File not converting correctly

I downloaded a file several time to convert PDF to Excel. The first line of the file is converted correctly and all subsequent lines are put in column A only and not separating into columns A thru F.

I got it.....
Thanks,
Niki Shah

Similar Messages

HELP....AVCHD / MPEG files not playing correctly!

I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively! I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on a standard timeline. Can anyone suggest anything to help please? Much appreciated!

Thanks for your reply, I ran it through Media Info. Here are the results:
Container & general information:
MPEG-PS: 290 Mib 4min22s
1 Video stream: MPEG video
1 Audio stream: AC-3
First Video Stream:
8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
First Audio Stream:
256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
Please let me know where to go from here. Thanks so much!
Date: Fri, 11 Nov 2011 10:50:15 -0700
From: [email protected]
To: [email protected]
Subject: HELP....AVCHD / MPEG files not playing correctly!
    Re: HELP....AVCHD / MPEG files not playing correctly!
    created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

I have canceled my account same day and joining because the convert PDF to word did not convert correctly how to get credit for cancelled membership

You need to contact Adobe Customer Support :
They will check and assist you. (Live Chat)
Contact Customer Care

File not formatted correctly error

Dear All,
when am trying to import a contract file as excel sheet, not CVs file, i get the error ( File not formatted correctly ). any advice?

the issue with date formatting would be corrected in Excel. When an export file that includes dates is opened in Excel, they get reformatted by the Excel program. In my experience, I have had to reformat those cells in Excel to the YYYY-MM-DD format and save the Excel file before I could import again into CM. But, if you are just exporting and then importing without opening the file in Excel, then the dates are not the problem. What are you exporting from CM? Are you trying to import into a different project or database than you exported from?

X2-02 camera issues - .nrw files not converting to...

I've got X2-02 and am experiencing the same problem on this link: http://discussions.nokia.com/t5/Cseries/C2-02-camera-issues-nrw-files-not-converting-to-jpeg-files/m...
I tried all of the tricks mentioned and nothing became fruitful in converting the files to jpeg (viewable on PC).
Anyone who has a solution to this, kindly post it here...!
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

imranshahab,
Welcome to Nokia Discussions!
Try this online image convertion site: http://bit.ly/1dyiDQm
Or try sending the .nrw files to another bluetooth capable phone and see if it does convert the file to jpeg after receiving it.
Good luck

I Paid for PDF Export and the files are not converting correctly

I purchased PDF Export to take a PDF file and convert it to a text file so I could import it into excel, when doing so I get a bunch of extra symbles plus the numbers that i'm trying to convert are not complete.

Could you try disabling the 'Recognize text' function and convert the file again?
Let us know how it goes!
-David

My document did not convert correctly. Can I fix it in the PDF version?

My document did not save as it was originally written. Can I fix it once it has been changed to a PDF?

Hi iamreadytoscream,
Did you use PDF Pack to convert a file to PDF? What was the original file format? And, can you provide a little detail about what didn't convert correctly?
I think the best approach is to figure out why the file didn't convert correctly. You would need Acrobat to edit the PDF once it's created. And, as Acrobat isn't a word processor, it really isn't meant for major editing or formatting.
Please tell me a bit more about the file that you converted and we'll go from there.
Best,
Sara

Part of Excel file not converting

I am batch creating Excel files to PDF using Adobe Acrobat Pro (9). My settings are such that all tabs convert, but I have "parts" of one of the worksheet tabs that do not fully create. In my Excel settings I am repeating columns A-D on each page and then approximately 5 columns of additional data show. However, in certain documents I only get the first 3 pages. I have done this successfully on another similar document template, and don't see any differences in the file page settings. Does anyone have a suggestion for how to ensure that Adobe "sees" all the columns in the sheet? Or, is there something I have done differently in the two templates and what is it?
I have hundreds of files to convert.

Upon further review, the other template is also not publishing correctly. If there are any number of pages past 3 that are required, the file will always be short, but by differing amounts. (Some files may be short 5, others are short 4). I have tried setting my default printer to Adobe and printing from Windows Explorer and choosing Convert to PDF from the right click menu (also in Explorer), but both these options will only convert the current page, not the entire workbook.
I am DESPERATE for a solution!

CJK characters are not converted correctly to PDF

We are developing layout using SMARTFORMS. We are using standard function module 'CONVERT_OTFSPOOLJOB_2_PDF' to convert the SMARTFORM to PDF. Chinese, Japanese, Korean characters are not displayed/Converted correctly in PDF documents. But in Spool these characters are showing correctly.
Whereas German, Italian, French are displaying and printing correctly and converting properly to PDF.Please suggest a suitable
note/correction for the above.

Hello dear,
Did you got a solution for this? Even i am facing the smae problem.
Warm regards,
Harshad.

Colors in pdf files not displayed correctly on linux acroread

I have recently observed that the colors in certain pdf files are not displayed correctly in acroread on Linux. Other readers such as evince get it right. Examples are a presentation with white arrows on a black background which come out as black on black. I suspect, but have not proved, that the files were produced on Mac OS. I see this in acroread version 9.5.1 on a couple of versions of Linux. I googled this but could find no-one else mentioning it. Has anyone else seen it. Looks like a serious bug to me.

Does this happen with other PDFs on the server? You might check out the Adobe forums.
Regards, Tim

Uploaded image files not displayed correctly

Hello everyone,
I used the following article(on o'reilly) as reference for file upload:
http://www.onjava.com/pub/a/onjava/2001/04/05/upload.html?page=1
While it works fine for most files types, there are problems with image files.(I am using PrintStream, BufferedOutputStream,FileOutputStream to write the files on the server).
When links to these image files are clicked, the uploaded gif and jpeg image files are not displayed correctly.When directly opening the files on the server, it gives a 'error opening file' message.But other word docs , text files do not give an error.
If anyone else has come across the same problem and could help out , I would appreciate it.
Thanks in advance.

I do not want to enter into the logic which you are following to upload the file. I did the upload process successfully even as a blob datatype.
For this I followed the logic given in http://www.java.isavvix.com/codeexchange/codeexchange-viewdetail.jsp?id=22.
Here you can download the complete sourse code, which is working fine for gif and jpeg, I tested.
Please go with this. Also let me know, if you still have problem.
Regards.

I tunes update 10.5 and music files not playing correctly

After I updated iTunes to 10.5, a vast majority of my music files do not play correctly. When they do play, they sound as if they have been super compressed and I cannot figure out why. I have un installed/re installed, checked all of my drivers and even scanned my library for viruses. Is there anyone who may have any info that may help fix this problem? I would be eternally grateful.

I have just downloaded a free program called burn and it burns music perfectly and yet itunes still wont work and comes up with the same error report as above so i do hope this helps apple to fix the bugs in there latest 10.5 itunes update.

Title set files not in correct physical order

Hi I was wondering if anyone could help. I have had a problem with a replication batch. The dvds play fine on some players but don't on others. The Master was checked for errors and came back as having its "title set files not in the correct physical order, a problem that may effect the playability". The discs were authored in DVDSPro 3 and I didn't think there was anyway to change the VTS order. If anyone can help it would be most appreciated as I need to supply a new ammended master.

15 times, eh, Jake?
I don't think so.
I know the approximate periodicy of this error in DVD SP generated output, and it's extremely rare. In fact, this "Title Set not in the correct order" rule (ID 420) of ImageAnalysis is listed by Eclipse as a DVD-Audio error.
In fact Dale, if you'd like, contact me through my website link below and I'll help you get this next submission perfect, at no charge - in exchange for letting me see just what the heck you did to that original Image!
You really need to let DVD SP generate a DDP Image and submit this next one already tested with Eclipse, and on DLT.
Let me know,
Trai
Trai Forrester
TFDVD Research Labs
http://www.DVDVerification.com

CS3 FW drop down menu files not eporting correctly

Drop down menu files are not exporting correctly.
Here's what happened:
1. I did a file save as to the PNG file (from subban11.png to
subban12.png)
2. Made changes to the drop down menu
3. Eported the file with the new name subban12
The result:
1. The html file was named correctly as subban12.html
2. All the supporting .gif files still had the old file name
(subban11... )
3. A new subban12.css file appeared that had never appeared
before when exporting
4. A new mm_css_menu.js file also appeared
Is there fix for this problem or has my .png file corrupted?
I did export a different .png drop down menu file and
everything worked properly.

Renee@CoP wrote:
> Hi Linda,
>
> Thanks for your reply. I'm pretty sure that I did not
change the format to
> CSS menus. I exported like I always do (control, shift,
x) without changing
> any of my settings. Could you let me how to export in
CSS format, so that I
> know what to avoid?
>
> Thx, Renee
Hi Renee,
I'm not presently working on a machine that has Fireworks CS3
installed
on it. From memory, choose File > HTML Setup. Under
General, check Use
CSS for Pop-up menus, and Write CSS to an External file.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

File not converting correctly

Similar Messages

Maybe you are looking for