Computer Shutting Down and Magsafe not working?

Hey guys my computer is a MacBook Pro (13-inch, Mid 2010) and i have had Magsafe issues with it since 6 months after i bought it. I had it sent in to apple and they said that they had replaced the magsafe within the computer (i am assuming that they replaced the magsafe board). Recently my computer has not been recognizing any connection when the magsafe is plugged in. No lights and the battery will not charge. It takes several tries +20 to get it to recognize the magsafe and start charging. The adapter is NOT the problem and neither is the battery. I have also already performed a System Management Controller reset (SMC) as the symptoms seemed to follow this common problem. This has not fixed it. Now my computer is shutting down randomly (it seems to do this when under light to medium cpu load or when moving) however, this is hard to tell as it has only happened three times. The computer only seems to shut down when the magsafe is connected and recognized (either red or green light). When it shuts down i can hear the HDD needle "park" rather abruptly/loud as an audible CLICK can be heard. Upon reboot, the computer will again refuse to recognize that the magsafe is plugged in. Again, no lights on the magsafe connector, and the battery will not charge. This issue could brick my macbook unless i fix it soon. Please any help??? I really hope that nothing is wrong with the logicboard as they can run upwards of $600 to replace. PLEASE HELP MEH!!!
Some additional background: I had sent in my macbook to apple 3 times already through futureshop while under warranty. The problem was that the magsafe only seemed to work while plugged in with the cord running away from the user. They sent it back twice while only swapping chargers... of which i knew there was no issue with. The same magsafe problem was there. The third time is when they finally swapped out the magsafe in the computer. My one year warranty is now over and it has been about 8 months since i got my computer back since being repaired last time. I have no applecare warranty. Is there any way that this could be fixed under warranty??? Is there some kind of apple replacement warranty if something has been sent in so many times with the same problem??? Thanks and sorry for so much writing...

Hi there
I just posted a quite similar issue today.
My solution was to simply run Disc utility and see whether it finds any problems/errors. It did find an error and after booting to Recovery partition and running Disc utility from there, I let it repair the volume.
Until now, no more random crashes on moving.
Hope this helps you too
Hugs
malzbier
My thread: https://discussions.apple.com/thread/4178258

Similar Messages

  • HT4623 when i start the update ios6 for iphone 4 that time my computer shut down and from then my i phone just showing connecting to itune but when i connect to itune my phone not shown plz help

    when i started updating my iphone by itune that time my computer shut down and update collapse from that time my screen shows only itune logo and a cable to connect this. already i did but now my phone is not showing in itune

    You must have the credentials that were used to turn on Find my iPhone on the device. Without them, you can not get past the activation lock.

  • Computer shuts down and reboots when downloading ios 5

    my friend its trying to update his ipod touch 4th gen 64gb to ios 5 but both his i mac pro and windows 7 computer shuts down and reboots with the download gets to 50%

    Searching the forum before posting is a good idea. This subject has been covered ad nauseum
    Bottom line: Uninstall the Google Maps update by going to Settings>Applications>Manage Applications>Maps and hitting the Uninstall Updates button.
    There is a bug in the GPS driver.  Lenovo claims to be working on it.  Do not install the maps update until Lenovo fixes it.

  • Help! While editing a photo in CS3 the program shut down and will not reopen my psd file.

    Help! While editing a photo in CS3 the program shut down and will not reopen my psd file. The error message reads "cannot complete your request because of a program error" -- it is a very large file (I have been saving it all along) and I had just "flattened layers" and went to open up a new, blank photo file when it shut down. Is there anyway to get this file to open? Any advice would be greatly appreciated! (p.s. after reading a couple of similar threads, I have a feeling it's hopeless. But I'd also like to know WHY this might have happened!) Thanks in advance!

    Thank you. I appreciate you taking the time to respond and for sharing the article--I did panic. Here are the details of my system:
    Model: HP p7-1247c
    Processor: AMD A8-3820 APU with Radeon HD Graphics
    Installed Memory: 8 GB (7.48 usable)
    System Type: 64-bit
    Windows 7 Home Premium
    I am using Photoshop CS3. It seems that I can work on photos and save them. But I am unable to open them back up. I have tried saving the files as psd and tiff with the same result. The error message is:  "cannot complete your request because of a program error"
    The interesting thing is that I can open up InDesign and "place" the psd file within InDesign (then export and save as a jpeg). So I don't think the files are necessarily corrupted. I uninstalled Photoshop and reinstalled it last night, but there's no change.
    If you have any ideas, I'd appreciate it. Or, should I repost my question with this more complete info? Thank you!

  • My computer shut down and I had to erase everything. Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. How do I save all the music on the computer? will new music from iTunes erase the old?

    my computer shut down and with help from Appel it turned out that I had to erase everything . Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. I do not have backup :-(
    How do I save all the musicfrom the iPod on the computer?And if I buy new music from iTunes will it erase the music allready on the iPod ?
    iTunes no longer recognise my iPod.
    I hope someone can help!
    Best Maria

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when  it shut down,

    My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when  it shut down,

    Hey Sarahbetts,
    Thanks for the question. If I understand correctly, the MacBook will not turn on. I would recommend that you read this article, it may be able to help the issue.
    Troubleshooting: My computer won't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • HT1430 I was charging and updating my mini ipad last night when it suddenly shut down and will not turn on since then. What do I do?

    I was charging and updating my mini ipad last night when it suddenly shut down and will not turn on since then. What do I do to turn it on again?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My IBOOK has shut down, and will not start back up

    ok here is what has happened. yesterday my 1.2ghz g4 ibook started randomly shutting down. it would shut down and it would take a while of me pushing the power button to get it to start back up. when it would come on, it would switch between charging and not charged quite rapidly even though my power cord was in. now however, it has shut down and will not start up. the battery is fully charged. anyone have any ideas?

    I'm telling you. I have lost all faith with Apple. The old iBook I had, 800MHz G4, simply worked fine with no problem waking up or starting up, although it's just a bit slow. Now, I am super frustrated when it just couldn't wake up, either with the sleep light flashing or not, ie it's black screen initially and when I press the Power button once to get it back to life, it just stays black!!!
    So the only thing to do is to force power down by pressing the Power button for 10 seconds. Then I press the Power button once to start up, but it just stays black screen. I've left my iBook in that state for a day now, hoping that it will come back alife. But no! And the worst is, I had a similar problem starting up from wake just the day before. I called the Help Desk and they advised me step by step, from taking out the battery, to pressing OptionsCommand+PR, and OptionsCommand+OC, and doing Apple Hardware Test. The iBook seems to just work fine while on the phone with them. And barely 3 hours later, the thing just couldn't wake up. I've powered down and up many times now, and I've left it powering up, but still black screen till now (one day already).
    Finding out about resetting PMU on the support page, I've also tried that, but it still can't work.
    And you know what? I've sent this unit for repair 3 times already! First they say it's the HDD problem, so they changed that. Then when it still happened, they say it's the logic board problem, so they changed that for me. And again when it happened, they changed another logic board for me. So now, it's the fourth time, what do you think I should do? I don't think going back changing another logic board will help!
    I am in fact ****** off! If Macs are great, then why me? Why my iBook? I am telling this forum that we cannot accept a big corporation giving us sub-standard products. I've since read this forum carefully and found that many of us faced the same problem! We just cannot sit down idly and let the company get away with it. This is a warning to fellow users out there that face this same problem. Let us voice out our frustrations and make Apple give us some compensation for it. I say this because I depend on my laptop iBook for presentation to clients, and this happened exactly twice when I was in front of my clients. I don't mind losing face but can Apple compensate me for my loss of business and future business from my clients?
    Voice out strongly your unhappiness to Apple now!

  • My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

    My Ipad2 just shuts down and will not turn on. Rebooting does not help. He switched on when I start charging it. In this case, the battery is charged.

    Standard troubleshooting steps in the following order:
    1. Reset: Press the sleep/wake button & home button at the same time, keep pressing until you see the apple logo, then release. Ignore the slide to power off.
    If no change, continue:
    2. Restore your phone from a backup, note: if the problem is related to corrupt data, while this will restore a fresh OS, it will also restore the problem.
    If no change, continue:
    3. Restore as a "new" phone in itunes & re-sync your content. All saved data will be lost.
    If no change, make an appointment at an Apple store.

  • HT1222 I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • HT4993 my iphone just shut down and will not turn back on can anyone help or dod I need to go to the apple store for help....

    NEED HELP PHONE SHUT DOWN AND WILL NOT TURN ON. IT IS PLUGGED IN BUT WONT POWER ON THERE IS NO PROBLEM WITH THE CHARGER I HAVE TRYED 3 DIFFERENT ONES CAN ANYONE HELP OR DO I NEED THE APPLE STORE??????

    Hello jaicob1990,
    Try the steps in the article below; it will give you multiple options on how to resolve the issue.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS1538 my iphone shut down and will not turn on.  how do i get it to turn on?

    my iphone shut down and will not turn on.  how do i get it to turn on?

    Connect iPhone to Wall Charger for 10 minutes it may turn ON itself. If still OFF, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

  • My iphone 5, 32g keeps shuttng down and restarting, sometimes at night, it just shuts down and will not restart.

    My iphone 5, 32g keeps shuttng down and restarting, sometimes at night, it just shuts down and will not restart.

    This can happen with faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.

  • HT1766 After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    Hello Wilson@w,
    The article linked below details the process of placing your device in recovery mode in order to complete the update.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

  • Was updating iPod and computer shut down and now my iPod is frozen with itunes symbol and USB symbol on front of iPod???

    I was updating my iPod and computer shut down and now my iPod is frozen with iTunes logo and USB symbol on front and is unresponsive.  Any ideas?

    Have you checked the knowledge base articles
    http://support.apple.com/kb/HT1808
    http://support.apple.com/kb/TS3281

Maybe you are looking for

  • I can't download a few songs in my iPod

    I can't download a few songs (in iTunes) in my iPod (bought in my iMac)

  • Function module CREDIT_INT_RATE_DETERMINE

    Hello, I'd like to have more information about the field FBFROM in the function module CREDIT_INT_RATE_DETERMINE used to calculate the interest. It should be the Date from which interest rates are calculated but I don't understand the meaning. I have

  • STO GR

    Hi Friends, I have one question. Actually I have a stock transport order and an outbound delivery is created with respect to that STO.Goods issue is done from the supplying plant using the outbound delivery reference. My question is can we do goods r

  • How to schedule business rule in Planning

    HI, Is it possible to schedule Business Rule on specified time, i mean automation to execute business rule after certain events or date. Secondly can we run maxl file using windows scheduler? Regards Kumar

  • Formula to deviate the needle of 3dguage in sap XMII

    i m getting confused about the formula to deviate the needle position.i found lot.but i dont know which one suits well.