Condition record not appearing in SO

Dear all,
I maintained the Condition record..but it is not commining into the sales order...but what i took the combination fields are appearing in sales order(i checked in Analysis tab).
Thanks in Advance
Regards
raj.

Hi,
If you are maintaining the same field combinations for both access sequences JLST&JCST, then change the field combinations as follows
Create a new condition table for a new access sequence for the combination of
Country/PlntRegion/Region/TaxCl2Cust/TaxCl.2Mat for CST.
and for VAT maintain the same 368 table with the acess seq of JLST. And create two condition records for JLST&JCST condition types.
In customer master if the customer is relevant for VAT(Local sales) then put appropriate indicator of JLST(maintain JCST indicator=0(Nil tax)) . Similarly if the customer is from some other state the put relevant tax indicator for JCST.(here, JLST=0(nil)
I hope u have maintained Material master tax indicators for both JCST&JLST.
Hope this will solve ur issue
Reg
JJ

Similar Messages

  • Discount condition type not appearing in sales order but in invoice

    Hi,
    I have two discount condition types (MPDI,ZSDI) in my pricing procedure,at the time of sales order creation one discount condition is not appearing.
    On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
    In the billing ,i could see the condition type appearing.I have checked this,but i could not understand why it is happening.Even the condition catergory of condition is empty not L.
    Also please find the screen shots below,
    Pradeep

    Pradeep,
    Am sure user might have deleted the condition type in sales order, the same condition type woudl have entered manually in invoice.
    Please check my testing, i have done the same entered ZA09 manually and after saving have deleted again in sales order, after dilivery and when i created invoice here i have entered manually the same condition type.
    So in your case also the same thing could have happend, check the change log and also in invoce condtion tab check the condtion type in analysis ( Invoice analysis not order). so that you can udnerstand whether it was entered manully or not.
    On analyzing the condition type MPDI,system throws message "Access not been executed due to previous access",what would be the reason.
    This is because in the condtion tyoe the abvoe key combiantion was found with records hence the below key combition was ignored. this you observe in your screen shot with with 5.00
    So my guess is the condtion records was deleted in sales order.
    thanks,
    srinu.

  • SD: Condition record not getting automatically determined

    Hi,
    Condition record not getting automatically determined for a condition type for which following access is maintained.
    The access has table containing following fields:
    Sales Organisation
    Distribution Channel
    Division
    Sales Document type
    Sales Document No.
    Material no.
    Following is the scenario:
    A sales order is created  for Project Systems attach a WBS element to the line item .
    With respect to the above created sales order a Billing request ( a sales doc. type which is different than the above sales order). When the billing request is created materials appearing in the line item will be different.Different materials will appear in the billing request because of the DIP profile maintained.
    The prerequisite is that before creating billing request the sales employee has to maintain condition master record with above access.The condition record will combine sales organisation, distribution channel, division, sales document type ,
    sales document number ( the 1st refered sales order)
    and the material are different
    than the ones maintained in the 1st sales order.
    This will enable in getting billing request generated without manual intervention in pricing for other materials for which condition records have been maintained as stated above.
    Following is the error message we get
    ===================================
    " Inactive        X   Inactive via formulae of incorrect "
    Thanks
    Aby
    Message was edited by: Aby Jacob Emmanuel

    As I know, thats just a warning message(if its a std one).
    Ignore it and save.
    Check your pricing date of the document. For execution it should be similar or after valid-from date maintain in condition record.
    But, you need not create a condition record. Simply change the existing one combination of your desire. But, this warning will come there also for your combination.
    Thanks & Regards
    JP

  • TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

    Welcome to the Apple Community.
    The following article(s) may help you.
    Photo Stream ToU's

  • Condition type not appearing in PO line item

    Dear All
    I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
    Cond. class   A Discount or surcharge
    Calculat.type A Percentage
    Cond.category B Delivery costs
    Manual entries      C Manual entry has priority
    Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
    Please let me know why system is behaving like this.
    Regards
    SK

    satish kumar wrote:
    In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
    Hi Satish,
    Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
    Anything pls revert
    Regards
    Shiva

  • Tax Conditions types not appearing in CRM orders and quotations

    Hello All,
    I have created a new tax condition type in ECC and through initial load replicate the same to CRM. pricing procedure repliction with new tax condition is also successful.
    But, the new tax condition is not appearing in condition tab at item level when i create quotation in CRM. other condition types are coming. data for this condition type is there in custom condition table. mapping of tax classifiction to tax group is also done in SPRO.
    Please advise.
    THank and Regards
    Sudhir Grover

    Hello Sudhir,
    You should check the trace log for pricing at first. Set the user parameter:PRC_TRACE as 'X' on T-cd:SU01 for your user and check the Access analysis on the condition tab.
    Regards,
    Masayuki

  • Condition record not found for service net price

    Hi Experts,
    I have seen other posts related to this topic but didnt solve my issue. Issue is: in one system when trying to create PO for requisition, it says please enter a price for service item since "condition record not found" (because package number is wrongly taken as '00000000'. i dont know why).
    In another system, again the condition record was not found but its taking some non-zero value for ESLL-NETWR and successfully creating PO.
    In both the systems, coding is the same. No extra coding in user-exists. I think package is not properly determined. But in tables ESLH/ESLL, i see the values are stored in exactly the same manner as in the other system. I literally see no difference.
    What could be the problem?

    Solved myself.
    The difference was in the purchase organization data. Depending on this field there was some check: 'Ignore requisition price in PO'. This was checked in one system for a purch org due to which it was not picking the price from PR data.

  • V/08 conditions do not appear..

    Dear friends,
    I have created condition types in V/06 SCREEN.. But in v/08 screen, in the pricing procedure these conditions do not appear..
    How can I fix this issue??
    Thansk

    I think you are syaing in V/08 when you do F4 you are not able to see the Z condition types. Yes you will not be able to see. You need to type in manually or look for it specifically in F4 search. Then it will come up.
    Hope this helps
    Regards
    Sai
    Edited by: Sai on Jul 1, 2010 9:59 AM

  • Condition record not pulled for all material

    Hi,
    I have three materials in sales order. now, for each material , I am maintaining some condition record in VK11. the problem i face is, if in case I don't maintain condition recrod for condtion ZCD1 for the first material A in sales order, the condtion records that I have maintain for the same condtion ZCD1 for the following materials are also not getting pulled. that's true for all conditiond in my pricing procedure. only those conditions for which system could find records for the first material, it pulls it for all other materials that follow material A in sales order. otherwise, system gives the messgae " condition record has been found but not set "
    what could be the reason? this is certainly not the standard behavior.
    Thanks,
    Binita

    I have checked this with creating new records for all material for all condtions. but, it is possible that a particular price condtion may not be maintained for the first material and which can very well be maintained for the folllowing materials. in that case, they are not pulled. the records are there for sure for other materials as 1) i could see them in VK13 and 2) the condition analysis tells me that condtion record is found but not set. no clue what it has got anything to do with first material..as soon as i maintain that condtion for first material (even zero value in Vk11), they start appearing for other materials as they are maintained.
    Thanks,
    Binita

  • Condition type not appearing in Pricing report

    Hello all,
    There are 2 condition types
    ZR00 - condclass B, calc type C, item condition, with acc seq Sales Area/Material and
    ZQA2 - condclass A, calc type C, item condition, with acc seq Sales Area/Customer/Material.
    I have maintained condition records for both & created a pricing report with field name Condition type for which position is Page Header of Pricing report.
    However when i fire this report condtype ZR00 appears but ZQA2 does not. Please advise.
    Thanks
    -Dinesh

    Hi Dinesh
    In the condition table , maintain the key combination of sales area/Customer grp /customer/material and then generate the report. Then you may  get the output  . But make sure you have maintained the customer group in CMR also.
    But it is better to reduce the key combination you have maintained , because there are many feilds which are involved, may be that could be the reason you were not getting output.
    Regards
    Srinath

  • Condition record not floe in po

    hi
    i copy key combination plant/material group to plant/material group/vendor combination.
    b'caz i use 16% for some vendor and 3% for other in fv11.
    but system is not pick condition record from plant/ma.group/vendor combination
    sugest
    sunil

    Hi
    You need to add the new condition table in the access sequence of the condition type for getting it trigerred.
    & Delete all the Condition records which were maintained earlier with old combinations if any.
    If the Check indictaor Exclusive is flagged then condition records of that Combination only will be picked up
    Award points if useful
    Thanks & Regards
    Kishore

  • Condition type not appearing in Sales order

    Hi All,
    Iam using TAXINN, Copied ZINFAC to KINFAC,
    I have created JIVP and JIVC for VAT and CST,
    I have maintained Condition Records for JIVP and JIVC.
    Both these condition records are not reflecting in my sales order, i.e. the records are not coming.
    Please help me in this regard
    Siva Narayana.B

    hi,
    please check if the condition records are mentioned for the key combination matching the sales order. ie if the condition records are maintained for the required combinations. Then check if the correct tax codes are maintained in the condition record and properly determined at FTXP.
    Thanks
    Sadhu Kishore

  • Condition records not copied from order to invoice

    Hi,
    I created an order and it has contion types for Frieght cost and packing cost...for both condition rocrds were found and triggered in order but whn cheked in invoice...records are not copied to invocie level..and when checked in analysis it says "access not made" for both the conditions...
    Fields combination for these are shipping point and material frieght group for both condition types...
    i checked the validity dates for both conditions and are still in validity dats.
    Can anyone advice me is there some thing else i need to check and why condition records are not copied to invoice.
    Thanks in advance
    Balu

    Hi Sumanth,
    Copy controls are fine...it is actually delivery related billing scenarios..and in delivery to billing copy contrls in header in determine export dat feild it is set to "B :Redetermine the export data" and at tiem level the pricing type is set to "C:Copy manual pricing elements and redetermine the others"
    Kindly let me know if the settings are fine or the problem is woth these settings
    Regards
    Balaji

  • Excise condition types not appearing in the Delivery document pricing

    Hi,
    This is a scenario of sales from an Exciseable Plant.
    The client has pricing requirement at delivery document.
    I have configured the pricing at Delivery document, but the Excise condition type (JEXP) does not appear.
    We are maintaine ED values at control code level and control code field is not availabe in LIPS, i tried adding the field in LIPS structure but still the ED condition type does not appear as program is not identifying the control code field in delivery.
    Can you please let me know the solution for bringing Excise condition type in the Delivery document pricing procedure.
    Regards
    Venkat

    Changed the Condition Category from 'F' to 'L'.

  • Condition record not determined in PO for Taxes

    HI All,
    I have maintained the necessary condition type in ZTAXIN (Copy of TAXINN) Procedure for Surcharge which is calculating on VAT 12.5% for Haryana State. System is not calculating for this condition type but system is calculating Taxes for other condition types.
    I have checked in FV12 also, records are exists. I have also checked in Tax condition type it is also showing the records for access.
    When i am checking analysis for Tax Procedure for Surcharge condition it is showing error as - "Condition record exists (Manually removed)".
    Kindly help me to resolve this issue.
    Thanks in advance.
    Sure points will be awarded.
    Regards,
    Neeraj Saini

    If u are using copy of TAXINN , u need to classify condition types. The condition type u r using for VAT shud be classified as combination of tax procedure and condition classification
    following is the path to the setting
    Logistics - General >>>>>Tax on Goods Movements>>>>>India>>>>>Basic Settings>>>>>>Determination of Excise Duty >>>>>>Condition-Based Excise Determination >>>>>>Classify Condition Types
    enter ur tax procedure .. vat condition type ... and vat tax classification.
    hope it help.
    regards
    Avinash

Maybe you are looking for

  • PO header Status tab details

    Hi All, in the purchase order header you find a tab status. This has values like Not Delivered, Partially Delivered and Full Delivered. I wonder how this status is set. Is it determined all the time you enter the transaction or is it stored in a data

  • Multiple characters in one slot of an ArrayList?

    I am writing a method that extracts words from a string and returns an ArrayList with the given extracted words. I am not allowed to use the method split. I have managed to get the characters of the input string into an array list, but I can't seem t

  • Configure DHCP to add non domain computers to DNS

    Hi We would like to add non domain computers automaticallly to DNS through our DHCP server. The reason is that we actally use Linux and our Linux admins would like the machines automatically to DNS when receiving a IP. I assumed that it was just a ma

  • Where to direct a general questions about foreign films subtitles?

    I recently purchased a foreign film "Break Ke Badd" from the iTunes store. Although, it didn't specify that it had English subtitles, I assumed it did. After the full download, I tried to watch it and there weren't any English subs. I contacted iTune

  • Adding custom tags and extend ParserDelegator and DTD support problem!!

    Hi all, I searched all forums and google for information about this problem but I did not find any clear solution or example. The probem stared when HTMLEditorKit's insertHTML method did not worked for custom tags. I extended javax.swing.text.html.pa