Conditional Loop Terminal and Autogrow

When changing a for loop terminal from indexing to conditional, the for loop and any containing structures expand even when they are not set to Auto Grow.
When selecting multiple conditional tunnels and and choosing Vertical Compress from the Distribute Objects menu, the tunnels are compressed as if they don't have condititonal terminals.
Are either of these bugs known or corrected in LabVIEW 2013? I could not find anything on NI.com when searching for "conditional tunnel autogrow".
Thanks,
Matt
Attachments:
Conditional Terminal Auto Grow bug.vi ‏6 KB

Matt,
A Very nice example of unexpected behaviour!
Steps to reproduce:
Open Matt's attachment in LabVIEW 2012 (12.0f3 Windows 32 on Win 7 64)
Right-click the loop and verify Autogrow is not checked
Right-click the top output tunnel and select Tunnel mode>>Conditional. Loop does not respect the autogrow setting!
Lasso both output tunnels and Ctrl+D (or optionally, click Distribute items>>Vertical Compress) Conditional glyphs are not respected in allignment
Select the "Top" tunnel and Ctrl+Shift+J (Move to back) What kind of tunnel is that now? I'd really hate to debug that one.
Really Really hate to debug that one! Run VI Analizer! No overlapping objects!
Sounds like a small oversight-- but a deadly potential for breaking code that is impossible to find without a divining rod!
BOLO (Be on the lookout) for this type of bug.
Jeff

Similar Messages

Conditional loops (while loops)

I am using a while loop to check a digital input. I would like to send the value to a true or false box to check another digital input. The problem is that the while loop is running continuously but not giving anything out through the connection. I am looking for something like "if this do that conditional". Is there a way to set this up?

Thanks for that suggestion. I have attached a picture of the loops as they are set up in the vi. I have taken out all of the extras to make matters simpler. The main problem is to connect loop number three to number one, so that whenever the value inside of the loop number three is true it is terminated and starts loop number one.
Attachments:
loops.bmp ‏470 KB

Delay/Timer only in a conditional loop.

Hello,
I want to use a delay(or some kind of timer) within my
program. I intend to use to it within a conditional loop. Specifically,
if a particular condition is true, then I want to wait for 50ms and
then check another condition, which if true, I want to stop my program.
I have used wait vi in the timing section. But this vi pauses my
whole program. Specifically, when the above mentioned condition is met,
I want the delay vi to execute along with my data acquistion vi. At
present, when the delay vi executes, everything (data acquisition, peak
detetction, plotting etc) in the program pauses. I guess its correct
functionality of wait vi but it does not suit my need.
Does someone have any alternate for pausing (delay/timer) a
particular condition loop without affecting the other parts of my
program? Specifically, only the conditional loop delays for a certain time while other features like data acquisition, peak
detetction, plotting etc excute normally.
Message Edited by Neuropotential on 02-22-2010 12:47 PM
Message Edited by Neuropotential on 02-22-2010 12:48 PM
Solved!
Go to Solution.

Yes. This is exactly what I was looking for. But, there is a issue. In practise, i will not be looking at 10 sec delay but a very small number like 50 ms. With this approach, when I set a value of 50ms, my program stops after close to 90-93ms (After 50ms, there is a AND gate, when true stops the program; Refer to the attachement).
There are multiple reasons which I see. First is obvious I am using a windows xp with lot of other stuff going on simutaneously. Also. elapsed time vi is an "express vi". Do you think this can be one of the primary reason for such a delay? Finally, I intend to use this program on RT based machine.
Do you see it working exactly as expected on those machines or do I have to modify my code? Please guide me.
Also, how to I mark your post as answer and other good things.
Thanks
Attachments:
Image.JPG ‏60 KB

GP - post condition loop block

Hi there,
I developed two web dynpro applications that implement the Callable object interface. Let's say they are called wdpA and wdpB.
wdpA has output parameter id with multiplicity (0..1)
wdpB has input parameter id with multiplicty (0...n = list)
Is it possible to do wdpA in a post condition loop block (execute it at least once) and after that block go to the next block that contains wdpB. In going from wdpA (possibly executed multiple times) to wdpB, i want to consolidate wdpA-output_id to and wdpB-input_id so that the id's that were generated in the loop can be processed in wdpB.
Kind regards,
J.

Hi Joren,
I don't think it's too difficult. You can find a description and an example here:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/82/0e6f4132f15b58e10000000a1550b0/frameset.htm">Implementing Callable Objects for Background Execution</a>
In any case you need some references/public parts to determined GP DCs, if you have a NWDI, than it should no problem to reference to them. If not, perhaps the following blog describes a good workaround:
<a href="/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development">Working with the APIs of CAF Guided Procedures: NWDI or Local Development?</a>
Regards,
Jan

Conditional Loop doesnt work correctly.

Hi There,
If you analyze my code, its all about parsing a dictionary.
Im checking the dictionary for the "aardvark" word. It gives me
false all the time. When "aardvark" is the first word in the array,
i.e my_dictionary[0] is "aardvark". I wonder why the conditional
loop isnt working fine. Im checking if the user string aardvark is
== my_dictionary
; it should be giving me the true value.
Is there any error in the code? Can anyone explain me where
im going wrong?
P.S -> The traces put everywhere gives me the right
output. Except for the result of the if().
Regards and thanks a lot in advance.
Roshan Kolar

Hi Raymond,
Thanks for the reply. I got the problem, actually the
conditional loop was perfect, the parsing was not. The reason
being, some words in the dictionary had a Space/NewLine/Carriage
Return at the last index after the word. It was all random, so some
words were taken, but some were not like "vicious" == "vicious " -
gave INVALID WORD.
So I redesigned the parser, where I removed the unwanted last
char - now the condition worked fine. Thank god I was working even
after posting the query.
Thanks a lot Raymond.
Regards,
Roshan

Phase calculation in conditional loop

I collect data from 2 channels on an Agilest oscilloscope (DSO-X-2004A) using the IVI Scope Acquire block. After acquiring those signals, I want to know the phase difference, which I calculate in the following manner: Tone Extraction CH1, Tone Extraction CH2, Formula (detect phase1 - detect phase 2).
I want to run this in a loop, and store the phase difference each loop. For that I have a conditional loop (set to 10 iterations for now), and after each phase difference calculation I save the new data point to a txt file. Is there another way of storing/saving the phase difference calculation from each loop, besides saving it to file?
The next problem I have is that after all the loops are finished, I want to look at the phase difference data and plot it vs iteration number. This is a problem because I get the error: "The selected file does not contains any Signals that could be imported" when trying to load the data at the end. I have the load ascii block outside the conditional loop that generates the data file, so I don't know why the load ascii is trying to excecute before the loop is done. I tried splitting everything into Sequence conditions with execution delays, but that hasn't worked either.
Is there a better way to save the calculation from each loop, or how do I appropriately load by text file after creating it in the same signal express project?
Thanks,
John Oxaal

Thanks for sending the the project. For now if you would like to easily integrate the setup that you have in SignalExpress into LabVIEW you can actually convert the project into LabVIEW code. As long as the LabVIEW version is as late or later than your SignalExpress version, you can do this. Please refer to document below on how to convert signal express project into a LabVIEW VI.
How Can I Generate a LabVIEW VI From My SignalExpress Project?:
http://digital.ni.com/public.nsf/allkb/96C01D2680084AAA86256F33007D98FA
Once you figure out how to take in your data in LabVIEW, you can start placing your data in the array that I mentioned from which you can process the data.
Cameron T
Applications Engineer
National Instruments

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Editing Loop Start and End times via automation / MIDI controllers?

I'm trying to play a sample in EXS24 and have the Sample Start, Loop Start and End times manipulated over the course of the song. I've tried to open up the EXS sample editor, click on the numerical value of the Loop Start, and then attempt to Learn Automation. All it does is assign the knob for the instrument Volume Level. Is there any way to do this? It's basically how an Akai S612 works: http://www.vintagesynth.com/akai/s612.shtml
I switched gears and tried it also with Battery, and there's a way to map the Start and End times in there, but it's not seeming to work as I've intended. I can't seem to make the loops move as they should and there's ways to use up to 4 loops, but not a way to target each loop's start and end points via separate controllers.
I could use my S-612 [and probably will], but in moments where I don't have one available, I'd love to find a solution to this.
Thanks,
+odd

Anyone with any thoughts? would be great to solve this.

HT1339 I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?

Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

I am trying to download Silverlight to use Netflix, however I just get a silverlight_developer.pkg that opens in Terminal and nothing happens.

I have Mac OS X Lion 10.7.2 and I'm having trouble downloading Silverlight to watch Netflix. I've tried several different ways from researching online. It just downloads a silverlight_developer.pkg and when I open it it opens in Terminal and says Silverlight_Developer.pkg-bash-80x24. I'm not a computer genius so I don't knwo what any of this means, but I knwo its not right. Please help!!

This answers the question for Lion users
https://discussions.apple.com/thread/3891253?start=0&tstart=0

Updated to Mavericks. Now theres tons of activity in my terminal and my activity monitor doesn't seem normal. I want to think someone's hacking me, but i need experienced help please!

I spent all night trying to fix this. It seems to me that someone has been trying to hack into my system with all of the random codes/lines in my terminal and i have all of his foreign IP addresses. And now i get this strange message that popped up in my terminal. Idk what it entirely means? I would very appreciate if someone could just walk me through this. Thank you very much.
First time poster. I have Macbook Pro. OSX. Just downloaded the new mavericks. I'm i have my firewall on. I stay secure. I run Netbarrier, Virusbarrier, IdentityScrubber.
I know something is a little odd or just doesn't make since about my activity monitor. Then my WiFi was hacked last night and this person was writing tons lines of commands/codes that i found in my terminal and my activity monitor doesn't look normal, and I've only been a mac owner for about a year now and i'm learning more and more but while trying to figure out what was going on this message popped up which concerned me the most. Any help would be most appreciated, thanks guys. I have my terminal full of his foreign ip addresses i noticed, and a lot of other commands and lines he wrote out that i definitely did not type myself. Can anyone give me a hand on this? Thanks
--- 192.168.1.103 ping statistics ---
10 packets transmitted, 0 packets received, 100.0% packet loss
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.1.103
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.1.103"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.1.103?showDetails=true&showARIN=false& ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail:
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Extol:~ FBI$
Extol:~ FBI$ hosts
-bash: hosts: command not found
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.0.0 - 192.168.255.255
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.0.0"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.0.0?showDetails=true&showARIN=false&ex t=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Whois Server Version 2.0
Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
No match for "-".
>>> Last update of whois database: Thu, 07 Nov 2013 13:19:14 UTC <<<
NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.
TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.
The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.255.255"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.255.255?showDetails=true&showARIN=fals e&ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
<Personal Information Edited by Host>

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Join condition between PO_REQUISITION_HEADERS_ALL and WF_NOTIFICATIONS

Hi,
Could anyone tell me what is the join condition between PO_REQUISITION_HEADERS_ALL and WF_NOTIFICATIONS?
I joined these two tables by WF_NOTIFICATIONS.ITEM_KEY = PO_REQUISITION_HEADERS_ALL .WF_ITEM_KEY.But I cannot found some approved requisitions item key in WF_NOTIFICATIONS table.
Please help.
I paste my query below:
SELECT PRH.ORG_ID ORG_ID,
WF.ITEM_KEY,
WF.FROM_ROLE,
PRH.WF_ITEM_KEY,
WF.RECIPIENT_ROLE APPROVERS_NAME,
TRUNC(NVL(PRH.APPROVED_DATE, '')) DATE_APPROVED,
WF.SUBJECT SUBJECT,
PRH.DESCRIPTION REQ_DESC,
PRH.SEGMENT1,
(SUM(NVL(PRL.AMOUNT, 0)) +
SUM(NVL(PRL.UNIT_PRICE, 0) * NVL(PRL.QUANTITY, 0))) REQ_AMT,
GL.SEGMENT1 || '.' || GL.SEGMENT2 || '.' || GL.SEGMENT3 || '.' ||
GL.SEGMENT4 || '.' || GL.SEGMENT5 || '.' || GL.SEGMENT6 || '.' ||
GL.SEGMENT7 || '.' || GL.SEGMENT8 CHARGE_ACCT
FROM APPS.WF_NOTIFICATIONS WF,
APPS.PO_REQUISITION_HEADERS_ALL PRH,
APPS.PO_REQUISITION_LINES_ALL PRL,
APPS.PO_REQ_DISTRIBUTIONS_ALL PRD,
APPS.GL_CODE_COMBINATIONS GL
WHERE WF.FROM_ROLE IN ('GHAWKINS', 'GHALVERSON', 'NCERNOTTA', 'DCOLLOPY', 'RHAY')
AND BEGIN_DATE > SYSDATE - 60
AND WF.MESSAGE_TYPE = 'REQAPPRV'
AND WF.ITEM_KEY = PRH.WF_ITEM_KEY --added
AND PRH.AUTHORIZATION_STATUS = 'APPROVED'
AND PRL.REQUISITION_HEADER_ID = PRH.REQUISITION_HEADER_ID
AND PRD.REQUISITION_LINE_ID = PRL.REQUISITION_LINE_ID
AND PRD.CODE_COMBINATION_ID = GL.CODE_COMBINATION_ID
GROUP BY PRH.ORG_ID,
WF.ITEM_KEY,
WF.FROM_ROLE,
PRH.WF_ITEM_KEY,
WF.BEGIN_DATE,
WF.SUBJECT,
WF.RECIPIENT_ROLE,
PRH.APPROVED_DATE,
PRH.DESCRIPTION,
PRH.SEGMENT1,
PRL.REQUISITION_HEADER_ID,
GL.SEGMENT1 || '.' || GL.SEGMENT2 || '.' || GL.SEGMENT3 || '.' ||
GL.SEGMENT4 || '.' || GL.SEGMENT5 || '.' || GL.SEGMENT6 || '.' ||
GL.SEGMENT7 || '.' || GL.SEGMENT8

Pl see if these MOS Docs can help -
603232.1 - How to Diagnose Purchasing Document Approval Routing
579522.1 - Forward Document Form FAQ
431767.1 - How To View Requisition From The Email Notifications For Which Workflow Data Is Purged
HTH
Srini

Is there a way on logic studio to laterally link songs for live settings. I never switched to ableton as my tracks are not as loop based and am trying to figure out a way to create a stream of linked songs without blowing out my cpu- maybe logic studio?

i think my question is in the header but i have this dream of taking a string of tracks(songs) and having them synched in a way that I can bring in a kick of one while my synth line from the last is still running- like spinning records but this sounds like a dream because that means two songs would have to be up at once and not only that but timed to be playing at once (all tracks connected to external controllers too) and the CPU would be crazy. This idea would be for the developers to figure out a way to create a system that allows the host song to fade out as the new one comes in in terms of power and their would have to be a new interface that would link the two. i am an electronic dance music producer and some songs are 8 minutes long with some of the tracks as composition piano styles that is hard to loop up and put inside a system like ableton to trigger and the accompanying string lines that are timed against the pianos so was just looking for a way to embed from track to track... any thoughts out there- i am now switching over to studio from pro for 4 years so maybe it's already done but for some reason - i think not. Hope my question is not too silly for the serious pro's out there.
Also, maybe logic should have an appendage platform to each individual track that has a pop and play interface to it that allows people to easily trigger and play each song live. Each song has a live version that has a brighter easier platform to see at night shows and it is still embedded within the original track-- then these appendage live songs can then be linked together. This appendage could be called LOGIC LIVE tracks.

I almost forgot that using folders can allow each folder to contain a song. I also recall touch tracks or one key play...

I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

How do I find the address of my usb ports so that I can connect a telescope to the macbook. I have tried various commands on terminal and all I get is 'directory or command not recognised'.

The telescope instruction says open a Terminal and put in ls/dev/* and other such things and all I get back is that none of them are recognised.
JeffersE

Why don't you call the telescope company for support and let them explain it to you. Usually there is software involved with those types of telescopes and if that software doesn't support Mac, it won't matter how or what USB port you plug it into because no drivers or anything will load for it.

Conditional Loop Terminal and Autogrow

Similar Messages

Maybe you are looking for