Computer domain re-join

Hi
If we manually change the domain membership of a server from DomainA to DomainB, but then need to return it to DomainA (e.g. something doesn't work while on DomainB) can this be done cleanly ? Or is it effectively creating a new computer account back
in DomainA ? With new GUID/SID etc ?
Would a full backup of the server (including system state) make any difference ? I don't think it would as it is the reference in A.D. which has been changed.
Does the computer account go disabled or get deleted when removed from DomainA ? Or does this depend on what account is used to perform the task ?
Thanks

If we manually change the domain membership of a server from DomainA to DomainB, but then need
to return it to DomainA (e.g. something doesn't work while on DomainB) can this be done cleanly ?
On Windows and AD level, there is no problem doing it. However, you need to check that your running applications support that.
By the way, I do not agree that this is the approach you need to take when having problems with a domain.
To ensure the HA of your AD, you need at least two DC/GC servers per domain. By taking backups and preparing a DRP plan, you should be able to recover in case of disaster too.
Or is it effectively creating a new computer account back in DomainA ? With new GUID/SID
etc ?
If there is existing account in Domain A then a new computer account will be created.
Does the computer account go disabled or get deleted when removed from DomainA ? Or does
this depend on what account is used to perform the task ?
It should be deleted.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

SP 2013 - Error: This operation can be performed only on a computer that is joined to a server farm

Hello Community!
I am working with SharePoint 2013 and I built a farm inside the firewall. Then a decision was made to move the two WFE's to the DMZ. Since that time, whenever I try to access the site collections, I get the error below.  Other information: All
the web applications are on port 80, but I'm not having any problem with accessing Central Administration which is on port 8080; the network team did screw up the DNS originally, but I'm told it's correct now; the two WFE's servers show in my Manage servers
on the Farm interface 2X, once with the server name, once with the fully Qualified Domain Name, the ones with the FQDN shows a Services Running status of Not Configured.
Has anyone else ever seen this error and if so please provide guidance and instruction for fixing the error.
Thanks!
Tom
Server Error in '/' Application.
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server
to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code.
Exception Details: System.InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server
to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified
using the exception stack trace below.
Stack Trace:
[InvalidOperationException: This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration
database. To connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   Microsoft.SharePoint.Utilities.SPUtility.AlternateServerUrlFromHttpRequestUrl(Uri url) +262
   Microsoft.SharePoint.Administration.SPAlternateUrl.GetContextUri(HttpContext ctx) +385
   Microsoft.SharePoint.SPAppRequestContext.InitCurrent(HttpContext context) +1013
   Microsoft.SharePoint.SPAppRequestContext.get_Current() +175
   Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken,
SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) +400
   Microsoft.SharePoint.SPRequestManager.GetContextRequest(SPRequestAuthenticationMode authenticationMode) +120
   Microsoft.SharePoint.Administration.SPFarm.get_RequestAny() +370
   Microsoft.SharePoint.SPLanguageSettings.GetGlobalInstalledLanguages(Int32 compatibilityLevel) +39
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.RefreshInstalledLocales() +103
   Microsoft.SharePoint.Administration.SPTemplateFileSystemWatcher.Initialize() +130
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.System.Web.IHttpModule.Init(HttpApplication app) +873
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +582
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +322
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +384
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +397
[HttpException (0x80004005): This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To
connect this server to the server farm, use the SharePoint Products Configuration Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +646
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +771
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18010
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
According to your description, my understanding is that you got an error when you moved your SharePoint.
This error occurs when the SharePoint farm administrator cannot connect to your configuration database. Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server. Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server. More information about creating rules in firewall, please refer to the following posts:
http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server
http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

An attempt to resolve the DNS name of a domain controller in the domain being joined has failed.

"An attempt to resolve the DNS name of a domain controller in the domain being joined has failed."
This is the error message I get whenever I try to connect to my servers domain which I just set up earlier today. I have read through a bunch of other threads on the same error message
but each of them has had different solutions and none of them have helped me.
The one thing that I suspect is related to my problem is that I can't ping my domain on the W7 computer I'm trying to connect. I can ping the server, but not the domain. the domain
i'm using is set up like "domain.local" .
Other things that might be relevant.
I'v already set up user accounts and a computer under the Server 2012 active domain administrator settings.
I'v port forwarded ports 80 and 443 on the server.
The server has a static IPv4 IP adress. I haven't done anything with IPv6
The W7 computer has a dynamic IP adress, but I don't think it changes. I believe my router is set up to keep it constant, not 100% sure though.
Thanks for any help with this, I'm pretty much out of ideas on this.

Hi ZachPrinz,
Firstly, would you please let us know the outputs of ipconfig /all both of the clients and the DC.
Also, if you run nslookup FQDN of your DC from your clients, what will you receive?
Meanwhile, regarding the issue, we can refer to
the similar thread and see how it works.
More information:
Troubleshooting Domain Join Error Messages (en-US)
Hope this helps.
Jeremy Wu
TechNet Community Support

Create a SharePoint 2013 Appplication in C#,Error:This operation can be performed only on a computer that is joined to a server farm

I want to create a sharepoint application in C#:
SPFarm CurrentFarm = SPFarm.Local;
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
webAppBlder.UseNTLMExclusively = true;
webAppBlder.AllowAnonymousAccess = false;
webAppBlder.UseSecureSocketsLayer = false;
SPWebApplication webApp = webAppBlder.Create();
webApp.Provision();
It's create a new application succeed,but when I view the site there is an error:
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products.
How can I fix this issue?
ps:I had create some new application in sharepoint web site.It's all fine without any issue.
The sharepoint server,sqlserver and the programs in the same machine.
Besr regards

Hi,
I think below line is causing the error -
SPWebApplicationBuilder webAppBlder = new SPWebApplicationBuilder(CurrentFarm);
can you put that line within a try catch and see that causes an exception. If so, you might try as below-
SPSecurity.RunWithElevatedPrivileges(delegate()
webAppBuilder = new SPWebApplicationBuilder(CurrentFarm);
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Our service upgraded to 4g but now my Mac computer will not join the network, It sees the network but will not join

Our service just upgraded to 4g. Now my Mac computer will not join the network. It "sees" the network but will not "join"

Hi Hojo38,
That's not good! What happens when you attempt to make the connection? Do you receive an error message? What device is the computer making a connection to? Send details please.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Windows 7 Computer refuses to join 2003 Domain.

Hey guys, I'm having a slight problem over here on my end connecting two new windows 7 pro PC's to the 2003 R2 server downstairs.
What's happening is that the domain name 'Name.root' is not found by either computer, but if I type in 'Name' I get a prompt to join the domain with a valid username and password associated. I've tried every username I have and even created
one on the server for myself to test with, but it still gives me an error that the password/username is incorrect.
As far as I know, the server and clients are all using DHCP and the DNS suffix is pointing to the same name. I can even ping the server from the computers upstairs, but if I use NSLookup, it only shows the router that's being used.
There are other windows XP pro units that will all connect using the same exact settings, so at this time I'm completely stumped as to what my next steps are. Any help with this would be greatly appreciated.

Hi,
To find out what's your network environment, please upload the ipconfig /all results from Windows 7 client and Windows server 2003 R2.
I recommend you to manually assign IP address and DNS for Windows clients and Windows server 2003 R2 instead of using DHCP.
Also, please check if SRV record is created in DNS manager.
You can refer to the article below:
http://support.microsoft.com/kb/816587
And recommend add such an entry: <FQND of domain> <server ip> to host file in windows client.
The path for host file is in %windir%\system32\drivers\etc\hosts.
Andy Altmann
TechNet Community Support

OSD task sequence computer doesn't join domain - error NetJoinDomain failed error code is [1355]

I am using sccm 2012R2 and trying to deploy a task sequence to Ultrabook UEFI with usb Ethernet adaptor
I have inject network drivers in boot image and in sccm.
Task sequence runs fine till Setup Windows and Configuration. After this step computer reboots and boots in windows with local administrator account. Doesn't join to domain
I have tried ping domain and domain controller during Apply network Settings, I can ping fine and get an ip address as well.
setuperr.log file shows following error:
[Djoin.exe] Unattented Join: NetJoinDomain failed error code is [1355]
I can image other computer using x86 bootimage fine.
It is x64 boot image with UEFI Task sequence which is causing issues for me.
I have tested domain join AD account and able to do domain join same machine manually.
Need advise, not getting anywhere, already spend few days to figure out.
RJ
RJ09

Ultrabook I am using have SSD if this could be part of problem.
I also see errors in Panther\UnattendGC\setupact.log
[DJOIN.EXE] Unattend Join: DebugJoinOnlyOnThisError =[Null]
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
[DJOIN.EXE] Unattend Join:DsGetDcName failed: 0x54b, last error 0x0, will retry in 5 seconds
About 20 times
Exit, returning 0x0
RJ09

How do I remove personal PC from old business domain to join Windows 7 home network?

I brought my own laptop PC into a business I joined, and they registered the laptop to their domain and upgraded my Windows 7 Home to Ultimate. It was a temp assignment, now I've left the company fo another assignment, but will work from home. I've
upgraded my family PCs to Windows 7 to create a homegroup network, but I can't join this homegroup with my laptop PC, as I'm prevented from doing so while the laptop is apparently still on the domain. How can I remove my laptop from this domain, since
it doesn't apply any more?

Hi,
First of all , I would like to advice you that you must need have an administrator’s permission account of this laptop. If so, You need to leave your laptop from the domain, then you need to change the Network Location to Home Network.
About how to leave your laptop form a domain, please kindly refer to the following steps:
Step 1. Click Start button, then point to Computer.
Step 2. Right-Click Computer, then click Properties.
Step 3. Under the Computer name, domain, and workgroup settings, click Change Settings.
Step 4. Then hit Change, change the Member of Option to Workgroup, hit OK.
Step 5. You will be prompted the administrator’s account, type it.
Step 6. Then restart your computer.
About how to join a Homegroup, Please kindly refer to the following steps:
Step 1. Make sure a HomeGroup has already been created. One computer on the network must create a HomeGroup, then all the other computers can join in.
Step 2. Make sure you know the HomeGroup password.
Step 3. Click the Start button.
Step 4. Click Control Panel from the Start Menu.
Step 4. In the search box type in homegroup -> now click HomeGroup.
Step 5. From the bottom right hand corner of the window click Join Now.
Step 6. Select the Libraries you would like to share over the network. Pictures, Music Videos and Printers are checked by default. You can add Documents by checking the box. Now click Next.
Step 7. Type in the HomeGroup password.
Step 8. Click Next and wait for the computer to join the HomeGroup.
Step 9. Click Finish and you’re done.

HT5569 My 2 daughter's ipod's were joined to the network however all of a sudden they both stopped connecting., Our computer will still join. Why?

We had already connected our 2 daughter's ipod's to the nextwork and had been working for 3 months, however, all of a sudden they both stopped joining. We can still connect our computer but the ipod's wont. PLease help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

10gR2 install and computer domain name

Hello,
In the 10gR2 install doc, there is a mention of "domain name" when creating an entry in the host file, thus:
Add a line to the C:\windows\system32\drivers\etc\hosts file with the following format, after the localhost line:
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered in step 16.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
What is the domain name of my PC? It is a Windows XP machine, not hooked to a network, but accesses the Internet on an ADSL connection.
Thanks for your help!
gk

Actually. It doesn't matter.
You can use anything you like as hostname.domainname, even if you are connected or not connected to a LAN. If you are in a windows domain, you won't have chose, you have to use whatever they tell you to use.
If is you home PC, what you can do is to chose a pretty good name like woody.toystory.com and set the following:
edit hosts file as:
10.10.10.1 woody.toystory.com woody
And then rightclick on "My Computer" - Propierties - Computer Name TAB - Change Button ->
In the computer name write "woody"
The press button MORE and in the 'Primary DNS.....' write toystory.com. Ok and restart the PC
Then you can install the database
DISCLAIMER: What I am writing is valid for a database to testing/educational purposes only.

Skype freezes computer on call join/start

Skype freezes up my computer every time I try to join an active call, or someone tries to start a call with me.
Attachments:
DxDiag.zip ‏13 KB

Try to uninstall the currently installed Skype 7.1.0.105 version and install the older 6.14.0.104 version using the download links provided here:
http://community.skype.com/t5/Windows-desktop-client/ASUS-USB2-0-Webcam-not-recognized-by-Skype-6-18...
Make sure to disable automatic updates:
Tools -> Options -> Advanced -> Automatic updates ->Turn off automatic updates

Problems installing flash player for all users on a computer (domain)

Hi all,
I've had a quick search but have unfortunately not found any answers.
I've just setup a new image using WDS to install 55 new Dell computers. Flash player was installed as part of this image, the problem i'm getting is that if I log in as a domain administrator I can run flash fine with no problems, however if I log in as a domain user, and try to visit any site that requires flash, i can't seem to view any flash content.
When logged in as the domain user and navigate to control panel I can see the "Flash player settings" option and when I view installed software I an see that flash player 11 is installed.
Does anyone have any ideas as to why this might be? - Do you require admin rights to view flash files?
Any help would be extremely grateful!
Thanks.
Matt

It might be a permission problem in the Flash Player install folder. Try a clean install on the original machine.
If that does not resolve your problem, can you tell what Windows version & edition you are using?
Also check the permissions of all files in
C:\Windows\System32\Macromed\Flash
C:\Windows\Syswow64\Macromed\Flash

Networked computer will not join network automatically after restart/sleep

Situation:
I've got two computers - PowerBook 17" 1,25 GHz, iMac 2,16 GHz 24", both running OS X 10.4.8. They are networked via AirPort Express, firmware v. 6.3, in a WPA protected network. The AirPort distributes ADSL 4 Mbps connection.
Computers are set as DHCP with manual address (to keep stable LAN address)
The problem: While the PowerBook always joins the network after restart/sleep automatically, iMac in such a situation never goes online - the airport status in menu bar is on, the network is checked, but it cannot connect or be reached.
I always have to manually turn airport of from menu bar, then turn it on, then wait about 20 seconds and then manually choose name of my network.
After this procedure iMac is finally online.
Settings of the AirPort are:
AirPort tab
Wireless Security: WPA2 personal
Channel: Automatic
Mode: 802/11 g/b
Internet tab
Connecting using: Ethernet
Configure: Using DHCP
WAN ethernet port: Automatic
Network tab
Distribute IP address unchecked (no difference when checked - tested)
Any idea how to fix it?
Thanks in advance!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

Thanks a bunch, Duane!
You pointed me to the exact answer.
iMac joins the network automatically now, although I had to change original automatic login of an admin user to manual login page, because after automatic login as one of three users, an error message "Network error" appeared quicker than the actual joining the network, that came a few seconds later.
After manual logging (it probably needed a little more time) it's OK.
Thanks again and greeting from Czech Republic!
PowerBook 1,25 17", iMac 24" Mac OS X (10.4.8)

Computer will not join wifi network. Please hep

I've used it at my home, in the airport, and cafes, and it worked flawlessly, but now in my girlfriend's house I cannot join their network. I even installed a brand new Linksys router today and it still will not join. It finds the network SSID but refuses to join it. All other computers in the house have no problems.
Please help.
Thank you.

Hi Jason,
Yes, other Macs, a MacBook Pro & Black MacBook, are connected to the network. The original router had WEP security and this router has WPA2 Personal security.
I just realized my iPhone won't connect to it either. I'll try resetting it with no encryption.
How do I make a new network location?
Thank you!
Message was edited by: .jacob

Computer domain re-join

Similar Messages

Maybe you are looking for