Computer crash - attempting retrieval from ipod... please help!!

had the blue screen of death last week.. boohoo, i know. have had to install a new harddrive, so all my itunes is toast. trying to get everything back by downloading it off the ipod but i just cannot figure out how. how do i get it to see that ipod's libarary as somethign accessible and then copy it over? HELP ... please!?
Lou

See if this can help;
http://discussions.apple.com/message.jspa?messageID=797432#797432
Cheers!
-Bryan

Similar Messages

  • Computer crash - transfer music from iPod to new computer?

    My computer crashed and now my music is only on my iPod. How can I transfer it back into iTunes?
    iPod Shuffle    

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is also manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 and Windows Vista so it requires a little adaptation as the iPod preferences are no longer in the location mention for instance but if you're interested it's posted in this thread: Two-way Street: Moving Music Off the iPod
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, have a look at the web pages and documentation, they are generally quite straightforward but check for ones that work are advertised to work specifically with the shuffle. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    YamiPod Mac and Windows Versions
    iGadget Windows Only
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    TuneJack Windows Only
    iPod2PC Windows Only
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. Relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days you can get loads of storage for a reasonable outlay.

  • Cant connect to iTunes store from iPod please help new user

    Getting cant connect error tried online support didn't work please help never used this before

    I had this problem just the other day it took me a few day to figure it out but what I did is go to setttings and click store then sign in . It then told me that I have to review payment option. Theer should be a option none in payment options but if there is not put in a credit card then conferm it then when your done you can take off your credit card option

  • Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

    Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

  • I am trying to watch amazon prime through apple tv from my computer.....  please help!

    i am trying to watch amazon prime through apple tv from my computer.....  please help!

    Give us some hints, please. What have you already tried and what happened?

  • TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    If iTunes sees the iPod, try a manual install, as pointed out on link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • You have 2 ipods, please help

    you have 2 ipods, please help
    Hi, I have just bought another ipod, I have now a 60GB video ipod and a new 8GB ipod. Does it pose any problem when synchronising ? Can they have different names ? Thks

    You can name your iPod whatever you like. If you are connecting a second iPod for your own use, just connect it to your computer and it will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update the whole library, selected playlists or you can manage it manually.
    When using a small capacity iPod like the Nano with a large library, you can choose the update option "automatically update selected playlists only" (called Sync Music - All songs and Playlists in iTunes 7). This would allow you to create a playlist specifically for your Nano and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod Nano (around 3700MB for a 4GB or 1800MB for a 2GB). You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes

  • I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes &amp; related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

    Tried all 6steps to Error Message: An error has occurred when attempting to change modules-Please help thx

    Hi, I¹ve been through it again to ensure I¹ve not forgot things. Completely
    removed Lightroom and all files I can find, etc and reloaded. Some tedious
    result. Step 6 is too time consuming at the moment for me, too many things
    on the go since I¹m about to go on holiday and on return I shall need
    Lightroom on this iMac. Any clues? This iMac had Mavericks from new,
    uploaded to Yosemite and then loaded Photoshop CC, Lightroom etc and get
    this damned problem.
    Reading around the web I¹m not the only one with this issue, to suggest a
    new user a/c is a soft option without resolving the issue.
    I hope an expert from Adobe can resolve this,
    Regards, George (retired IT Manager and IT Systems Project Manager)

  • After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

    After upgraded to Mavericks my macBook Pro my Apple TV sound crash each ten seconds. Please help me!

    Hi Aparana.rahul,
    The beeps during the startup of your MacBook Pro indicate that it may need to be serviced. See this article for further information -
    OS X Mavericks: If you hear beeps when your computer starts up
    http://support.apple.com/kb/PH14206
    Note that while the article title says it is for computers running Mac OS X 10.9 Mavericks, the same information applies to other versions.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How do I convert a standard user to an administrator if i have no other admins on the computer, re-bootimg NOT an option,  please help!!!!!!

    how do I convert a standard user to an administrator if i have no other admins on the computer, re-bootimg NOT an option,  please help!!!!!! 

    Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no adminstrator account exists on the system.
    If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always a possibility.
    Step 1
    Start up in Recovery mode. The OS X Utilities screen will appear.
    Step 2
    Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the  Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
    Step 3
    Select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
    Select the user account
    and select
    System Administrator (root)
    Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
    Select
     ▹ Restart
    from the menu bar.
    Step 4
    This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
     ▹ Log Out...
    from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
    Step 5
    At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
    Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
    Allow user to administer this computer
    You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
    Step 6 (optional, but recommended)
    Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
    Credit for this idea to ASC member wessongroup.

  • HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

  • I accidentally removed iphoto from dock, please help?

    I accidentally removed iphoto from dock, please help?
    iPhoto isn't in my applications to I can't drag it to dock.  All images and movies are still on Mac (heart did stop as I thought I'd lost everything and nearly cried) but I don't know how to get iPhoto back.  I'm worried about trying different things as don't want to lose anything on Mac.  Noticed that I haven't been using Time Machine and bought a couple of years ago so not sure what operating with.  I have our 2 CDs from when we bought the Mac - 13-inch Macbook Pro (Mac OS X Install DVD) and 13 inch MacBook Pro (Applications Install DVD).  My photos are not backed up so not sure if I need to do this first - can I back up to iCLoud or do I need newer software?
    Any help would be greatly appreciated - need lots of step by step instructions though!

    All images and movies are still on Mac
    Of course they are.  Deleting an app doesn't delete the files that's in it.

  • HT4623 After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from.  Please help

    After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from.  Please help

    I'm assuming you mean you don't have your camera application (which is not saved on any backup anyway).
    One way to find it is to get to your home screen, swipe the screen from right to left, and type "Camera" in the search field.  Camera is a core Apple app and cannot be deleted, so it must be there somewhere.
    An alternate approach is to do Settings > General > Reset > Reset Home Screen Layout

  • I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

    I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

    So what is your iPad doing, specifically?  Are you having a problem when you try to sync it or back it up on iTunes?  I think we need more information here before we can help...
    Thanks,
    L.

Maybe you are looking for

  • How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

    How can I generate SSL Keys for use on Oracle 9iAS server version 1.0.2.2.0. I have tried using the open_ssl method but was unsuccessful.

  • Using EJB with Hibernate on Weblogic Server ADF platform

    Hi all, We use Jdeveloper 11.1.1.4 and WLS 10.3 I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating u

  • Calling pl/sql procedure from a java class.

    I have an onSubmit event that needs to call a pl/sql procedure using the named connection. Can anyone tell me how this is code in a Model 1 ADF JSP page?

  • MP3 CDs won't work in car stereo

    Hello. I've tried multiple burning tests with iTunes, Toast, and the Finder. I'm trying to get an MP3 CD to work in my 2007 Mazda 6 (five CD changer). The manual says it will read MP3 CDs, and I am burning MP3s... not AACs. When the CD is loaded into

  • Maps Updater - IMEI # cannot be obtained

    E71-2(236.03) 200.21.118 27-11-2008 RM-357  After downloading and installing the Nokia Maps Updater (and removing Beta versions of 3.0) I have an error; Cannot update licenses Missing phone info: IMSI or IMEI cannot be obtained I found this forum pos