Conditional Printing when NE to 0

Post Author: LaVerne
CA Forum: Formula
Good Morning - I would like to suppress printing of records when (the Actual Volume = 0 and the Budgeted Volume = 0). Amounts in either of these field can be less than 0 in which case, I would like the row to print.
Thank you.

Post Author: V361
CA Forum: Formula
If you are suppressing a section, go to section expert, look for the X/1 formula next to the supress option. Click on the X/1 in the formula add ( Using the correct field names )
if = 0 and = 0 then true else false
If both actual_volume and Bugeted_Volume are 0, the formula will be true. When true, it will suppress the section. ( you can also suppress individual fields using this, if that is what you want)

Similar Messages

Print When with two conditions

I only want to print a page if two conditions are met. On each section I am using the following Print When Condition:
DateFormat(query.asofdate, "mm/dd/yyyy") NEQ DateFormat(calc.AmtDate, "mm/dd/yyyy") AND LSNumberFormat((query.bal + calc.anticipated), "_.__") LTE LSNumberFormat(25.00, "_.__").
The date check works great by itself and the amount check works great by itself but I can't get them to work together. Any ideas?
I am using CF10.

Cozmo2 wrote:
That fixed the problem Thanks!
Is there anyway I can apply this to the whole page and not have to add it to every sections 'Print When Condition'?
One way would be to exclude records that meet those conditions. That way you would not need to take them into account in your report.

My hp deskjet 1510 series does not print when connected to my hplap top (windows Vista),

My hp deskjet 1510 series does not print when connected to my hp lap top (windows Vista), it says the printer is not active, although it is default printer, connected and on. However, it does work when connected to the (also HP) lap top (windows 8) of my husband. I did everything the hp print and scan doctor advised and also what I could find at HP support (like switch of fire walls, reinstall everything, check printpooler ec etc)... it still does nothing except that I managed to print a diagnostic print which should give information about the condition, but it only gives numbers and letters like : 11. SN = [Edited for Personal Information] Yr 12 PER = 05YR etc, that does not really help me :-). It won't print any testpages. H E L P!!!

Hello Elisabeeth,
Welcome to the HP Forums!
I understand you're unable to print using the Deskjet 1510. I will do my best to assist you! When you reinstall the HP software, did the installation state it was complete?
I would start off by following this HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print. From this document, please make sure you check the connection type and the ports.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

HP Officejet Pro 8600 N911a - Print when Fax is Not Saved

Can I make it so a fax is printed when it's not saved? I know I can set it to print and save every time, but I rely on HP Digital Fax to save paper. If a fax is not saved, either due to a network error or if the computer that it usually saves to is shut off, can the fax just be printed?

, it's nice to meet you. I think I found something that may help with your faxing dilemma. This information was in the User Guide for the Officejet Pro 8600 e-All-in-One Printer - N911a; pg 69. Set up backup fax Depending on your preference and security requirements, you can set up the printer to store all the faxes it receives, only the faxes it receives while the printer is in an error condition, or none of the faxes it receives. The following backup fax modes are available:On > The default setting. When Backup fax is On, the printer stores all received faxes in memory. This enables you to reprint up to eight of the most recently printed faxes if they are still saved in memory. NOTE: When printer memory is low, it overwrites the oldest, printed faxes as it receives new faxes. If the memory becomes full of unprinted faxes, the printer stops answering incoming fax calls. NOTE: If you receive a fax that is too large, such as a very detailed color photo, it might not be stored in memory due to memory limitations.
On Error Only > Causes the printer to store faxes in memory only if an error condition exists that prevents the printer from printing the faxes (for example, if the printer runs out of paper). The printer continues to store incoming faxes as long as there is memory available. (If the memory becomes full, the printer stops answering incoming fax calls.) When the error condition is resolved, the faxes stored in memory print automatically, and then they are deleted from memory.
Off > Faxes are never stored in memory. For example, you might want to turn off Backup fax for security purposes. If an error condition occurs that prevents the printer from printing (for example, the printer runs out of paper), the printer stops answering incoming fax calls. NOTE: If backup fax is enabled and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might have received while the printer was in an error condition. You must contact the senders to ask them to resend any unprinted faxes. For a list of the faxes you have received, print the Fax Log. The Fax Log is not deleted when the printer is turned off. To set backup fax from the printer control panel 1. Touch (right arrow), and then select Setup.2. Touch Fax Setup, and then select Advanced Fax Setup.3. Touch Backup Fax Reception.4. Touch On, On Error Only, or Off. Reprint received faxes from memoryIf you set the Backup fax mode to On, the received faxes are stored in memory, whether the printer has an error condition or not. NOTE: After the memory becomes full, the oldest, printed faxes are overwritten as new faxes are received. If all the stored faxes are unprinted, the printer does not receive any fax calls until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes. Depending on the sizes of the faxes in memory, you can reprint up to eight of the most recently printed faxes, if they are still in memory. For example, you might need to reprint your faxes if you lost the copy of your last printout. To reprint faxes in memory from the printer control panel 1. Make sure you have paper loaded in the main tray.2. Touch (right arrow), and then select Setup.3. Touch Tools or Fax Tools, and then select Reprint Faxes in Memory. The faxes are printed in the reverse order from which they were received with the most recently received fax printed first, and so on.4. If you want to stop reprinting the faxes in memory, touch the Cancel button. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Unable to send report output to printer when using RUN_REPORT_OBJECT in 10g

Hello All,
When I try to send my report output to a file from my form(10g), I get 'FRM-41213: Unable to connect to report server'. I can sucessfully send my report to printer when I set the REPORT_DESTYPE to 'PRINTER'.Here is the code from my when-button-pressed trigger.
Am I missing something?
declare
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('PWRR_CTRL_TYP_MAINT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_ipkcaf7vm');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'DFLT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'C:\TEST1.doc');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
     rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
          msg_alert('Report print successfully', 'I', FALSE);
ELSE
     msg_alert('Error when running report', 'I', FALSE);
END IF;
END;
Thanks,
Anna

Hi,
its because
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'C:\TEST1.doc');
references the report rdf pr rep file to run, not the output file. The Reports output file is always specified with DESNAME
Frank

How can I print directly from my iPad to my new Primax 3260 printer when I have no computer. Do I need a portable single unit Router?

How can I print directly from my iPad to my new Primax 3260 printer when I have no computer? Do I need a portable one to one Router for the wiFi connection. My Internet is through Telstra 3G system.

Is your printer a wifi printer or hard wired only? If it's a wifi printer then you might want to look into third party apps like Print n Share or Print Central which allow a version of air printing to non-air print printers.
You may also want to look on the manufacturer's site. Maybe they have a fix for you.
If your printer isn't wifi, then you will need a router to get it on a wifi network to print to it. As far as I know, there is no support for the iPad to do wired printing.

How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

how do i fix my printer when it won't show the print preview for web pages? it worked for a while and now it doesn't. printer is an hp officejet 7310 all-in-one.

I would suspect this is a hardware issue. The rollers are probably having issues picking up the relatively smooth thick media. You might have better results be cleaning the paper pickup rollers with a damp paper towel. Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

Sorry to have repeated this question as if I were answering it. Just a mistake. I'm just now learning how to use this site.

My HP Color Laserjet CP1215 only prints when sending a command from a distant computer (shared pr.)

My HP Color Laserjet CP1215 won't print when I send a print command from the computer to which the printer is connected to. The printer is shared. When my colleague sends a print command from another computer, the printer does his job.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

HP PSC 2410 - can only print when document contains a color besides B & W..

Sorry, I got only crickets chirping on this over at "Tiger printing". Thought someone here might have insight w/ the user account "smoking gun" element. Background...
It has been frustrating since the update 10.4.7 "broke" my printing ease (it did, for whatever reason).
By accident, I finally discovered that if a text document from any program contains a color (if no color, B&W, it will not print --juts spits out blank pages) it will print when set to grayscale or color. So I have to convert any B & W documnt to a color and it will print (whether I set to gray scale or color --weird).
I created a new user account for a test, and it printed black text in "TextEdit" --okay, good, helps me narrow it down, right? So then I followed these instructions from another thread here:
"If a new user does not have the problem, then chances are it is a file in the user library. Reset the printing system, and go through and delete the com.apple.print... preference files and everything in the Printers folder. Reinstall the printer and see if that does it."
Tried it and it didn't work...
Weeks ago, I went through days and days w/ HP support through e-mail, as they would hand it off from one tech to another. Non officially they just sorta gave up on my case (I know I'm not the only one as my buddy has the same issue). I have installed their new driver, etc. I've been through many many steps of deleting this and that, but nothing worked. In all that time they never suggested the new user account. I was holding onto hope that 10.4.8. might help. Nope.
I'm hoping someone smarter than me will identify what I need to do next, a the above didn't help. Obviously the user account stuff is reavealing something in my account (a pref?) is not playing nice w/ the HP printer Thanks.
T i m

Didn't notice anything here on 10.4.8 intel with the latest drivers that it did not print some things, but did notice that when i print almost 100% cpu is used to do it.
Remove all stuff, Try installing latest 'drivers' again (see hp.com) and tell if it is still there.
If so: please tell what os, what mac.

HP 5510,windows 7, new setup of printer, "unable to communicate with printer" when i try to print

HP 5510, Windows 7, new printer, just picked it up!, "unable to communicate with printer" when I try to print a page, all network conections check out OK with Print Diagnostic Utility.

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Did you download & install the 10.5.8 driver?
http://www.hp4driver.com/2015/01/hp-officejet-7610-driver-download.html

HP Photosmart 7520 e-All-in-One Printer when trying to photocopy says incorrect paper size

HP Photosmart 7520 e-All-in-One Printer - WHEN i AM TRYING TO MAKE A COPY COPY OF AN A4 DOCUMENT WITH A4 PAPER INSTALLED. iT KEEPS PUTTING THROUGH A BLANK SHEET AND SAYING INCORRECT PAPER SIZE. HELP!!
I HAVE CHECKED FOR UPDATED SOFTWARE ETC, CLEANED THE GLASS, TURNED OFF AND ON ETC - NO LUCK.
Why is it such a major task just to photocopy one standard piece of A4 paper with just a letter contained no photos etc or anything too tasking.
Any help much appreciated

Hey there @SMFTEDDY ,
I saw your thread and messages and wanted to add to it. I have checked the Copy Menu on the printer itself (below), and it does not contain the option to copy in A4 size. You might just have to use the work around scanning method recommended above to get to use the A4 size you wish to use with the Photosmart 7520.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

BAPI_GOODSMVT_CREATE u2013 Collective slip not printed when called from Biztalk

Hi Experts,
Iu2019m trying to call BAPI_GOODSMVT_CREATE from within a Biztalk Orchestration.
Everything works fine except for one thing: The printing of the collective slip.
I made a quick test and the collective slip is printed when I call BAPI_GOODSMVT_CREATE from transaction SE37 (Test Sequences).
I have used exactly the same parameters for the two cases.
I can see that when I call the BAPI from SE37, an output is generated for the material document (MB03 / details / messages).
This is not the case when the call comes from Biztalk.
I followed the documentation and the notes 520813 (Question 12), 426554.
This means that:
- The user executing the BAPI has the parameter NDR set to u2018Xu2019 in his profile.
- VER_GR_GI_SLIP is set to u20183u2019 to ask for the collective slip print out.
- VER_GR_GI_SLIPX is set to u2018Xu2019 to enable the print out.
What should I do to be able to print a collective slip when calling the BAPI from Biztalk ?
Thank you in advance for your help,
Francisu2026

hi,
check out this thread.
Re: User Exit for MSC2n( Batch) while doing a Good receipt for an order
Ashutosh

Conditional Printing when NE to 0

Similar Messages

Maybe you are looking for