Configure/view AWR and ADDM reports

our production server 11.1.0.7 (db) is running on redhat 5.3.
how i can configure/view AWR and ADDM reports for this from my local machine
please reply

the AWR snapshots in 10g are automatically taken after every 1 hour by default , am i right ?
YES
some reference.
http://www.oracle-base.com/articles/10g/AutomaticWorkloadRepository10g.php

Similar Messages

How to use awr and addm reports

Hi,
to use awr and addm reports does we should have separate license or oracle server software license is enough.
which tool do we use to read this awr and addm reports in real time.
please give your valuable suggestions.
thank you!

Seeing as you seem to want to continue the discussion on someone else's old thread rather than your own one
AWR files in oracle
If i don't then it is difficult to find the queries thata re related to my application as most of those are the sysqueries, i just need schema specific queries in the SQL ordered by Elapsed Time section. Perhaps you are using the wrong tool?
A system-level report like AWR or ADDM is no use to you as it seems your application code is not significant at the system level.
You might want to consider tracing the sessions from your application using client_id or module to identify sessions belonging to your application then possibly use TRCSESS and TKPROF.

AWR and ADDM in general

Hi,
where can I find good easy material on net fro AWR and ADDM with examples and scenarios.
Thanks
rgds
saaz

Once you've run the ADDM report, I don't think you need any help deciphering it, it's pretty straight forward. The only question you need to ask is whether the recommendation is significant.
For AWR interpretation, this is largely the same as Statspack. In addition to the links provided by others above, you may find this resource useful:
[Connie Dialeris Green: Diagnosing Performance Bottlenecks using Statspack and The Oracle Performance Method|http://www.oracle.com/technology/deploy/performance/pdf/statspack_opm4.pdf]

Roles and Privileges for 10g AWR and ASH reports

Are there specific roles and privileges are required for one to run AWR and ASH reports for users who don't have DBA roles? If so, I would like to know about them.

I think sysdba privilege need to run AWR report.
Also check, how privilege is granted to PERFSTAT user in $ORACLE_HOME/rdbms/admin/spcuser.sql, you might get some clue!!!
Cheer,
Virag

How do I mark complete based on slide views only and not report a score

I am having a problem with the e-learning modules that I am producing in Captivate 4 (and previously 3). The modules do not contain any quiz and I am only interested in having them report a complete/incomplete based on if the user have viewed 80% of the slide. I am not really interested in reporting any score since I am not using a quiz.
Currently the courses gets marked as complete but with a score of 0%, which obiously some users find strange..
Since I only have the option to change the score reporting to be based on score or percenatge I am trying to find where I can change the imsmanifest to send the score - BLANK or NULL instead of 0. I have been looking through the imsmanifest it self and the files in the scorm support folder - but cannot figure where I would do this change.
Any suggestions?

Hi Andrew,
I tried this with a slight change in the code (I think there where a / when commenting out the second line of the code):
} else if ( strFSCmd == "LMSSetValue" || strFSCmd=="SetValue") {
// AEC: OVERRIDE BEHAVIOR
if(strFSArg1.indexOf("raw") > -1)
strErr = "";
} else if (strFSArg1.indexOf("max") > -1) {
strErr = "";
} else if (strFSArg1.indexOf("min") > -1) {
strErr = "";
} else {
strErr = eval('g_objAPI.' + strFSCmd + '(\"' + strFSArg1 + '\",\"' + strFSArg2 + '\");');
// AEC: END OVERRIDE BEHAVIOR
CaptivateObj.SetVariable(strFSArg3, strErr);
However for some reason my LMS still report a score (this time 100% which is much better than 0...) on the course that I tested this on. I was expecting no score to be sent. Can this be due to how the LMS is interpreting what is being sent or is there something that I am missing?
One more question - in which folder do I find the SCORM.htm template file? I thought it was a great idea to create a custom on and was looking for it in the progam file on my compter - but couldn't find it...

Privilege to create AWR and Statspack report to normal user

Hello,
I want to give right to one of the database user to create STATSPACK report in one database (no license there) and and to generate AWR report in other (licensed diagnostic+tuning pack).
Is there any privilege which I can give to create these reports only. I mean on a safe side ...
@?/rdbms/admin/spreport privilege to generate STATSPACK
@?/rdbms/admin/awrrpt privilege to generate AWR report.
Thanks a lot.
Best Regards

Hi,
Check the grants again, seems you missed some grant. check the test here
SQL> create user test identified by test;
User created.
SQL> grant create session to test;
Grant succeeded.
SQL>
SQL> GRANT SELECT ON SYS.V_$DATABASE TO TEST;
GRANT SELECT ON SYS.V_$INSTANCE TO TEST;
GRANT EXECUTE ON SYS.DBMS_WORKLOAD_REPOSITORY TO TEST;
GRANT SELECT ON SYS.DBA_HIST_DATABASE_INSTANCE TO TEST;
GRANT SELECT ON SYS.DBA_HIST_SNAPSHOT TO TEST;
GRANT ADVISOR TO TEST;
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
Grant succeeded.
SQL>
SQL> conn test/test
Connected.
SQL> @?/rdbms/admin/awrrpt.sql
Current Instance
~~~~~~~~~~~~~~~~
   DB Id    DB Name      Inst Num Instance
1667776968 DDTEST              1 ddtest
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: html
Type Specified: html
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   DB Id     Inst Num DB Name      Instance     Host
* 1667776968        1 DDTEST       ddtest       vnode
Using 1667776968 for database Id
Using          1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Enter value for num_days: 1
Listing the last day's Completed Snapshots
for statspack user you can check the script spcreate.sql for details
HTH

Structure to view monthly and quaterly report urgent

Hi All,
Jan-07 Feb-07 Mar 07 Q1-07 Avg Apr 07 May 07 June 07 Q2-07 Avg Jul-07 Aug-07 Sep-07 Q3-07 Avg Oct 07 Nov-07 Dec 07 Q4-07 Avg Closing 07
Dec 06 Jan-07 Feb-07 Avg Q1-07 Ytd Mar 07 Apr 07 May 07 Avg Q2-07 Ytd Jun-07 Jul-07 Aug-07 Avg Q3-07 Ytd Sep-07 Oct 07 Nov-07 Avg Q4-06 Ytd "Dec 07
pm Jan08"
dis is the structure v need to create can it b possible plz throw some light on this. v r not using any variable for this report.
Thanx in Advance
Priya

You should have 0calmonth a 0calquarter in your cube, then put 0calmonth below 0calquarter. Then supress total for 0calmonth and visible for 0calquarter and set calculate result as average.

Script to generate awr and e-mail to the user

Hi ,
Can someone help me with the script to generate AWR report and e-mail to customer on a daily basis?
OS:AIX 6.1
DB:11.2.0.2

http://www.gokhanatil.com/2011/07/create-awr-and-addm-reports-and-send.html
http://nadeemmohammed.wordpress.com/2011/10/27/generate-awr-reports-automatically-script/
Generate Statspack report automatically once per day
Your answer in above link(s), just read,understand and try to implement. If problem continue post here, we are here 24x7, but first show us yours efforts.
Regards
Girish Sharma

ADDM Report is not produced by SQL DEV 4.0 if logged in user does not have SYSDBA privilege

Hello -
In SQLDEV 4.0 (Early Adapter), I logged in as user with no SYSDBA privilege granted. But ADVISOR granted and execute on DBMS_ADDM granted and "select any dictionary" granted, etc.
Then i go to the menu View --> DBA --> Performance --> Automatic Database Diagnostic Monitor
Select ADDM report from the available choices.
Out of 3 menu options: Summary, Findings and ADDM Report, I can see the first two, but I am getting a grey screen for ADDM Report.
^^^^^^^^^^^^^^^^^^^^^
If i do exactly the same but login as SYSDBA, then ADDM Report can be produced and can be seen. So the issue is in the missing grants and privileges.
^^^^^^^^^^^^^^^^^^^^^^
The goal that we are pursuing in our shop is to empower developers to work with ADDM reports by having them login as non-SYSDBA user.
^^^^^^^^^^^^^^^^^^^^^^^^
Please advise what privilege should be granted to get this working for non-SYSDBA login
The same user can successfully execute $ORACLE_HOME/rdbms/admin/addmrpt.sql and produce file with complete ADDM report. But not able to get the ADDM from SQL DEV 4.0
Thank you,
vr

Thank you, Phil.
This worked for me in my quick test case.
Great help, as DBA group wants to allow NON-privileged users (like Developers and QA) to execute ADDM on demand.
Here is my observation for RAC database with two instances.
I have followed your instructions:
"Performance / Automatic Database Diagnostic Monitor -> Run ADDM"
Then
- Uncheck box "By Creating New Snapshot" (this box was checked by default)
- Provide new "Task Name" (let's say "vr1")
- Select "Start Snapshot" (this is where my first confusion is: each screen shot # is shown twice, may be because i have two instances of RAC)
- Select "End Snapshot" (the same way: each SNAP_ID is shown twice)
- and finally APPLY button is pressed
This creates 3 reports:
vr1
vr1$1 (for instance_id=1)
vr1$2 (for instance_id=2_
So, my question is: this expected and normal behavior of the tool?
What if my RAC database has 8 instances? Then I would generate 9 separate ADDM reports?
Is this correct observation?
Thank you,
vr

ADDM Report is not produced if logged in user does not have SYSDBA privilege

Hello -
In SQLDEV 4.0 (Early Adapter), I logged in as user with no SYSDBA privilege granted. But ADVISOR granted and execute on DBMS_ADDM granted and "select any dictionary" granted, etc.
Then i go to the menu View --> DBA --> Performance --> Automatic Database Diagnostic Monitor
Select ADDM report from the available choices.
Out of 3 menu options: Summary, Findings and ADDM Report, I can see the first two, but I am getting a grey screen for ADDM Report.
^^^^^^^^^^^^^^^^^^^^^
If i do exactly the same but login as SYSDBA, then ADDM Report can be produced and can be seen. So the issue is in the missing grants and privileges.
^^^^^^^^^^^^^^^^^^^^^^
The goal that we are pursuing in our shop is to empower developers to work with ADDM reports by having them login as non-SYSDBA user.
^^^^^^^^^^^^^^^^^^^^^^^^
Please advise what privilege should be granted to get this working for non-SYSDBA login
Thank you,
vr

Thank you, Phil.
This worked for me in my quick test case.
Great help, as DBA group wants to allow NON-privileged users (like Developers and QA) to execute ADDM on demand.
Here is my observation for RAC database with two instances.
I have followed your instructions:
"Performance / Automatic Database Diagnostic Monitor -> Run ADDM"
Then
- Uncheck box "By Creating New Snapshot" (this box was checked by default)
- Provide new "Task Name" (let's say "vr1")
- Select "Start Snapshot" (this is where my first confusion is: each screen shot # is shown twice, may be because i have two instances of RAC)
- Select "End Snapshot" (the same way: each SNAP_ID is shown twice)
- and finally APPLY button is pressed
This creates 3 reports:
vr1
vr1$1 (for instance_id=1)
vr1$2 (for instance_id=2_
So, my question is: this expected and normal behavior of the tool?
What if my RAC database has 8 instances? Then I would generate 9 separate ADDM reports?
Is this correct observation?
Thank you,
vr

Workflows 2013 and SQL Report Services: Configure on Independent Servers or Existing App Servers?

Currently, my SharePoint 2013 Farm has Workflows 2013 and SQL Report Services installed on app servers, along with other applications. Workflows 2013 isn't working correctly (installed prior to my coming on board with the organization), I'm assuming it
is a configuration issue, but rather than re-configure, I've read that is recommended to be a standalone server. It was also recommended by a MSFT rep that our report services have its own independent server. Currently, Report Services is also installed on
an app server that runs other applications on the farm.
Has anyone had any experience with installing Workflows 2013 and/or SQL Report Services on independent vs. existing application servers?
Additionally, my existing application servers have 24 GB of RAM (I believe the recommendation for SharePoint production environments is 12 GB), should I plan for the potentially new servers (Workflows and Report Services) to also have 24 GB of RAM? Not really
sure if it will be needed if they have dedicated tasks.
Thanks for any input you can provide!

It entirely depends on load. WFM will work just fine installed on servers in the SharePoint farm. SSRS preferably should go on the end-user facing servers for better performance.
The questions you're asking are all "it depends" :)
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cannot generate AWR/ADDM reports in Oracle 10g

Hi,
We are running 10.2.0.3.0 and troublshooted the performance problem for some queries. But when tried to run AWR/ADDM reports from OEM and got the following messages:
Insufficient Data in Interval. For displaying data on this page, two historical snapshots are needed. Make sure that two snapshots are present in the target database instance. In addition modify the interval so that it is contained within two available snapshots
I checked the scheduled jobs in this DB,
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Oracle Label Security and Data Mining options
SQL> select JOB_NAME from dba_scheduler_jobs;
JOB_NAME
PURGE_LOG
FGR$AUTOPURGE_JOB
GATHER_STATS_JOB
AUTO_SPACE_ADVISOR_JOB
Has anyone anyidea why AWR/ADDM reports cannot be run? Thanks
Liz

Hi,
If you want you can execute snapshot at your required time as suggested by people.
However Oracle 10g by default take snap at every one hour.
To check
select snap_id, to_char(BEGIN_INTERVAL_TIME,'DD-MON-YYYY HH24:MI') BEGIN_INTERVAL_TIME,
to_char(END_INTERVAL_TIME,'DD-MON-YYYY HH24:MI') END_INTERVAL_TIME
from dba_hist_snapshot
You can generate AWR Report by executing following SQL, Connect as SYS
SQL> @$ORACLE_HOME/rdbms/admin/awrrpt.sql
Input required details it asks, you can get AWR report in HTML or text format.
ADDM Report:
@$ORACLE_HOME/rdbms/admin/addmrpt.sql

Statspack, awr, addm reports

Hi every one,
what is the difference between statspack, awr, addm reports and how these report are going to analyze and how these reports are going to use in real time.
please let me know.
thank ypu!

851707 wrote:
Hi every one,
what is the difference between statspack, awr, addm reports and how these report are going to analyze and how these reports are going to use in real time.
The very major difference between Statspack and the other reports is that the former one is a free one and all the rest, require a licence before you can legally use them. For the usage of both the types of reports, please read the entire series for the same written by Jonathan Lewis on http://jonathanlewis.wordpress.com/statspack-examples/
HTH
Aman....

Automating AWR & ADDM Reports

Just wanted to check, if anybody has done... Automatic Generation of AWR & ADDM report. I want send the report to all the dba's in the team every six hours... Is there a way to call through cron Job....Want to pass parameter last hours snapshot id and snapshot_id -6...
Only if you have done...pl. answer otherwise ignore...
Thanks

select output from
table(dbms_workload_repository.&fn_name( :dbid,
inst_num,
bid, :eid,
rpt_options ));
Figure out what you need from there. Wrap spool
around it for your directory, mail it off when done.nice little script Steven.
Niall Litchfield
http://www.orawin.info/

How to configure a shell and tube heat exchanger with Lab VIew to get data

HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.

It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

Configure/view AWR and ADDM reports

Similar Messages

Maybe you are looking for