Conditions in SQVI for amount depending upon the Debitcredit Indicator
Hello ABAP's
I am new to this forum & learning. I am using SQVI for getting Information from Table BSEG. The data is getting extracted but I am unable to give any conditions for amount depending upon the Debitcredit Indicator. If it is "H" ie. Credit the Amount should change colour and if it is "S" it should be as it is.Just like in tcode MB51 when we get negative amount the Line is dispalyed in Pink and in case of Positive in Green.
Looking forward to your help.
With regards
Sandy
Hi Sandesh,
You can not manipulate data in SQVI. For that you can write a query in infostructures transaction SQ01/02/03.
1. Go in SQ02, create an infoset and assign it to user-group available.
2. Inside infoset, declare table BSEG and click on button 'Extras'. here, you can write your code to multply by '-1' to a field depending upon some condition. Select 'Code' tab and code section as 'Record Processing'. Write code in window displayed.
3. In SQ01, select infoset you just created and select the query.
Execute the same and you will get required output.
Let me know if it helps.
Gouri.
Similar Messages
-
How to create some columns dynamically in the report designer depending upon the input selection
Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
ThanksHi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu -
Shading part of a JTable Cell dependent upon the value of the cell
Hi
Was hoping some one woudl be able to provide some help with this. I'm trying to create a renderer that will "shade" part of a JTable cell's background depending upon the value in the cell as a percentage (E.g. if the cell contains 0.25 then a quarter of the cell background will be shaded)
What I've got so far is a renderer which will draw a rectangle whose width is the relevant percentage of the cell's width. (i.e. the width of the column) based on something similar I found in the forum but the part I'm struggling with is getting it to draw this rectangle in any cell other than the first cell. I've tried using .getCellRect(...) to get the x and y position of the cell to draw the rectangle but I still can't make it work.
The code for my renderer as it stands is:
import java.awt.Component;
import java.awt.Graphics;
import java.awt.Graphics2D;
import javax.swing.JLabel;
import javax.swing.JTable;
import javax.swing.table.TableCellRenderer;
public class PercentageRepresentationRenderer extends JLabel implements TableCellRenderer{
double percentageValue;
double rectWidth;
double rectHeight;
JTable table;
int row;
int column;
int x;
int y;
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
if (value instanceof Number)
this.table = table;
this.row = row;
this.column = column;
Number numValue = (Number)value;
percentageValue = numValue.doubleValue();
rectHeight = table.getRowHeight(row);
rectWidth = percentageValue * table.getColumnModel().getColumn(column).getWidth();
return this;
public void paintComponent(Graphics g) {
x = table.getCellRect(row, column, false).x;
y = table.getCellRect(row, column, false).y;
setOpaque(false);
Graphics2D g2d = (Graphics2D)g;
g2d.fillRect(x,y, new Double(rectWidth).intValue(), new Double(rectHeight).intValue());
super.paintComponent(g);
}and the following code produces a runnable example:
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.table.DefaultTableModel;
public class PercentageTestTable extends JFrame {
public PercentageTestTable()
Object[] columnNames = new Object[]{"A","B"};
Object[][] tableData = new Object[][]{{0.25,0.5},{0.75,1.0}};
DefaultTableModel testModel = new DefaultTableModel(tableData,columnNames);
JTable test = new JTable(testModel);
test.setDefaultRenderer(Object.class, new PercentageRepresentationRenderer());
JScrollPane scroll = new JScrollPane();
scroll.getViewport().add(test);
add(scroll);
public static void main(String[] args)
PercentageTestTable testTable = new PercentageTestTable();
testTable.pack();
testTable.setVisible(true);
testTable.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}If anyone could help or point me in the right direction, I'd appreciate it.
RuanaeThis is an example I published some while ago -
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class Fred120 extends JPanel
static final Object[][] tableData =
{1, new Double(10.0)},
{2, new Double(20.0)},
{3, new Double(50.0)},
{4, new Double(10.0)},
{5, new Double(95.0)},
{6, new Double(60.0)},
static final Object[] headers =
"One",
"Two",
public Fred120() throws Exception
super(new BorderLayout());
final DefaultTableModel model = new DefaultTableModel(tableData, headers);
final JTable table = new JTable(model);
table.getColumnModel().getColumn(1).setCellRenderer( new LocalCellRenderer(120.0));
add(table);
add(table.getTableHeader(), BorderLayout.NORTH);
public class LocalCellRenderer extends DefaultTableCellRenderer
private double v = 0.0;
private double maxV;
private final JPanel renderer = new JPanel(new GridLayout(1,0))
public void paintComponent(Graphics g)
super.paintComponent(g);
g.setColor(Color.CYAN);
int w = (int)(getWidth() * v / maxV + 0.5);
int h = getHeight();
g.fillRect(0, 0, w, h);
g.drawRect(0, 0, w, h);
private LocalCellRenderer(double maxV)
this.maxV = maxV;
renderer.add(this);
renderer.setOpaque(true);
renderer.setBackground(Color.YELLOW);
renderer.setBorder(null);
setOpaque(false);
setHorizontalAlignment(JLabel.CENTER);
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int col)
final JLabel label = (JLabel) super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, col);
if (value instanceof Double)
v = ((Double)value).doubleValue();
return renderer;
public static void main(String[] args) throws Exception
final JFrame frame = new JFrame("Fred120");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(new Fred120());
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
} -
Can we hide column in a query depending upon the variable selected
Hi all,
let us say my report have 10 column.
now i am giving user option to select the values (let us say 'a' or 'b')
columns must be displayed depending upon the value selected by user ..
for example if user has selected 'a' then first five columns should be displayed..and if user has selected 'b' last five column should be displayed..(it will be OK even if we can hide the columns depending upon the selection )
Is it possible in BEx...please let me knowI did it sometime back. A bit complicated process.
Create an infoobject, manually enter the values "keyfig1" and "keyfig2".
Include this infoobject in the filters and restrict it using a "ready for input" variable.
Now create two formula variables.
Write a customer exit such that when you select "keyfig1", first formula variable's value should be set to 1 and other one's to 0.
Then in the query create two calculated key figures, multiply both with the formula variable. Also supress column (all active value == 0).
Then it will show the key figure which you have selected.
Pravender -
How to change the image dynamically depend upon the input parameter
Hi All
I have one report running depend upon the Organization specific, I have 15 operating unit and 15 different logo for each operating unit.
How to change the Logo dynamically depend upon the input passed by the user.
If I have three or four logo i can add in my layout using if else statement and its works fine but i have more that 10 logos so its no possible to keep these in My RTF Template.
Is it possible to change the logo according to the input without keeping this in Template.
I have seen this link but its not working fine
http://erpschools.com/articles/display-and-change-images-dynamically-in-xml-publisher
Regards
Srikkanth.MHi,
I have not completed fully,so sorry i cant able to share the files, could you please give me some tips and steps to do.
Without having the logo in RTF if it possible to bring the logo depends on the user input (Ie Operating unit).
Regards
Srikkanth -
Hide Advance table Depending upon the value of dropDown
Hi,
I have 2 advance tables. 1st one has a DropDown. Depending upon the value of the dropdown in 1st advance table, the second advanced table should get rendered.
I tried by getting the value of the dropdown by addingg a PPF and iterating trough the table and I got the value. But when I redirect to the same page, all the selection and other values in 1st advanced table vanish out.
Can someone help me getting the 2nd table hidden and at the same time retaining the values for the 1st advanced table.
Thanks in Advance,
Kaushik RambhiyaKaushik
Implement PPR for this requirement and dont redirect the page
Displaying image based selected value of choice bean
http://oracleanil.blogspot.com/2009/05/ppr.html
Thanks
AJ -
Do the execution time of the insert command depend upon the no the indexes
hi,
Do the execution time of the insert,update and delete command depend upon the no the indexes created for a table......
Edited by: [email protected] on Mar 4, 2009 3:02 AMsure,..
An index is a structure which contains entries pointing to the actual data in the table.
When you insert a record into a table, the data which should also be indexed is inserted in the index structure. This index data needs to be in a specific place, not just anywhere (as opposed to e.g. a heap table).
So this might lead to an update and insert in the index structure.
This is just to give you an idea. More on the subject in Tom Kyte's Expert Oracle Database Architecture and of course Oracle's documentation. -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
From which table we can get cat_guid depending upon the guid of a tr.ticket
Hi Experts,
I have to find the cat_guid depending upon the guid which is in crmd_orderadm_h table to retrive the fields categeorization module/element/type maintained in the service ticket.
Please tell me from which table we can get cat_guid depending upon the guid of perticular trouble ticket.
points will be rewarded if helpful.
regards,
EzalHi Ezal
Pass the GUID (CRMD_ORDERADM_H) to Function Module CRM_ORDER_READ to retrieve the required values.
I think this should do the trick.
Reward with points if helpful
Regards
Arden -
Hi ,
Please , let me know How to fill up the Flex ProgressBar control ,depending upon the Controls Seelcted inside the MXML
Lets say I have five text boxes and a dropdown box in my flex application, how can I make the progress bar fill up when there is text in each box, and the dropdown selected.
Please help
Thanks in advance .Hi Kiran,
You can do something like below to implement the functionlaity you needed...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" verticalAlign="top"
horizontalAlign="center" backgroundGradientColors="[0x000000,0x323232]" paddingTop="0" viewSourceURL="srcview/index.html">
<mx:Script>
<![CDATA[
private var j:uint=0;
// Event handler function to set the value of the
// ProgressBar control.
private function runit():void
if(j<=100)
j+=10;
bar.setProgress(j,100);
bar.label= "CurrentProgress" + " " + j + "%";
if(j>100)
j=0;
check1.selected=false;
bar.setProgress(j,100);
bar.label= "CurrentProgress" + " " + j + "%";
private function checkFunction():void
if(!check1.selected)
if(j<=100)
j-=10;
bar.setProgress(j,100);
bar.label= "CurrentProgress" + " " + j + "%";
if(j>100)
j=0;
check1.selected=false;
bar.setProgress(j,100);
bar.label= "CurrentProgress" + " " + j + "%";
else
runit();
]]>
</mx:Script>
<mx:Panel title="ProgressBar Control" layout="vertical" color="0xffffff" borderAlpha="0.15"
paddingTop="10" paddingRight="10" paddingBottom="10" paddingLeft="10" horizontalAlign="center">
<mx:Label width="100%" color="0x323232"
text="Click the button to increment the progress bar." />
<mx:HBox>
<mx:CheckBox id="check1" label="Check Me" color="#123456" click="checkFunction();"/>
<mx:Button id="Speed" label="Click" click="runit();" color="0x323232"/>
</mx:HBox>
<mx:ProgressBar id="bar" labelPlacement="bottom" themeColor="#EE1122" minimum="0" visible="true" maximum="100"
color="0x323232" label="CurrentProgress 0%" direction="right" mode="manual" width="100%"/>
</mx:Panel>
</mx:Application>
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari -
Feather radius for selection depending on the image size
Greetings everyone,
I have a question about setting the feather radius for a selection depending on the image size. I'd like make the edge in the resultant layer mask have roughly the 'same' feather appearance for varying image sizes.
For files below 2000 pixels I would set a feather radius of 0.2
For files above 2000 pixels I would set a feather radius of 0.3
However, I started working with 4000-10000 pixel images and I was wondering about the radius for those images.
Is there a more 'scientific' method I could follow? Any thoughts welcome
Many thanks
grYou would need to use Photoshop scripting to do that. Also using number of Pixels might not be what you want to use. While number pixel is an absolute number pixels you have have no size information till there is a DPI resolution involved. At 300 DPI 300 pixels are 1" in size at 72 DPI 300 pixels are 4.16 inches in size.
A conditional action is not possible adobe conditional action support but is possible with the downloadable script Siva's Contitional Action -
Declarative security of servlet- html view changes depending upon the role ??
Hi All,
There is acl for ejb methods and we can restrict roles to use certain
methods of the bean. Now my question is that
Is something possible in a declarative fashion so that user can have
certain options enabled and certain disabled in the jsp/servlet output
depending upon his role ?
For example, let suppose we have a servlet MyServlet that creates an
html output with some input boxes and buttons (add, modify, delete). Now
is it possible, that ceratin user will only see modify button, some
won't see any button, can only view the screen depending upon their role
and verything in declarative fashion ?
Any suggestion is welcome.
TIA,
Sudarson
Servlet security is defined in the context of the web application containing
the servlet, and web app security provides for the declarative protection of
resources like servlets, jsps and html pages; so the answer is no.
See http://e-docs.bea.com/wls/docs61///webapp/security.html
Thanks
Jim
sudarson wrote:
> Hi All,
>
> There is acl for ejb methods and we can restrict roles to use certain
> methods of the bean. Now my question is that
>
> Is something possible in a declarative fashion so that user can have
> certain options enabled and certain disabled in the jsp/servlet output
> depending upon his role ?
>
> For example, let suppose we have a servlet MyServlet that creates an
> html output with some input boxes and buttons (add, modify, delete). Now
> is it possible, that ceratin user will only see modify button, some
> won't see any button, can only view the screen depending upon their role
> and verything in declarative fashion ?
>
> Any suggestion is welcome.
>
> TIA,
> Sudarson
[Reply.vcf]
-
Purchase order(me21) number range depending upon the plant
Hello All,
I have to generate differant number range for purchase order depending on the plant.
I have found one User exit MM06E003 but it has only ekko as importing structure.
In whiih exit , I cam get plant (ekpo-werks ) and import it to memory id , which will be further used in
MM06E003.
Regards
MohitHi Mohit,
You can try the Enhancement MM06E005. Both EKKO and EKPO structures are available in various function exits in the above Enhancement.
Also you can try using BADI ME_PROCESS_PO_CUST. This BADI is called whenever transactions ME21N/22N/23N are called.
Hope the above info will help.
Regards.
Abhisek Biswas. -
Fastest algorithm to append a id to an ipaddress depending upon the net id
Hi Guys,
I wanted to know what will be the fastest algorithm to append a id to an ip address depending on the net id. I am using Java by the way. For example - Suppose I have a list of ids and corresponding net id i.e.
ID: 23 net ID: 10.44
ID:12 net ID: 10.56
ID:1 net ID: 10.70
ID: 78 net ID: 10.44.34.33
Now, if I receive a million records having different source IPs, what will be the fastest way to know to which ID it belongs. For example, say I receive a record having source IP 10.44.23.33 then I have to compare to all the net IDs and see what ID it will belong to; in this case, result need to be -> 23::10.44.23.33 because net ID:10.44 has ID 23. Suppose, I get a record having source IP 10.44.34.33 then result need to be -> 78::10.44.34.33. I hope, I am clear. Performance issue is if I have million records and list comprising say even 1000 ID and net ID entries then if I do say, compare the source IP to each entry of the list then searching will take O(n). Not sure though. I know, I can convert net ID to the range of IP addresses. Take ID:12 for example. The number of IP addresses that can belong to that network type will be from 10.56.0.0 to 10.56.255.255. Convert these numbers to long and convert the source IP also to long and see if it is between the range. But, this will take a long time even if I do binary search, am I right? Is there any way I can resolve the issue in a nifty way, say, using binary manipulation such as ORing or ANDing something. Would anyone please let me know? Thanks.
Waiting for your replies.
Edited by: wannabehacker on Jun 10, 2009 8:06 AM
Edited by: wannabehacker on Jun 10, 2009 8:07 AMwannabehacker wrote:
Hi Jos,
Thanks for your reply. But, don't you think this might have performance issue in worst case scenario or even in not so worst case scenarios. Suppose, I have million records and half of them do not have corresponding ID and net ID's in the list. Then if the list has 1000 entries but nothing for the source IPs received, the map will be parsed 1/2 million X 1000 times X 4. Am I missing something.Yup, a HashMap can find a key in order O(1) which is a whole lot better than searching a list of 1000 elements. Your calculations reduce to 1,000,000 X 1 X 4 at worst for all your records.
kind regards,
Jos -
Calculation of total depending upon the quarter selected
Dear All,
User want to see the quarterly total of all the amount.
Key figure struture in report is:-
Quarter
Actual amount
plan amount
variance
This will display the result for every quarter. Now user want to see the quarter total.
I can achieve this by making the property of CALQUARTER to suppress results never. This will give me output at the end of everyquarter. But i have variance field in my report whichi is giving a problem.
Say for 1st three posting period the variance is 100 respectively then the quarterly variace is coming as 300 total. I dont want this . I want to apply formula here.
formula=(( actual variacne - plan variance)/plan variacne)*100.
How can i achieve this in BEx?
Thanks & Rgds,
AnupHi Moorthy,
variance is a formula.
Quarter object used in hte key figure struture is a characteristics so i can't specify calculate result as total it only applies to key figures. For characteristics there is an option called Normailze to :- 'No normalization, Query result, Overall result, and Resul'. I dont know if we can use any of these???
Suppress results never will automatically take the summation only.
Thanks & Regards,
Anup
Maybe you are looking for
-
Problem in PO condition update
Hi Experts, I am using 'IDOC_INPUT_PORDCR1' to post PO. Everything is working fine except the repricing. ex:- In me21 if we have 'UPDATE' button at condition item level. when I am creating i need to press UPDATE button select pricing type 'C'
-
Pass request parameter to portlet in jsp
Hi, I wrote a simple PDK portlet that passes a request parameter to itself. Integrated in a portal page, the parameter passing works as intended. Integrated in a jsp using the Oracle taglib, the parameter passing does not work. Here is the code I am
-
I am a new IMac user and really enjoying IMovie. However am having endless problems with IDvd. The burn process appears to work perfectly,but when the disc is played back it freezes at approx 3-4 minutes, eventually quitting with message error readin
-
Why does my audio jump all over the place after detaching it
in iMovie HD you could extract audio then work with clips over it, in 09 I can't do anything. I extract/or detach the audio, but it is still attached or something. if you put a clip in the project widow the whole thing moves over, not just the video.
-
Hi experts , JDEV 11.1.2 which is better ? 1. implement menu using ADF menu component. 2. implement menu using ADF tree component. i just wish to knw which is better method? PMS