
       at java.security.AccessController.doPrivileged(AccessController.java:219)
       at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
       at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks and Regards,
Vivek.

How to close a pop up window of used component ( usage defined )

Hi Friends ,
I'm calling a window as a pop up of used component ( Usage defined ). I want to close that pop up using a button on the embedded view of that window.
it would be great help If any one can help me in this.
Regards,
Laeeq

>
Laeeq Siddique wrote:
> Hi Silke ,
>
> I Want to close a pop up using a botton on embedded view of window of used component and I do not have the refrence of window object there. I know what you are talking about but its not that simple.
>
> Regards,
> Laeeq
Actually it is pretty simple. From the embedded view you can use the APIs to get access to the hosting window object.
data l_api_v_new_attachment type ref to if_wd_view_controller.
l_api_v_new_attachment = wd_this->wd_get_api( ).
data window_controller type ref to if_wd_window_controller.
window_controller = l_api_v_new_attachment->get_embedding_window_ctlr( ).
data window type ref to if_wd_window.
window = window_controller->get_window( ).
window->close( ).

How to get active component of other components component usage

Hi all,
let me try to describe you the issue.
I've got three components interacting with another. Lets call them CA, C1 and C2.
CA uses both C1 and C2, so CA has component usages CUA1 and CUA2. But C1 also uses C2 with component usage CU12.
C1 calls an interface method of component usage CU12 (of component C2).
But although I've got an active component on CA-level for CUA1 (lets call this active component ACT1), C1 does not call the interface method of ACT1. (Even events are not triggered.)
How can I assign the active component of CUA1 to C1 at runtime and how do I call its interface method from C1?
Can I search for active components within C1 by name (I've got several active components, how do I differentiate them)?
Thank you for your help.
ismail
FYI: The scenario:
CA uses C1 as a global search component.
CA has several list components C2.1, C2.2 etc.
C2.1 lists all arrival/departure flights from NY. It also offers a minor search functionality for flight regarding NY.
C2.2 lists all arrival/departure flights from LA. It also offers a minor search functionality for flight regarding LA. etc...
I want to use C1 as a global search which uses the minor searches of C2.1, C2.2 etc. The outcome of the minor searches shall be displayed in C1, but also in C2.1, C2.2 etc. when I switch to the C2.1, C2.2 etc.
Example usage 1:
1. At CA I go to C2.1 and search for all flights to NY from London.
2. Then I switch to C2.2 and search for all flights from LA to Berlin.
3. When I switch back to C2.1 the former results remain there, I can still see all flights to NY from London.
Example usage 2:
1. At CA I go to C1 and make a global search for all departures to London.
2. If I now switch to C2.2 I want to see all flights from LA to London, without a search here.
3. If I now switch to C2.1 I want to see all flights from NY to London, without a search here.

You use a desktop pane, but save a reference as a JLayeredPane. So make the reference of type JDesktopPane and check out [the documentation API|http://java.sun.com/javase/6/docs/api/javax/swing/JDesktopPane.html#getSelectedFrame()].
For the next time, bookmark [http://java.sun.com/javase/6/docs/api/] and use you browsers search function to quickly jump to the class you want. Swing component usually also have a link to the relevant tutorial.

Component usage in web dynpro abap

Hi everyone,
I am basically SAP ABAP consultant and I am very new to SAP EP, can anybody please help me out what is Component usage in web dynpro abap?If anyone please can refer the process how to create Component usage it will be clearer to understand.
Thanks,
Sonali.

Hi,
Please go through below pdf document which will help in understanding the componenet usage in webdynpro ABAP.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2e71ce83-0b01-0010-11a4-98c28a33195f
Hope it will help you.
Raghu

External component usage with interface node

Hi everyone,
I have component A , which has an interface node with Input element checked:
Nodes
Node Name     IF_HROBJID
Interface Node     1
Input Element (Ext.)     1
Dictionary structure     ZHR_HROBJID_LIST
Cardinality     0..n
I have another component: Component B Where I want to bind a table to this interface node.
In component B :
1. I definied the Componenet Usage of component B in the componenet controller.
2. I drag & drop the IF_HROBJID node to the component controller's context (the node is mapped)
But when I try to bind a table, I always get the " The Mapping to Node COMPONENTCONTROLLER.1.IF_HROBJID Has Not Been Completed. " error.
nd_if_hrobjid = wd_context->path_get_node( path = 'IF_HROBJID' ).
nd_if_hrobjid->bind_table( lt_if_hrobjid ).
Can someone tell me what is the problem, and how can I solve it?
Thanks
N.

Hi,
Here you are trying to use component A in component B right?
Then what you need to do is:
1. Declare the component usage of A say A_USAGE in properties tab of component B.
2. Create a node say 'DATA' in component controller of component B. The node 'DATA' would have the same structure as the node in your component A.
3. Fill the node 'DATA' in component controller's method.
4. Under your webdynpro component B, you will see Component Usages -> A_USAGE. open interface controller inside that.
    Goto context tab and drag the 'DATA' node from component controller of B on to the node in interface controller.
Hope this is clear!
Best Regards,
Srilatha

Component usage determination in UI configuration

Similar Messages

Maybe you are looking for