Configuration - Item Category - How do I change the imcompletion procedure?

For an existing Sales Item Category, I want to change from one incompletion procedure to another existing incompletion procedure. However the field is greyed out in SPRO. How do I change this setting?

John Warby
Though it is kind of basic question but still you just said "Found it" which is not gonna help anyone. It would be nice if you share how and where did you found it or you could delete the thread if you don't wana share the solution. Every thread should be helpful for members from where they can get some knowledge.
Thank$

Similar Messages

I bought a pre-configured MBPro. How do I change the username?

I bought a computer that was on display and thus already configured to the store's settings (i.e. username, Mail, etc.). I've managed to change every setting to my liking except the username that appears on Terminal and the one on Sharing & Permissions; I keep getting the store's username on those fields.
I changed the home folder's name using a tutorial on YouTube but that change does not affect Terminal or Sharing & Permissions!
Please help, I don't want to re-install Lion... what a drag! =S

System Preferences>Users & Groups. Create a new admin account and delete the one you don't want. That should have been done first because it will nulify most of what you have already done.

Just installed Firefox 4 and I am no longer asked if I want to save tabs. Instructions say my Firefox settings may be configured differently. How do I change the settings?

Firefox is installed on a MacPookPro running Snow Leopard

Note: Since your question is solved, please mark it as "Solved It" to the right of the reply after logging in your account. It will help us to concentrate on new questions.

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
    [super viewDidLoad];
     This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
    self.tableView.allowsMultipleSelectionDuringEditing = YES;
    // populate the data array with some example objects
    self.dataArray = [NSMutableArray new];
    NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
    for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
        NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
        [self.dataArray addObject:itemName];
    // make our view consistent
    [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
    return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
    // Configure a cell to show the corresponding string from the array.
    static NSString *kCellID = @"cellID";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
    cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
    return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
    [self.tableView setEditing:YES animated:YES];
    [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
    [self.tableView setEditing:NO animated:YES];
    [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
    // The user tapped one of the OK/Cancel buttons.
    if (buttonIndex == 0)
        // Delete what the user selected.
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL deleteSpecificRows = selectedRows.count > 0;
        if (deleteSpecificRows)
            // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
            NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
            for (NSIndexPath *selectionIndex in selectedRows)
                [indicesOfItemsToDelete addIndex:selectionIndex.row];
            // Delete the objects from our data model.
            [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
            // Tell the tableView that we deleted the objects
            [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
        else
            // Delete everything, delete the objects from our data model.
            [self.dataArray removeAllObjects];
            // Tell the tableView that we deleted the objects.
            // Because we are deleting all the rows, just reload the current table section
            [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
        // Exit editing mode after the deletion.
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
    // Open a dialog with just an OK button.
    NSString *actionTitle;
    if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
        actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
    else
        actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
    NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
    NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
    UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                             delegate:self
                                                    cancelButtonTitle:cancelTitle
                                               destructiveButtonTitle:okTitle
                                                    otherButtonTitles:nil];
    actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
    // Show from our table view (pops up in the middle of the table).
    [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
    [self.dataArray addObject:@"New Movie"];
    // Tell the tableView about the item that was added.
    NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
    [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                          withRowAnimation:UITableViewRowAnimationAutomatic];
    // Tell the tableView we have finished adding or removing items.
    [self.tableView endUpdates];
    // Scroll the tableView so the new item is visible
    [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                          atScrollPosition:UITableViewScrollPositionBottom
                                  animated:YES];
    // Update the buttons if we need to.
    [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
    if (self.tableView.editing)
        // Show the option to cancel the edit.
        self.navigationItem.rightBarButtonItem = self.cancelButton;
        [self updateDeleteButtonTitle];
        // Show the delete button.
        self.navigationItem.leftBarButtonItem = self.deleteButton;
    else
        // Not in editing mode.
        self.navigationItem.leftBarButtonItem = self.addButton;
        // Show the edit button, but disable the edit button if there's nothing to edit.
        if (self.dataArray.count > 0)
            self.editButton.enabled = YES;
        else
            self.editButton.enabled = NO;
        self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
    // Update the delete button's title, based on how many items are selected
    NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
    BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
    BOOL noItemsAreSelected = selectedRows.count == 0;
    if (allItemsAreSelected || noItemsAreSelected)
        self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
    else
        NSString *titleFormatString =
        NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
        self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

How do I change the order of VPN configurations?

Hi, I have a VPN service set up with multiple "configurations". How do I change the order of the configurations?
Thanks in advance.

Apparently I accidentally made a duplicate post after this one. Refer here.

How do I change the way the item are listed in stacks

How do I change the way the item are listed in stacks?
Thanks
Joel Simkhai

Hello Joel,
You have some choices available by clicking and holding on the stack for a second, and there are five sorting orders to choose from.
I picked up a tip to create an empty folder and place it in the stack, give it a fancy icon and name it 0. Then by choosing the sort order as name, that fancy icon is always at the front.

How can we change the item cost at time of Inventory Transfer, thru SDK?

Hi All,
How can we change the item cost at time of Inventory Transfer, thru SDK?
My client wants some items to be transferred from A warehouse to B warehouse. When they transfer , they have to pay some octroi charges. This octroi charges they want to include in item cost at time of Inventory Transfer.
How do we give this additional cost effect in item cost at the time of Inventory transfer? Please help .
regrds,
Binita

Binita,
This question was posted earlier and was replied. If you want to do this through SDK please post the question to the SDK Forum.
Which ever route you take (SDK or manual within the system), you still have to follow the process steps involved.
Step 1: Transfer the goods
Step 2: Revaluate the Goods on WH B to reflect Octroi
Suda

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6. If you use MCX it will automatically pick the new catalog – however if doing it manually the following URLs need to be used for whichever client version is in question:
Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
To double check this applied you can run the following command:
/usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
to see what settings are for the computer and user appropriately.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
MCX
Another alternative is to use Workgroup Manager to manage the preferences via MCX from your server. This can be done for users, or for computers if they are bound to your Open Directory.
If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
Manually:
Choose the accounts, computers, or groups to have the preference applied to.
Click on Preferences, and then the Details tab
Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
Press Edit…
Under Often, add a New Key and enter the name CatalogURL
Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
Press Apply Now, then Done. Once users/computers have refreshed their MCX settings (usually the next login or restart) the new settings will take over.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
In order to have a system-wide configuration one has to run the following:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
Happily used and tested on my network
The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN will automatically pull the updates from the local repository at high speed without any configuration.
Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
Tags: automaticupdates mac clients macosx setting as default software update
Category: Serverfault
Share
0
0
Google +
0
0
0
5
You might also like:
Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
Iphone 4 Not Charging After Update To IOS6
IPad 2 Not Updating To IOS 5.1
How To Resolve The â€âunable To Install Updateâ€ Error For OTA IOS Updates?
What Is â€âSoftware Updateâ€ Doing When It Says â€âChecking For New Softwareâ€?
Advertisement
Comment
- See more at: http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

How do I change the copyright info and links in collection pages?

Can anyone tell me how I can change the copyright info and links on a collection page using the new updated Public Site Manager?
1. When I click on 'Configure selected collection' there doesn't seem to be an option to edit copyright information and I've tried editing the info in Settings > Copyright Notice but it doesn't filter through to the collection pages.
2. When I click on 'Configure selected collection' the links tab is empty but on my collection page there is a link called 'website' which links to our University website but the url is incorrect so I need to change it.
Example screenshot -
Thanks

Also when I add a url list to a collection page and then delete all the links I'm left with a blank url list showing in preview page in iTunes. This should not happen, the admin guide says -
"To delete a collection page URL list, delete all the links in the list. When you publish, if you have a URL list with no links, iTunes U Public Site Manager hides the empty URL list."
It doesn't. At least it doesn't for me when I preview the collection in iTunes.
Example screenshot

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

Somehow I have 2 iCloud accounts...how do I change the account one of my devices is logged into?

Somehow I have 2 iCloud accounts...How do I change the account one of my devices is logged into?

If you are using your main account for iTunes, you should continue to do so, otherwise you will lose access to many of your purchased items made that account.
You can delete the AOL account for iCloud only on your iPhone and first iPad, by going to settings > iCloud, scrolling down and hitting delete account button. You will then enter your me account details into the iCloud settings.
When you delete your AOL account from the iCloud settings, the phone should give you the option of keeping your data on the phone, you need to make sure that you choose this option, and also choose the option to merge when you add your new account back.

How do I change the apple id on the copy of Lion that shipped with my Macbook Pro?

I've inherited a Macbook Pro that shipped with Lion installed. The app store is showing three updates for iPhoto, GarageBand, and iMovie. When I try to update them it request the password for the Apple ID for the person who set up the Macbook. These apps came with Lion which came with the Macbook. I could reload the OS but that would wipe out my configuration. How can I change the Apple ID to reflect me as the new owner so I can update the apps included with Lion? Thanks in advance for any assistance.

If you know the seller, then maybe it can be done; according to the licensing agreement, if you sell/gift a Mac which came with Lion preinstalled, you are allowed to make a one time transfer of your software license. That would involve a call to Apple (I've not had to do this, but I've read that you need to call Apple and explain that you wish to transfer the Lion license from xxxxx to xxxxxx - don't know if it involves name/address or any other info). So, if your seller is willing to do this, and Apple re-registers the MBP in your name, you shouldn't have to do anything. You may want to check into this because it also may play a role when there is an OS update - not sure that you'll be able to get that with your different Apple ID.

Configuration - Item Category - How do I change the imcompletion procedure?

Similar Messages

Maybe you are looking for