CONFIGURE DATABASE  IN ARCHIVE MODE

Hai
I am just trying to change the database to archive mode.As part of this I need to set the parameter LOG_ARCHIVE_START to TRUE in the init.ora file.But I am not able to find this parameter in the init.ora file(any of the archive parameter for that matter).Please advise where can I find and set LOG_ARCHIVE_START parameter.
Thanks
Jay

LOG_ARCHIVE_DEST
Parameter type
String
Syntax
LOG_ARCHIVE_DEST = filespec
Default value
Null
Parameter class
Dynamic: ALTER SYSTEM
Range of values
Any valid path or device name, except raw partitions
Real Application Clusters
Multiple instances can have different values.
Note:
For Enterprise Edition users, this parameter has been deprecated in favor of the LOG_ARCHIVE_DEST_n parameters. If Oracle Enterprise Edition is not installed or it is installed, but you have not specified any LOG_ARCHIVE_DEST_n parameters, this parameter is valid.
LOG_ARCHIVE_DEST is applicable only if you are running the database in ARCHIVELOG mode or are recovering a database from archived redo logs. LOG_ARCHIVE_DEST is incompatible with the LOG_ARCHIVE_DEST_n parameters, and must be defined as the null string ("") or (' ') when any LOG_ARCHIVE_DEST_n parameter has a value other than a null string. Use a text string to specify the default location and root of the disk file or tape device when archiving redo log files. (Archiving to tape is not supported on all operating systems.) The value cannot be a raw partition.
If LOG_ARCHIVE_DEST is not explicitly defined and all the LOG_ARCHIVE_DEST_n parameters have null string values, LOG_ARCHIVE_DEST is set to an operating system-specific default value on instance startup.
To override the destination that this parameter specifies, either specify a different destination for manual archiving or use the SQL*Plus statement ARCHIVE LOG START filespec for automatic archiving, where filespec is the new archive destination. To permanently change the destination, use the statement ALTER SYSTEM SET LOG_ARCHIVE_DEST = filespec, where filespec is the new archive destination.
Neither LOG_ARCHIVE_DEST nor LOG_ARCHIVE_FORMAT have to be complete file or directory specifiers themselves; they only need to form a valid file path after the variables are substituted into LOG_ARCHIVE_FORMAT and the two parameters are concatenated together.
See Also:
Oracle9i User-Managed Backup and Recovery Guide
"LOG_ARCHIVE_DUPLEX_DEST", "LOG_ARCHIVE_MIN_SUCCEED_DEST", and "V$ARCHIVE_DEST" for more information on setting this parameter
Your Oracle operating system-specific documentation for the default value and for an example of how to specify the destination path or filename using LOG_ARCHIVE_DEST
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch191.htm#REFRN10085
Joel Pérez

Similar Messages

  • Cloning 10g Database in archive mode - How add new created archive files

    Deat all
    I want to clone oracle 10g database using hot backup. database in archive mode.
    Database is running user data entry contifue, during hot backup there are aproximatly 3 to 5 new archive log created. Please guide me how add these new created archive log in cloning process.
    Thanks
    Alter system switch logfile;
    SQL> select max(first_change#) scn from v$archived_log;
    SCN
    8592924
    alter tablespace tablespace1 begin backup;
    alter tablespace tablespace2 begin backup;
    alter tablespace tablespace3 begin backup;
    alter tablespace tablespace1 end backup;
    alter tablespace tablespace2 end backup;
    alter tablespace tablespace3 end backup;
    select name from v$archived_log where first_change# >= 8592924 order by name
    NAME
    F:\ARCHIVELOGS\ARC00390_0664080689.001
    F:\ARCHIVELOGS\ARC00391_0664080689.001
    F:\ARCHIVELOGS\ARC00392_0664080689.001
    create pfile='init<new database sid>.ora' from spfile;
    alter database backup controlfile to trace as '/home/oracle/cr_<new sid>.sql'
    STARTUP NOMOUNT
    CREATE CONTROLFILE SET DATABASE "ORCL" RESETLOGS FORCE LOGGING NOARCHIVELOG
    MAXLOGFILES 50
    MAXLOGMEMBERS 5
    MAXDATAFILES 100
    MAXINSTANCES 1
    MAXLOGHISTORY 453
    LOGFILE
    GROUP 1 'E:\oracle/oradata/dg9a/redo01.log' SIZE 100M,
    DATAFILE
    Edited by: Naeem Sheeraz on Nov 15, 2008 12:54 PM

    When you attempt to startup the cloned database on the new server you will find that it needs recovery -- because it was taken in hot backup mode.
    That is why you need to copy the archivelogs that are generated from the first archivelog after the first "alter tablespace begin backup" to the first archivelog after the last "alter tablespace end backup".
    I see that you are also including a CREATE CONTROLFILE script.
    You would run that at the cloned environment.
    Then you would issue the RECOVER DATABASE USING BACKUP CONTROLFILE UNTIL CANCEL command to make the clone consistent.
    You can, of course, use the same method to copy these archivelogs as you use to copy database files -- tar, cpio, tape, etc.

  • Test cold backup database in archive mode

    Hello,
    We doing every week a cold backup from Oracle database, us database is in archive mode.
    We would like to test us cold backup in other server but the drive where we have to copy
    the datafiles and logs and rollback are different on this server.
    In the production server the oracle_home and the oracle_sid:
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    ORACLE_SID=ENCY
    and on the other server to test the backup are:
    ORACLE_HOME=I:\oracle\product\10.2.0\db_2
    ORACLE_SID=ENCY
    Can somebody help me saying please the steps that I have to follow to restore the database in other server
    to test if the last cold backup is fine?
    My understand is copy the files(datafiles, log files, control files, pfile,...) in the new server, when everything is copied into new server,
    I have to:
    Modify the parameter CONTROL_FILES in the pfile
    Mount the database and rename the datafiles and redolog files
    Thanks.

    user641364 wrote:
    Hello,
    We doing every week a cold backup from Oracle database, us database is in archive mode.
    We would like to test us cold backup in other server but the drive where we have to copy
    the datafiles and logs and rollback are different on this server.
    In the production server the oracle_home and the oracle_sid:
    ORACLE_HOME=E:\oracle\product\10.2.0\db_1
    ORACLE_SID=ENCY
    and on the other server to test the backup are:
    ORACLE_HOME=I:\oracle\product\10.2.0\db_2
    ORACLE_SID=ENCYThe only difference between servers is different ORACLE_HOME path?
    All other directories are the same?
    >
    Can somebody help me saying please the steps that I have to follow to restore the database in other server
    to test if the last cold backup is fine?
    My understand is copy the files(datafiles, log files, control files, pfile,...) in the new server, when everything is copied into new server,
    I have to:
    Modify the parameter CONTROL_FILES in the pfile
    Mount the database and rename the datafiles and redolog filesYou shoud modify and rename only in case if path to datafiles, redologs, controlfiles, dump, archive log directories is different on test server.
    If that will be the same, then no need to rename.
    If it is different, then modify pfile in order to meet correct one paths.

  • Recovery in archive mode, but no archived logs

    Hi,
    I hope someone can help me with the following question.
    I have a 9.2 database in archive mode. Suppose on t=t0 I make an online backup. At the end of this run, I will do an "alter system switch logfile" statement to capture the latest transactions (more or less also at t=t0). Later, at t=t1 we do some transaction and more archived redologs are created. At t-t2 I need to restore the complete database, but I have LOST all the archive files as from t=t0. Now the question is, is it still possible to recover (even it means to go back to t=t0)? I have tried it, but always the system suggests to apply the (missing) archived redo's, and it seems I cannot escape this. But, Is it possible to get back to t=t0?
    Thanks a lot, for any clue or pointer !

    If you take a hot backup and you lose the redo logs, you have a fundamentally inconsistent backup. Each tablespace will be internally consistent, but they probably won't have the same SCN as the control files, so you'll get this message.
    Do you have an earlier hot backup and the archived logs that would restore that backup to the point in time (t=0) where you took the latest hot backup? Personally, I generally like to keep at least 2 or 3 old backups, with archived log files, just in case something goes wrong with the most recent backup.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • ORA-00257: archiver error. and database is noarchivelog mode

    Hi,
    I've a Oracle 10.2.0.4 64bit database under Windows. The database has been from the beginning in noarchive log mode. How is it possible it's generating ora-0257 errors?
    regards,
    Ivan

    Helios and oradba,
    This is the output of archive list:
    SQL> archive log list;
    Database log mode No Archive Mode
    Automatic archival Disabled
    Archive destination d:\oradata\DBN\arch
    Oldest online log sequence 5249
    Current log sequence 5251
    On D: there is 10 Gbyte free space. And the error in the alert-log is:
    Thu Oct 06 08:30:37 2011
    Errors in file d:\oracle\product\10.2.0\admin\dbn\bdump\dbn_j000_3612.trc:
    ORA-12012: error on auto execute of job 143
    ORA-00257: archiver error. Connect internal only, until freed.
    Ivan

  • Switching database to archive log mode

    1.When I switch the database to archive log mode,
    I have to do full offline(consistent) backup.
    2.When the database is working in archive log mode
    I can do inconsistent(online) backups.
    Why is there consistent backup needed after swiching
    to archive log mode, is there not inconsistent backup
    enough after switching (the databease operates
    in archive log mode and as in point 2 I can make inconsistent backups).

    Hello,
    Oracle recommands to do offline backup after switching to archivelog as an immediate crash-recovery procedure. Look at the following example:
    1/ You switch your base to archivelog.
    2/ Work is started right away.
    3/ Your DB crashes => You got your archived redo logs, but none of the other files.
    Now, let's put a
    1b/ Backup (offline) your database.
    Now, in 3, youg got everything you need to restore the base, because 3 can happen WHILE your are ONLINE Backing up the base.
    That's the point.
    Regards,
    Yoann.

  • Database Archiving mode

    Hello all,
    we are in upgrading BW 3.0B to BW 3.5 on MS Sql 2000. In the part of post upgrade activities, we need to check database archiving mode whether it is inactivation mode or disabled mode. How to check this? if it is disabled, how to activate database archive log mode?
    Kindly help us.
    kind regards,
    Aruna,

    Hi
    Right click on the SAP database in Enterprise Manager - it is called the <SID> of your BW system.
    There are three modes availabling - Simple, Bulk or Full.
    You should set the mode to Full.
    Thanks
    N.P.C

  • Archive mode in destination database for own way stream

    Hi Experts,
    I set up a one way stream for oracle 10GR2 in window 2003.
    I know that i need to turn on archive mode for capture and propagation in source database machine.
    Do we need to turn on archive mode on in destination database machine? It is only running apply process.
    Any suggestion?
    Thanks,
    Jim

    No Jim, If you are using one way stream replication, that it doesn't need archiving to be enabled at destination site.
    Only the site from where changes are being captures need archiving to be on.
    Regards,
    Dipali..

  • SP 2013 Upgrade error - web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode.

    Hi there,
    I get this error when I perform a DB Attach upgrade from SharePoint 2010 to SharePoint 2013. 
    "web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode."
    Any help is appreciated. Thanks.

    There is other way of fixing this issue apart from what Amit mentioned. Create a classic based web application in SP 2013 using PowerShell.
    New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "sppoc\spfarm") -Port 100 -URL "http://sp2013demo"
    Now mount the content database from SP 2010 on to the web application created above 
    Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
    Once the mount is complete, convert the web application to use claims and migrate the user to use claims identity.
    Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
    $w = Get-SPWebApplication "http://sp2013demo:100"
    $w.MigrateUsers($True)
    See my blog post about it: http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
    Please remember to up-vote or mark the reply as answer if you find it helpful.

  • Starting Physically Standby Database in Mount Mode

    Hi All
    I have configured Data Guard using Oracle 10g 10.2.0.4.0 (64 bits) on Windows 2008 Server (64 bits) Release 2 Enterprise.
    Data guard configuration was OK as the message from "Enable Configuration DG1" was "SUCCESS" for both
    Primary and Standby Database. I have also set both Databases and TNS to start Automatically whenever Windows Starts.
    The Problem is as long as the Standby Server is running, there is No issue.
    But when we Restarts the Backup Server, Physically Standby Database is Started and TNS is also Started,
    but Archives  are not received until I physically do the following steps so that it can received the Archives.
    SQL> startup nomount;                                                                                                                
    SQL> alter database mount standby database;                                                                 
    SQL> alter database recover managed standby database disconnect from session;
    Is there a way to start Physically Standby Database in Mount mode when windows started.
    Regards
    Thunder2777

    Hi Mihael
    I have created 2 files. 1 Bat file 2nd sql file which contains all commands as written above.
    When I execute start.bat file
    1. set ORACLE_HOME=C:\oracle\product\10.2.0\db_1
    2. set ORACLE_SID=UMISBK
    3. sqlplus / [email protected]
    1 & 2 executed properly. At 3 it just display SQL help for login as shown below.
    SQL*Plus: Release 10.2.0.4.0 - Production
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Usage 1: sqlplus -H | -V
        -H             Displays the SQL*Plus version and the usage help.
        -V             Displays the SQL*Plus version.
    Usage 2: sqlplus [ [<option>] [<logon>] [<start>] ]
      <option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
    It Did Not execute start.sql file to excute sql commands.
    Regards
    Thunder2777

  • Datagurd configuring in high protection mode

    Hi gurus,
    I am forllowing, the following method to configure dataguard in oracle 11g r2 on oel 5.5
    startup;
    archive log list;Database is in archive log.
    select name from v$datafile;all datafiles, redolog files, controlfile are in /u01/app/oracle/sales directory
    alter database force logging;
    alter database add standby logfile '/u01/app/oracle/sales/stdredo01.log' size 50m;
    alter database add standby logfile '/u01/app/oracle/sales/stdredo02.log' size 50m;
    alter database add standby logfile '/u01/app/oracle/sales/stdredo03.log' size 50m;
    alter database add standby logfile '/u01/app/oracle/sales/stdredo04.log' size 50m;
    create pfile from spfile;
    shut immediate;
    startup mount;
    alter database create standby controlfile as '/u01/app/oracle/sales/stdcon.ctl';
    shut immediate;
    exitoracle]$mkdir stdsales
    oracle]$mkdir -p admin/stdsales/adump
    oracle]$mkdir -p flash_recovery_area/stdsales
    oracle]$mkdir -p flash_recovery_area/STDSALES
    oracle]$mkdir -p arch stdarch
    oracle]$cd sales
    oracle]$cp *.* /u01/app/oracle/stdsales
    dbs]$vi initsales.ora
    *.log_archive_dest_1='location=/u01/app/oracle/arch'
    *.log_archive_dest_2='service=stdsales lgwr sync affirm'
    *.standby_file_management=auto
    *.log_archive_dest_state_1=enable
    *.log_archive_dest_state_2=enable
    *.db_unique_name=sales
    *.fal_server=sales
    *.fal_client=stdsales
    oracle]$cp initsales.ora initstdsales.ora
    oracle]$vi initstdsales.ora
    *.log_archive_dest_1='location=/u01/app/oracle/stdarch'
    *.log_archive_dest_2='service=sales lgwr sync affirm'
    *.standby_file_management=auto
    *.log_archive_dest_state_1=enable
    *.log_archive_dest_state_2=enable
    *.db_unique_name=stdsales
    *.fal_server=sales
    *.fal_client=stdsales
    *.db_file_name_convert='/u01/app/oracle/sales/','/u01/app/oracle/stdsales/'
    *.log_file_name_convert='/u01/app/oracle/sales/','/u01/app/oracle/stdsales/'
    oracle]$cp orapwsales orapwstdsales
    netservice name is created for sales and stdsales databases.
    standby side:
    startup nomount;
    alter database mount standby database;
    alter database recover managed standby database;Primary side:
    startup mount;
    alter database set standby database protected;
    alter database open;end of the communication error
    so many times configured but not successed. i don't know where i am doing wrong.
    can you please help to configure database in high protection mode.
    thank you!

    $vi initsales.ora
    *.log_archive_dest_1='location=/u01/app/oracle/arch'
    *.log_archive_dest_2='service=stdsales lgwr sync affirm'There is a problem in your log_archive_dest_1 and log_archive_dest_2 parameters.
    log_archive_dest_1='location=/u01/app/oracle/arch
    valid_for=(all_logfiles,all_roles)
    db_unique_name=<db-unique-name of primary db>
    log_archive_dest_2='service=stdsales
    valid_for=(online_logfiles,primary_role)
    db_unique_name=<db-unique-name of standby>
    You can refer this http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ps.htm
    Also
    standby side:
    startup nomount;
    alter database mount standby database;
    alter database recover managed standby database;The command should be "*alter database recover managed standby database disconnect from session*" on standby side for the archivelogs to be applied on the standby database from the primary DB and not "alter database recover managed standby database".

  • Failed to create configuration database on Sharepoint Foundation 2010 install under Windows 7

    Configuration Failed
    Failed to create the configuration database.
    An exception of type System.IO.FileNotFoundException was thrown. Additional exception information:could not load file or assembly 'Microsoft.IdentityModel, version = 3.5.0.0,culture=neutral, PublicKey Token=31bf3856ad364e35' or one of its dependencies. The
    system cannot find the files specified.
    I already installed microsoft sharepoint foundation 2010 but I got the error as per above.How to solve this problem?

    Hi,
    Also check out Bill Baer's post:
    Common Microsoft SharePoint Server 2010 Installation Issues and Resolutions
    http://blogs.technet.com/b/wbaer/archive/2009/12/11/common-microsoft-sharepoint-server-2010-installation-issues-and-resolutions.aspx
    Thanks.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Sharepoint server 2013 configuration issue - failed to create configuration database

    Hi All,
    I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
    Some system configuration & info:
    - 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
    - 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
    - All of PCs were satisfied the requirement of Sharepoint server 2013
    - Firewall turned off & No antivirus tool was installed.
    - During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
    - During configuration, created a new farm with a domain user account.
    - Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
    ATTEMPTS:
    1. Tried install and set up all of steps with just 1 account - domain administrator.
    2. Tried with separate domain account:
    - SQL Service account use for:
    + Install SQL server 2008
    + Connect all SQL services
    + Admin for SQL server
    - Setup account use for:
    + Member of local administrator group in PC2
    + Install Sharepoint
    + Run Configuration wizard
    + Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
    + Was choose for the database account in configuration database step
    Also tried with SQL service account in this step.
    3. Tried with Standalone mode for Sharepoint installing
    4. Trie with domain name: Brainfiniti.local
    5. Tried with some another solution from topic relate to database configuration in our community but not successful.
    But all attempts are failed at this configuration database step :'(
    Please correct me if I am going wrong by missing something or do I need to start/install some services.
    Screenshot Attached
    Sorry! Cannot add screenshot because my account is still not verified. Will add later.
    LOG ENTRY:
    01/23/2013 06:58:28  1  INF        Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
    01/23/2013 06:58:28  1  INF          Found a task by the name of adminvs in the task collection
    01/23/2013 06:58:28  1  INF          Entering function TaskCommon.GenerateRandomUnUsedPort
    01/23/2013 06:58:28  1  INF            Entering function TaskCommon.EnsureIIs
    01/23/2013 06:58:28  1  INF              Entering function PreRequisiteChecks.IsIisInstalled
    01/23/2013 06:58:28  1  INF                Entering function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF                  Version of IIS is 7
    01/23/2013 06:58:28  1  INF                Leaving function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF              Leaving function PreRequisiteChecks.IsIisInstalled
    01/23/2013 06:58:28  1  INF              Entering function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF                Version of IIS is 7
    01/23/2013 06:58:28  1  INF              Leaving function PreRequisiteChecks.IsRightVersionOfIis
    01/23/2013 06:58:28  1  INF              Entering function ServiceHelper.Start
    01/23/2013 06:58:28  1  INF                Trying to start service W3SVC and waiting 180 sec to do so
    01/23/2013 06:58:28  1  INF                service W3SVC is Running, nothing to do
    01/23/2013 06:58:28  1  INF                starting service W3SVC (it may already be started)
    01/23/2013 06:58:28  1  INF              Leaving function ServiceHelper.Start
    01/23/2013 06:58:28  1  INF            Leaving function TaskCommon.EnsureIIs
    01/23/2013 06:58:28  1  INF            Trying to see if port 40993 is free on machine APP.  Min port we will try is 1024, Max port we will try is 49151
    01/23/2013 06:58:30  1  INF            A SocketException was thrown with
    SocketError ConnectionRefused
    01/23/2013 06:58:30  1  INF            Connect has been refused for port 40993, so we will consider this a free port
    01/23/2013 06:58:30  1  INF            Have not found a free port yet.  Number of tries is 1.  Min port we will try is 1024, Max port we will try is 49151
    01/23/2013 06:58:30  1  INF            Adding port 40993 to the exclusion list so it is not chosen again during this run
    01/23/2013 06:58:30  1  INF          Leaving function TaskCommon.GenerateRandomUnUsedPort
    01/23/2013 06:58:30  1  INF        Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
    I just post a part of its logs which contain "error" string because it's too long.
    According this log, there is a error in port connection but i've turned firewall off ???
    Please help me with this mix up :'(
    p/s: sorry for my English!
    Thanks,
    Hien Hoang

    Below is the logs entry with "ERR" marked line:
    01/23/2013 07:03:17  9  INF                    Now joining to farm at server app.brainfiniti.com database SharePoint_Config
    01/23/2013 07:04:12  9  ERR                    Task configdb has failed with an unknown exception
    01/23/2013 07:04:12  9  ERR                    Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
    be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                      Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                        Resource id to be retrieved is ExceptionInfo for language English (United States)
    01/23/2013 07:04:12  9  INF                        Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. 
    Additional exception information: {1}
    01/23/2013 07:04:12  9  INF                      Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                    Leaving function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  INF                      Entering function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                        Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                          Resource id to be retrieved is ExceptionInfo for language English (United
    States)
    01/23/2013 07:04:12  9  INF                          Resource retrieved id ExceptionInfo is An exception of type {0} was thrown. 
    Additional exception information: {1}
    01/23/2013 07:04:12  9  INF                        Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                      Leaving function Common.BuildExceptionMessage
    01/23/2013 07:04:12  9  INF                    Leaving function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  ERR                    An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception
    information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                    Entering function Common.BuildExceptionInformation
    01/23/2013 07:04:12  9  INF                    Entering function TaskBase.OnTaskStop
    01/23/2013 07:04:12  9  INF                      Creating the OnTaskStop event for task configdb
    01/23/2013 07:04:12  9  ERR                      Task configdb has failed
    01/23/2013 07:04:12  9  INF                      friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  9  INF                      debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  9  INF                      Entering function TaskBase.FireTaskStateChanged
    01/23/2013 07:04:12  9  INF                        Firing the OnTaskStateChanged event for task configdb
    01/23/2013 07:04:12  9  INF                        Entering function TaskDriver.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                            Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
    for language English (United States)
    01/23/2013 07:04:12  9  INF                            Resource retrieved id ConfigurationDatabaseTaskDisplayName
    is configuration database
    01/23/2013 07:04:12  9  INF                          Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  9  INF                          Received an TaskStateEventHandler event.  task:configdb TaskBase.State:stopped
    01/23/2013 07:04:12  9  INF                          Entering function TasksQueue.IncrementTaskFailed
    01/23/2013 07:04:12  9  INF                            Incremented the number of tasks failed to 1
    01/23/2013 07:04:12  9  INF                          Leaving function TasksQueue.IncrementTaskFailed
    01/23/2013 07:04:12  9  INF                          Task configdb has stopped and failed.  Total failed is now 1
    01/23/2013 07:04:12  9  INF                        Leaving function TaskDriver.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                        Entering function PsconfigBaseForm.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Invoking the UI thread with the task state chagne event
    01/23/2013 07:04:12  1  INF                          Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
    01/23/2013 07:04:12  1  INF                            Received an TaskStateEventHandler event.  task:configdb
    TaskBase.State:stopped TaskBase.TaskResultconfigdb
    01/23/2013 07:04:12  1  INF                            Acquiring the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Releasing the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Acquiring the reader lock to retrieve the state
    01/23/2013 07:04:12  1  INF                            Releasing the reader lock to retrieve the state
    01/23/2013 07:04:12  1  ERR                            Task configdb has stopped and failed.  Total failed
    is now 1
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    disconnect
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter disconnect in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    connect
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter connect in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function Command.this[string key]
    01/23/2013 07:04:12  1  INF                              Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                                Found value in collection for key
    create
    01/23/2013 07:04:12  1  INF                              Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  1  INF                              Found parameter create in collection
    01/23/2013 07:04:12  1  INF                            Leaving function Command.this[string key]
    01/23/2013 07:04:12  1  INF                            Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  1  INF                              Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
    for language English (United States)
    01/23/2013 07:04:12  1  INF                              Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
    is Failed to create the configuration database.
    01/23/2013 07:04:12  1  INF                            Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  1  INF                            Updating the task label below the progress bar Failed to
    create the configuration database.
    01/23/2013 07:04:12  1  INF                            Entering function FormParameterCollection.Add
    01/23/2013 07:04:12  1  INF                            Leaving function FormParameterCollection.Add
    01/23/2013 07:04:12  1  INF                            Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
    was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Not running in high contrast, so we will paint the background
    with our trademarked image
    01/23/2013 07:04:12  1  INF                            Updating the task additional notification information below
    the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception information: Some or all identity references could not be translated.
    01/23/2013 07:04:12  1  INF                          Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
    01/23/2013 07:04:12  9  INF                          Sleeping an extra 1 ms so things don't go too fast for the user for this
    task
    01/23/2013 07:04:12  1  INF                          Not running in high contrast, so we will paint the background with our
    trademarked image
    01/23/2013 07:04:12  9  INF                        Leaving function PsconfigBaseForm.TaskStateEventHandler
    01/23/2013 07:04:12  9  INF                      Leaving function TaskBase.FireTaskStateChanged
    01/23/2013 07:04:12  9  INF                    Leaving function TaskBase.OnTaskStop
    01/23/2013 07:04:12  9  INF                  Leaving function TaskThread.ExecuteTask
    01/23/2013 07:04:12  4  INF                  Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  INF                    Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
    01/23/2013 07:04:12  4  INF                    Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
    01/23/2013 07:04:12  4  INF                  Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  ERR                  Task configuration database failed, so stopping execution of the engine
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key disconnect
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter disconnect in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key connect
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter connect in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function Command.this[string key]
    01/23/2013 07:04:12  4  INF                    Entering function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                      Found value in collection for key create
    01/23/2013 07:04:12  4  INF                    Leaving function CommandCollectionBase.Get
    01/23/2013 07:04:12  4  INF                    Found parameter create in collection
    01/23/2013 07:04:12  4  INF                  Leaving function Command.this[string key]
    01/23/2013 07:04:12  4  INF                  Entering function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  INF                    Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
    (United States)
    01/23/2013 07:04:12  4  INF                    Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
    database.
    01/23/2013 07:04:12  4  INF                  Leaving function StringResourceManager.GetResourceString
    01/23/2013 07:04:12  4  ERR                  Failed to create the configuration database.
    An exception of type System.Security.Principal.IdentityNotMappedException was thrown.  Additional exception information: Some or all identity references could not be translated.
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
       at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
       at System.Security.Principal.NTAccount.Translate(Type targetType)
       at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
       at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
       at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
       at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    01/23/2013 07:04:12  4  INF                  Entering function TaskDriver.NotifyTaskSummary

  • How to set the database in NOARCHIVELOG mode

    hellow world,
    I knewly joined this organization.
    Our database is very small < 4GB data.
    Database is running in ARCHIVELOG MODE.
    since we are not keeping any physical backup, so I opted to run the datbase in NOARCHIVELOG mode.
    For bringing the database in NOARCHIVE MODE, I simply changed the init.ora parameter LOG_ARCHIVE_START = FALSE and restart the database.
    offcourse the archiving stopped, but to my strange after 30 to 40 minutes my all log files filled an error message is being displayed to the server, saying
    log files are filled, waiting for the archiving, Oh my God, What has happened, All users came to my head, DATABASE HANGED, NOT RESPONSING.
    SIR, MY QUESTION IS
    WHAT FOR ALL LOG FILES WAITING?
    when i am saying NOARCHIEVE than
    please explain me, where i committed mistake. I am new to ADMINISTRATION.

    1. Not keeping any physical backup is all the more reason to stay in archivelog mode.
    2. You need to shutdown the database, startup mount, and issue 'alter database noarchivelog', the alter database open.

  • How to recover the data from a  dropped table in production/archive mode

    How to recover the data/change on a table that was dropped by accident.
    The database is on archive mode.

    Oracle Version. ? If 10g.
    Try this Way
    SQL> create table taj as select * from all_objects where rownum <= 100;
    Table created.
    SQL> drop table taj ;
    Table dropped.
    SQL> show recyclebin
    ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE  DROP TIME
    TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
    SQL> flashback table taj to before drop;
    Flashback complete.
    SQL> show recyclebin;
    SQL> desc taj;
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_ID                                          NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL>M.S.Taj

Maybe you are looking for

  • Calling a method of servlet

    How to call a method of servlets like we do in struts like "get.do?method=getData". I know servlets are called defacult method either dopost or doget are called but can i call any other in the servlet and if yes how can i do that?

  • Payment terms on BOM

    Hi Gurus, I created an SO but changed the sold-to party on VA02, thus changing the payment terms of every item, except the BOM components.  This caused a delivery split. Can you tell me on how can I have the same payment terms for Bom header and BOM

  • How can I deauthorize a computer from an account that isn't mine?

    One of my sister's ex-friends authorized my family's computer and I need to deauthorize it.I have no clue how to and my sister's old friend isn't allowed over to our house anymore.Can you tell me how to deauthorize it?

  • LR 4.4, camera raw version 7.4 will not display Sony .ARW files

    I have LR 4.4 on my Mac, camera raw 7.4 version.  It can not display sony's ARW files (raw) from my Sony alpha 6000.  Any solutions?L

  • Clarification Adapter-Process task association

    Hi, yet another basic question... I have built my IT resource+resource object+adapters+provisioning process. This is for study purpose. The user get`s correctly created. What is now not clear to me is how can I tell to OIM which process task to use f