Configure background job  for collective outbound delivery processing

Hello Gurus,
    I want to  Create a background job to be executed during off-peak hours for collective outbound delivery processing.  will you please give me step-by-step configuration ?
thanks very much!

To set up a batch job for delivery creation use SM36 T-code.
Input batch job name say - ZSD_CREATE_DELY_SALES_ORG
Select class = C or B.
Set up by / created by = BATCHADMIN or your id
Program Name = WS_DELIVERY_UPDATE
Varient = (as per your requirement - say for a particular sales area and plant)
Click on "Check" icon and "Save".
Go to the main page, select icon "Schedule a Batch job".
Give detils like daily, weekly or periodic or Immediate.
Enter date and time accordingly. Save it.
Same thing applies for Invoice creation batch job.
Use program name:RSBDCSUB
All other steps remain the same.
Hope this will help you out !
Regards,
Rajesh Banka

Similar Messages

  • Configuration for creat  auto background job to create outbound delivery

    Dear Experts,
    Kindly let me know where and how can I configure  auto background job for creating outbound delivery, TO and Print picking list
    Thanks in advance
    Shetty

    < Job for delivery creation:>
    1. you can run tcode vl10batch to schedule a job with your own variant.
    2. alternatively, you can directly schedule a job in SM36 -> program RVV50R10C, variant
    When define variant for background delivery creation, please make sure:
    - "Select rule" must be set to '2'.
    -  "F code profile" should be '5001' (Fcodes GET, PREPARE, SAMD should be included.)
    <Job for TO creation>
    1. Run tcode VL06p with your own varinat -> click button "create TO in background"
    2. Alternatively, you can directly define a job in SM36. -> program name WS_MONITOR_OUTB_DEL_PICK.
    <Job for printing pick list>
    1. run tcode VL70 with your own variant -> goto menu bar / program / execute in background -> then a job is created.
    2. Alternatively, you can schedule a job in SM36 -> program SD70AV4A.

  • Program works but background job for that program fails....

    I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
    To realize this I developed a report program which follows following logic.
    1)     First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
    2)     Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
    I converted these PO details to the XML file format that the third party people accept.
           In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
    3)     Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
    This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
    Now I tried to schedule a batch job for this and the batch job fails with follwing errors
    02/25/2009 15:08:47 Error in Control Framework
    Message Class  = FES         
    Message Number = 022  
    Message Type   = E
    02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE 
    Message Class  = 00        
    Message Number = 564  
    Message Type   = A                
    Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
    Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
    Regards,
    JEssica SAm

    Robert...Thanks for the reply...
    I am using follwing code
    l_xml_size = l_ostream->get_num_written_raw( ).
        CALL METHOD cl_gui_frontend_services=>gui_download
          EXPORTING
            bin_filesize = l_xml_size
            filename     = FILEPATH
            filetype     = 'BIN'
          CHANGING
            data_tab     = l_xml_table
          EXCEPTIONS
            OTHERS       = 24.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    Now what changes should i make..where should i store my XML file then instead of my desktop?
    and whih Function Module should i Use..

  • BPM - Background Job for Reorganization = Not Scheduled

    Good afternoon, first of all thank you very much for the support they can provide. I have developed a JDBC interface -> BPM (Multimapping) which works well. Modify a Message Mapping in the BPM that I use for an RFC Lookup, I have added the Configurable Parameters in the BPM and Integration Directory and everything works fine at design time. But when running the interface at run time the message reaches the BPM and the error "error in BPE inbound Permanent processing".
    I have reviewed the Business Process Engine in the RWB and the item is Red Schedule Background Job for Reorganization and detail reads: "Background Job for Reorganization = Not Scheduled".
    As I can solve this problem. Thank you very much.

    Re: Importing trans request failed
    Re: Transports Erroring
    Re: What is RDDIMPDP .....
    have a look it may help you
    Message was edited by:
            Vinod Udapudi
    Message was edited by:
            Vinod Udapudi

  • Problem with IDoc for an outbound delivery

    Dear All,
    I am facing a problem with the IDoc defined for an outbound delivery.
    Scenario:
    Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
    What I did:
    I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
    I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
    What I can do:
    I can issue an IDoc message, it looks ok and contains the standard data.
    Problem:
    It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
    Am I using the proper exit? I appreciate any suggestions.
    Thanks,
    Grzegorz Skorus

    Hello Grzegorz
    Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
    Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases,  it may help you.
    Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
    Futher  the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
    Hope this helps and others will pitch in.
    1498409 - Valuation Type unavailable when creating deliveries using IDOC
    631913 - Exit after formatting delivery IDoc type DELVRY

  • Handling Unit not being assigned to TO for an outbound delivery

    Hi All
    When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO.
    I cannot confirm the TO as it complains about the non assignment of HU.
    I have done the following so far:
    1. Set up a default packing material w.r.t WhNo and movement type.
    2. Defined a packing group and then assigned the packing group to the packing material.
    3. Set 1 to the indicator for automatic HU creaion in customizations for automatic HU creation.
    Is there something I am missing in the configuration?
    Any suggestions would help.
    Thanks,
    Arup

    Hello,
    HU never get assign at the time of creation of TO. You can assign pick HU at the time of confirmation of TO. There are two ways
    Use transaction code LH01 and assign pick HU
          OR
    (ii)Or at the time of confirmation of TO click on pack tab and complete the packing
    Thanks,
    Milind C

  • Automatic workflow customizing :Schedule background job for condition evalu

    Hai,
    I have one problem in automatic customizing SWU3(Maintain runtime environment)-Schedule background job for condition evaluation.
    How to turn  green tick from red cross? All other steps are OK in SWU3 except this problem.
    Please give me some tips.
    -Jaheer
    _______Thanks in terms of BIG points_______________________

    Hi Jaheer
    If the only red cross is next to the condition evaluation job, I suppose you could just schedule up the job automatically in SM36. Just be sure that the RFC Destination is correctly configured.
    The program that you need to schedule is <b>RSWWCOND</b>. The SAP default is to call the job SWWCOND and schedule it to run every 30min. That should get rid of the red cross. And if not, you might find along the way why the Auto-Customising didn't work.
    Cheers
    Lyal

  • Outbound Delivery Processing - mix of serialized and non-serialized product

    Has anyone configured the outbound delivery processing scenario in AII to handle a mix of serialized and non-serialized products? How do you handle packing & loading transactions where you have a mix of serialized and non-serialized products in the same shipment?

    Closed..
    Thanks

  • Can we change the selection criteria for RV60SBAT Background Job for Billin

    We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
    Thanks,
       Matt

    Hi Matt
    For your requirement , copy the standard  RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
    Regards
    Srinath

  • BackGround Job for Transaction VF06

    Hi Experts,
    We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
    Allthough running this transaction Manually creates Invoice with same variant.
    Kindly help me on this.
    Thanks and Regards,
    Neha Kapoor

    Hi,
    I have the seen the Log it tells:
    Date       Time     Message text                                                                 Message class Message no. Message type
    29.06.2008 22:00:48 Job started                                                                       00           516          S
    29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
    29.06.2008 22:00:48 Job finished                                                                      00           517          S
    But Invoices are not getting created.
    Thanks and Regards,
    Neha Kapoor

  • Can ABAP proxy to consume WSDL file be run as background job for every10min

    Hi all,
    I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
    So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
    So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
    I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
    I have a little bit of confusion and want to know few things.
    1)     Should I create a web service or should I consume a web service?
    2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
    3)     Is there a difference between consuming an XML file and WSDL File?
    Any Help will be highly appreciated.
    Regards,
    Jessica.

    There are two options (as I know) to generate XML file.
    1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
    Test XML generation program is:
    types: begin of ty_data,
           num   type i,
           end   of ty_data.
    DATA: itab TYPE standard table of ty_Data,
          la_data like line of itab,
          xmlstr TYPE string.
    DO 3 TIMES.
      la_data-num = sy-index.
      APPEND la_data TO itab.
    ENDDO.
    CALL TRANSFORMATION ztest_np1
      SOURCE table = itab
      RESULT XML xmlstr.
    CALL FUNCTION 'DISPLAY_XML_STRING'
      EXPORTING xml_string = xmlstr.
    My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
    <?sap.transform simple?>
    <tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
      <tt:root name="table"/>
      <tt:template>
        <table>
          <tt:loop ref=".table">
            <item>
              <tt:value ref="NUM"/>
            </item>
          </tt:loop>
        </table>
      </tt:template>
    </tt:transform>
    XML string is like:
      <?xml version="1.0" encoding="utf-8" ?>
      <table>
      <item>1</item>
      <item>2</item>
      <item>3</item>
      </table>
    To use this option, you have to create a transformation and than use it to generate the XML string.
    Check this SAP Help
    http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
    2. You can concatenate and create an XML string and download that string into a file.
    Regards,
    Naimesh Patel

  • Error in Schedule Background Job for Deadline Monitoring of swu3

    While Auto Customization swu3 i am getting error message 'Output device "" not known' in 'Schedule Background Job for Deadline Monitoring'
    Please advice what could be cause of it

    the earlier problem of background job was solved by changing the  output device assigned to user wf-batch .
    regarding the transport request :
    when i was trying to execute the step : "Schedule bakgrd for missed deadlines " MANUEL it was giving me an option of SAVE AND SCHEDULE . which was creating the transport request . but when i executed it automatically it worked fine without asking a request to me ... i don't know why )-: ... probablly we can specify a different interval then the standard of three minutes and which will be transported (it's just a guess) . i have  executed it  automatically ...
    well thanks all for u r help

  • Schedule a background job for a program using ABAP code.

    Hi,
    I have to write a program to schedule a background job for another program.
    Need your help to understand how we can achieve this functionality.Any example of an abap code would be of great help.
    Need it urgently.
    Thanks in advance.
    Sandeep.

    Hi Sandeep,
    Here is the demo program regarding the BDC For the background job.
    report zprprbdc1
           no standard page heading line-size 255.
    include bdcrecx1.
    parameters: dataset(132) lower case.
    ***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
    *   If it is nessesary to change the data section use the rules:
    *   1.) Each definition of a field exists of two lines
    *   2.) The first line shows exactly the comment
    *       '* data element: ' followed with the data element
    *       which describes the field.
    *       If you don't have a data element use the
    *       comment without a data element name
    *   3.) The second line shows the fieldname of the
    *       structure, the fieldname must consist of
    *       a fieldname and optional the character '_' and
    *       three numbers and the field length in brackets
    *   4.) Each field must be type C.
    *** Generated data section with specific formatting - DO NOT CHANGE  ***
    ***data: begin of itab occurs 0 ,
    ***       matnr(20) type c,
    ***       mbrsh(30) type c,
    ***       mtart(30) type c,
    ***       kzsel(20) type c,
    ***       maktx(40) type c,
    ***       meins(5) type c,
    ***       end of itab.
    data: begin of record occurs 0,
    * data element: MATNR
            matnr_001(018),
    * data element: MBRSH
            mbrsh_002(001),
    * data element: MTART
            mtart_003(004),
    * data element: XFELD
            kzsel_01_004(001),
    * data element: MAKTX
            maktx_005(040),
    * data element: MEINS
            meins_006(003),
    * data element: MTPOS_MARA
            mtpos_mara_007(004),
          end of record.
    *** End generated data section ***
    start-of-selection.
    *perform open_dataset using dataset.
    perform open_group.
    **do.
    **read dataset dataset into record.
    **if sy-subrc <> 0. exit. endif.
    call function 'GUI_UPLOAD'
      exporting
        filename                      = 'c:\jitu\bdc\10002.txt'
       filetype                      = 'ASC'
       has_field_separator           = 'x'
    *   HEADER_LENGTH                 = 0
    *   READ_BY_LINE                  = 'X'
    *   DAT_MODE                      = ' '
    *   CODEPAGE                      = ' '
    *   IGNORE_CERR                   = ABAP_TRUE
    *   REPLACEMENT                   = '#'
    *   CHECK_BOM                     = ' '
    *   VIRUS_SCAN_PROFILE            =
    *   NO_AUTH_CHECK                 = ' '
    * IMPORTING
    *   FILELENGTH                    =
    *   HEADER                        =
      tables
        data_tab                      = record
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_READ_ERROR               = 2
    *   NO_BATCH                      = 3
    *   GUI_REFUSE_FILETRANSFER       = 4
    *   INVALID_TYPE                  = 5
    *   NO_AUTHORITY                  = 6
    *   UNKNOWN_ERROR                 = 7
    *   BAD_DATA_FORMAT               = 8
    *   HEADER_NOT_ALLOWED            = 9
    *   SEPARATOR_NOT_ALLOWED         = 10
    *   HEADER_TOO_LONG               = 11
    *   UNKNOWN_DP_ERROR              = 12
    *   ACCESS_DENIED                 = 13
    *   DP_OUT_OF_MEMORY              = 14
    *   DISK_FULL                     = 15
    *   DP_TIMEOUT                    = 16
    *   OTHERS                        = 17
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    loop at record .
    perform bdc_dynpro      using 'SAPLMGMM' '0060'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RMMG1-MATNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RMMG1-MATNR'
                                  record-matnr_001.
    perform bdc_field       using 'RMMG1-MBRSH'
                                  record-mbrsh_002.
    perform bdc_field       using 'RMMG1-MTART'
                                  record-mtart_003.
    perform bdc_dynpro      using 'SAPLMGMM' '0070'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSICHTAUSW-DYTXT(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                                  record-kzsel_01_004.
    perform bdc_dynpro      using 'SAPLMGMM' '4004'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    perform bdc_field       using 'MAKT-MAKTX'
                                  record-maktx_005.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MARA-MEINS'.
    perform bdc_field       using 'MARA-MEINS'
                                  record-meins_006.
    perform bdc_field       using 'MARA-MTPOS_MARA'
                                  record-mtpos_mara_007.
    perform bdc_transaction using 'MM01'.
    **enddo.
    endloop.
    perform close_group.
    *perform close_dataset using dataset.
    &*****************Reward point if helpful************&

  • Error in background job for program RSGET_SMSY error message No active job

    Hello!
    I would like to set up the Change Request Management functionality in SAP Solution Manager.
    The only red warning by executing Test-button in Tcode “SOLAR_ADMIN_PROJECT” is:
    <b>Error in background job for program RSGET_SMSY error message No active job found</b>
    Can someone please tell me how to solve this problem?
    (tcodes, technical steps)
    Thank you very much!
    regards
    Thom

    Thank you very much!
    Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
    The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
    according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
    Thank you!
    regards

  • How to deactivate *Schedule Background Job for Work Items with Errors* SWU3

    Hello Guys,
    Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
    Currently it is green which I don't want. I want to stop this service.
    Regards
    NK

    Hello,
    You could also just stop the job in tx SM37.
    But why would you want to do this? As a test?
    regards
    Rick Bakker
    hanabi technology

Maybe you are looking for