Computer name for the WinPE

I'm trying to make a tool my technicians can use to create a backup image for an existing machine.
What I thought of was using a BAT that I could inject into my Boot images and run some really simple DISM command:
Dism /Capture-Image /ImageFile:D:\%computername%.wim /CaptureDir:C:\ /Name:"Captured Image"
Problem is the %computername% to name the WIM keeps comming up as MINWINPC.wim. It's not even the MININT-xxxxxx computer name that WinPE generates.
Maybe I'm not using the command correctly, but is there a way I can make the computer name something identifiable, like the computer's serial #?

One way to get around this is to load the registry of the offline computer in WinPE and get the computer name from there. Computer names are stored in HKLM\System\CurrentControlSet\Control\ComputerName\ComputerName and the value ComputerName.
You can find instructions for loading the offline computer's registry hive here:
http://superuser.com/questions/636055/how-to-modify-a-computers-offline-registry-from-winpe
Otherwise, you could have the script prompt for the computer name and the tech can manually enter it in.

Similar Messages

I have a MacBook Pro, how to change the computer name in the "Find Iphone"

I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

Any Function module or BAPIs are available to get scheme name for the inter

I have internal order no value in table AUFK-AUFNR , and the internal order corresponding Scheme value is available in IMPR-PRNAM . Now I want to inner join both the tables to extract the data , but there is no common field . Is there any Function module or BAPIs are available to get scheme name for the internal orders?

look at DB-VIEW "V_IVP_OR".
Regards,
Laurent

Print program name for the dunning form F150_FR_DUNN_01 in sapscript

Hi,
I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
Kindly help me.
Thanking you.
Pujarini Patra

Hi,
Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP 0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
The corresponding SAP sample Forms are:
- F150_DUNN_SF for Smartform; and
- F150_DUNN_SF for pdf Form (don't let the name confuse you )
I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
- FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
- FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for view Cluster VC_T047_F... That would save the whole effort to try to detect the type for form assigned...
Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
The selected entry is the one you are looking for to assing your custom forms, I believe.
cheers
Janis

How to find out the printer name for the Idoc

Hi guys
I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
Regards
Madhoo

Hi,
For ALE/IDOC the medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
Regards,
Nagaraj

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

Can anyone tell me the field name, table name for the following scenario?

Hi All,
Can anyone tell me the field name and the respective table name for the following scenario's?
1. A report to list all the materials to which Invoice is done and delivery is pending.
2. A report for Order tracking.
3. A report, which gives PO(Purchase Order), Pricing details.
4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from stock.
Thanks & Regards,
P.Gowrishanker
Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

I believe that OmniVision Technologies has the contract for the 3gs.

Table name for the status Cstd

Hi
Need the table name for the sales order line item status Cstd
Steps
Go to the sales order line item
go to the Tab status
under that in processing status--> system status
here Cstd is there but we are not able to find the table name for that
Strecture is RV45A and field name is STTXT
we are planing to restrict the PP order being released if the status is not Cstd
PP order should release if the status in Sales order line item is Cstd
Can you help to findout the table name foth above field
Thanks
Kameshwar Rao

Hi
Table name is VBUP and the method to check the creation of Production order is BADI workorder_update
I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
br, Ajay M

How to specify file names for the generated code in wscompile

Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanx

Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks.

Please choose a different name for the file

How can I stop this message appearning ?

By choosing a different name for the file?
You will need to provide a lot more information.
What are you trying to do when you see the message?
What version of Sqldeveloper are you using?
What operating system are you running on?

Have new Airport Extreme via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicats extender shoul have same name as main network?

Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?

Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.

How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

Alias name for the column name in Prompt

Hi,
I have a scenario where I am taking column names into prompt. I have used the following SQL in the SQL results under "Show" option of the Prompt.
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END FROM "Real Time"
My problem here is I am getting the column names into the Prompt as "Orders"."By OrderDate" and "Orders"."By ShipDate", which is not acceptable and readable for mat for the user. Is there any way that I can assign an alias name for the column name such as OrderDate and ShipDate in the above SQL.
Your quick respose is appreciated.
Thanks,
Rama

hi,
try an alternative one....in your administrator make new columns with alias to ones you want...so you wiil be able to show whatever you want.
Otherwise,is it possible to show
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' as "xxxxxxxxxxxxx"END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' as "yyyyyyyyyyyyyyyy"END FROM "Real Time"
Ending,you want the data from your columns?or just the name??
hope i helped...
http://greekoraclebi.blogspot.com/

Table names and field names for the PO item details

Hi,
I want table names and field name for the below fields.
I have PO number i want to get below fields for PO.
<b>Confirmed Ship Date (or actual ship date if already shipped) PGI Date
Quantity of Product to be shipped (base unit of measure) Sales Order Qty
Shipped Quantity of Product (normally zero)
Shipped From Plant Name</b>
Excellent reward is compulsary.
reagrds,
vijay

Hi,
Please find below the some of tables and fields for the PO. But from your query hope you are refering some other PO.
Table : EKPO
Fields
KTMNG - Target Qty
MENGE - Open Qty
WEPOS - Goods Receipt
LEWED - Latest GR date
Table : EORD
Fields
RESWK - Procurement plant
FRESW - Fixed Issuing plant
LIFNR - Vendor
FLIFN - Fixed vendor
Regards,
BK

Computer name for the WinPE

Similar Messages

Maybe you are looking for