Conditional formating in result table

i am working on Endeca 3.1 version
How to do conditional formating in result table for string metric?
is there any way available to achieve this?

I have a different status value . Like Cancel,work in progress, Revision etc...
Have to highlight the each status in different colors.
is there any way available?

Similar Messages

Conditional Format in Pivot Table

Thanks in advance...
I created report like below in pivot table
_____Year 2009
______Period 3
Name Mark
Aju__ 100
Alex_ 75
Mick_ 80
Rabi_ 90
sam_ 80
from this report I need to highlight the entire row of 'Alex' and 'Sam' ...
but its work in 'Compound Layout'
How could I do this ?
Regards,
Selva

Hi Selva,
Conditional formatting is bit difficult for your requirement in Pivot table,because there some limitations in conditional formatting of pivot table.
You can select the entire Pivot table and apply the conditional formatting but..conditions will only format specific Cells .. and can not format entire row.. (for exmp. it will highlight only cell of alex. and not entire row of alex)
Hope this will help..
Thanks.

Is it possible to do conditional formatting in pivot table

I have created a duplicate layer of no of transactions which displays % of transactions.I need to highlight % above 50 in diff color.Is it possible in pivot table?

Hi,
Try this
In the criteria create one more column with formula as
100.0 * "Sales Facts"."Amount Sold" / REPORT_SUM("SH"."Sales Facts"."Amount Sold" BY ) ....this gives you the same result as percentage in Pivot table.
Replace Amount Sold by your measure column % of transactions.
Now set the conditional formatting in Criteria tab using this column. i.e if *100.0 * "Sales Facts"."Amount Sold" / REPORT_SUM("SH"."Sales Facts"."Amount Sold" BY ) > 50* then RED or whatever you want.
Hope this works.
Thanks

Possible to do conditional formatting in pivot table?

Hello,
I would like to do color row or column values based on certain conditions in my pivot table. I noticed the field tags in the pivot are not your standard <?value1?> but rather they are structured like <?./H?> or <?./M1?>
Is it possible to do this? As an example, if a row = '001' i want the entire row green, or if a single measure value in a cell = '0' i would like to color it red.

Check the blog http://blogs.oracle.com/xmlpublisher/2010/03/new_skool_crosstabbing.html for explanation on those fields and try to format them accordingly.

Cross Conditional format in Pivot Table

Hi Guys
I have an important client requirement where by I need to present the data in teh following format
CAMBODIA LAOS SRI LANKA
KPI_NAME PROPOSED_TARGET_VALUE MIN_TARGET_VALUE Aug-09 Sep-09 Oct-09 Aug-09 Sep-09 Oct-09 Aug-09 Sep-09 Oct-09
SERVICES PROVISIONING CALL RATE (%) <5% <5% 21.00% 68.00% 10.80% 1.300% 0.100% 1200.% 2.500% 5.000% 66.50%
The table is like that :
     Measure     Indicator
13     38     White
17     1016     Red Green
15     3456     White
19     8644     Grey
12     41605.886     White
10     52647.007     White
This is possible only through pivot table whereby country and period dimesions have been put in pivot.
Also there is a requirement to paint the background colour in Red Amber Green ... and for that I ahve to create a new column where after comparing i can put the status as Red ..Amber ..Green and based on the cross column conditional formating I can paint the fact value like 21.00% (shown above) .
But when I am importing that table in pivot view all the backgrounf colour vanishes. since cross column conditional formating is not supported in pivot.
Is there any way out to achieve this requirement .
Thanks

http://oraclebizint.wordpress.com/2008/04/29/oracle-bi-ee-101332-conditional-formatting-based-on-multiple-character-columns-in-a-pivot-table/

Above Average Conditional Formatting in Pivot Table off Row Total

I have a pivot table where the months are column labels and the actual issues are Row labels. This is inverted from a normal pivot table where the months are usually the row labels.
Basically I want the table to look at the value in the Values cells to look at the row Average instead of the column Average. Is there a way to do this?
I've highlighted all my Value cells (showing the sum of the issue for a specific month) and then applied the Above Average conditional formatting selecting 'All cells showing "Average of #of Tickets" values for "Issue" and "Month".
This works where the cells' value is greater than the columns average, but I want it to look at the row average instead.
Is this possible? I thought it be simple, but I can't figure it out. The table will grow every month width wise and possibly adding new issues each month.

Hi Vetsrini, thanks for the reply. I'm using the crosstab feature of BI Publisher template builder in MS Word to create the pivot table. I have a field called ACTIVITY as the row, and I want to bold the font and set the color as red if the ACTIVITY equals to certain text (such as if ACTIVITY = 'A' then bold & red). Can you please tell me how that can be achieved? I tried using the conditional formatting feature of the template builder, but it only works if I use it in a table, and not in pivot table.
Thanks a lot.

Conditional Format In Pivot Table Columns

Hi All
I am wondering if it is possible to accomplish conditional formatting in each column of a pivot table.
My table looks like
Jan/12 Feb/12 Mar/12
Bill 1.00 4.00 7.00
Bob 4.00 1.00 3.00
Charlie 5.00 1.00 2.00
What I am trying to do is highlight the max(value) in each column regardless of the other columns
So for Jan I want to format 5.00 / Feb 4.00 / Mar 7.00
I have tried playing around with Rank but cannot seem to get it working properly.
Does anybody know how this is possible?
Thanks in advance

Hi clueless,
Just an idea...have you already tried to create an extra object max like max(measure by period, person)...so you will obtain the max value for each combination period,person.
Afterwards you can use this object for your conditional report : when measure = max(measure) then 'red'.
give it a try and keep us informed.
Kr,
A

Conditional formating in Pivot Table

Hi All,
I have 3 columns Year, Month & Sales in my pivot table. I have applied conditional formatting to sales column as
if sales < 20 million Red
Sales > 30 million green
Sales between 20, 30 yellow
Now,
I have set the drilldown such that, when i drill down the year it drills down to prod categories --> products --> etc
when i have just year, month & sales everything looks good, but when i drill down to next level ie: product category, the conditional formatting is getting carried to the next level which i dont want to.
Is there any way to make sure that the conditional formatting does not carry forward or give a new set of conditions to the next level.
Thanks in Advance,
VNK

With Navigation, you can customize the report that the parent report goes to when a user clicks on a value (or column). Set your child report with all the columns you want and with whatever conditional formatting you want.
On the value you want the user to click on to go to this child report, click on the format properties (finger icon) and click on the Column tab. Set the Value Interaction to Navigation and point to the child report.
In the child report, on the same column (you need to have the same column in the child report), add an "Is Prompted" filter.
This will give you full control of the conditional formatting you desired and the "drill down" effect.

Conditional formatting in Pivot table

Hi,
I have a pivot table based on a Data Model.
For simplicity It has are four fields
1 for row, 1 for column, 1 for display data, 1 logical field.
I want to format data cell based on the logical field, but I don't want to display the logical field on Pivot table.
Could anyone give me a hint please
Thanks
Ponraj

Okay, I was hoping the easiest part of what I did would work for you. So now we "roll up our sleeves." What is the error message you get?
Something to remember: This only works on CHAR columns. If you have a calculated measure, you have to do it in the BMM layer, then bring the "string version" of the columns in the Presentation Layer.

Hiding values through conditional formatting (colour change)

Hi all,
OBIEE version is 10.1.3.4.0.
I have some reports where I'm supposed to hide some values as soon as they surpass a certain threshold. Hide, not filter that is. Conditional formatting being the obvious choice I wanted to simply set the colour to the background colour when the threshold is surpassed.
However, since all affected reports use alternating row highlighting, the background colour may change. I.e. it's not simply about colouring the values #FFFFFF
I can't use CSS style display:none by the way, since this actually shifts the following columns to the left
Without display:none
!http://lh4.ggpht.com/_kh3-h2s8BmA/So5ZmnvXnOI/AAAAAAAAAzk/aL9QznSGGF0/s800/0001_actual_values.jpg!
With display:none:
!http://lh6.ggpht.com/_kh3-h2s8BmA/So5ZsTj694I/AAAAAAAAAzo/0cYGr9dUe1I/s800/0002_values_with_display_none.jpg!
Any thoughts on this?
Cheers,
C.

We did achieve conditional formatting for pivot tables. This is the workaround. See if this helps.
Create a new column measure at the BMM layer (Lets call it 'M'). This is the measure based on which the conditional formatting on another measure has to be done. Add this column 'M' to the report columns in the pivot table.
Now, we get 2 measures. The report shows data for both these measures, side-by-side in the results. Now to use conditional formatting in the column that we just added-
Use the images (traffic signals, colored lines, colored arrows etc) provided by OBIEE in the 'Format' tab after applying the conditional formatting. OBIEE provides a choices to "Display Images only". Choose this option.
Now the report has 2 measure columns side-by-side with value and the image. We have to merge these columns for the visual effect. Use the column border property for both the measures. In the first mesure select the column border as 'C' and in the adjacent column select a mirror image of 'C' (mirror on right side of 'C'). This provides a visual effect that the two columns are one.
This concept can be use to hide values also.
Cheers,
A

Grand total conditional formatting

Hi gurus,
I have a problem with the grand total conditional formatting. The grand total is not conditionally format it as do the other elements of the pivot. I have read other posts on the forum and other sites on the advice of workaround to get the grand total formatted conditionally.
Like this:
http://www.clearpeaks.com/blog/oracle-bi-ee-11g/grand-total-conditional-formatting-in-pivot-tables
or
http://gerardnico.com/wiki/dat/obiee/answer_xml
But the answers is in error:
DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None
Error details
Codici di errore: YV3KVTDM
Location: saw.hypercube.dxeApi, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
I'm use the version obiee 11.1.1.6.2
Someone can give me some advice on how to conditionally format the grand total
Thanks in advance
Christian

Hello;
Im facing exactly the same issue. Did you find any workaround ?
Thanks in advance
niko

Can I set a conditional format as default in OBIEE 11g?

Hi,
I would like to set all positive number be (green) and negative number be (red) for all tables in Analytics Web (OBIEE 11g). Apart from create conditional format for every tables, is there any way to set once only and apply for all reports?

Hi User,
You can set system wide default by clicking on the button in conditional format tab.
*Make sure user has "Save System-Wide Column Formats" privilege to enable the option.
Regards,
Dpka

Dynamic table with conditional formatting

Hi.
I haven't used Dreamweaver in a few years and now need to
knockup a simple page for a project and need some help.
I want to create a dynamic link to a spreadsheet (.xls or
.csv) and then apply conditional formatting so that if a cell in
the table equals '1' then an image is displayed in that cell on the
webpage. If the cell equals '2' a different image is displayed, and
so on.
This way I can give a simple spreadsheet to the users to
update and by only entering a '1' or a '2' into each cell in the
spreasheet, they are changing images in a table on a webpage..
Is that possible and if so, can someone point me in the right
direction to create such functionality?
Many thanks.

You have convert that XLS file to CSV and then write your
PHP/PERL/ASP code to take the particular value and then that will
alter the image on condition.

Conditional formating in a pivot table field based on another field

Hello All,
I have a pivot table with fields like Division, Day, Current DayTotal, Previous DayTotal. I have to set the background color of CurrentDayTotal field based on PreviousDayTotal. I searched all the blogs and they say Crossconditional Formatting is not possible in 10.1.3.4 pivot table.
Conditional formatting works fine with the same field but not with a calculated field. I have tried these two options (Java Script and setting XML in Advanced tab) on a similar solution based on Grand Total.
Conditional formtting in Grand total
But not able to make it work for my current situation. Can you help.
Regards,
-Srini

Hi,
I've read all the tips that are offered in this forum. I tried all the solutions provided here, but I can not get the grand total formatted conditionally, what I get is the following error nell'answer:
DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None
Error details
Codici di errore: YV3KVTDM
Location: saw.hypercube.dxeApi, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
I'm use the version: OBIEE 11.1.1.6.2
Anyone have any ideas for me?!

Conditional formatting on total cells in pivot table

Hi, i have a pivot table with some values and percentages.
The percentages are in red if less then 0.
I have 1 row and 1 column of total values, but this cell aren't red if percentage is less then 0.
Does anybody know a solution for my problem?
Thanks

This is the example i create:
DIM A:
- Total A
- Value A
DIM B:
- Total B
- Value B
FACT:
- Value A (DIM A)
- Value B (DIM B)
- Actual
- LY
- Delta % (Calculated: 100*(Actual - LY)/LY)
Then i create the pivot table with B on rows (Σ on Total B), A on cols (Σ on Total A) and measures Actual, LY and Delta %. The last one has a conditional format on Delta % < 0.
This is the xml that i have:
<saw:report xmlns:saw="com.siebel.analytics.web/report/v1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlVersion="200705140" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sawx="com.siebel.analytics.web/expression/v1">
<saw:criteria subjectArea=""Test Conditional Formatting"">
<saw:columns>
<saw:column formula=""DIM A"."TOTAL A"" columnID="c0"/>
<saw:column formula=""DIM A"."VALUE A"" columnID="c1"/>
<saw:column formula=""DIM B"."TOTAL B"" columnID="c2"/>
<saw:column formula=""DIM B"."VALUE B"" columnID="c3"/>
<saw:column formula="FACT.ACTUAL" columnID="c5">
<saw:displayFormat suppress="default" interaction="default">
<saw:dataFormat xsi:type="saw:number" commas="true" negativeType="minus" minDigits="2" maxDigits="2"/></saw:displayFormat>
<saw:columnHeading>
<saw:displayFormat interaction="default"/></saw:columnHeading></saw:column>
<saw:column formula="FACT.LY" columnID="c6">
<saw:displayFormat suppress="default" interaction="default">
<saw:dataFormat xsi:type="saw:number" commas="true" negativeType="minus" minDigits="2" maxDigits="2"/></saw:displayFormat>
<saw:columnHeading>
<saw:displayFormat interaction="default"/></saw:columnHeading></saw:column>
<saw:column formula="FACT."Delta %"" columnID="c4">
<saw:displayFormat suppress="default" interaction="default">
<saw:dataFormat xsi:type="saw:percent" commas="false" negativeType="minus" minDigits="2" maxDigits="2"/>
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="less">
<saw:columnRef columnID="c4"/>
<sawx:expr xsi:type="xsd:decimal">0</sawx:expr></sawx:expr>
<saw:displayFormat fontColor="#FF0000"/></saw:condition></saw:displayFormat>
<saw:columnHeading>
<saw:displayFormat interaction="default"/></saw:columnHeading></saw:column></saw:columns></saw:criteria>
<saw:views currentView="0">
<saw:view xsi:type="saw:compoundView" name="compoundView!1" rptViewVers="200510010">
<saw:cvTable>
<saw:cvRow>
<saw:cvCell viewName="pivotTableView!1"/></saw:cvRow></saw:cvTable></saw:view>
<saw:view xsi:type="saw:titleView" name="titleView!1" rptViewVers="200510010"/>
<saw:view xsi:type="saw:tableView" name="tableView!1" rptViewVers="200510010" showHeading="false">
<saw:columns>
<saw:columnRef columnID="c1" total="true"/>
<saw:columnRef columnID="c2" total="true"/>
<saw:columnRef columnID="c0" total="true"/></saw:columns></saw:view>
<saw:view xsi:type="saw:pivotTableView" name="pivotTableView!1" rptViewVers="200510010">
<saw:edge axis="page"/>
<saw:edge axis="section"/>
<saw:edge axis="row">
<saw:edgeLayer type="column" columnID="c2" total="before">
<saw:displayFormat visibility="hidden"/></saw:edgeLayer>
<saw:edgeLayer type="column" columnID="c3"/></saw:edge>
<saw:edge axis="column">
<saw:edgeLayer type="column" columnID="c0" total="before">
<saw:displayFormat visibility="hidden"/></saw:edgeLayer>
<saw:edgeLayer type="column" columnID="c1"/>
<saw:edgeLayer type="labels"/></saw:edge>
<saw:edge axis="measure">
<saw:edgeLayer type="column" columnID="c5"/>
<saw:edgeLayer type="column" columnID="c6"/>
<saw:edgeLayer type="column" columnID="c4"/></saw:edge></saw:view></saw:views>
<saw:prompts/></saw:report>

Conditional formating in result table

Similar Messages

Maybe you are looking for