Concatenate variable and words

Hi, I need to concatenate a variable with the apostrophe:
NAME := :CUSTOMER.NAMES;
When I store some data in the variable codigo, I need to query to the database:
SELECT * FROM CUSTOMERS WHERE NAME = 'ANGEL', but the 001 must be in some varible so:
SELECT * FROM CUSTOMERS WHERE NAMES = NAME --> Name is VARCHAR2 y for the Oracle execute the query, i need that NAME be whit the apostrophe. --> ''||NAME||'' --> This concatenate don't operate.
Thanks.

Hi Abdellatif,
Ok, that would clarify things.
You have an idea if this is documented somewhere?
Reason we ask:the "xi3-1_designer_en" guide, the specification for the @variable function states:
"BusinessObjects system variables. ...
Report variables. ...
Operating system variables. You can enter Windows environment variables in order to obtain information about your installation.
Custom variables. With Desktop Intelligence, you can use a predefined text file to provide a list of fixed variable values."
There's no explicit referal to DeskI only for OS system variables, like there is for custom variables.
Thanks!
Raf

Similar Messages

What is the difference between variable and Define

WHAT IS THE DIFFERENCE BETWEEN
these different declarations when it is done using the keyword "variable" and "define"
and both of these are done OUTSIDE "DECLARE"
VARIABLE g_monthly_sal NUMBER
DEFINE p_annual_sal =5000
-- I understand that p_annual_sal will be taken as a CHAR.
-- ALSO IF DEFINE variable acts as macro variable, SO is it necessary to give it some value whenever we define it.
if not what value would be substituted for it?
OR does that mean whenever we want to specify data type for a bind varible we should use VARIABLE and
when we do not want to specify type we use DEFINE?
THANK YOU
Edited by: user6287828 on Feb 24, 2009 11:03 AM
Edited by: user6287828 on Feb 24, 2009 11:04 AM

Both are SQL*plus commands. In a real programming environment you will not use such constructs (except a few rare scripting cases).
The difference is how the construct is later used. DEFINE is more like a copy&paste string. Whereever the name of this substitution variable is found it will be pasted into the sql*plus session.
VARIABLE creates a real variable. You can change the value and if follwos the usual principles of variables (including binding).
Example can be found the docs:
from the docs
Where and How to Use Substitution Variables
You can use substitution variables anywhere in SQL and SQL*Plus commands, except as the first word entered. When SQL*Plus encounters an undefined substitution variable in a command, SQL*Plus prompts you for the value.
You can enter any string at the prompt, even one containing blanks and punctuation. If the SQL command containing the reference should have quote marks around the variable and you do not include them there, the user must include the quotes when prompted.
SQL*Plus reads your response from the keyboard, even if you have redirected terminal input or output to a file. If a terminal is not available (if, for example, you run the script in batch mode), SQL*Plus uses the redirected file.
After you enter a value at the prompt, SQL*Plus lists the line containing the substitution variable twice: once before substituting the value you enter and once after substitution. You can suppress this listing by setting the SET command variable VERIFY to OFF.
Using Bind Variables
Bind variables are variables you create in SQL*Plus and then reference in PL/SQL or SQL. If you create a bind variable in SQL*Plus, you can use the variable as you would a declared variable in your PL/SQL subprogram and then access the variable from SQL*Plus. You can use bind variables for such things as storing return codes or debugging your PL/SQL subprograms.
Because bind variables are recognized by SQL*Plus, you can display their values in SQL*Plus or reference them in PL/SQL subprograms that you run in SQL*Plus.
Creating Bind Variables
You create bind variables in SQL*Plus with the VARIABLE command. For example
VARIABLE ret_val NUMBER
This command creates a bind variable named ret_val with a datatype of NUMBER. See the VARIABLE command for more information. (To list all bind variables created in a session, type VARIABLE without any arguments.)
Referencing Bind Variables
You reference bind variables in PL/SQL by typing a colon (:) followed immediately by the name of the variable. For example
:ret_val := 1;
To change this bind variable in SQL*Plus, you must enter a PL/SQL block. For example:
BEGIN
:ret_val:=4;
END;
/

Concatenate text and property of dimension in script logic

hello experts,
how to concatenate text and property of dimension in script logic?
as example:
dimension : interco
property : mgmtallocdefcc
*WHEN TIME.YEAR
*IS %YEAR_VAR%
*REC(EXPRESSION=%VALUE%,ACCOUNT=12345,ENTITY="I_" [INTERCO],MGMTALLOCDEFCC)
*NEXT
then it will read all as text: I_[INTERCO].MGMTALLOCDEFCC
for example the value of property mgmtallocdefcc in interco dimension (INTERCO.MGMTALLOCDEFCC) is ABCDE.
what i expect is :I_ABCDE
thanks!

Hi Yoki,
Concatenation is only possible between text and variables %VAR% or $VAR$.
Like ENTITY=I_%SOMEVAR%
But in your case instead of concatenate you have to use other property like TARGETENTITY having valid ENTITY members:
ENTITY=INTERCO.TARGETENTITY
B.R. Vadim

CVP Call Studio - concatenate variable data

Hello,
I'm new to Call Studio, do not have my hands on the software yet.
Is it possible to concatenate variable data within a call studio script?
The business wants to capture IVR menu selections for reporting purposes. The IVR is complex and will require a CVP VXML server application. My plan is to utilize a call variable within call studio, update the variable with flags/values for each menu selection, then send this data back to ICM. In ICM, I will analyze this variable and set call types accordingly for reporting.
Thanks in advance,
Mike

Got it.
ok, so in call studio i would do it like this.i would define one variable say session data "retVAL" and update its value based on menu selection.
if you closely loom at attached screenshot everything is there. value of all 3 menu options are concatenated and assigned to session data called retVAL using substitution builder.
and the value of same variable is returned to ICM using CVP sub dialog return.
regards
Chintan

Query about User Variables and Advanced Actions

Hello,
I am creating a clinical-based project using Captivate 5.I have to give you quite a bit of information before I can pose my questions so please bear with me.
Users have to select multiple options from a checkbox widget (shown below).
Each options, for example 'location' is associated with a variable for example 'hpi0' (See below):
Each option has addtional data associated with it:
Location = hpi0 (user variable)
Location data = hpi0data (user variable)
Please see the screenshot below:
Notice in the image above that I have created a conditional advanced action - if the user selects Location (hpi0) on the checkbox widget, the data associated with that variable will be presented to them. That data (e.g. location data or hpi0data) is presented in a caption text box in the following slide. (see below)
I hope I have given you enough information.This is a complex project and this is just one of my many problems.I have had to create over 200 hundred user variables and more than 6 Conditional Advanced Actions in one project. The project is becoming unstable. So here are my queries:
1) Are there limits to the amount of user varables I can create in a project?
2) If so, how can I re-use the user variables I have already created? Otherwise I will have to divide this project into 3 parts and I want to avoid doing that.
3) Are there limits to the amount of Advanced actions I can create in a project?
Again I am using Captivate 5 for this project.
Any assistance, tips or tricks would be greatly appreciated. I am learning captivate as I go so If there is away to streamline this process, I am open to any suggestions.
Thanks
Tinukwa

Hello Tinukwa
This is indeed a challenging project, and although I did create a lot of projects with advanced actions, they were never that size. You have to listen to Jim's words about using some widgets, he is a widget specialist which I'm not. I do not know if you are aware of the fact that the checkboxes widget coming with Cp was extended by Jim? He offers it on his website, I blogged about this extension and suppose you do know my blog. About the advanced actions, perhaps I could help but only screenshots are bit limited. So I wonder if either I could have access to the file and/or if we could have a Connect session eventually?
First intuition tells me
we should look to re-use variables, but I do need more information; do you need the vars XXXXdata somewhere else later? If not, perhaps only to display it you could use one variable; now you keep the information chosen by the user in 2 variables: hpi0 and hpi0data (isn't that redundancy?)
and by choosing labels for variables, actions and objects in an intelligent way reduce the editing time because you'll need a lot of almost identical advanced actions. Usually I do a lot of reflection before starting to create labels, variables and actions.
About re-using what you already constructed: as I explained once, a template is the only way to be able to re-use a script at the moment. And Kevin Siegel discovered (so gratefully for that) it is possible just to change the extension of a standard CP file to cptl to have a template.
Lilybiri
PS Jim suggest also to split up the project? Here I'm not sure if that is really needed.. should have been the case for previous versions.

Difference between reference variable and object ?

I am getting confused with reference variable and object ?
1. int a; // is a variable
2. Car c = new Car(); // is a object of car type
Suggest me what are the difference between the two.....

jverd wrote:
Shelby wrote:
Something about an interned string literal?_
I remember something from class about the way Java treats strings that contain the same data. yawmark
posted a link for me that cleared up my confusion. thanks yawmark.
>>
Can you actually point back to the original reference?Not clear what you're asking here. Nothing points to references. References point to objects.
Goodness, correct wording is as important as getting the syntax right, isn't it? ;-} What I was trying to ask is if it is possible to point back to the same String once you change the pointer on the variable?
And you answered my question succintly with the rest of your post. thanks jverd
>
String str = "abc";
str = null;'At this point, we've lost the reference to the original String object. However, at runtime, the VM will still be maintaining it in the constant pool. For any non-constant-pooled object, as we're writing our code, we'd have no way to refer to that object again. In this case, we are able to refer to the same object later in our code by simply using the same string literal. "abc" elsewhere in our code will cause the VM to give us a reference to that same pooled String. Same goes for Integer, etc. in the range -128..127.
However, it's not good design to rely on this. If your design requires you to later point to "the same object" (as opposed to any object of a compatible type and holding the same contents), then you should explicitly maintain a reference to it. In the case of Strings, you really shouldn't care whether it's the same object or not. All you care about is the character sequence that defines the String's state.

What is difference between local variable and property node ?

What is difference between local variable and property node ?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
- Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
- Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Race condition.vi ‏9 KB
Compare Locals Properties and Wires.vi ‏18 KB

Wrong ASCII values for control characters in Variables and Stack Call in CVI2013?

Hi,
I think there is an error in "Variables and Call Stack" window if you want to look for your variables in ASCII format.
The control characters (0 - 31) are not shown correct. They are shifted 2.
For example:
Character in Decimal format is 10 (LF) but when you are chancing to ASCII format it is showing \012.
The same with 13 (CR). This character is \015 in ASCII format.
I think that was no problem in CVI2012.
Best regards
Gunther
Solved!
Go to Solution.

I'm not using CVI2013 yes so I cannot respond regarding this specific product, but the code you are showing are the octal equivalent of the decimal value you specified: it could be that control characters (or generally speacking non-printable ones) are replaced with their octal equivalent in string view.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Can I mix Pages page layout and word processing together in one document?

Hello there ! I am quite new to Pages and I am desperate to learn as i want to get rid of everything being Microsoft
As you all know when you open Pages you can choose between page layout and word processing !
the thing is i thought that after using a page layout you could just go with word processing easily... well no, you can't, but i'm sure i'm missing something...
For exemple i really like the catalogue brochure and it would be perfect for me to start a project... but after a few pages, i can just add blank pages and if i want to type text, i have to add text boxes... i don't want that, I want word processing... and another thing in this brochure i can't add table of content because it is not by default in the template...
So my question is quite basic here, can we link Page layout and word processing without having to use text boxes and everything ?
Thanks in advance !
Have a good day

Alexander,
Welcome to Apple discussions.
The simple answer is no. What differentiates page layout from word processing mode is that the PL mode has no text layer. So everything that goes on the page must be an object of some kind. And any pages you add to a PL document must also be PL. You can't mix the two modes. One way around it is to start with a blank page, insert a text box, then stretch the box so that it covers the entire page. You can the type in it as if it were a text layer in a WP file. You can even capture that page so that you can add it automatically when you need it, or save it as a template.
As for building a Table of Contents, it appears that Pages only sees text styles that are on the text layer, which means it won't see styles that are in objects -- which means it won't work with a PL document. From being a long-time reader of this discussion group, I've noticed it's rare that someone wants to add a ToC to a PL document.
If you find that you're going to be mixing text and graphics, start with a word processing template. If you really like the Catalog Brochure, you could always copy some or all of its elements over to a blank WP template.
Hope this helps.
-Dennis

Can I search for pdf and word documents at the same time in finder?

I often want to search for more than one file type at a time - for instance pdfs and word docs in a directory, or Jpgs, GIFs, PNGs etc.
Can I do this in the finder in one go (so I can save it as a folder I can then select when I want to)?
I tried typing OR between the 'tokens' it creates, but then it just searches for OR - so not as intelligent as one would think?!
Surely there must be a way to do something as simple as this?
regards
Rob

Forget the whole "tokens" business (I think that is a pretty useless "improvement" to constructing Spotlight searches). Hit command-F to bring up the search window, and set your first criteria, in the example I changed it from the default Kind to Created Date, to keep the number of results manageable. Now hold down the Option key and click on the "+" at the end of the criteria line, it will change to "..." and you get a new criteria line. From the dropdown menu choose "Any" if necessary (this will give you the Boolean OR), then enter what you want in the first sub-head. To get a second sub-head OR criteria click the "+" at the end of the Any line.
I don't generate many MS Word docs, so I just stopped in the example above after typing Microsoft, since that brought up all the MS anything I have from this year (a couple of Power Point thingies sent to me by friends).
Francine

Bind Variables and Shared Component Report Query

I have a query in a region report which I have replicated to a shared component report query.
Both queries reference page items as bind variables in the where clause.
The report region on screen shows the correct results but the report query shows "no data". This is the case when running "Test Query" and "Download XML data" from the shared component report query definition. If I hardcode the variable names I get rows returned, If I use bind variables - and specify the values for these variables I get no data. THe XML file contains the tags for each bind variable I have specified but has no data between the tags. I have Ticked the box to include application and session state but it appears that the bind variables are not being used.
When I use my report query in the application (URL tied to a button) I get the same problem, the binds are not being passed to the report query.
Can someone please clarify if this is a bug or not? And if not, how can I get it to work.
I am using Apex 4.0.2
Thanks
Kathryn

Hi
To confirm, yes I selected the bind variables. I used these in the report layout, but the xml file has them as empty i.e.
<P0_START_DATE><P0_START_DATE/> with nothing in between.
IN the Test Query section, if I put real values in the boxes for the bind variables, I get no data found. If I hardcode the values into the query, I get the data.
I've repeated the create report query many times and have created a report layout in RTF. I can use the layout with my region - in the print attributes and the layout works with the query but I need to create a PDF using 2 queries - ROWSET1 and ROWSET2. I can generate the XML but the values in the rows are all empty. When I use the layout with a report query instead of the region, I get no data even though I have used the same sql and have selected the bind variables. I was using variables from page items on page zero but have also tried using page items on the current page, the result is the same.
I need to use a report query and a report layout as I need data from 2 queries in the PDF.
I looked at your demo - what happens if you add a second sql query to the report query - is there any chance I can look at the back end (developer access?)
Thanks for your input
Kathryn

How to store the value into variable and access it in RMAN script

I want to create a variable and dynamically assign a numeric value to it (may get the value may be from SQL )and access the value in RMAN script.
Thanks...Raj

Raj,
We have been getting this type of request and it is not possible via RMAN to do that.
BUT--You could write a sql/plus script to query your variable and produce the RMAN script with the new value.
Just a suggestion.
Tammy

Session variable and initialization block issues

We are using OBIEE 10.1.3.3 and utilizes built in security features. (No LDAP or other single sign on). The user or group names are not stored in any external table. I have a need to supplement Group info of the user to the usage tracking we implemented recently as the NQ_LOGIN_GROUP.RESP column contains username instead of group name. So I created a session variable and associated with a new initialization block and also had a junk default value set to the variable. In the initialization block, I wrote the following query and as a result it inserted correct values into the table when the TEST button was clicked from the initialization block form.
insert into stra_login_data (username, groupname, login_time) values ('VALUEOF(NQ_SESSION.USER)', 'VALUEOF(NQ_SESSION.GROUP)', SYSDATE)
My intention is to make this execute whenever any user logs on. The nqserver.log reports the following error and it doesn?t insert values into the table.
[nQSError: 13011] Query for Initialization Block 'SET_USER_LOGIN_BLOCK' has failed.
[nQSError: 23006] The session variable, NQ_SESSION.USER, has no value definition.
[nQSError: 13011] Query for Initialization Block 'SET_USER_LOGIN_BLOCK' has failed.
[nQSError: 23006] The session variable, NQ_SESSION.GROUP, has no value definition.
When I changed the insert statement as below, this does get populated whenever someone logs in. But I need the values of GROUP associated with the user as defined in the repository.
insert into stra_login_data (username, groupname, login_time) values ('TEST_USER', TEST_GROUP', SYSDATE)
Could someone help me out! As I mentioned above, I need the GROUP info into the usage tracking. So, if there is another successful approach, could you please share?
Thank you
Amin

Hi Amin,
See [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=3376946&#3376946]. You can't use the GROUP session variable in an Init Block unless it has been seeded from an Init Block first. There isn't an easy solution for what you want, but here are some options:
1) Create a copy of your User => Groups assignments in your RPD in an table so you can use it in your Usage Tracking Subject Area. But this means you will have to replicate the changes in two places so it's not a good solution.
2) As the GROUP session variable is populated when you login you could theoretically use it a Dashboard and pass it a parameter to write the value to the database. But as I am not sure how can you make fire only once when the user logins it sounds like a bad idea.
3) Move your User => Groups assignments from your RPD to a DB table. Use OBIEE Write Back or something like Oracle APEX to maintain them.
I think 3) is the best solution to be honest.

How can I download excel and word

I need work in excel and word in my iPed - please guide

You cannot download or install Word or Excel for the iPad. MS has not released an iOS version.
There are MS Office compatible apps available in the app store like Quick Office Pro and Documents to Go. Take a look at those and see what you think. Apple also has their iWorks suite of apps, Pages, Numbers and Keynote that are compatible with the MS Office apps.

How can I use excel and word on the IPAD2

How can I use excel and word documents on my Ipad 2

There are apps such as Documents To Go which support reading/editting/creating those sorts of documents :
standard version - http://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
premium version - http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8

Concatenate variable and words

Similar Messages

Maybe you are looking for