Configuration Views from 3D Reviewer not converting correctly to pdf

Scenario:-
In 3D Reviewer, I create several configurations, all with the objects in the centre of the screen.
I export to pdf and activate in Reader to view the 3D.
In some, or all of the configuations, the views show incorrectly, sometimes blank because the objects are a long way out of screen view.
A workaround is in 3D Reviewer to go to each configuration in turn and move or pan the view a very small amount.
After doing that, the configurations in the pdf usually display ok.
Is there a way I can fix this, or is it a know bug?
thanks,
Ian

> we do want to create the pdfs from 3D Reviewer as we are using it to add PMI to our 3d models
well, since Acrobat/Reader use camera information from PDF, it may be possible to cut PRC from Reviewer produced PDF
and wrap it again into PDF with correct camera settings using some other tool.
In this way Reviewer does just the PMI part of the work, where it seems to be the only tool available.

Similar Messages

  • CJK characters are not converted correctly to PDF

    We are developing layout using SMARTFORMS. We are using standard function module 'CONVERT_OTFSPOOLJOB_2_PDF'  to convert the SMARTFORM to PDF. Chinese, Japanese, Korean characters are not displayed/Converted correctly in PDF documents. But in Spool these characters are showing correctly.
    Whereas German, Italian, French are displaying and printing correctly and converting properly to PDF.Please suggest a suitable
    note/correction for the above.

    Hello dear,
    Did you got a solution for this? Even i am facing the smae problem.
    Warm regards,
    Harshad.

  • I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

    You need to contact Adobe Customer Support :
    They will check and assist you. (Live Chat)
    Contact Customer Care

  • Not converting word to pdf

    I installed adobe acrobat 5.0 on window 2000 server but its not converting word to pdf when I click by toolbal button system hangs.

    AA5 is not licensed for use in the server mode. As long as Acrobat is not available for use off the server, only local use, you should be OK. Try to print from WORD to the Acrobat Distiller printer. If that does not work, then try printing to file. If that works, then open the file in Distiller to see if you get a PDF. If you do, then AcroTray is not running. It may be that AcroTray will not run properly on W 2000 Server. As I recall, some folks tried with the 2003 server and had problems.

  • My document did not convert correctly.  Can I fix it in the PDF version?

    My document did not save as it was originally written.  Can I fix it once it has been changed to a PDF?

    Hi iamreadytoscream,
    Did you use PDF Pack to convert a file to PDF? What was the original file format? And, can you provide a little detail about what didn't convert correctly?
    I think the best approach is to figure out why the file didn't convert correctly. You would need Acrobat to edit the PDF once it's created. And, as Acrobat isn't a word processor, it really isn't meant for major editing or formatting.
    Please tell me a bit more about the file that you converted and we'll go from there.
    Best,
    Sara

  • Imported Songs from Hard Drive Not Converting MP3 Tags Properly

    This is a problem that I am having with files that I am adding to iTunes with "File==>Add Folder To Library". These are mp3 files. I no longer have the CDs. The mp3 files and their tags (like song artist and album) are being read properly by Windows. However, when I add them to iTunes, sometimes only the song title gets applied. Tags like artist and album don't get transferred by iTunes. It doesn't happen with all files, but with the ones that it happens to, it does not get corrected if I try to add them a second time.
    Please help. I am sick of manually editing files in iTunes when Windows sees them just fine.
    Thanks!

    I'm not sure if I understand your question, but try this: Go to View menu and choose view options. Turn on the fields that you want to show.

  • Text layers not saved correctly as PDF from PS?

    I frequently save layouts I do in Photoshop as PDF's. Lately I very often will discover the text does not display correctly in the PDF. One or two lines of text will display as white with a thin black outline, rather than as the basic solid black I'd specified.
    I work on a Windows 7 machine with the current version of PS. The text is on layers when I save the file to PDF (from PS), but I do not include the layers in the PDF, so they should be flattening down.
    Any ideas why this happens? I noticed a few weeks ago when it was also doing this that I updated the program a day later and the PDF's were not exhibiting this issue. But, now it's starting again. A big timewaster for me.
    Thanks for any suggestions offered.

    Text doesn't flatten until you tell it to. In fact that may be the problem here - you are telling the PDF maker to not retain vector text and when it tries to flatten, some layer style or something else gets in the way. Try to play with the PDF options. also manaulyl flatten the document in PS before saving to PDF...
    Mylenium

  • File not converting correctly

    I downloaded a file several time to convert PDF to Excel.  The first line of the file is converted correctly and all subsequent lines are put in column A only and not separating into columns A thru F.

    I got it.....
    Thanks,
    Niki Shah

  • How to stop Preview from changing resolution when converting JPEGs into PDF

    I am combining several JPEGs of identical resolution into a PDF using Preview, using either the sidebar or Automator action (http://discussions.apple.com/thread.jspa?messageID=11893607). For some reason, Preview changes the resolution of the PDF so viewing it at actual size (100% zoom) is bigger and pixellated. Example: a 960x600 JPEG becomes approx 1355x845. I figured it had something to do with dpi and indeed if I do the calculation and open up each JPEG in Photoshop and resize (without resampling, i.e. without changing pixels) to 101.5, the resulting PDF is pretty close to what it should be. (Calculation = 1355/960 * 72dpi.) But the slight resize and recompression lowers quality, plus it's a huge pain to go through all of that for every image.
    This issue is the same for simple saving a single image, the combining and use of Automator script has no impact.
    My question, in summary: how do I get Preview to save a JPEG as a PDF without changing its resolution?

    I have the same problem. I have a bunch of scanned documents (jpeg), and have been trying to make them a multi page document, instead of 20+ images.
    Using the Automator "New PDF from Images" preview action v1.0, supplied by Apple with Snow Leopard, and I am able to convert the images to a PDF.
    Using these images, the first page being 1032 x 1600 pixels, and telling the automator action to +size each page to fit image+, I convert them into a PDF.
    Converted PDF is viewable here.
    The original JPG is clearly higher resolution than the PDF, and the PDF loses the crispness of the original scan. Even using "+size each page to fit image+" does not make the page the original image size.
    What's happening here, and does anyone know a better way to convert Jpegs to PDF on the Mac - and keep the image resolution? I don't care about files sizes here, but keeping resolution and maintaining quality.

  • Hyperlinks not saved correctly in PDF and Excel

    Hi,
    I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
    When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ).  Therefore the child report opens but prompts for inputs as not all the inputs are passed
    When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
    Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
    Regards
    Sameer

    Hello,
    I think this is a limitation in Excel where URL syntax has to be 255 characters or less
    In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
    A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
    Please let me know if it helps you
    Regards,
    Philippe

  • Internal Links in HTML Document Not Working Correctly in PDF

    I have an HTML document that contains internal links (basically a Table of Contents). When the document is displayed in a browser, the internal links work correctly. However, when I use Acrobat 8 Professional to create a PDF version from the HTML source, the links don't go to the correct place when clicked. It almost appears that they are off by one, e.g., link 7 goes to anchor 8. I can send the source document for you to look at if you email me at eharris -at- synnovation.com. I am not expert in HTML and perhaps the links/anchors are not done correctly when I create the HTML document. Does anyone have any ideas on this?

    This one has the same problem. For instance, "Anchor1" as <a name="Anchor1"> appears 13 times. I am sure that your problem is that Acrobat is going to the last occurance that is just before the first one. As I scan through the file I find similar results for all of the anchors. When I used Tidy, it reduces about 1350 errors to about 474, but that is still not too good. The validator is flagging a lot of identical IDs as well as unrecognized attributes (like ONSELECTSTART). The attributes correctly accepted by body are
    Attribute Specifications
    * BACKGROUND=URI (background image for document)
    * BGCOLOR=Color (background color for document)
    * TEXT=Color (text color for document)
    * LINK=Color (link color for document)
    * VLINK=Color (visited link color for document)
    * ALINK=Color (active link color for document)
    * ONLOAD=Script (document has been loaded)
    * ONUNLOAD=Script (document has been exited)
    as listed on htmlhelp.com for HTML 4. There may be some new ones in HTML 5, but I did not check.
    I am not looking at all of your HTML in detail, but there appears to be a lot of unneeded things based on the error messages from the validator. Many browsers will let you display the stuff (even Acrobat), but there may be errors that crop in when you do not expect it or on some other browsers that the one you check. Thus again, you should use a validator. If you are only off a few tags that might be fine, but when it is in the 1000s, there is an issue. It would also be good to break your page up into parts. It is good practice on web pages for each page to be not much more than one screen. That is often exceeded, but 59 screens of info (on my screen) is a bit much. The TOC is definitely needed in that case, but just was well go to a sub page just as well and make the info easier to track. A PDF (as you are trying to get) could be made of the entire system for those that want it all in one bit. Bill

  • Wingdings not exported correctly in PDF by Crystal Reports XI JRC in Linux

    I have a report that contains checkmark and scissor character from Wingdings/Wingdings 2. The PDF file is generated via a program using Crystal Reports' Java Reporting Component. When I am testing it in my machine (Windows), the checkmark and scissors characters are shown correctly. But using our Linux Redhat server generates a "P" instead of the checkmark and a quotation mark instead of the scissors.
    With the thought that Crystal Reports XI JRC do font indexing instead of subsetting/embedding, my idea was that there was no installed Wingdings font in the Linux server. I've replicated the case in my Windows machine by removing the Wingdings font.
    With that knowledge, I've installed the Wingdings (*.ttf files) font in the Linux server and executed commands like ttmkfdir (as instructed in some tutorials). I've verified that in Applications -> Preference -> Fonts that the Wingdings fonts are selectable. But when I generated again my PDF file, the correct fonts are still not rendered correctly. Is there anything more I need to do for the JRC to recognize the Wingdings font in Linux.
    Migrating to the Crystal Reports for Eclipse released last Jan 2009 is not a possible option.

    First check is to ensure the Java JVM can see the font.  The Java SDK comes with the JFC demo Font2DTest.  Do the fonts show up there?
    Note that the Java JRE has a lib/fonts directory, where you can place TrueType fonts that the JRE then would use.
    Sincerely,
    Ted Ueda

  • Excel borders not converting properly into PDF

    Hello,
    I am using Excel 2010 on a PC. I have a double line borders on all my tables. When I convert them to PDF the double lines blur together into one line unless I zoom out pass 100%. I thought I fixed the issue by making the border a darker color but when I imported the PDF into indesign they blur together again and most of them print out that way. (The document I am working on will eventually both be on the web and in print).
    This does not happen with every table and I can't figure out what the difference is between a table that works and one that doesn't. I've played around with the smooth lines with limited results. Below is one of the tables where the double line on top blurs together.
    Thanks!

    Are you printing or using PDF Maker? What job settings are you using? What version of Acrobat? Have you tried using the Press or Print job settings? There may also be an issue with the default display resolution used in the Settings (typically at 1200 dpi) -- I use 300 dpi.

  • IPhoto Library from 7.1.5 not converted correctly to 9.5, now shows up empty

    Hello all,
    My mother recently aquired a new MacBook Pro; the data from her old laptop was transferred by the company it was bought at. (not a fan of that, but I wasn't around to do that as I live quite far away)
    The previous laptop was running Lion and an old iPhoto (7.1.5), the new one is running Mavericks and iPhoto 9.5. When I opened iPhoto for the first time, it asked whether I wanted to convert the library, to which I replied I didn't at that time - and iPhoto quit as expected. I opened it with the option key pressed, to see whether there were any other libraries to choose from, and upon choosing the only one available, iPhoto simply opened. The problem is: it opened the library without converting it, meaning that I now have a 179GB library which iPhoto says is empty.
    I am aware that all photos are still there, but I would really like my mother not to have to rearrange all those photos by making a new library and moving them over (we're talking tens of thousands of photos).
    I have tried repairing permissions, repairing the database, rebuilding the database (all from the command-option boot of iPhoto) - all of which end up with the same empty library; I have tried the iPhoto Library Upgrader, which simply tells me that the library has already been updated for the current iPhoto version.
    In other words: is there a way to either make iPhoto re-read the contents, or manually convert the library?
    Best regards,
    KB

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Email Address Not Converting Correctly from .doc to .pdf

    I'm attempting to convert a Microsoft Word document to a PDF.  I have an email address in the footer of the document that reads [email protected] but when I convert it to a PDF, the hyperlink doesn't work correctly.  When I click on the hyperlink in the PDF, it brings up the email address as [email protected]  It completely cuts off the first name!  The full email address displays correctly, but when you click on it, it cuts off the entire first name before the period.
    Please help!

    Be sure you use PDF Maker for the conversion. If that does not help, put such addresses in quotes and see if that does the job.

Maybe you are looking for