Compound time signatures and the metronome in GB 09
Hi,
Two questions.
1) Is there any way to set up a project in GB09 with a 6/8 time signature, where the metronome beat is a dotted quarter note (dotted crochet) equal to say 48 bpm?
2) Can a backing track (not midi) loaded as a Real Instrument be somehow "synched" with the GB metronome?
Thanks
1) The metronome will always count the units of the time signature, in this case six eigth notes. If you want a different metronome, create your own click track using a drum set!
2) Sure. There's several methods to do that, and everybody has his own. I understand that you want to set the project's tempo to that of the imported audio. The easiest way is to count the beats per minute (or in 30 seconds and multiply by two) and then fine tune the song's tempo until it syncs perfectly. (It might never sync perfectly since GB only supports integer number bpms.)
Similar Messages
-
Logic doesn't let you set a bpm based on a compound time signature
So for 12/8 it gives the tempo for the 8s not for the dotted 4s
In order to get Logic to deal with this, I had to manually increase the tempo from say 90 for 4/4 to 135 for 12/8
Am I missing something?
Thank you
DavidHi
Yep... Logic's tempo display in the Transport etc. is always based on 1/4 notes (crochets), regardless of time signature.
You can get the "correct" tempo to display in the Score by using "dotted crochet=" or "quaver=" symbols, which may help with the necessary tempo calculations.
HTH
CCT -
How do I insert a section with another time signature than the one im inser
How do I insert a section with another time signature than the one im inser
Yeah I've been trying to figure this out as well, for example... my song might be 90 bpm and I want to program another track using midi but have it play at 180 bpm. The only way I've found to work around this is to write my 180 bpm part make a sample of this and then loop this into the 90 bpm song.
-
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first. -
I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?
There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both
-
Wheb I try to update iTune I am getting a message "the site has not a valid signature" and the downloading is stopped. How can I fix IT?
I am using windows 7 64That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.
The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html -
I am trying to download the new version of itunes and it is stating that it has an invalid signature and the downloan has been removed. How can I download it or get the signature?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
My iPhone will not restore the process starts and then a message pops up saying 'we are unable to continue with your activation at the time' I have tried a few times now and the same. What can I do ? As I can't use iPhone at all now!!
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
May half and half, 1.5 tb for time machine and 1.5 tb for data.
I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
Any recommendation?As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. -
How to display the color of time period and the legend in Calendar view?
Hi,
Sorry to disturb you guys with a quite simple question.
I want to do a calendar view to display the period of absence for the portal user. I've setup the iView but it displays neither the color of time period nor the legend.
The problem is:
1) If I test with <i>static legend</i> (that is, I input the time period directly in the form instead of using data service),
a) I could only define <b>one</b> time period, because it's impossible to map the <i>out</i> port of calendar to <i>in</i> port of form on defining the event as 'goto'.
b) I can't see the color displayd while deploying although there is just one time period! Neither the legend. I' ve given the label and color of the legend and assigned the action as default in design board. Why it doesn't work?
2) If I test with <i>dynamic legend</i> following the chapter "<i>Display Date on a Calendar</i>" in the <i>Modeler's Guide</i> of VC;
I assigned @RECORDNR to 'ID legend field', and used BAPI_ABSENCE_GETLIST as dynamic legend data service to edit the legend, and assigned the color for every ID. But neither color nor legend could kindly appear. What's the problem? Is there any error in the edit of entry list of the legend?
Please help me! Thanks!!!Is there any advice?
I'll greatly appreciate your help! -
I just purchased 2 WD TB external hard drives. I have one formatted to be used with the time machine and it is working well. the other that i am using to store large files is excluded from the time machine. I can't click on it and add as per instructions. It won't allow me to. I need to back t his up as well. Ive backed up this one so I am able to reformat it but it doesn't recognize the drive unless it is formatted in FAT which is what WD advices it be formatted in. It should be in Mac extended journaling but I can't get it to mount in that. Help?
In addition, TM will not backup drives partitioned in FAT as the OP stated his 2nd EHD is formatted. My recommendation to the OP is to reformat the 2nd EHD to Mac OS Extended (Journaled) and then include it in his TM backups. Of course in order to do this the OP must first move the data on the FAT partitioned drive to his internal HD and then once the EHD is re-partitioned correctly he can move it back.
In addition as Pondini mentioned the 2nd EHD must be directly connected to the iMac rather than be a network drive, TM is NOT, repeat NOT a network backup solution with the single caveat of using a Time Capsule backup. -
FYI: Time Machine and the New MobileMe Calendar
Following a recent query from someone who had inadvertently deleted his calendars, a bit of experimenting has shown that it is possible to restore them from Time Machine. The method is described here:
http://homepage.mac.com/rfwilmut/notes/timemachine.htmlAnthony Curcio wrote:
I am selling my iMac and have purchased a new Macbook Air. Since it does not have firewire or a DVD drive, does anyone know if I can ask Time Machine to restore the latest iMac backup directly to the MBA as a way of transferring my files to the new computer? Thanks.
Where are your backups? If they're on a USB drive, or a Time Capsule, you should be able to use +Setup Assistant+ on first boot. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum). -
I keep getting the message "error signature" and the itunes needs to close
i keep getting the message "error signature" and iTunes needs to close. please help.
Hi johnbpl,
It sounds as if you are having difficulty connecting to the App Store to check for updates for applications on your iPad. If that is the case, I would suggest that you troubleshoot using the steps in this article -
Can't connect to the iTunes Store - Apple Support
Start with the section Troubleshoot issues on an iPhone, iPad, or iPod touch then if needed the section Learn more.
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
How do i prevent my open web pages from being deleted when the system is being restarted
windows 7 how
-
How to track Snapshot refresh error
Hi I have a procedure which is doing the below transaction one after one: 1- Refresh snapshot Snap1 2- track snapshot refresh status If Ok do step 3 if not exit 2- Insert agregate data from snapshot Snap1 to table 3- Track insertion status if Ok proc
-
Where can I download Acrobat X from
I Have key fro this version but cannot find where to download it from
-
Error in Buying center,opportunity management
Hi Guys, I created an opportunity and when I click on Graphical view in the contacts assignment block and select Add contact option, I get the following error . Pls help me to resolve this error. Regards Jaya
-
When I try to sing into my FaceTime it says "The server has encountered an error processing registration. Please try again later."Ho What do I do??