Config between Apache 1.3.20 on Linux 7.1 and WLS 5.1 on AIX?

Hi Gurus,
Help me !!!!!!!
Step I did to config:
1) installed apache 1.3.20 new version on linux 7.1 apache runs fine
with out plugin
2)Copied mod_wl.so from /weblogic/lib/aix which is running on AIX box
3) perl /usr/local/apache/bin/apxs -i -a -n weblogic
/home/java/mod_wl.so
copied mod_wl.so file to /apache/libexec
4) [root@dns libexec]# /usr/local/apache/bin/apachectl start
Syntax error on line 236 of /usr/local/apache/conf/httpd.conf:
Cannot load /usr/local/apache/libexec/mod_wl.so into server: invalid ELF
header
/usr/local/apache/bin/apachectl start: httpd could not be started
Could'nt start apache server...
checked the mod_wl.so file under /apache/libexec the user and group
permission says root ...... is that permission problem? or how do I
change group or permission to everyone?
I'm going through the weblogic document..
Can some body help me or send me a instruction t osetup?
Thanks in advance
raj

Hello,
You need to install the Linux Apache Plugin. The one you took is only if
you have installed Apache on AIX.
Regards,
Eric
"rajdn" <[email protected]> wrote in message
news:[email protected]..
Hi Gurus,
Help me !!!!!!!
Step I did to config:
1) installed apache 1.3.20 new version on linux 7.1 apache runs fine
with out plugin
2)Copied mod_wl.so from /weblogic/lib/aix which is running on AIX box
3) perl /usr/local/apache/bin/apxs -i -a -n weblogic
/home/java/mod_wl.so
copied mod_wl.so file to /apache/libexec
4) [root@dns libexec]# /usr/local/apache/bin/apachectl start
Syntax error on line 236 of /usr/local/apache/conf/httpd.conf:
Cannot load /usr/local/apache/libexec/mod_wl.so into server: invalid ELF
header
/usr/local/apache/bin/apachectl start: httpd could not be started
Could'nt start apache server...
checked the mod_wl.so file under /apache/libexec the user and group
permission says root ...... is that permission problem? or how do I
change group or permission to everyone?
I'm going through the weblogic document..
Can some body help me or send me a instruction t osetup?
Thanks in advance
raj

Similar Messages

HELP: Who's using LINUX with Java2 and WLS 5.1?

Have you experienced any problems? If so please tell me your experience.
I am using RedHat 6.1 w/ JDK 1.2.2 (006) and WebLogic 5.1 and I am having a
terrible time with exceptions like:
Exception in thread "main" java.lang.VerifyError: (class: weblogic/Server,
method: stopStatically signature: ()V) Inconsistent stack height 2 !=
268435455
- and -
Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
at java.lang.ClassLoader.defineClass0(Native Method)

If there is no libmuxer.so in $WL_HOME/lib/linux, then the Performance
Pack is not used.
visor-palm John wrote:
>
I'm downloading Blackdown's JDK now, what is libmuxer.so?
If Performance Pack not supported how do you prevent its use?
Here is my command-line, can you show me yours as a comparison?
/usr/java/bin/java -ms64m -mx64m -classpath
./lib/weblogic510sp5boot.jar:./classes/boot:./eval/cloudscape/lib/cloudscape
.jar -Dweblogic.class.path=./lib/weblogic510sp5.jar:./license:./classes:./li
b/weblogicaux.jar:./myserver/serverclasses -Dweblogic.home=. -Djava.security
.manager -Djava.security.policy==/local1/opt/weblogic/weblogic.policy
weblogic.Server
...but I get: java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
Thanks,
John
"Jesus M. Salvo Jr." <[email protected]> wrote in message
news:[email protected]..
I do for development. I suggest you give blackdown's JDK 1.2.2 FCS a
try.
Here's more info on my config:
RH 6.0 --- updated to 2.2.16 kernel and glibc 2.1.3
WLS 5.1 + SP5 + libmuxer.so (WLS linux performance pack -- unsupported)
Blackdown JDK 1.2.2-FCS
Apache 1.3.12 + modssl + WLS proxy
Regards,
John Salvo
visor-palm John wrote:
Have you experienced any problems? If so please tell me your
experience.
I am using RedHat 6.1 w/ JDK 1.2.2 (006) and WebLogic 5.1 and I amhaving a
terrible time with exceptions like:
Exception in thread "main" java.lang.VerifyError: (class:weblogic/Server,
method: stopStatically signature: ()V) Inconsistent stack height 2 !=
268435455
- and -
Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/kernel/AuditableThread
at java.lang.ClassLoader.defineClass0(Native Method)

Sync config between active and standby CSM

Is there a way to sync config between active and standby CSMs? Just as one that in CSS.
How about two SSL Service module in two different 6500 chassis?
Thanks.

HI,
there is right now no command to commit redundancy between two CSM-Modules. Maybe in the future there will be one. Okay in regards of sync the only way is to check for redundancy is the show mod csm x ft command. But be aware that some slight differences like a real not being in service are sometimes not recognized.
In regards of the SSLModule there is no way as far as I know to sync them. This won't be present in the future in my opinion as there are certificates which require a password or something like that and one won't be able to do redundncy without those passwords. So In my opinion no way to sync two SSL-Module because of security issues.
Kind regards,
Joerg

Transfer Config between Different Boxes

Hi,
We need to transfer complete configuration from one SAP Client (Development client) to another and both the clients are in different boxes (Server) in order to bring configuration in both the boxes in sync.
Kindly suggest the best practice and the process to be followed.
Regards,
Ghanapriya

We can transfer config between systems by migrating table data. We need to identify all tables to be migrated to other systems and upload them in destination system. Basis team will be the best contact to migrate standard tables data.
Thanks.

Proxy between Apache and Weblogic

Hi ,
I need to configure a proxy server in between Apache and Weblogic which means not all the requests should go through proxy, only one particular request should go from apache to proxy server and proxy server to Weblogic. Can any one help me how to configure this and how it is going to work.
Regards,
Vamsee

Not exactly sure.However can we use proxying by MIME type here
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/plugins/apache.html#wp132216
Regards

Interoperability between apache soap toolkit(client)and ms soap toolkit

Interoperability between apache soap toolkit(client)and ms soap toolkit.Give me an example where i can send and receive a complex data type from apache tomcat in client side to ms soap toolkit on the server side.It is urgent.Plz try to give me a solution as soon as possible.

The toolkits don't have to work together at all. And by the way, you aren't sending the data to the MS toolkit, you're sending it to some MS product that can process the data. Any data that follows the standards should work.

What is the difference between Apache and OC4J?

Hi All,
i am new to AS
just a question in my mind
what is the difference between Apache and OC4J?
Thanks

Apache is a webserver which comes with OracleAS with added Oracle modules.
OC4J = Oracle Containers for Java
enjoy yourself with some reading
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13994/toc.htm

What is the differece between Apache htttp web server and tomcat

Hi friends,
what is the difference between Apache htttp web server and apache tomcat.
Can i run php in tomcat

hi
1) different of apache and tomcat
http://forum.java.sun.com/thread.jspa?threadID=254299
2) different of apache tomcat and jakarta tomcat
http://forum.java.sun.com/thread.jspa?threadID=5191004

Do I need and how to secure the Unix/Linux agents authentication and communication to RMS?

Hi everybody
We have an environment including SCOM 2012 SP1, 10 windows server, 40 linux servers and 10 HP-UX servers. all of them are joined a trusted domain. I know the authentication method between windows agents and management server is kerberos. but not for linux and
HP-UX servers.
Now I want to secure the Unix/Linux agents authentication and communication to RMS. some questions:
1- how much secure and credible is current authentication method? and in a high secure environment can I trust SCOM self signed Certificates?
2- Considering this point that Unix/linux computers are joined to active directory domain and are using Kerberos to authenticate, can I use this
authentication method between RMS and linux Agents?
3- if I make a decision to use certificates should I use gateway server? (considering all servers and RMS are in same trusted domain)
any other suggestion?
Thanks in advance

nothing?

Want to install Oracle Linux Rel.6 and have a graphical interface

After reading:
Does Oracle Linux Rel.6 have graphical capabilities
How do you install the GUI for Oracle Linux Rel 6?

Dude wrote:
I'm glad you did not take my remark to call you a Linux enthusiast in bad way. It certainly was not meant to be a bad comment, but it's was probably silly of me to make such a remark anyway. I do not take personally offence easily in a forum like this. No, if you want to offend me, post poor code and claim it as the best thing since slice bread. ;-)
I guess I strive to be liberal, but by definition I don't think I really fit into any political wing.Likewise. Find politics a necessary evil to keep abreast of - such as the election in the US.
Back to Linux and your example, I have used such interfaces for many years too. Unfortunately we often have to use what is provided. However, the reason for the text interface is no longer valid, unless your input device is only a text based terminal.Not as much the input device - heck, pure tty devices are pretty much a thing of the past. It is about the complexity of the infrastructure between you and the device you need to administer. And about the task you need to perform.
The connectivity can mean being unable to run a GUI - due to performance, firewalls, router configurations and so on. The task at hand could very well be easily done, using the relevant o/s commands via a command line interface.
I think there is nothing against a GUI app that runs on your PC to sends appropriate commands to a text interface over a slow serial link, apart from the effort that is required to interact with errors, etc.Much more complex than that. A terminal server is usually used - and it attaches to the serial/RS232 connections of multiple devices that need to be administered. It will typically reside on a separate management network too, and not on the local company/corporate intranet.
So for you to access a device to administer, you need an open firewall to the management network to reach the management server that handles the serial console connection for the device you want to administer. You need a valid o/s account on that terminal server. You need to use ssh to access the command line of that terminal server. You need to enter the relevant command that will attach your ssh session to the RS232 console connection to the device to administer.
There is no GUI app on your side that can not only automagically do all this for you, but also provide you with GUI admin widgets to send commands to the remote device. Even if that remote device being sysadmin'ed is Linux, different distros and different versions of the same distros, means different commands, variances in command line parameters for such commands, and so on.
A sysadmin that cannot deal with such situations, and need a GUI as a crutch to administer a device.. I for one will not call that person a sysadmin. I would call the person incompetent instead. Harsh views perhaps, but being sysadmin is an unforgiving job. A mistake, or inability to access a device and fix it using the bare minimum, could result in severe financial loss for the company.

Can any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.
pls send the solution ASAP to my email id - ([email protected])

Make sure you have IBM's Java 1.1.8 JRE/JDK installed on your server and $JAVA_HOME set. Check the Oracle installation instructions. One other problem with Red Hat 7.0. is that
there is a libc library incompatibility problem with Red Hat linux 7.0 and Oracle 8i. The database will not start after you install it. Go to MetaLink (if you have support) and search for document # 121176.1. Basically, you have to download an older version of glibc, modify your Oracle link environment files, re-link the database executables and all will work normally. I did it on my Red Hat Linux 7.0 server two weeks ago and everything is working fine. Only other alternative is downgrade to Red Hat 6.2.

Do any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.

Oracle 8i is not compile/link time compatible with glibc 2.2. It
requires the glibc 2.1 compatibility SDK, i386-glibc-2.1-linux.tar.gz,
to install under systems based on glibc 2.2, like RedHat 7.0.
RedHat 7.0 ships with glibc 2.2. Oracle compiles with glibc 2.1. See the problem here? The good folks at valinux.com have created a compatiblitly SDK that will "fix" Redhat so you can install Oracle 8i. Go to the following link to learn more:
http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/readme.Oracle8i - This is the instructions for installing the patch. Return to this document at Step 4, where they tell you to "Install Oracle 8i." http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/i386-glibc-2.1-linux.tar.gz - This is the actual SDK.
null

Does any one help me. I tried to install Oracel 8.1.5 on RedHat Linux 7.0 and failed.

I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.

Vijaya zi,
Are you still having problem..with this..let me know??
first of all 8.1.7 , or 8.1.6. 8.1.5 neither one of these are certified to work with linux 7.0 Redhat.
Secondly there is a work around you could try..assuming that you have set the enviroment varaible and JVM corrent..( let me know if you need help with this)
here u go...
There is this linux gnu lib file which oracle is looking for which was there in 6.x and not in 7.0.
However if you have upgraded from 6.X linux to 7.0 then it will work..
for some reason it is looking for this glibc file.
either way the oracle message it is giving is not relavant...
it is just not going to work...unless you find a way to implement that glibc file..
I had link..which talk about the work around..
RedHat 7.0 issues
RedHat 7.0 ships with glibc 2.2. Oracle compiles with glibc 2.1. See the problem here? The good folks at valinux.com have created a compatiblitly SDK that will "fix" Redhat so you can install Oracle 8i. Go to the following link to learn more: http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/readme.Oracle8i -
This is the instructions for installing the patch. Return to this document at Step 4, where they tell you to "Install Oracle 8i." http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/i386-glibc-2.1-linux.tar.gz -
This is the actual SDK.
WARNING! WARNING! WARNING!
The procedure for RedHat 7.0 is not officially approved by Oracle. If you are putting a mchine into production, I would strongly recommend sticking with RedHat 6.2 instead (and patching the security holes in it). There are other problems with RedHat 7.0 that extend beyond Oracle. Personally, I'm waiting for 7.1 before I think hard about migrating
hope this help...
NOTE ---> ORACLE DOES NOT SUPPORT THIS METHOD.
Good Luck
Shah
null

Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0

Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir Buturovic

Providing a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account an

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?

The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

Config between Apache 1.3.20 on Linux 7.1 and WLS 5.1 on AIX?

Similar Messages

Maybe you are looking for