Conditional Report in Oracle Report Builder
Hi all,
I have a requirement like i have to build a conditional report. A parameter has to be passed for the report display. I have three different queries for the three parameters. If i select a parameter based on it, the report will be displayed.
I tried writing a pl/sql for the report display in BeforeReport function. How can i refer the query in the conditions.
function BeforeReport return boolean is
begin
if :p_report_run_by = 'Substance' then Q_1;
elsif :p_report_run_by = 'Lot Owner' then Q_2;
else Q_2;
end if;
return (TRUE);
end;
I have not touched reports in recent past. but i can give you an idea.
In the Report Layout, you can write a trigger on the frames which hold these 3 queries.
And based on the values retrieved from the parameter form, you can set the display ON?OFF for these frame.
Please mark the answer helpful/correct if it helps
Similar Messages
-
ORACLE reports Build 10g - Data Model - query - If statement in Alias ?
I have the following select statement. It has the alias Survivors, Deaths and "All
With the ORACLE reports Build 10g - Data Model - I have the following query statement. I require the alias to change. Can the following be done.
Cases". Is it posible to use :P_LANGUAGE variable to say that -- IF :P_LANGUAGE = FRENCH THEN alias are Survivants for survivors, Décès for Deaths, Tous_les_cas for All Cases. Please advise
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS Survivors,
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS Deaths, T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "All Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERSIt is no problem, you can automatically change the complete query before the report is running, which delivers you different kind of values. But the alias names does not change in the group of the data-model, although two query are running with different alias names at different times. In the data model you see the alias names of the first implemented select statement, which are the column fields in the layout.
-
How to pass a date parameter from report builder query designer to oracle database
i'm using report builder 3.0 connected to oracle database. i'm trying to pass a date parameter in the query with no success, i don't
know the exact syntax. I've tried :
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date('01/01/2014','mm/dd/yyyy')
it worked perfectly.
However if i try to put a date parameter "From" instead of 01/01/2014 it will not work, a Define Query Parameter popup window appear and error occurred after i fill
the values (usually i shouldnt get this popup i should enter the value when i run the report)
SELECT * FROM igeneral.GCL_CLAIMS where CREATED_BY IN (:CREATED_BY) AND CLAIM_YEAR IN(:UW_YEAR) AND (LOSS_DATE) >To_Date(:From,'mm/dd/yyyy')
appreciate your assistanceHi Gorgo,
According to your description, you have problem when in passing a parameter for running a Oracle Query. Right?
Based on my knowledge, it use "&" as synax for parameter in Oracle, like we use "@" in SQL Server. In this scenario, maybe you can try '01/01/2014' when inputing in "From". We are not sure if there's any limitation for To_Date()
function. For your self-testing, you can try the query in sqlplus/sql delveloper. Since your issue is related to Oracle query, we suggest you post this thread onto Oracle forum.
Best Regards,
Simon Hou -
Dear all;
Please pardon me. I am new to oracle report builder and I am trying to accomplish the following. First and foremost please find my pl/sql queries below. Kindly note, all the queries have been tested and I just need to be able to input those queries into the report builder. Thank you.
create or replace package test1 is
type r_cursor is ref cursor;
function report(company_name in varchar2) return r_cursor;
end test1;
create or replace package body test1 is
function report(company_name in varchar2) return r_cursor as
my_r_cursor r_cursor;
begin
if(company_name = 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t;
return my_r_cursor;
elsif(company_name != 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t
where t.t_id = company_name;
return my_r_cursor;
end if;
end;
end test1;
create table t1
t_id varchar2(200) not null,
t_description varchar2(250),
primary key(t_id)
insert into t1
(t_id, t_description)
values
('CITI', 'PROFIT: 2.2Billion');
insert into t1
(t_id, t_description)
values
('GE', 'PROFIT: 1Billion');
insert into t1
(t_id, t_description)
values
('JPMORGAN','PROFIT: 0');Now, I am trying to create a simple report in oracle report builder. The interface for generating for this report is basically, there is a dropdownlist where by the user picks a company name from the dropdownlist and clicks on the go button, this should then generate a report with the above query shown in the package. How can this be achieved? All help will greatly be appreciated.Hi,
first of all you need strong typed ref cursor, oracle reports need to detect witch are the columns returned by your cursor.
so first you create your package
create or replace package test1
as
TYPE t_record IS RECORD ( company_number PLS_INTEGER--TABLE_NAME.COLUMN_NAME%TYPE
, company_desc VARCHAR2(150)--TABLE_NAME.COLUMN_NAME%TYPE
TYPE T_REF_CURSOR IS REF CURSOR RETURN t_record;
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor) ;
end test1;
show errors
create or replace package body test1
is
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor)
is
my_r_cursor T_REF_CURSOR;
begin
if(company_name = '1')
THEN
open my_r_cursor for
select 1 as t_id, 'description' ast_description from dual
else
open my_r_cursor for
select 2 as t_id, 'description2' as t_description from dual
end if;
end;
end test1;
show errors
then, in your report you create a ref cursor query :
function QR_1RefCurDS
return test1.t_ref_cursor
is
C_return test1.t_ref_cursor;
begin
test1.report(1,C_return);
RETURN(C_return) ;
end;
hope this helps you !
E -
Getting a report in excel format from oracle report builder 10gDS release2
I want to get a report in excel format from oracle report builder 10gDS release2.
Is there ne method by which minimum effort is required for changing already made reports .
I have searched for it on internet :-
http://www.oracle.com/webapps/online-help/reports/10.1.2/state/content/navId.3/navSetId._/vtTopicFile.htmlhelp_rwbuild_hs%7Crwwhthow%7Cwhatare%7Coutput%7Coutput_a_simpleexcel~htm/
Example, given in the last of the page opened from the above url, is not working.
Can neone plz explain the example and how to use it
Thanks & Regards
JDOk, for the release 2 its quite straightfoward, in your calling form you would have something like this code:
declare
pl_id ParamList;
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
v_rep_status VARCHAR2(20);
v_repsrv VARCHAR2(100):= 'yourreportserver';
v_serv varchar2(50) := 'yourservername' ;
begin
pl_id := Get_Parameter_List('tmpdata');
if not id_null(pl_id) then
Destroy_Parameter_List( pl_id );
end if;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id,'DESTYPE' ,TEXT_PARAMETER,'Screen' );
Add_Parameter(pl_id,'PARAMFORM' ,TEXT_PARAMETER,'NO' );
repid := FIND_REPORT_OBJECT('yourreport'); SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER, v_repsrv);
set_report_object_property(repid,REPORT_DESTYPE,CACHE );
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
v_rep := RUN_REPORT_OBJECT(repid,pl_id);
v_rep := substr(v_rep,length(v_repsrv)+2,10 ) ;
end;
I have plenty of reports being formated to excel with this same method so it should work for you, the only diference with my previous code is this line.
set_report_object_property(repid,REPORT_DESFORMAT,'SPREADSHEET' );
The rest remains untouched.
Hope it helps. -
How to add a new font into Report Builder and Oracle Forms/Reports Server?
Hi,
I've searched the forum and can't find this being discussed.
My developers run Report Builder 10.1.2.0.2 on their XP laptops.
Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
This server runs on MS Windows 2003, SP2.
They've got a client who wants reports using the "Garamond Western" font.
So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
Thanks for your help.Thanks.
This answers 1/2 of my question.
The developer can now use Report Builder on his laptop, with the new fonts.
But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
I have then stopped and restarted the Forms-Reports Server. -
Interfacing of oracle report builder and java
hi all,
I have build a report using Oracle Report Builder 10g.Now i want to make use of this report in displaying the data in IE using core java.
This is the first time i am using the Oracle Report Builder .
Can anyone tell me how to proceed in right direction?Do i need to have some specific Jar,Environment to accomplish this task?
Thanks in advanceI'm not sure what version of the product you're using, but since you're just installing it may well be the base version (6.0.8.8.3).
Similar issues were addressed in a patch release (6.0.8.12), which was related to issues with some types of keyboard. You may want to upgrade to the latest patch release and retry. -
Help with Oracle Report Builder and SQL Server2000
Hey guys,
I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
Thank You
KeyHave a look at the reports help for the purpose header and trailer sections. Here is an exert:
"Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports." -
Using CLOBs in oracle Report Builder
I want to select all the data in a CLOB column using SQL Navigator by just doing
select entry_note
from chartentries;
just as you say in your example by it just gives me back a result of (ORACLOB).
If I do
select to_char(entry_note)
from chartentries;
I get this error.
If I do
select dbms_lob.substr(entry_note,4000,1)
from chartentries
I get this (there’s more up to 32000 characters in a clob) and these weird squares which I think are CR (carriage returns) or LF (line feeds). I don’t want to see those characters and I would like to retrieve the entire CLOB in one swoop without doing data manipulations of substringing.
Using the same data in Oracle Report Builder, I want to select all the data in a CLOB column into a field in a Paper report layout but I keep getting errors, ora-6502, and I've found out that I am restricted to 4000 characters and in Report 9i it looks like the largest field you can have is 4000 characters. My CLOB information can be up to 32000 characters long or longer and I do not want to substring out 4000 characters at a time into separate fields. In Crystal reports there is no problem just selecting the clob in a simple query and it is there in one shot. I would have thought by now that Oracle would have changed its development tools to be able to handle Clobs simply without any manipulation. Does anyone know how to do this in Report builder? I just have a simple query:
select entry_datetime,
to_char(replace((entry_note),chr(13))) as entry_note
from chartentries
where patient_id = 49741
Another thing I want to do, is call this Oracle report from a PL/SQL block passing several parameters to the report and also call a Crystal report from a PL/SQL block passing several parameters to the report. Does anyone know what the commands are?What I had to do is create a query using query builder. This works fine; it's when trying to add the column to an existing query is where the data inconstancy error occurs. One thing you have to keep in mind is it will only work using the query builder in conjunction with the report wizard; I am not sure why. To incorporate the comments into an existing frame you will have to cut the frame created by the wizards and copy it into the existing frame. Otherwise the column name will not show in the source list of the property Inspector.
Good Luck -
How to start Oracle Report Builder in Linux
Hi all
Can someone please help by telling how can i start Oracle Report Builder in Linux????
Thank you and best regards to allHello,
there should be a script rwbuilder.sh
in ORACLE_HOME/bin for 10.1.2.
in ORACLE_INSTANCE/config/reports/bin for 11g
Of course, you need to have a "X Display Server " up and running and the variable DISPLAY must be set to this "X Display Server "
Example :
export DISPLAY=123.456.789.12:0
$ORACLE_HOME/bin/rwbuilder.sh
Regards -
Exception while opening a JSP file created using oracle report builder
I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
I have deployed the JSP created above to the Oracle Application Server
but when i try to open the JSP file it gives the following error:
500 Internal Server Error
javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
can anybody help regarding this
this is of high priority to me
thanks and regards
Subhajitbump
-
Report Builder 3.0 Expression i am not able to make it work on Oracle DB Table
Hi,
I am newbie to SSRS Report Builder 3.0 so please be patient with me. I am trying to create a report to query Remedy Ticketing System and it uses Oracle Database installed on a Unix OS...My end objective is to do some calculation on the ticket metrics (i.e.
percentage of tickets closed within SLA, etc) however i am stuck from the very beginning where i am not able to make my expression work...
To begin with. my query statement...
Select Distinct TICKET_NUMBER, Assigned_Group, Category, REGION, TICKET_STATUS,EXCEEDED_SLA, TO_CHAR(date '1970-01-01' + (TICKET_CREATION_DATE/60/60/24), 'DD/MON/YYYY HH:MI:SS AM')TICKET_CREATION_DATE
from ARADMIN.Request
where (Assigned_Group like 'HOTS' OR Assigned_Group like 'PAID' OR Category like 'HVD%') and TICKET_CREATION_DATE > (TO_DATE('31/DEC/2014 11:59:59 PM','DD/MON/YYYY HH:MI:SS PM', 'NLS_DATE_LANGUAGE=AMERICAN') - DATE '1970-01-01')*60*60*24
order by ticket_creation_date
the data type of the oracle table:
Here is the Query Result of the DataSet:
Basically Ticket_Status has values from 0 to 4 although from the screenshot above you only see 2 and 4...
Ticket_Status 0 - Means Open Ticket
Ticket_Status 1 - Means Work In Progress Ticket
Ticket_Status 2 - Means Pending Ticket
Ticket_Status 3 - Means Awaiting Closure Ticket
Ticket_Status 4 - Means Closed Ticket
I created a chart column using the expression below but it did not work...what i mean by it does not work is that the chart column output shows all Ticket_Status total count including 0, 1, 2, 3, & 4 (i.e. total count of tickets are 206)...using
the expression i was only expecting the total count for Ticket_Status 4 (i.e. 180 tickets) but i guess i am doing something wrong with the expression syntax...
=Count(Fields!TICKET_STATUS.Value=4)
i also used the expression below but it did not work...
=Count(Fields!TICKET_STATUS.Value="4")
i converted the Ticket_Status to CHAR on the dataset using the TO_CHAR(Ticket_Status) AS Ticket_Status then i tried the expression below but did not work...
=Count(Fields!TICKET_STATUS.Value="4")
i tried again the expression below but did not work'
=Count(Fields!TICKET_STATUS.Value=4)
i cannot proceed to the arithmetic calculation if i cannot filter my dataset with the correct value...again i am a newbie with SSRS & report builder and i would appreciate it very much if you can guide/help me :-)Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Use css file in oracle 10g report builder
hi every one
i am using oracle 10g report buidler. i want control paramform by usign css file.
any body have idea how can i use css file in oracle report builder 10g and how can i modify it's path and i how can i manage any css class on a perticular field.Thanks Billy.
Yes you are right.
Here why I discarded that option is,
I may get the source files with changing layouts.
My Actual scenario is as follows.
Initially we developped all the things using PL/SQL packages. Its working fine.
But as per the inputs we received from requirements group, the file structure changes dynamically. and we would able to consider those new columns also. We should be able to changes the rules dynamically.
Lets say, we doing fullouter join on Src_A and Src_B. on columns col1_A and col1_B.
Now the requirement changes in a way that, the join should be done on Src_A and Src_C. on columns col1_A and col_C.
For this I need to define a new package.
Instead of that, I would like to do everything dynamically based on configuration parameters given as input.
Thank you,
Regards,
Gowtham Sen -
How to Publish a report created by Oracle report builder
Hi Everyone
My colleague and I were trying to use the Oracle Reports Builder to replace our existing reports generator from our ERP system. We have already created the report in the Reports Builder from the development suite.
What we are looking for is a similar solution as the Microsoft reporting service;
1) create the company report templates
2) and then upload the template files to a location (e.g. folder on the server)
3) then all user in the company can access it by a web browser with some fields which they can enter some critiria (e.g. purchase order number).
4) then send to printer and the print out should look exactly like the template.
Unfortunately, we had very bad time on try to find out what we need and how to publish that Oracle report we created. We spent 15 hours on that but no result.
In that 15 hours we tried to setup the "Oracle report service", but at last my colleague said that wasnt what we looking for, the "Oracle report service" is for reporting the error from the application hosted on the server, not for publish the company report created by the "Oracle report bulider" .
We use Oracle Database 10g for the ERP quite a long time already. We had the Oracle Developer Setup, and the Application Server Installed.
Could someone please tell us what kind of Oracle service we are actually looking for. Any other suggestion and setup guides are also the most welcoming.
Best Regards
BryanHello,
If you want to be able to execute your Reports on the web, the best solution is to use the "Oracle Application Server"
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
For example , the "Forms & Reports Services Standalone" edition
Then, use the Reports Servlet to submit the execution requests to a Reports Server :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_run.htm
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
13 Running Report Requests
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/howto/runprint/deploy_rpt.htm
Deploying a report
Regards -
How to use LIKE function with a parameter in Oracle REPORT builder??
how could i use parameter inside a LIKE function in Oracle reports builder?
it works in SQL plus, but not in report builder!!
Example:
select code,desc from item_master where desc
like '%&give_desc%'; ---works in SQL
like '%:give_desc%' ---doesn't work in report builder!!Hi Renil,
You will need to use the wildcard character (%) and the concatenation character (||) to join to your user parameter.
i.e. like '%'||:give_desc||'%'
Regards,
John
Maybe you are looking for
-
Public-facing on-premises SharePoint with NTLM authentication
I've been searching for authentication best practices for public-facing SharePoint site but I didn't find any useful resources on the issue that is troubling me. Assume I set up a web application with Classic NTLM authentication. On that web applicat
-
How do I move copies of all my emails to iCloud so I can delete them from the Mac and the iPhone to clear space but still access them? I have plenty of iCloud storage. In other words, I want to delete the mail from my iMac but still have it in iCloud
-
Binding 2 Models in the Same component controller
I'm using 2 Import Adaptive RFC Models. I want to bind both the models in the component controller of the same web dynpro component. But when I try to do model binding for the second model, it does not allow me to do so. If I try to bind the same mod
-
The iPad has a bruised hand, the screen freezes sometimes buy it 4 months ago and I wonder if I can change the other as it has warranty and I have to keep the receipt?
-
Permanently Widen Finder View Column Width
I am familiar with the method to get a full/wider view of a Finder column when I'm there, but the column width goes back to its original width when the Finder is closed. Any way that anyone knows to set and maintain a wide column view after closing F