Concurrent program required on a single node with RAC connfiguration

Hai all,
RAC with 11.5.10.2 on Linux . 2 DB server with 2 app server with concurrent managers
running on only one node..
We have requirement to run a concurrent program and its child process to run on only one
node of the RAC DB. Since this is not possible in this version and possible with 12.1 as per the note
Method Of Always Running A Specific Concurrent Program On One Particular Node [ID 1070621.1] .
We created a concurrent manager and under Specialization rules, we added all the program that
we required. now in the concurrent manager -define form - under the primary and secondary node
- do I have to set the node as one of the database server (or) one of the apps server.
RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156.1]
Please advise.

We created a concurrent manager and under Specialization rules, we added all the program that
we required. now in the concurrent manager -define form - under the primary and secondary node
- do I have to set the node as one of the database server (or) one of the apps server.
RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156.1]
Please advise.You only need to set the name of the node where the CM is running (under "Primary Node").
If you have PCP implemented, then you can type the name of each node where CM is running (CM node1 and CM node2).
Thanks,
Hussein

Similar Messages

Verification of steps to convert Single Node to RAC

Hi Forum
I have a single node Oracle E-Biz 12.1.3 Installation.
We plan to convert this to a dual node RAC install and I wanted to run by the steps to perform this AND clone over the current production system to the new RAC system
(note this will not be using ASM - but will be based on NetApp NFS)
1. Install GRID 11.2.0.3
- installed acorss two nodes, Binaries can be shared
- voting disks / cluster rigistry MUST be shared
2. Install Database Software for RAC
- Binaries cannot be shared and must be installed on each node independently
3. Configure the GRID for database (database / listeners)
4. Clone over the stand alone system (clone database as RAC)
I will be using SCAN - and therefore would expect all the web services / concurrent manager nodes to point to the SCAN hostname as opposed to individual host names,
Are there any decent technical notes out there that will help please?
Is there any HUGE miss I have made here
Thanks in anticipation

Hi,
I belive googling "single node to RAC" should give you a lot of articles and you can select any article based on your source database version and new version (11.2).
Since it is EBS database, probabl posting question on EBS forums will give you answer faster because you will find a lot of apps DBAs who would already have done this.
Salman

Migration from Single Node to RAC Node

Hi,
We are planning to migrate the Database from Single-Node to RAC Node. Are there any checklist list to be considered regarding Performance, System and Database ( or any other topic), before migrating to RAC.
Thanks

If it is already the same version, you will need to focus any "single-threadedness" of the application like sequences that are mandatory sequential, "semaphore-style" locking etc...
My experience is that going RAC and in particular to ASM can give a performance boost. If it is the same version (11gR2 for example) then any statistics-related performance issues will still be there.

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

Query to find Concurrent requests executed on each db node in RAC from in last 24 Hours

Hi
Could you please help me in getting the query to find total number of concurrent requests executed on each db node in Two DB Node RAC with PCP ( Two CM Nodes) in last 24 hours.

c2670397-8171-480e-b9f8-8874e77ee0b4 wrote:
Hi
Could you please help me in getting the query to find total number of concurrent requests executed on each db node in Two DB Node RAC with PCP ( Two CM Nodes) in last 24 hours.
Query FND_CONCURRENT_REQUESTS table (ACTUAL_START_DATE and ACTUAL_COMPLETION_DATE columns) -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_REQUESTS&c_owner=APPLSYS&c_type=TABLE
https://community.oracle.com/message/10780262#10780262
https://community.oracle.com/message/10589420#10589420
Thanks,
Hussein

How to change from single Node to RAC for AIA

Recently I have installed AIA 11.1.1.5, but during installation I selected single node. But now I would like to configure it to use RAC. How to do it? Reinstalling is not an option.

Hi,
Hope this helps
http://proskudin.blogspot.com/2007/06/two-level-tabs.html
Br,Jari

R12 Concurrent managers + forms on a single node?

He friends
I wanted to have your views on the following topic.
Currently I have an 11.5.10 Apps setup on 2 different nodes.One hosting forms + apache and second one hosting DB and Concurrent managers.
Now I am moving on R12 on new poweful servers both for apps and Db.
My team is planning to have the concurrent managers+ forms ..in fact all services inclusive of discoverer on one node and only DB on the second node.
Kindly provide your views.
Kam.

My team is planning to have the concurrent managers+ forms ..in fact all services inclusive of discoverer on one node and only DB on the second node.
Kindly provide your views.This should be OK as long as you have sufficient resources on that node.
Thanks,
Hussein

Moving RAC/ASM to single-node non-rac SET NEWNAME not working

Good morning,
I'm trying to restore a rac/asm database to a non-rac environment to simulate disaster recovery under worst-case circumstances.
Here is as faras I have been able to get
1) Restored pfile
2) modified pfile to remove references to RAC settings (note, did not set db_file_create_dest, db_file_name_convert, etc)
3) Restored controlfile successfully
4) Mounted database
At this time I run the following rman script which covers all temp and datafiles (there's some skipped numbers where datafiles have been removed previously)
run {
set until time "to_date('2009/11/29 03:00:00','YYYY/MM/DD HH24:MI:SS')";
set newname for tempfile 1 to '/mnt/data/oradata/pmi/temp_1.dbf';
set newname for datafile 1 to '/mnt/data/oradata/pmi/system_1.dbf';
set newname for datafile 2 to '/mnt/data/oradata/pmi/undotbs1_2.dbf';
set newname for datafile 3 to '/mnt/data/oradata/pmi/sysaux_3.dbf';
set newname for datafile 4 to '/mnt/data/oradata/pmi/undotbs2_4.dbf';
set newname for datafile 5 to '/mnt/data/oradata/pmi/undotbs3_5.dbf';
set newname for datafile 6 to '/mnt/data/oradata/pmi/users_6.dbf';
set newname for datafile 7 to '/mnt/data/oradata/pmi/atend1_7.dbf';
set newname for datafile 8 to '/mnt/data/oradata/pmi/atendidx1_8.dbf';
set newname for datafile 9 to '/mnt/data/oradata/pmi/cwmlite_9.dbf';
set newname for datafile 10 to '/mnt/data/oradata/pmi/datafeedsidx1_10.dbf';
set newname for datafile 11 to '/mnt/data/oradata/pmi/drsys_11.dbf';
set newname for datafile 12 to '/mnt/data/oradata/pmi/dynamic1_12.dbf';
set newname for datafile 13 to '/mnt/data/oradata/pmi/dynamicidx1_13.dbf';
set newname for datafile 14 to '/mnt/data/oradata/pmi/intermedia_14.dbf';
set newname for datafile 15 to '/mnt/data/oradata/pmi/notesidx1_15.dbf';
set newname for datafile 16 to '/mnt/data/oradata/pmi/odm_16.dbf';
set newname for datafile 18 to '/mnt/data/oradata/pmi/pacific_data_large_18.dbf';
set newname for datafile 19 to '/mnt/data/oradata/pmi/pacific_data_medium_19.dbf';
set newname for datafile 20 to '/mnt/data/oradata/pmi/pacific_data_small_20.dbf';
set newname for datafile 21 to '/mnt/data/oradata/pmi/pacific_data_xlarge_21.dbf';
set newname for datafile 22 to '/mnt/data/oradata/pmi/pacific_index_large_22.dbf';
set newname for datafile 23 to '/mnt/data/oradata/pmi/pacific_index_medium_23.dbf';
set newname for datafile 24 to '/mnt/data/oradata/pmi/pacific_index_small_24.dbf';
set newname for datafile 25 to '/mnt/data/oradata/pmi/pacific_index_xlarge_25.dbf';
set newname for datafile 26 to '/mnt/data/oradata/pmi/pmi_data_large_26.dbf';
set newname for datafile 27 to '/mnt/data/oradata/pmi/pmi_data_medium_27.dbf';
set newname for datafile 28 to '/mnt/data/oradata/pmi/pmi_data_small_28.dbf';
set newname for datafile 29 to '/mnt/data/oradata/pmi/pmi_data_large_29.dbf';
set newname for datafile 30 to '/mnt/data/oradata/pmi/sysaux_30.dbf';
set newname for datafile 31 to '/mnt/data/oradata/pmi/pmi_data_xlarge_31.dbf';
set newname for datafile 32 to '/mnt/data/oradata/pmi/pmi_index_large_32.dbf';
set newname for datafile 33 to '/mnt/data/oradata/pmi/pmi_data_medium_33.dbf';
set newname for datafile 34 to '/mnt/data/oradata/pmi/pmi_index_medium_34.dbf';
set newname for datafile 35 to '/mnt/data/oradata/pmi/pmi_index_small_35.dbf';
set newname for datafile 36 to '/mnt/data/oradata/pmi/pmi_index_xlarge_36.dbf';
set newname for datafile 38 to '/mnt/data/oradata/pmi/portal30_38.dbf';
set newname for datafile 39 to '/mnt/data/oradata/pmi/portal_app_helpdesk_39.dbf';
set newname for datafile 40 to '/mnt/data/oradata/pmi/static1_40.dbf';
set newname for datafile 41 to '/mnt/data/oradata/pmi/staticidx1_41.dbf';
set newname for datafile 42 to '/mnt/data/oradata/pmi/tools_42.dbf';
set newname for datafile 43 to '/mnt/data/oradata/pmi/xdb_43.dbf';
set newname for datafile 44 to '/mnt/data/oradata/pmi/pmi_index_small_44.dbf';
set newname for datafile 46 to '/mnt/data/oradata/pmi/pmi_index_medium_46.dbf';
set newname for datafile 47 to '/mnt/data/oradata/pmi/pmi_data_small_47.dbf';
set newname for datafile 48 to '/mnt/data/oradata/pmi/pmi_index_large_48.dbf';
set newname for datafile 49 to '/mnt/data/oradata/pmi/pmi_index_xlarge_49.dbf';
set newname for datafile 50 to '/mnt/data/oradata/pmi/system_50.dbf';
set newname for datafile 52 to '/mnt/data/oradata/pmi/pmi_data_xlarge_52.dbf';
set newname for datafile 54 to '/mnt/data/oradata/pmi/pmi_index_medium_54.dbf';
set newname for datafile 55 to '/mnt/data/oradata/pmi/acctdb_data_55.dbf';
set newname for datafile 56 to '/mnt/data/oradata/pmi/acctdb_index_56.dbf';
set newname for datafile 57 to '/mnt/data/oradata/pmi/pivot_data_57.dbf';
set newname for datafile 58 to '/mnt/data/oradata/pmi/pmiaudit_data_58.dbf';
set newname for datafile 59 to '/mnt/data/oradata/pmi/pmiaudit_indx_59.dbf';
allocate channel D1 device type disk;
restore database;
switch datafile all;
release channel D1;
When I run this I get the following:
creating datafile fno=3 name=/mnt/data/oradata/pmi/sysaux_3.dbf
released channel: D1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/09/2009 09:32:33
ORA-01119: error in creating database file '+PMI2'
ORA-17502: ksfdcre:4 Failed to create file +PMI2
ORA-15001: diskgroup "PMI2" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
I noticed that it's trying to create the datafile. Shouldn't it be giving me a "Restoring datafiles from backup piece" clause? Also it appears to be trying to recreate the datafiles in their old location. Any thoughts on how to get around this.
Using the db_file_name_convert does allow me to restore files to the filesystem, but they use names such as "omf_*" and I'm not sure if it's converting the files properly from ASM format.
Thanks!

Hi,
I assume your problem is either in your pfile ( but you indicate you have removed all RAC settings), or in your control file.
I would recommend to remove the control files and create them later as soon as the datafiles have been restored, using the commands:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "OMST01" NORESETLOGS FORCE LOGGING NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 100
MAXLOGMEMBERS 2
MAXDATAFILES 1024
MAXINSTANCES 8
MAXLOGHISTORY 10210
LOGFILE
< your logfiles >
DATAFILE
< your datafiles >
CHARACTER SET <your character set>;So the steps are
Startup nomount with the pfile
Restore the datafiles using rman
Shutdown the database
Use above script to create the control files
It is possible you need to use the RESETLOGS option instead of the NORESETLOGS
HTH

Whats the BEST Deployment Practice for appsTier (2 Node) with RAC Database

Hi All,
Whats the BEST Deployment Practice for appsTier on Shared APPL_TOP between two application tier Nodes and a RAC Database.
Regards
Satish

Satish,
Could you elaborate; are you looking for how to distribute the tiers(forms, web, conc., etc.); are you asking about PCP (parallelt concurrent processing)..
Regards,

Single node to RAC migration

Hello friends ,
I am using RAC 11g(11.1.0.7)I having below configurations
NODE1
Clusterware oracle home /u01/Oracle_home1
ASM oracle home /u02/Oracle_home2
RAC oracle home /u03/Oracle_home3
NODE2
Clusterware oracle home /u01/Oracle_home1
ASM oracle home /u02/Oracle_home2
RAC oracle home /u03/Oracle_home3
Now I have one another database(NON RACed & NON ASM) with SID TEST which on local disk with flat file system on NODE1 only i.e /p01/Oracle_home4
My question is using RMAN can I restore rman backup piece or active database duplication of this local database to RAC system defined above.
Regards
Saransh Soni

Clone the single instance database from FileSystem to ASM using RMAN. At this point it is still single instance.
Unfortunately, the documentation convers FileSystem to ASM on the same server.
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmasmmi.htm#CHDCDCFJ
So, see the DUPLICATION Example "Example 23-6 Duplicating from a File System to ASM (Active)"
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#BGBEHADD
Then convert to RAC
http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/adddelunix.htm#CEGJFBJA
Hemant K Chitale

Error starting listener on single node in RAC..Error listening on: (DESCRIP

LSNRCTL> start LISTENER_CORPNG04
Starting /ora00/app/oracle/product/11/db1/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 11.1.0.7.0 - Production
System parameter file is /ora00/app/oracle/product/11/db1/network/admin/listener.ora
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vir_corpng04)(PORT=1521)(IP=FIRST)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
HPUX Error: 227: Can't assign requested address
Listener failed to start. See the error message(s) above...
LSNRCTL>
Plz help its production system
Thanks in Advance
Gagan

Hello,s
First of all, check the status of all resources by using crs_stat -t
Check if your VIP resource is indeed up and running on the node where you want to start the listener. As listener is depending upon this VIP address, it is needed to be up on the node where listener is configured. If this is the case then relocate the vip back to the system by using either of the following commands
1. crs_relocate <vip_resource_name>
OR
2. srvctl start nodeapps -n <hostname>
listener should be automatically up once crs relocates back the vip to the system.
If vip is already running fine on the system then check for your listener configuration as you check in normal systems.
Lalit Verma
[http://sites.google.com/site/racinsights1]

Error in Concurrent Program Details Report - XML Publisher program

hi,
i m executing a Concurrent Program Details Report - XML Publisher program and i m getting following errors
Error:
Beginning post-processing of request 4365650 on node APPS1 at 01-DEC-2010 08:04:00.
Post-processing of request 4365650 failed at 01-DEC-2010 08:04:04 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Can u specify where exactly the problem is the OPP log file shows:
11/25/10 5:08:20 AM] [main] Starting GSF service with concurrent process id = 1272712.
[11/25/10 5:08:20 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/25/10 5:08:20 AM] [Thread-18] Service thread starting up.
[11/25/10 5:08:20 AM] [Thread-19] Service thread starting up.
[11/25/10 1:00:02 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[11/26/10 12:01:08 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/26/10 1:00:33 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[11/27/10 12:01:48 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/27/10 1:01:11 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[11/28/10 12:00:18 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/28/10 1:01:39 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[11/29/10 12:00:48 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/29/10 1:00:20 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[11/30/10 12:01:51 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[11/30/10 1:01:00 PM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=4
[12/1/10 12:00:20 AM] [GSMServiceController:1272712] New Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=6
[12/1/10 8:04:02 AM] [OPPServiceThread1] Post-processing request 4365650.
[12/1/10 8:04:03 AM] [1272712:RT4365650] Executing post-processing actions for request 4365650.
[12/1/10 8:04:03 AM] [1272712:RT4365650] Starting XML Publisher post-processing action.
[12/1/10 8:04:03 AM] [1272712:RT4365650]
Template code: FNDCPPGD_XML
Template app: FND
Language: en
Territory: US
Output type: PDF
[12/1/10 8:04:04 AM] [UNEXPECTED] [1272712:RT4365650] java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA,DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ))
     at oracle.apps.xdo.oa.schema.server.TemplateInputStream.initStream(TemplateInputStream.java:402)
     at oracle.apps.xdo.oa.schema.server.TemplateInputStream.<init>(TemplateInputStream.java:235)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.getTemplateFile(TemplateHelper.java:1159)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3430)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:166)
[12/1/10 8:04:04 AM] [1272712:RT4365650] Completed post-processing actions for request 4365650.
[GC 6798K->4234K(9108K), 0.0020110 secs]
[GC 6858K->4321K(9108K), 0.0399700 secs]
[GC 6945K->4256K(9108K), 0.0021440 secs]
[GC 6880K->4272K(9108K), 0.0021000 secs]
[GC 6896K->4232K(9108K), 0.0020110 secs]
[GC 6856K->4316K(9108K), 0.0020590 secs]
[GC 6940K->4408K(9108K), 0.0597480 secs]
[GC 7032K->4495K(9108K), 0.0034290 secs]
[GC 7119K->4581K(9108K), 0.0031930 secs]
[GC 7205K->4667K(9108K), 0.0027380 secs]
[GC 7291K->4753K(9108K), 0.0028380 secs]
[GC 7377K->4840K(9108K), 0.0030960 secs]
[GC 7464K->4926K(9108K), 0.0026830 secs]
[GC 7550K->5011K(9108K), 0.7886420 secs]
[GC 7635K->5099K(9108K), 0.0029910 secs]
[GC 7723K->5183K(9108K), 0.0650420 secs]
[GC 7807K->5287K(9108K), 0.0137250 secs]
[GC 7911K->5375K(9108K), 0.0028940 secs]
[GC 7999K->5461K(9108K), 0.0121010 secs]
[GC 8085K->5544K(9108K), 0.0025770 secs]
[GC 8168K->5634K(9108K), 0.0035770 secs]
[GC 8258K->5723K(9108K), 0.0134410 secs]
[GC 8347K->5810K(9108K), 0.0028090 secs]
[GC 8434K->5891K(9108K), 0.0029380 secs]
[GC 8515K->5981K(9108K), 0.0029140 secs]
[GC 8605K->6069K(9108K), 0.0027600 secs]
[GC 8693K->6154K(9108K), 0.1243500 secs]
[GC 8778K->6241K(9108K), 0.0039650 secs]
[GC 8865K->6326K(9108K), 0.0028650 secs]
[GC 8950K->6413K(9236K), 0.0039710 secs]
[Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor6]
6413K->5352K(9236K), 1.1909030 secs]
[GC 8936K->5472K(12956K), 0.0023870 secs]
[GC 9056K->5591K(12956K), 0.0033830 secs]
[GC 9175K->5729K(12956K), 0.0042040 secs]
[GC 9313K->5849K(12956K), 0.0034840 secs]
[GC 9433K->5961K(12956K), 0.0100990 secs]
[GC 9545K->6086K(12956K), 0.0030080 secs]
[GC 9670K->6201K(12956K), 0.0031240 secs]
[GC 9785K->6319K(12956K), 0.0032300 secs]
[GC 9903K->6440K(12956K), 0.0034340 secs]
[GC 10024K->6559K(12956K), 0.0034880 secs]
[GC 10143K->6672K(12956K), 0.0035840 secs]
[GC 10256K->6798K(12956K), 0.0057700 secs]
[GC 10382K->6910K(12956K), 0.0060400 secs]
[GC 10494K->7033K(12956K), 0.0100290 secs]
[GC 10617K->7155K(12956K), 0.0071060 secs]
[GC 10739K->6968K(12956K), 0.0096190 secs]
[GC 10551K->7022K(12956K), 0.0018430 secs]
[GC 10606K->7024K(12956K), 0.0019950 secs]
[GC 10608K->7020K(12956K), 0.0019460 secs]
[GC 10604K->7024K(12956K), 0.0021440 secs]
[GC 10607K->7011K(12956K), 0.0018930 secs]
[GC 10595K->7048K(12956K), 0.0027050 secs]
[GC 10632K->7174K(12956K), 0.0028100 secs]
[GC 10758K->7059K(12956K), 0.0015890 secs]
[GC 10643K->7070K(12956K), 0.0032490 secs]
[GC 10654K->7192K(12956K), 0.0332620 secs]
[GC 10776K->7313K(12956K), 0.0035480 secs]
[GC 10897K->7437K(12956K), 0.0042360 secs]
[GC 11021K->7555K(12956K), 0.0158540 secs]
[GC 11139K->7679K(12956K), 0.0036930 secs]
[GC 11263K->7800K(12956K), 0.0035670 secs]
[GC 11384K->7919K(12956K), 0.0036300 secs]
[GC 11503K->8043K(12956K), 0.0039190 secs]
[GC 11627K->8164K(12956K), 0.0036210 secs]
[GC 11748K->8284K(12956K), 0.0034810 secs]
[GC 11868K->8405K(12956K), 0.0224470 secs]
[GC 11989K->8538K(12956K), 0.1723720 secs]
[GC 12122K->8661K(12956K), 0.0036210 secs]
[GC 12245K->8782K(12956K), 0.0101020 secs]
[GC 12366K->8903K(12956K), 0.0036410 secs]
[GC 12487K->9031K(12956K), 0.0037570 secs]
[GC 12615K->9152K(12956K), 0.1185410 secs]
[GC 12736K->9273K(13084K), 0.0037680 secs]
[Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor16]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor18]
9273K->6003K(13084K), 0.2840530 secs]
[GC 10163K->6154K(14616K), 0.0024850 secs]
[GC 10314K->6296K(14616K), 0.1144950 secs]
[GC 10456K->6436K(14616K), 0.0194160 secs]
[GC 10596K->6261K(14616K), 0.0069170 secs]
[GC 10421K->6264K(14616K), 0.0014630 secs]
[GC 10424K->6344K(14616K), 0.0027370 secs]
[GC 10504K->6481K(14616K), 0.0034770 secs]
[GC 10641K->6620K(14616K), 0.0282380 secs]
[GC 10780K->6758K(14616K), 0.0027550 secs]
[GC 10918K->6901K(14616K), 0.0026610 secs]
[GC 11061K->7042K(14616K), 0.0033920 secs]
[GC 11202K->7183K(14616K), 0.1176190 secs]
[GC 11343K->7328K(14616K), 0.0026570 secs]
[GC 11488K->7468K(14616K), 0.0037760 secs]
[GC 11628K->7602K(14616K), 0.0030830 secs]
[GC 11762K->7747K(14616K), 0.0037920 secs]
[GC 11907K->7880K(14616K), 0.0039450 secs]
[GC 12040K->8029K(14616K), 0.0037420 secs]
[GC 12189K->8168K(14616K), 0.0059800 secs]
[GC 12328K->8308K(14616K), 0.0040210 secs]
[GC 12468K->8447K(14616K), 0.0141800 secs]
[GC 12607K->8588K(14616K), 0.0040530 secs]
[GC 12748K->8731K(14616K), 0.0927280 secs]
[GC 12891K->8869K(14616K), 0.0039840 secs]
[GC 13029K->8761K(14616K), 0.0167970 secs]
[GC 12921K->8655K(14616K), 0.0013430 secs]
[GC 12815K->8692K(14616K), 0.0027280 secs]
[GC 12852K->8697K(14616K), 0.0022180 secs]
[GC 12857K->8698K(14616K), 0.0018800 secs]
[GC 12858K->8844K(14616K), 0.0030390 secs]
[GC 13004K->8703K(14616K), 0.0020500 secs]
[GC 12863K->8775K(14616K), 0.0022840 secs]
[GC 12935K->8762K(14616K), 0.0021550 secs]
[GC 12922K->8897K(14616K), 0.0029530 secs]
[GC 13057K->9028K(14616K), 0.0321850 secs]
[GC 13188K->9175K(14616K), 0.0037260 secs]
[GC 13335K->9307K(14616K), 0.0197840 secs]
[GC 13467K->9436K(14616K), 0.0037780 secs]
[GC 13596K->9565K(14616K), 0.0254750 secs]
[GC 13725K->9691K(14616K), 0.0032600 secs]
[GC 13851K->9828K(14616K), 0.0034450 secs]
[GC 13988K->9966K(14616K), 0.0038190 secs]
[GC 14126K->10107K(14616K), 0.0039240 secs]
[GC 14267K->10247K(14616K), 0.1258140 secs]
[GC 14407K->10387K(14744K), 0.0040400 secs]
[Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor19]
10387K->5407K(14744K), 1.3601020 secs]
[GC 9567K->5549K(14616K), 0.0024490 secs]
[GC 9709K->5695K(14616K), 0.0159350 secs]

Pl post details of OS, database and EBS versions. The error is here
>
[12/1/10 8:04:04 AM] [UNEXPECTED] [1272712:RT4365650] java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA ...
>
Pl see if the solution in MOS Doc 367456.1 (Why Does the 'Concurrent Program Details Report - XML Publisher' Fail with 'No corresponding LOB dat) is applicable. Other possibly relevant MOS Docs are
XML Report Preview : Java.Sql.Sqlexception: No Corresponding Lob Data Found          (Doc ID 418374.1)
Getting ''No Corresponding Lob Data Found'' Error From XDOREPPB 'XML Report Publisher'          (Doc ID 399349.1)
Publish Fsg Report fails with "java.sql.SQLException: No corresponding LOB data found"          (Doc ID 420528.1)
The Canadian RL1 Electronic Interface is Ending in Error: 'java.sql.SQLException: No corresponding L          (Doc ID 1068986.1)
AR Customer Balance Statement Letter /Statements Output is in XMLand not in PDF          (Doc ID 975501.1)
"An error encountered either due to invalid Template details or due to null Data Input Stream" While          (Doc ID 1068524.1)
XML Publisher Invoice Print Report Has No Output Generated          (Doc ID 427314.1)
HTH
Srini

Creating DR standby from RAC to single NODE

OS and Database versions Primary:
node1:- OEL 5.7
node2:- OEL 5.7
inst1:- prod1 Oracle 11.2.0.3
inst2:- prod2 Oracle 11.2.0.3
Standby:
OEL 5.7
Oracle 11.2.0.3
NOTE:- Creating Standby on Single node.
My scenario:
============
node1:- linuxdb1
node2:- linuxdb2
inst1:- prod1
inst2:- prod2
Point1:- We have 2 node RAC with ASM disk and database is okay. Now i want to make DR on single node with ASM disk created already.
Point2:- grid and oracle users are on RAC prod database & also same grid and oracle users on SINGLE node DR
Point3:- Took RMAN backup from prod database ( 2 node RAC ) and copied to DR as shown below:
RMAN>backup device type disk format '/u02/stby/%U' database plus archivelog;
RMAN>backup device type disk format '/u02/stby/%U' current controlfile for standby;
scp -rp /u02/stby/* [email protected]:/u02/stby/
Point4:- Now when i run below command on DR ( oracle@linuxdr2 )
[oracle@linuxdr2 stby]$ rman target sys/pwd@prod1 auxiliary /
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Mar 10 13:18:20 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD (DBID=220323208)
connected to auxiliary database: PROD (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 10-MAR-13
using target database control file instead of recovery catalog
configuration for DISK channel 2 is ignored
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=1142 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 10-MAR-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u02/stby/33o464m6_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred
Can you please help me to resolve the issue.
Thanks,
Vikhar

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred Any errors in alert log file?
Have you tried once again ?
Why cant you go for RMAN duplicate from active database, If you have any concerns then enable trace of RMAN and share the information
rman target / log=/u01/test/rman_log.txt trace=/u01/test/rmantrace.log

R12 with RAC - Failover

Hi,
Is it possible to have r12 Single Application tier with two node RAC database tier ?
Suppose if i have a 2 node rac and Node1 goes down, which of the following application services can fail over ( or say connect ) to second node.
1. self service application
2. Forms applicaton ?
3. CM
Can this happend dynamically or do i need to restart the application services ?
Is it manadatory to have multiple applications node if we have RAC at the backend ?

Hi,
You can implement RAC with single application tier node.
It is not mandatory to have multiple application nodes with RAC, but it is recommended (in terms of performance and availability).
I believe all your questions are answered in the following document.
Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
Regards,
Hussein

Single concurrent program for multiple operating units

HI
I am working on XML/BI publisher to generate AR invoice reports.
We have single rdf report using which rtf templates are generated.
There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
Eg: ORG_ID's = 11, 12, 13, 14..........etc
Eg: Responsibility = xx, yy, zz...........etc
I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
How can i register one concurrent program for multiple operating units.
Thanks!
Edited by: 994628 on Mar 18, 2013 4:39 PM
Edited by: 994628 on Mar 18, 2013 4:42 PM

>
There are 10 operating units (10 ORG_ID's) and 10 rtf templates, one for each operating unit. There are 4 different responsibilities for each ORG_ID
Eg: ORG_ID's = 11, 12, 13, 14..........etc
Eg: Responsibility = xx, yy, zz...........etc
I want to register a single concurrent program. When a user submits a request from "XX" responsibility, then the template associated with that org_id should be generated. Whichever responsibility the user is accessing from, that particular template must be shown as output.
>
interesting case for 10 OE set 10 template
what is purpose? for each OE different requirements for layout?
BTW
if each Responsibility associated with one org_id then
- you can get current org_id when you run concurrent program
- create main template (will be #11) with condition like
<?choose:?>
<?when: ORG_ID=11?>
<?import:xdo://FND.XX11_SUB.en.00/?>
<?call:TEMPLATE11?>
<?end when?>
<?when: ORG_ID=12?>
<?import:xdo://FND.XX12_SUB.en.00/?>
<?call:TEMPLATE12?>
<?end when?>
<?otherwise:?>
<?import:xdo://FND.XX21_SUB.en.00/?>
<?call:TEMPLATE21?>
<?end otherwise?>
<?end choose?>so based on org_id will be import of needed subtemplate
- re-register your "10 rtf templates" as subtemplates
another way is substitution of template for concurrent then it running
in before_report trigger set needed template
l_conc_request_id := fnd_global.conc_request_id;
    if ORG_ID = 11 then
      UPDATE fnd_conc_pp_actions t
         SET t.argument2 = 'XX11'
       where t.concurrent_request_id = l_conc_request_id
         and t.action_type = 6;
if ORG_ID = 21 then
      UPDATE fnd_conc_pp_actions t
         SET t.argument2 = 'XX21'
       where t.concurrent_request_id = l_conc_request_id
         and t.action_type = 6;

Concurrent program required on a single node with RAC connfiguration

Similar Messages

Maybe you are looking for