Configuration Problem in webdynpro using Custom containers

Hi,
I am practicing the web dynpro examples for beginners using the below Link
Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
Its configuration example number 5.
I did as explained in the example but I am unable to get the required output.
I found only one difference where the CONFIGURATION STATE is POSSIBLE in my application and in the tutorial is AVAILABLE.
Could anyone please help me in this issue

Hi Chaitanya ,
in the document it has the following heading
Creation of an Application Configuration and corresponding Component Configuration
in that 3rd Point if you see there the configuration State is AVAILABLE but for my Application its having POSSIBLE
Regards

Similar Messages

Problems installing when using custom library

I can't install generated application on iPad (IOS report installation error), when I use custom library. Before DPS App Builder v25 all was OK, problems started after 1 feb, when I installed new AppBuilder. I can't install any application (generated from AppBuilder v25) with custom library, incl. reference applications from devnet articles.

Hi, Neil!
Thank you for your attantion to my problem. Explain me successful installation on IOS when I use standard library with identical certificates.
IOS reports "installation failed" only when I switch to custom library.
P.S.: our friend with another DPS Pro account have the same error. He tries to create 2 "Pro" applications, first installation success, second fail. All certificates and mobileprovisions created yesterday...
Message was edited by: Yuriy Petrov

Problem with WebDynpro using ReverseProxy

When calling a WebDynpro-Application through a ReverseProxy (mapping e.g. https://portal.intranet.company.ch to https://portal.ssl.company.ch) the first screen of the application can be called, but nothing happens when clicking on any of the controls/links or the message "500 Internal Server Error: The Web Dynpro Application 'xyz' has expired. Please restart the application either with the refresh button or click the following link xyz." appears.
Anybody has the same problems, any ideas why or how to solve it?

See OSS-Note <a href="https://service.sap.com/sap/support/notes/839969">https://service.sap.com/sap/support/notes/839969</a>
For EP6.0 you could use a Reverse Proxy Filter: <a href="https://service.sap.com/sap/support/notes/791080">https://service.sap.com/sap/support/notes/791080</a>
With NW04 all links in J2EE/Portal (inlcuding WD) should be relative and thus also WD should work through Reverse Proxies
Message was edited by:
Manuel-Jeremy Schaffner

Problem deploying and using custom Tags in jar files

I am trying to create a custom tag library of Java classes, package them in a JAR file, and use them in another web application. Here is the JAR file structure, named mytags.jar:
META-INF
META-INF/manifest.mf
META-INF/taglib.tld
mytags/FooBar.class
mytags/Another.class
...Here is the taglib.tld file:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<taglib xmlns="http://java.sun.com/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee web-jsptaglibrary_2_0.xsd"
version="2.0">
   <tlib-version>1.0</tlib-version>
   <short-name>foo</short-name>
   <uri>fooTags</uri>
   <info>My tags</info>
   <tag>
     <name>fooBar</name>
     <tag-class>mytags.FooBar</tag-class>
     <body-content>empty</body-content>
     <attribute>
       <name>name</name>
       <required>false</required>
       <rtexprvalue>true</rtexprvalue>
     </attribute>
</tag>
</taglib>The FooBar class has getName(String) and setName() methods.
In the web application, I have copied mytags.jar into the WEB-INF/lib directory. I've verified that it lands in the corresponding directory for my appserver (I'm using Tomcat 6.0.10).
Here's the header for my JSP:
<%@ page language="java" contentType="text/html;charset=UTF-8" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
<%@ taglib uri="fooTags" prefix="foo" %>
<foo:fooBar name="dummy" />
...When I access my page, the browser sits there and spins, not able to do anything. I know that some of the content is executed, but it is not able to get to the fooTags. I have tried replacing fooTags with WEB-INF/lib/mytags.jar, to no effect.
According to the docs, I should not need to include anything in web.xml to reference the fooTags. The tag library classes are valid, since I used them as local tags prior to moving them into a Jar library.
Any help would be appreciated

Take the code of the jsp file :
<%@ page language="java" %>
<%@ taglib uri="WEB-INF/struts-html.tld" prefix="html" %>
<html>
   <head>
     <title> First Struts Application </title>
   </head>
     <body>
        <table width="500" border="0" cellspacing="0" cellpadding="0">
        <tr>
          <td> </td>
        </tr>
        <tr bgcolor="#36566E">
          <td height="68" width="48%">
            <div align="left">
              <img src="images/hht.gif" width="220" height="74">
            </div>
          </td>
        </tr>
        <tr>
         <td> </td>
        </tr>
       </table>
       <html:form action="Lookup"
                  name="lookupForm"
                  type="wiley.LookupForm" >
       <table width="45%" border="0">
        <tr>
          <td>Symbol:</td>
          <td><html:text property="symbol" /> </td>
        </tr>
         <tr>
          <td colspan="2" align="center"><html:submit/> </td>
         </tr>
        </table>
      </html:form>
     </body>
</html>

How to use custom component configuration

Hi Experts,
For a standard webdynpro object I have created a new z component configuration by copying from existing one. In the standard there are already 2 existing component configuration.
This webdynpro does not have any application created so I am not able to directly assign this component configuration.
During run time in portal when I view the properties I can see a application for this webdynpro component and the standard component configuration being used.
My question is how to use the z component configuration I have created in the webdynpro?

Hi Srinivas
I researched your problem. I hope the below code helps you. You could add the below code to wddoinit.
DATA: lo_api_controller       TYPE REF TO if_wd_component,
          lo_pers_manager      TYPE REF TO if_wd_personalization,
          ls_config_key           TYPE wdy_config_key.
           lo_api_controller = wd_comp_controller->wd_get_api( ).
           lo_pers_manager = lo_api_controller->get_personalization_manager( ).
                 ls_config_key-config_id = 'ZTEST' .
                 lo_pers_manager->load_config_by_key( ls_config_key ).
Regards
Lorraine

Problem configuring SOA suite to use OID for authentication

We are in the process of rebuilding our environment to use the full SOA suite with our OID server for authentication (was previously just BPEL using AD directly), and have encountered several problems (below). We have rebuilt the OID server, and reinstalled the SOA suite into a clean ORACLE_HOME to no avail.
We first rebuilt the OID server using the following steps (derived from Oracle® Internet Directory Administrator's Guide):
1)     Create the Import and Export profiles for AD synchronization. We did this using the Directory Integration and Provisioning Server Administration tool under “Active Directory Configuration”
2)     Modify the map file to specify the correct OU mappings between AD and OID.
3)     Update the profile with the new map file using “dipassistant.bat mp”
4)     Bootstrap the import profile using “dipassistant.bat bootstrap”
5)     Start a new instance of the Integration server (odisrv) running on config set 1 (the config set containing the Active Directory import/export profiles) using “oidctl”
6)     Set the Import profile to Enable. The OID server does not export changes to AD in our current configuration, so the Export profile is left on disable (and not bootstrapped)
At this point it appears that the AD synchronizes correctly into our new OID server.
Next we installed the SOA suite:
1)     We ran “irca.bat” on our database server to create the ORABPEL, ORAESB, and ORAWSM schemas and associated integration repository structure.
2)     After launching the SOA suite installer, we selected Advanced Install.
3)     On the next screen, we selected J2EE Server, Web Server, and SOA Suite.
4)     We then provided the credentials for our Oracle database, and the passwords for ORABPEL, ORAESB, and ORAWSM.
5)     We configured our new AS instance as an administration instance, but did not opt to use from a separate HTTP server, and did not make this instance part of an OAS cluster topology.
And finally, we configured our new SOA suite instance to use OID for authentication (using the instructions in Oracle® BPEL Process Manager Administrator's Guide section 2.1.3):
1)     Used the configure_oid.bat command to seed OID with required users only.
2)     Logged into the OracleAS Control Console
3)     Chose the oc4j_soa instance, then Administration->Security->Identity Management
4)     Configured the OID server using a non-ssl connection and the cn=orcladmin account.
5)     When prompted, chose to reconfigure all applications in the oc4j_soa instance to OID, but not to use SSO for any of them.
6)     Copied the contents of ORACLE_HOME\j2ee\home\config\jazn.xml to ORACLE_HOME\j2ee\oc4j_soa\config\jazn.xml
7)     Restarted the application server.
After this procedure, we encountered the following issues:
1)     The BPEL console appears to authenticate users correctly out of OID, but no users have access to the default domain, including bpeladmin and oc4jadmin. All users receive a similar access denied message when attempting to log into the BPEL Admin Console.
2)     We cannot upload a BPEL process to our new server via JDeveloper’s standard BPEL deployment mechanisms. The connection appears to be working properly and passes all tests, but on uploading a process we get a Java AccessDeniedException. ESB appears to be functioning properly, and accepts uploaded projects without issue.

Bassman,
We recently configured our SOA Suite to use OID and SSO. We had the same issues you are having, and we found the resolutions in a blog from Jaas Poot (http://blog.jpoot.com/category/oracle-appserver/oid-ldap/). For the BPEL domain access, this involved going to the data-sources.xml file and changing the database passwords from using ->pwForOrabpel for the orabpel schema and ->pwForOraesb for the oraesb schema to the real passwords; the blog explains more about this.
The blog also covers the JDeveloper deployment issue, and another issue we encountered, where we couldn't access the BPEL Admin console. All of these were resolved following the steps in the blog.
Hope this helps
Candace

Oracle ADF 11g – Authentication using Custom ADF Login Form Problem

Hi Guys,
I am trying to Authenticate my adf application using custom Login Form.
following this..
http://www.fireboxtraining.com/blog/2012/02/09/oracle-adf-11g-authentication-using-custom-adf-login-form/#respond
But my Login Page is not Loading.I think its sending request in chain.my jdev version is 11.1.1.5.Any Idea.
Thanks,
Raul

Hi Frank,
I deleted bounded code and In another Unit Test I created a simple login.jspx page and applied form based authentication but still facing same problem means something wrong in starting.
My login.jspx page is
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1" >
      <af:form id="f1" >
        <af:panelFormLayout id="pfl1">
          <af:inputText label="USERNAME" id="it1"
                        />
          <af:inputText label="PASSWORD" id="it2"
                          />
          <af:commandButton text="LOG IN" id="cb1" />
          <f:facet name="footer">
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>
Don't know wht real problem is

Custom JAAS Login Module 9.0.4 configuration problems

Hello,
We have created a custom JAAS Login Module on OC4J 9.0.4 and are having some sort of configuration problem
We always get this error:
Caused by: javax.security.auth.login.LoginException: Login Failure: all modules ignored
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:779)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:535)
The Login Module is configured for a specific deployed application in the global jazn-data.xml and is being run as I have attached a debugger to the app server.
Our authentication process succeeds and we return a "true" from the login() method. No exceptions are thrown from our Login Module.
our ORACLE_HOME/j2ee/home/config/jazn-data.xml has this added
<application>
<name>helloworld</name>
<login-modules>
<login-module>
<class>com.test.JaasLoginModule</class>
<control-flag>required</control-flag>
<options>
</options>
</login-module>
</login-modules>
</application>
The j2ee/home/application-deployments/helloworld/jazn-data.xml looks like this:
<?xml version="1.0" encoding="UTF-8" standalone='yes'?>
<!DOCTYPE jazn-data PUBLIC "JAZN-XML Data" "http://xmlns.oracle.com/ias/dtds/jazn-data.dtd">
<jazn-data />
and we added this into the j2ee/home/application-deployments/helloworld/orion-applicaton.xml
<jazn provider="XML" location="jazn-data.xml" >
<property name="role.mapping.dynamic" value="true"/>
<property name="custom.loginmodule.provider" value="true"/>
<property name="jaas.username.simple" value="true" />
</jazn>
Are we missing anything? Our code runs, it seems like there is something lacking in the configuration on the OC4J side of things.
Anyone know what we are missing?
Thanks....

Hi,
if you are on 9.0.4 then <property name="custom.loginmodule.provider" value="true"/> shouldn't work because its a parameter of 10.1.3
Frank

I have problem sending a email ..spool not created using custom FM

Hi experts,
i have problem sending a email ..spool not created using custom FM...this the custom FM
* Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
Source code
this is the source code for this FM
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    IF sy-subrc IS NOT INITIAL.
      MESSAGE e040(zhrcd) RAISING spool_not_created.
    ENDIF.
    PERFORM process_email USING email1
                                email2
                                email3
                                subject
                                attachment_name.
    WAIT UP TO 5 SECONDS.
    SUBMIT rsconn01 WITH mode   = 'INT'
                    WITH output = 'X'
                    AND RETURN.
ENDIF.....
Please let me know
Edited by: Thomas Zloch on Nov 16, 2010 5:53 PM - please use code tags

Hi srinivas ,
Could you please Check
FORM summary_report .
DATA: lv_success TYPE i,
          lv_error TYPE i,
          lv_total TYPE i.
DESCRIBE TABLE gt_data LINES lv_success.
DESCRIBE TABLE gt_error LINES lv_error.
DESCRIBE TABLE gt_message LINES lv_error.
lv_total = lv_success + lv_error.
lv_total = lv_success.
gwa_summary-record = text-008."Number of Successful records.
gwa_summary-number = lv_success.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-009."Number of error records'.
gwa_summary-number = lv_error.
APPEND gwa_summary TO gt_summary.
gwa_summary-record = text-010."Total number of records processed.
gwa_summary-number = lv_total.
APPEND gwa_summary TO gt_summary.
CLEAR gt_fieldcat.
gwa_fieldcat_summ-col_pos = 1 .
gwa_fieldcat_summ-fieldname = 'RECORD'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-011."Records
gwa_fieldcat_summ-outputlen = '70'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
gwa_fieldcat_summ-col_pos = 2 .
gwa_fieldcat_summ-fieldname = 'NUMBER'.
gwa_fieldcat_summ-tabname = 'GT_SUMMARY'.
gwa_fieldcat_summ-seltext_l = text-012."Number
gwa_fieldcat_summ-outputlen = '10'.
APPEND gwa_fieldcat_summ TO gt_fieldcat_summ.
ENDFORM.                    " SUMMARY_REPORT
*&      Form ERROR_REPORT
FORM error_report .
gt_fieldcat_err[] = gt_fieldcat[].
gv_fieldcat_err-col_pos = 1.
gv_fieldcat_err-fieldname = 'PERNR'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-070."Employee Number
gv_fieldcat_err-outputlen = '20'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
gv_fieldcat_err-col_pos = 2.
gv_fieldcat_err-fieldname = 'MESSAGE'.
gv_fieldcat_err-tabname = 'GT_MESSAGE'.
gv_fieldcat_err-seltext_l = text-071."Error Message
gv_fieldcat_err-outputlen = '80'.
APPEND gv_fieldcat_err TO gt_fieldcat_err.
ENDFORM.                    " ERROR_REPORT
*&      Form FINAL_REPORT
FORM final_report .
DATA:lv_layout TYPE slis_layout_alv,
         lt_events_summ TYPE slis_t_event,
         lv_events_summ LIKE LINE OF lt_events_summ,
         lt_events_det TYPE slis_t_event,
         lv_events_det LIKE LINE OF lt_events_det,
         lt_events_err TYPE slis_t_event,
         lv_events_err LIKE LINE OF lt_events_det,
         lt_events_msg TYPE slis_t_event,
         lv_events_msg LIKE LINE OF lt_events_det.
lv_events_summ-name = 'TOP_OF_PAGE'.
lv_events_summ-form = 'TOP_OF_PAGE1'.
APPEND lv_events_summ TO lt_events_summ.
lv_events_det-name = 'TOP_OF_PAGE'.
lv_events_det-form = 'TOP_OF_PAGE2'.
APPEND lv_events_det TO lt_events_det.
lv_events_err-name = 'TOP_OF_PAGE'.
lv_events_err-form = 'TOP_OF_PAGE3'.
APPEND lv_events_err TO lt_events_err.
lv_events_msg-name = 'TOP_OF_PAGE'.
lv_events_msg-form = 'TOP_OF_PAGE4'.
APPEND lv_events_msg TO lt_events_msg.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat_summ
      i_tabname                        = 'IT_SUMMARY'
      it_events                        = lt_events_summ
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_summary
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF CHK_DTL IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout                        = lv_layout
      it_fieldcat                      = gt_fieldcat
      i_tabname                        = 'gt_data'
      it_events                        = lt_events_det
IT_SORT                          =
I_TEXT                           = ' '
    TABLES
      t_outtab                         = gt_data
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_err
     i_tabname   = 'gt_error'
     it_events   = lt_events_err
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
   EXPORTING
     is_layout   = lv_layout
     it_fieldcat = gt_fieldcat_msg
     i_tabname   = 'gt_message'
     it_events   = lt_events_msg
   TABLES
     t_outtab    = gt_error.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_err
      i_tabname   = 'gt_message'
      it_events   = lt_events_err
    TABLES
      t_outtab    = gt_message.
IF GT_MESSAGE[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      is_layout   = lv_layout
      it_fieldcat = gt_fieldcat_msg
      i_tabname   = 'gt_message'
      it_events   = lt_events_msg
    TABLES
      t_outtab    = gt_message.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
   i_interface_check             = ' '
IS_PRINT                      =
   i_screen_start_column         = 0
   i_screen_start_line           = 0
   i_screen_end_column           = 0
   i_screen_end_line             = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER       =
ES_EXIT_CAUSED_BY_USER        =
EXCEPTIONS
PROGRAM_ERROR                 = 1
OTHERS                        = 2
ENDFORM.                    " FINAL_REPORT
*&      Form top_of_page
      text
FORM top_of_page1.                                          "#EC CALLED
WRITE text-013."SUMMARY REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page2
      text
FORM top_of_page2.                                          "#EC CALLED
WRITE text-014."DETAIL REPORT.
ENDFORM.                    "top_of_page
*&      Form top_of_page3
      text
FORM top_of_page3.                                          "#EC CALLED
WRITE text-015."ERROR REPORT
ENDFORM.                    "top_of_page
*&      Form EMAIL_NOTIFICATION
FORM email_notification .
DATA: lv_email1 TYPE somlreci1-receiver,
       lv_email2 TYPE somlreci1-receiver,
       lv_email3 TYPE somlreci1-receiver,
       lv_subject TYPE char200,
       c_flag     TYPE c           VALUE 'X',
       lv_attachment TYPE char50.
CLEAR: lv_email1,
         lv_email2,
         lv_email3,
         lv_subject,
         lv_attachment.
SELECT SINGLE email1
                email2
                email3
    FROM zhr_interface_pr
    INTO (lv_email1,lv_email2,lv_email3)
    WHERE zinterfaceid EQ gc_objectid.
IF sy-subrc EQ 0.
    IF sy-batch EQ 'X'.
Send email notification
      lv_subject = text-037.
      lv_attachment = text-038.
      CALL FUNCTION 'Z_SEND_EMAIL_FROM_SPOOL'
        EXPORTING
          email1            = lv_email1
          email2            = lv_email2
          email3            = lv_email3
          subject           = lv_subject
          attachment_name   = lv_attachment
        EXCEPTIONS
          spool_not_created = 1
          OTHERS            = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "
Edited by: katewinslate@SAP on Nov 17, 2010 12:50 PM

Trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

Moving this discussion to the Adobe Creative Cloud forum.
Cock please try a different web browser. If you continue to face difficulties then you can contact our support team directly at Get help with orders, refunds, and exchanges.

1. The procedure called by CUSTOM.pll causes the problem when we use f60gen

When CUSTOM.pll contains a call to a package that in turn calls a remote package, the CUSTOM.pll compile hangs forever.
1. The procedure called by CUSTOM.pll causes the problem when we use f60gen. Though same procedure compiles successfully using "alter procedure compile" command.
2. We have observed the problem happens due to synonym present on the remote database(db link).
It doesn’t work if you are calling SYNONYM on remote database. It works, for calls to tables or procedures or packages in remote database if that object is OWNED DIRECTLY by the account to which dblink is connecting to.
select object_name, object_type from user_objects@NH_SCM_ICE.DB.ATT.COM ;
OBJECT_NAME OBJECT_TYPE
FA_LOCATIONS SYNONYM
FND_FLEX_VALUES SYNONYM

The database link is created under the APPS user in the local database but connects to a different user (SWCS_ICE_SUPCHAIN) in the remote database.
The user in the remote database does not own any objects. It only has synonyms to objects owned by apps and others.
Incidentally, the hang also happens when trying to describe the remote package from the application tier (8.0.6.3 sqlplus) but the describe works fine from the DB tier (10gR2 sqlplus).

How to use custom pipeline dlls in Biztalk Projects so that they appear in the send/receive pipeline configuration after deployment?

I have a existing Biztalk application that uses custom pipelines for receiving excel files. I have the dll of that custom pipeline. Now i created another BT application that needs to use that same custom pipeline. But after i deploy the application in
Biztalk, i can't see the pipeline available in Receive pipeline configuration combo box during configuration. I have referenced the custom pipeline dll in my project before deploying, but that doesn't help. I also copied the dll in the C:\Program Files
(x86)\Microsoft BizTalk Server 2010\Pipeline Components folder and C:\Program Files (x86)\Microsoft BizTalk Server 2010 folder, but that doesn't make the pipelines appear during configuration too.
Can anyone give any idea on how can i use these custom pipeline dlls in project so that they appear in configuration after deployment?

If you plan on using the deployed pipeline across multiple applications in BizTalk, the BizTalk Application (using the BizTalk Server Administration Console) should have the other application [where the pipeline is deployed] as reference.
For e.g.: Custom Pipeline (myCustomPipeline) part of a BizTalk Project (dll - myCustomProject.dll) deployed under Application [Some Application] also to be used in another BizTalk Application [Some Other Applicaiton] then using BizTalk Server Administartor
right click the "Some Other Application" and select "Properties"
on the "Properties" page, left hand side, select "References"
on the right-hand side, use "Add" to add the "Some Project" as a reference.
Doing so will ensure that ALL resources (maps, schemas, orchestrations, send ports, receive locations, rules, etc.) deployed for "Some Application" are available/referensible in "Some Other Application".
Regards.

Facing problem in integrating my custom jsp with the workflow engine

Hi,
I am using Jdeveloper 11.1.1.6.0 for BPM 11g implementation on my Application.I have Weblogic Server 10.3 Installed and configured the domain. Also the server is up and running.
I am trying to create workflow and wants to integrate it with my custom jsp but i am facing problem in integrating my custom jsp with the workflow engine.Can you please answer the following questions:
1)how to link BPM human task with my custom jsp (Requester jsp).
2)how my custom jsp data(Requester data) will be stored in workflow engine and how the same data will be visible to the next custom jsp(Reviewer jsp).
This is urgent .Any early reply will be great help.
Thanks in advance.
Edited by: 990133 on Mar 24, 2013 5:31 AM

you forgot to add the usage dependency in the DC metadata section in your DC, you have to add the XSS~utils and fpm as a used DC's as part of your DC, try to add those, if you already done that, so check where missed the adding of used webdynpro components in any of the VAC's or FC's,
Cheer,
Appa

WebUtil's configuration problem

I have the following problem:
I installed WebLogic Server 10.3.5, Fusion Middleware (Forms/Reports) 11.1.2 and Oracle XE 11g.
My environment works correctly, when application don't uses webutil.
When I open an application that uses WebUtil, happens the following error: "FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502."
Another error too occurs:
In the button "Browse" I use client_get_file_name, but the following error is displayed: "oracle.forms.webutil.file.FileFunctions bean not found. WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work".
To configuring the webutil, I used the book Oracle Forms Developer WebUtil User's Guide Release 1.0.6. My webutil is 1.0.6.
Any help is welcome
thanks!

Just a quick note, questions related to Oracle Forms as well as Oracle Forms and WebUtil integration should be posted in the Oracle Forms section of Oracle Forums: Forms You will receive a quicker response if you post Oracle Forms-related questions in that forum location.
Anyway, WebUtil 1.0.6 is not supported to use with Oracle Forms and Reports 11gR2. Oracle Forms 11gR2 comes with WebUtil 11.1.2.x (the version which is supported for Forms 11gR2) which the both webutil.olb and webutil.pll are deployed in %ORACLE_HOME%\forms ($ORACLE_HOME/forms in Unix) where ORACLE_HOME is the Oracle Home for your Fusion Middleware installation. Also, if you haven't downloaded it already, you will also need JACOB version 1.14.3 (the version of JACOB supported for Oracle Forms 11gR2) which can be downloaded at http://sourceforge.net/projects/jacob-project/files/jacob-project/1.14.3/jacob-1.14.3.zip/download.
After JACOB is downloaded, you will need to copy the jacob.jar to %ORACLE_HOME%\forms\java. Using Oracle Support Note 1076945.1, you will need to sign jacob.jar using the sign_webutil.bat script (located in %ORACLE_HOME%\forms\templates\scripts). The note contains steps on how to set up the batch script as well as how to run the script to sign jacob.jar. IMPORTANT: Make sure your JDK is in your PATH environment variable and you run Command Prompt as an administrator; otherwise, jar signing errors may occur.
Next, place jacob-1.14.3-x86.dll into %ORACLE_HOME%\forms\webutil\win32 and jacob-1.14.3-x64.dll into %ORACLE_HOME%\forms\webutil\win64.
After that, make sure that the WebUtil schema has been installed into your database. If not, make sure to run the create_webutil_db.sql script (located in %ORACLE_HOME%\forms) as the DB user who will be the owner of the WebUtil schema. Once the DB is ready, compile webutil.pll using Forms Builder or Forms Compiler. Once it is compiled, open up webutil.cfg located in %ORACLE_INSTANCE%\config\FormsComponent\forms\server. Scroll to the bottom and change the following settings:
transfer.database.enabled=TRUE
transfer.appsrv.enabled=TRUE
transfer.appsrv.workAreaRoot=
transfer.appsrv.accessControl=FALSE
After you save and close the file, you should be able to run any of your Oracle Forms which use WebUtil without a problem. Oracle Support note 1093985.1 contains more information about setting up WebUtil. Hope this helps!
Thanks,
Scott
http://pitss.com/us

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Configuration Problem in webdynpro using Custom containers

Similar Messages

Maybe you are looking for