ConfigMgr 2012 R2/WSUS configuration issue

In my test environment, I have two systems setup as SUPs. One (SUP01) uses lists the synchronization source as 'Microsoft Update' and the other (SUP02) lists the first one as it's synchronization source. The second is a replica of the first
SUP and that's reflected in the WSUS options.
In my production environment, I have basically the same setup, just more SUPs, but any SUPs added after the first will not setup as a replication partner to the first. All SUPs added after the first list 'Microsoft Update' as the
synchronization source. I've tried uninstalling and reinstalling WSUS and the SUP role more than a few times, with the same result always. I've also tried configuring the WSUS update source in the WSUS options directly to point to the first SUP system.
The ConfigMgr 2012 R2 console never reflects this change and never synchs. I've been struggling with this issue for days. Is there a way to fix this so that the additional SUPs configure correctly as replicas of the first?

Technical is can be done (I guess)... Would I do it... Never!!!
It would be extremely hard to manage, and a million things could go wrong (and most likely would).
I don't see any reasons not to deploy a separate WSUS Server.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen
Yes, it will work. But never approuve Updates that are managed from SCCM. I will never recommend this because as Ronni said, a million things could go wrong.
Definitely create a second WSUS Server. If you want, you can synchronise the approval between them using a powershell script.

Similar Messages

SCCM 2012 R2 WSUS Sync issues

hi all.
We have implemented SCCM 2012 R2 with remote SQL instance, since we don’t have internet in CM server, we have used WSUS from upstream DMZ server . When we try to Sync we are getting below error
System.Security.SecurityException: Request for principal permission failed.~~
at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~
at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)~~The Zone of the assembly that failed was:~~MyComputer
Failed to refresh categories from WSUS server
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
Can anyone help me on this?

I spot the word "proxy" in the error message. Make sure that the servers can communicate with each other without a proxy.
Torsten Meringer | http://www.mssccmfaq.de

How import or publish ConfigMgr 2012 client into WSUS

Hi, I'm trying to deploy ConfigMgr 2012 r2 client through WSUS. But, I do not want to install SUP role on that WSUS server. What are my options.
I've tried Local update publisher to publish ConfigMgr client to WSUS and it works but not as I expected.
Whenever a client installs the ConfigMgr client from WSUS it downloads the client packages from DP and does not use the files available in the cab file. Is there a way to specify current directory as Source in ccmsetup switches?
I see I am left with installing the pre-requisites as separate update then execute client.msi to install sccm client. But that's a pain.. Anybody have any ideas?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Jason, That branch is not poorly connected. It has relatively lower bandwidth when compared with the centralized network. It can handle the client communication well and good. (I feel that I've not stated clearly in my previous reply)
The real question that I currently have(No offence), if at all I want to use the WSUS server as the main source for client deployment, what are my options?
Can I specify current directory as Source in ccmsetup.exe command line? (I don't see that can be done)
I'm thinking of a Vbscript to install pre-requisites and execute client.msi with required switches, but this would be my last approach. Do we have any better approach to accomplish this?.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

SCCM 2012 CU3 / WSUS - Update files are being deleted

We have been running this configuration since April of last year and haven't had any problems.
The problem is a majority of the window/security updates files in the WSUSContent folder are missing. I have ran wsusutil /reset and it takes a day or so but it will successfully download the 80GB of missing files. But after a few days they are
once again missing. We do run our EPP updates through WSUS and we have no problems with those.
I have searched endlessly through the log files, I can see where it goes through and skips them due to being superseded.
Do not see any database or communication issues between SCCM and WSUS, per the wsyncmgr.log it sees the thousands of that are available from our WSUS server.
So, any suggestions as to what might be causing the update files to be deleted from the WSUSContent folder?
We are running this on:
Server 2012 / SCCM 2012 CU3 / WSUS for 2012

So, just to make sure I understand. Is that we should be deploying updates from the SCCM Configmgr?
If you want to use the integrate experience, then yes.
but the problem is that a majority of updates are showing Downloaded = No when looking under All Software Updates
You need to either manually initiate the download of updates or set up an Automatic Deployment Rule (ADR). Either will cause ConfigMgr to download the updates placing them into an update package (which in turn gets placed on a DP where the clients can access
and download the updates).
wsynclog shows the sync of the update catalog, i.e., the metadata, and not the actual update binaries.
Jason | http://blog.configmgrftw.com

SCCM 2012 on Server 2012 and WSUS 3.0 SP2 on Server 2008

We are installing SCCM 2012 SP1 fresh into our development environment - the primary site server and the database (SQL 2012) are both being installed on Server 2012.
We have an existing WSUS box on a Windows 2008 (not R2) server - the WSUS server version is 3.2.7600.256. We have set this up as the software update point.
For the purposes of this discussion, these are the server names (obviously obfuscated):
Primary site server: sccm.domain.local
Database server: sccmdb.domain.local
WSUS server: wsus.domain.local
On the primary SCCM server, I've installed the WSUS user interface (Install-WindowsFeature -Name UpdateServices-UI), in order to work with the remote WSUS server.
Updates synchronization appears to be working fine, but when I try to setup client distribution via SUP, I'm getting the following error in the Application event log:
Log Name:      Application
Source:        SMS Server
Date:          8/6/2013 11:03:11 AM
Event ID:      6613
Task Category: SMS_WSUS_CONFIGURATION_MANAGER
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      sccm.domain.local
Description:
On 8/6/2013 11:03:11 AM, component SMS_WSUS_CONFIGURATION_MANAGER on computer sccm.domain.local reported: WSUS Configuration Manager failed to publish client boot-strapper package "9D5353E5-DA80-48C3-97DE-C9C528F73A2D" with version "5.00.7804.1000"
to the Software Updates Point.
As well as this in the WMC.log:
PublishApplication(9D5353E5-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions do not match.~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String
sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013
11:03:11.787+240><thread=3704 (0xE78)>
ERROR: Failed to publish sms client to WSUS, error = 0x80131509 $$<SMS_WSUS_CONFIGURATION_MANAGER><08-06-2013 11:03:11.803+240><thread=3704 (0xE78)>
It would seem obvious that this is because of a mismatch in versions between the WSUS server version on wsus.domain.local, compared to the UpdateServices UI on sccm.domain.local.
Is there a way around this, without having to upgrade the WSUS server to Server 2012?
Thanks for any thoughts you may have!

Not really. As mentioned though, even the separate WSUS server is probably overkill. In ConfigMgr, WSUS is used to handle the update catalog and that's it. Clients do *not* report status to the WSUS instance and do *not* download updates from the WSUS instance.
No management is ever done in WSUS.
So, in reality, once a month, clients connect to WSUS to download the delta update catalog (delta compared to what they currently have) which usually comes out to about a few hundred KB (yes KB, not MB) -- this download is done via BITS. The server also
syncs the catalog from the WSUS instance, via the SUP, in a similar fashion. If you are using SCEP, the frequency will be greater, but the deltas will be much smaller.
EULAs, as needed, are also stored in WSUS and accessed by clients -- these are also quite small only a select few updates requires them.
That's it. Standing up a dedicated WSUS instance means having a server sitting there doing almost nothing else.
If you are concerned about load on the site server, then you should create a separate site system that contains the MP, SUP (and WSUS instance), and DP. Then, for HA purposes, you can simply build a second site system with these three roles also and HA will
essentially be automatic (from a client functionality perspective).
Jason | http://blog.configmgrftw.com

[Forum FAQ] WSUS Configuration Manager failed to subscribe to update categories and classifications on WSUS Server

Symptom:
You might see an error in Software Update Point Status Message when you run software updates synchronization. (Figure 1)
WSUS Configuration Manager failed to subscribe to update categories and classifications to WSUS Server “Server Name”
Figure 1
When you check the WCM.log, WSUSCtrl.log and wsyncmgr.log. There is an error in WCM.log-“Category Product:6d76a2a5-81fe-4829-b268-6eb307e40ef3 (Windows 7 Language Packs) not found
on WSUS”. (Figure 2)
WCM.log:
Figure 2
Cause:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise. The Windows 7 language packs can be installed only from the Optional
Updates section in Windows Update. However, these language packs are not available on the Microsoft Windows Server Update Services (WSUS) server or through the Microsoft Download Center.
For more information, please review the link below:
Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise
http://support.microsoft.com/kb/2534462/he
Resolution:
Go to Administration -> Overview -> Site Configuration -> Sites -> Right-click CAS -> Configure Site Components -> SUP Products tab, uncheck “Windows 7 Language
Packs”, then sync again. (Figure 3)
Figure 3
After Sync successfully, the “Windows 7 Language Packs” option disappeared. (Figure 4)
Figure 4
Alternative:
About installing Windows 7 language packs, you could use SCCM 2012 Package feature (download manually) or Windows Update.
http://windows.microsoft.com/en-HK/windows/language-packs#lptabs=win7
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

I managed to fix my issue by coping the Client, ClientUpgrade, and Scripts from the files from SCCM install discs folder SMSSETUP to c:\program files\Microsoft Configuration Manager folder. I noticed that some of the files in the scripts
folder was missing and I copied the other folders over because I felt that maybe my local copy of the Client installer where missing some key files as well. Once I did that and disabled software update push, restarted the wsus computer, and re-enabled
the software update push it was able to publish the client and start installing it that way.
I thing the initial log messages where pointing me in the wrong direction for a few hours because I was thinking it was permissions as well and kept trying to figure that out but in the end I do not believe any of that was the reason I was receiving the
same error as you where.

Possible to point Windows 2003 server to Windows 2012 R2 WSUS?

Hello Community,
I have deployed Windows 2012 R2 WSUS in my organisation. I have no issues with Windows 7, 2008 R2 pointing to the WSUS server.
However, I am having issues pointing Windows 2003 R2 and Windows XP to the WSUS server.
On the Windows 2003 client, I have also ran wuauclt /detectnow and the GPO settings is set to:
In Windows 2008 R2, I know that I am getting updates from the WSUS because I can see the option
below (circled in red)
Questions:
1. In Windows 2003, how do I know that I am actually getting the updates from the WSUS and not from the
internet?
2. Are Windows 2003/XP clients compatible to pull updates from a Windows 2012 WSUS server?
3. If Windows 2003/XP clients are able to get updates from Windows 2012 WSUS server, how do I do it? Is
there any 'interface' for me to use?

In Windows 2003, there isnt an interface for administrators to "Check for Windows Updates managed by your system administrator" unlike in Windows 2008. (See screenshot on my first post)
In Windows 2003, I go to Tools > Windows Update and it is pointing me to microsoft's website.
Correct, In Windows 2003 you use the WUAUCLT.EXE command line utility, to perform client actions.
But that has *nothing* to do with how you *configure* the client, nor how you check the client's configuration. That is done exactly the same way regardless of which operating system is being used.
So when I say you know you're getting updates from WSUS by using the same method, that method is NOT looking at the WUApp applet in Control Panel, because that applet does NOT tell you that the client is getting updates from WSUS. It merely tells you that
some policy is in place that presumably tells the client to get updates from a WSUS server.
If you *really* want to know.... check the appropriate registry keys, or read the WindowsUpdate.log.... and that's done exactly the same way on every operating system.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

ConfigMgr R2 - Mac OS Enrollment Issues

Hello everyone,
First, a few details on where I'm at:
Single ConfigMgr 2012 R2 Site w/ PKI
Requisite roles are installed and HTTPS is enabled to allow 'internet and intranet' clients
Apple iMac with OSX 10.9
Mac is added to Active Directory
R2 Client is installed on Mac
Entered server name into Safari, installed Root Certificate and allowed it to 'Always Trust'
Ran 'Configuration Manager' tool in Preferences, go to enroll, enter credentials, and I get:
"Server is not trusted. Do you want to continue?" I choose yes and get the following:
"Error: Enrollment error (0x8018002a)"
If I look in the System Keychain on the Mac I see the 'SCCM' public and private keys. Running 'CMDiagnostic' doesn't show me any blatant errors.
If I take the Mac and connect to the Internet outside of our Domain I simply get 'Unable to contact the server for this request.' If I type in the FQDN of the server into Safari at that point it does not resolve. If I do an NSLOOKUP with the
trailing '.' or do a DIG of the address outside of the Domain, I do get it to resolve.
Any ideas? Next steps?

What guide are you following? Installing the certificate through Safari isn't related to client enrollment.
What do you see for errors on enrollment point that is trying to issue the certificate?
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_CertificateEnrollment
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.
I have to be honest, I had a consultant here to help with this last week and he never got it working so I'm now trying to go over everything he did to try and figure out what is going on.
Those logs you asked for, those look to be for the Certificate Registration Point but I don't have that role installed. When I look at the Mac OS Enrollment instructions I only see the Enrollment Point and Enrollment Proxy Point which are installed.

ConfigMgr 2012 R2 client on Windows 7 SP1 x86 causes "Program Compatibility Assistant" to appear

After I upgraded to R2 I am seeing the message below on newly installed Windows 7 SP1 x86 machines when I go to Control Panel and open the Configuration Manager Properties and then close it. This seems to only happen on 32-bit Win7 not on 64-bit.
I have created a new package for the client from definition and I also tried building new images using my Build and Capture task sequences. In this case I get the same message on the x86 Windows 7 SP1 machine if I log on after the Build & Capture is
done. My Build And Capture sequences uses the RTM-image for Windows 7 SP1 that has been patched using Offline Servicing.
Has anyone else seen this? Everything is working normally on the clients and if I click "This control panel works correctly" the message goes away. However, if I click "Open the control panel using recommended settings" that results in
admin-rights being required to open the Configuration Manager Properties under the Control Panel.
Regards,
Carl

I just pinged the product team and they are not aware of this issue at all so please someone open a support case with CSS where the issue can be worked.
Jason | http://blog.configmgrftw.com
I'll be opening a support case first thing monday :)
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa
Hi Tim
How did you go with this? We're still seeing this issue migrating Windows 7 x86 machines from the ConfigMgr 2007 SP2 R3/ConfigMgr 2012 client to the ConfigMgr 2012 R2 client in multiple environments.
Cheers
Sam
Ticket opened with Microsoft Support, still no fix but I will keep you all posted.
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

Database instance for SCCM 2012 and WSUS on a single primary site server

I am going to install SCCM 2012 and its SQL database on a single physical server. This is going to be a single primary site server. The default SQL instance will be dedicated to SCCM 2012 with no other named instances to be added on the SQL server down
the road.
During the WSUS server role installation, there is the Database Options page asking for using (1) Windows Internal Database, (2) existing db server on this computer, or (3) an external db server.
Since SCCM 2012 doesn't share db instance with others, how should I handle the WSUS db that's going to be hosted on the same SCCM/SQL physical server? Do I really need to create a separate SQL instance just for the WSUS db?
Thanks and regards.

Even though you can do it, it is the best practice to have SCCM 2012 and WSUS installed on separate instances.
http://technet.microsoft.com/en-us/library/hh692394
When the Configuration Manager and WSUS databases use the same SQL Server and share the same instance of SQL Server, you cannot easily determine the resource usage between the two applications. When you use a different SQL Server instance
for Configuration Manager and WSUS, it is easier to troubleshoot and diagnose resource usage issues that might occur for each application.

SCCM 2012 vs WSUS for Windows Server Updates

Hi,
Can anyone assist with clarifying the benefit of using SCCM 2012 for server patching over WSUS. As far as i understand SCCM can manage updates for third party applications if configured correctly. However if this is the only benefit I cannot see a clear
reason for using it.
Any information on the benefits of SCCM for server patching would be much appreciated.
Regards,
Michael.

Hi,
There are many reasons to use SCCM for patching instead of WSUS, I wrote a blog post a while ago listing 12 reasons why you should use it.
http://ccmexec.com/2012/08/top-11-reasons-why-you-should-use-configmgr-2012-for-managing-software-updates/
I hope that helps!
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

ConfigMgr 2012 R2 CU1 Client Installation fails during OSD Patch error 1635

Senario:
Single Primary Site A00, offloaded MP. R2 CU1 patch installed on primary site. Seperate "client with hotfix" package and distributed to offloaded DP.
OSD Task Sequence Installs the client fine as can be seen in the ccmsetup.log file ""<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="15:18:34.414-120" date="05-27-2014"
But then later in the same log the client iniated a repair, "<![LOG[Client (5.00.7958.1000) is installed and is the same or lower version. Initiating repair.]LOG]!><time="16:13:29.634-120" date="05-27-2014"
but at this stage fails to find the patch.
<![LOG[Repairing version 5.00.7958.1000 of the client with product code {8864FB91-94EE-4F16-A144-0D82A232049D}]LOG]!><time="16:13:29.666-120"
<![LOG[MSI PROPERTIES are REINSTALL=ALL REINSTALLMODE=vmous INSTALL="ALL" SMSCACHESIZE="15360" DISABLECACHEOPT="TRUE" FSP="<FSPName>" PATCH="C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP"
CCMDEBUGLOGGING="1" CCMLOGLEVEL="0" CCMLOGMAXSIZE="52488000" CCMLOGMAXHISTORY="5" SMSSITECODE="A00" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
CCMCERTID="SMS;624660EDFE6E9C9EFD4653520218B5D17010D8B9" REMEDIATE="true" SMSPUBLICROOTKEY=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]LOG]!><time="16:13:29.681-120
Error in the repair-msi log states, "Unable to create a temp copy of patch 'C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP'." " MainEngineThread is returning 1635"
By creating a share on the primary site and referencing the share as the patch loacation solves the issue.
PATCH=<a href="file://\\\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP">\\<ServernName>\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP.
Obviously its not ideal for the CU1 client msp to be installed over the WAN. Can anyone explain why:
1. The client seems to need a repair
2. Cannot access the MSP file when available locally on the client in the "'C:\_SMSTASKSEQUENCE" folder.

I always fall back to use this method, when dealing with hotfixes in a task sequence:
http://www.scconfigmgr.com/2014/03/26/install-kb2910552-hotfix-for-configmgr-2012-r2-client-during-osd/
It may be worth a shot to try it out, if you haven't already.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

Scenario – Multi Tenant ConfigMgr 2012 R2 and Same IP Address range for multiple customer

The service provider plans on managing customer’s workstation/desktop via ConfigMgr 2012 R2 CU3 which is hosted at Service Provider’s network however the Secondary Site (MP/DP Role) is hosted at customer’s physical location and on their network but
not joined to customers domain. The service provide plans to have a one-way trust with each customer initiated from service provider to each customer and have a copy of customer’s DNS by way of ADC hosted at service providers network.
Now the challenge is that we might end up having plenty of customers who will have same IP/subnet range such as 192.168.1.x and wanted to know the impact/issues around deployment. We may have challenges defining boundaries/boundary group for same IP range
or subnet for each customer because you can't have two boundaries with same IP range or Subnet. Also, since we have one way trust, we don't get the option to view customer's AD sites and services...
We are testing a scenario where we’ve defined the DNSSUFFIX on CM client so the client knows which MP to talk and MP presents with the nearest DP this works out quite well where you’ve defined IP boundary but haven’t tested anything with two or more customers
with same IP Range – hence not sure how the same IP/subnet range would work.
Wondering if we DO NOT define any boundary or boundary group so the client assume it's on slow or unreliable network and set the applications
Deployment Option to "Download content from DP and run locally" and still receives the application – I know this works in workgroup scenario but will this be a feasible option when dealing with multiple customers with same IP range ?
Please note that we are not planning on publishing MP or AD Schema on customer network but since we have a one way trust, we can do a discovery of customer’s AD forest.
Thoughts ?

Wondering if we DO NOT define any boundary or boundary group so the client assume it's on slow or unreliable network and set the applications
Deployment Option to "Download content from DP and run locally" and still receives the application – I know this works in workgroup scenario but will this be a feasible option when dealing with multiple customers with same IP range ?
This is a complex scenario which requires a lot of planning and even testing. Having no boundaries will work, but all DPs are treated as slow/remote then and it's not possible to define which one will be used then.
Torsten Meringer | http://www.mssccmfaq.de

No reports are visible in ConfigMgr 2012 R2 console but in visible in SSRS report manager

I'm installing ConfigMgr 2012 R2 with SQL server R2 SP2 in my lab environment. Everuthing went fine until i stumped upon a problem where the reports are not visible in Admin console but are visible in IE
I've gone through all the pre requisites and everything looks good.
The installation went fine and no errors in srsrpsetup.log and srsrpmsi.log
Reports are returning values while i'm running through IE
changed the AdminUIlog level to verbose and found the below error whenever i refresh the reporting node.
[44, PID:10712][12/20/2013 04:16:39] :Console query 'AllReports' started
[44, PID:10712][12/20/2013 04:16:39] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[12, PID:10712][12/20/2013 04:16:39] :Actions returned from cache for node 'msscnav://root/Windows/Wunderbar/ConsoleDisplay/MonitoringNode/MonitoringNodeOverview/ReportingRootNode/ReportsNode'.
Any ideas ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Thank you Garth, I can access the reports from other hosts as well.
Yes ,Newly created admins can see all the reports
I've gone through the event logs and nothing related to SSRS.
I dont think it's a FQDN issue, bcoz ican see in the logs the that the admin console successfully connected to reporting service. Only while retreiving the reports it throws error
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Discovered reporting services point - 'sccm.lab.local'.
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Root folder name is 'ConfigMgr_LAB'.
[12, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[10, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[12, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[20, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
and as you can see, it gives me "HTTP status 401: Unauthorized." instead "HTTP status Unnavailable".
Yes, i'm not a fan of accessing reports via console, but i dont want to leave an issue unresolved.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

OC4J Configuration issue

Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...

Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM

ConfigMgr 2012 R2/WSUS configuration issue

Similar Messages

Maybe you are looking for